Commit b16c71c9 authored by Neil Armstrong's avatar Neil Armstrong Committed by Kevin Hilman

ARM64: dts: meson-gx: Add AO CEC nodes

This patch adds the AO CEC node in all the HDMI enabled boards DTS.
Signed-off-by: default avatarNeil Armstrong <narmstrong@baylibre.com>
Signed-off-by: default avatarKevin Hilman <khilman@baylibre.com>
parent 7fd2c355
......@@ -121,6 +121,13 @@ hdmi_connector_in: endpoint {
};
};
&cec_AO {
status = "okay";
pinctrl-0 = <&ao_cec_pins>;
pinctrl-names = "default";
hdmi-phandle = <&hdmi_tx>;
};
&cvbs_vdac_port {
cvbs_vdac_out: endpoint {
remote-endpoint = <&cvbs_connector_in>;
......
......@@ -378,6 +378,12 @@ clkc_AO: clock-controller {
};
};
cec_AO: cec@100 {
compatible = "amlogic,meson-gx-ao-cec";
reg = <0x0 0x00100 0x0 0x14>;
interrupts = <GIC_SPI 199 IRQ_TYPE_EDGE_RISING>;
};
sec_AO: ao-secure@140 {
compatible = "amlogic,meson-gx-ao-secure", "syscon";
reg = <0x0 0x140 0x0 0x140>;
......
......@@ -171,6 +171,13 @@ cvbs_vdac_out: endpoint {
};
};
&cec_AO {
status = "okay";
pinctrl-0 = <&ao_cec_pins>;
pinctrl-names = "default";
hdmi-phandle = <&hdmi_tx>;
};
&ethmac {
status = "okay";
pinctrl-0 = <&eth_rmii_pins>;
......
......@@ -151,6 +151,13 @@ hdmi_connector_in: endpoint {
};
};
&cec_AO {
status = "okay";
pinctrl-0 = <&ao_cec_pins>;
pinctrl-names = "default";
hdmi-phandle = <&hdmi_tx>;
};
&cvbs_vdac_port {
cvbs_vdac_out: endpoint {
remote-endpoint = <&cvbs_connector_in>;
......
......@@ -108,6 +108,12 @@ hdmi_connector_in: endpoint {
};
};
&cec_AO {
status = "okay";
pinctrl-0 = <&ao_cec_pins>;
pinctrl-names = "default";
hdmi-phandle = <&hdmi_tx>;
};
&cvbs_vdac_port {
cvbs_vdac_out: endpoint {
......
......@@ -307,6 +307,11 @@ spifc: spi@8c80 {
};
};
&cec_AO {
clocks = <&clkc_AO CLKID_AO_CEC_32K>;
clock-names = "core";
};
&clkc_AO {
compatible = "amlogic,meson-gxbb-aoclkc", "amlogic,meson-gx-aoclkc";
};
......
......@@ -97,6 +97,13 @@ hdmi_connector_in: endpoint {
};
};
&cec_AO {
status = "okay";
pinctrl-0 = <&ao_cec_pins>;
pinctrl-names = "default";
hdmi-phandle = <&hdmi_tx>;
};
/* P230 has exclusive choice between internal or external PHY */
&ethmac {
pinctrl-0 = <&eth_pins>;
......@@ -124,7 +131,6 @@ external_phy: ethernet-phy@0 {
};
};
&hdmi_tx {
status = "okay";
pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
......
......@@ -67,6 +67,13 @@ hdmi_connector_in: endpoint {
};
};
&cec_AO {
status = "okay";
pinctrl-0 = <&ao_cec_pins>;
pinctrl-names = "default";
hdmi-phandle = <&hdmi_tx>;
};
&hdmi_tx {
status = "okay";
pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
......
......@@ -55,6 +55,13 @@ blue {
};
};
&cec_AO {
status = "okay";
pinctrl-0 = <&ao_cec_pins>;
pinctrl-names = "default";
hdmi-phandle = <&hdmi_tx>;
};
&cvbs_vdac_port {
cvbs_vdac_out: endpoint {
remote-endpoint = <&cvbs_connector_in>;
......
......@@ -140,6 +140,13 @@ hdmi_connector_in: endpoint {
};
};
&cec_AO {
status = "okay";
pinctrl-0 = <&ao_cec_pins>;
pinctrl-names = "default";
hdmi-phandle = <&hdmi_tx>;
};
&cvbs_vdac_port {
cvbs_vdac_out: endpoint {
remote-endpoint = <&cvbs_connector_in>;
......
......@@ -71,6 +71,13 @@ hdmi_connector_in: endpoint {
};
};
&cec_AO {
status = "okay";
pinctrl-0 = <&ao_cec_pins>;
pinctrl-names = "default";
hdmi-phandle = <&hdmi_tx>;
};
&cvbs_vdac_port {
cvbs_vdac_out: endpoint {
remote-endpoint = <&cvbs_connector_in>;
......
......@@ -43,6 +43,7 @@
#include "meson-gx.dtsi"
#include <dt-bindings/clock/gxbb-clkc.h>
#include <dt-bindings/clock/gxbb-aoclkc.h>
#include <dt-bindings/gpio/meson-gxl-gpio.h>
#include <dt-bindings/reset/amlogic,meson-gxbb-reset.h>
......@@ -207,6 +208,11 @@ mux {
};
};
&cec_AO {
clocks = <&clkc_AO CLKID_AO_CEC_32K>;
clock-names = "core";
};
&clkc_AO {
compatible = "amlogic,meson-gxl-aoclkc", "amlogic,meson-gx-aoclkc";
};
......
......@@ -113,6 +113,13 @@ hdmi_connector_in: endpoint {
};
};
&cec_AO {
status = "okay";
pinctrl-0 = <&ao_cec_pins>;
pinctrl-names = "default";
hdmi-phandle = <&hdmi_tx>;
};
&cvbs_vdac_port {
cvbs_vdac_out: endpoint {
remote-endpoint = <&cvbs_connector_in>;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment