net/ena: use napi_complete_done() return value

Do not unamsk interrupts if we are in busy poll mode.
Signed-off-by: Netanel Belgazal <netanel@annapurnalabs.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/amazon/ena/ena_netdev.c

@@ -1122,26 +1122,40 @@ static int ena_io_poll(struct napi_struct *napi, int budget)
 	tx_work_done = ena_clean_tx_irq(tx_ring, tx_budget);
 	rx_work_done = ena_clean_rx_irq(rx_ring, napi, budget);
 
-	if ((budget > rx_work_done) && (tx_budget > tx_work_done)) {
-		napi_complete_done(napi, rx_work_done);
+	/* If the device is about to reset or down, avoid unmask
+	 * the interrupt and return 0 so NAPI won't reschedule
+	 */
+	if (unlikely(!test_bit(ENA_FLAG_DEV_UP, &tx_ring->adapter->flags) ||
+		     test_bit(ENA_FLAG_TRIGGER_RESET, &tx_ring->adapter->flags))) {
+		napi_complete_done(napi, 0);
+		ret = 0;
 
+	} else if ((budget > rx_work_done) && (tx_budget > tx_work_done)) {
 		napi_comp_call = 1;
-		/* Tx and Rx share the same interrupt vector */
-		if (ena_com_get_adaptive_moderation_enabled(rx_ring->ena_dev))
-			ena_adjust_intr_moderation(rx_ring, tx_ring);
 
-		/* Update intr register: rx intr delay, tx intr delay and
-		 * interrupt unmask
+		/* Update numa and unmask the interrupt only when schedule
+		 * from the interrupt context (vs from sk_busy_loop)
 		 */
-		ena_com_update_intr_reg(&intr_reg,
-					rx_ring->smoothed_interval,
-					tx_ring->smoothed_interval,
-					true);
+		if (napi_complete_done(napi, rx_work_done)) {
+			/* Tx and Rx share the same interrupt vector */
+			if (ena_com_get_adaptive_moderation_enabled(rx_ring->ena_dev))
+				ena_adjust_intr_moderation(rx_ring, tx_ring);
+
+			/* Update intr register: rx intr delay,
+			 * tx intr delay and interrupt unmask
+			 */
+			ena_com_update_intr_reg(&intr_reg,
+						rx_ring->smoothed_interval,
+						tx_ring->smoothed_interval,
+						true);
+
+			/* It is a shared MSI-X.
+			 * Tx and Rx CQ have pointer to it.
+			 * So we use one of them to reach the intr reg
+			 */
+			ena_com_unmask_intr(rx_ring->ena_com_io_cq, &intr_reg);
+		}
 
-		/* It is a shared MSI-X. Tx and Rx CQ have pointer to it.
-		 * So we use one of them to reach the intr reg
-		 */
-		ena_com_unmask_intr(rx_ring->ena_com_io_cq, &intr_reg);
 
 		ena_update_ring_numa_node(tx_ring, rx_ring);