Commit b1a07b47 authored by Tero Kristo's avatar Tero Kristo Committed by Mike Turquette

CLK: TI: add autoidle support

TI clk driver now routes some of the basic clocks through own
registration routine to allow autoidle support. This routine just
checks a couple of device node properties and adds autoidle support
if required, and just passes the registration forward to basic clocks.
Signed-off-by: default avatarTero Kristo <t-kristo@ti.com>
Acked-by: default avatarTony Lindgren <tony@atomide.com>
Signed-off-by: default avatarMike Turquette <mturquette@linaro.org>
parent f38b0dd6
Binding for Texas Instruments autoidle clock.
Binding status: Unstable - ABI compatibility may be broken in the future
This binding uses the common clock binding[1]. It assumes a register mapped
clock which can be put to idle automatically by hardware based on the usage
and a configuration bit setting. Autoidle clock is never an individual
clock, it is always a derivative of some basic clock like a gate, divider,
or fixed-factor.
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
Required properties:
- reg : offset for the register controlling the autoidle
- ti,autoidle-shift : bit shift of the autoidle enable bit
- ti,invert-autoidle-bit : autoidle is enabled by setting the bit to 0
Examples:
dpll_core_m4_ck: dpll_core_m4_ck {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&dpll_core_x2_ck>;
ti,max-div = <31>;
ti,autoidle-shift = <8>;
reg = <0x2d38>;
ti,index-starts-at-one;
ti,invert-autoidle-bit;
};
dpll_usb_clkdcoldo_ck: dpll_usb_clkdcoldo_ck {
#clock-cells = <0>;
compatible = "ti,fixed-factor-clock";
clocks = <&dpll_usb_ck>;
ti,clock-div = <1>;
ti,autoidle-shift = <8>;
reg = <0x01b4>;
ti,clock-mult = <1>;
ti,invert-autoidle-bit;
};
......@@ -520,6 +520,9 @@ int omap2_clk_enable_autoidle_all(void)
list_for_each_entry(c, &clk_hw_omap_clocks, node)
if (c->ops && c->ops->allow_idle)
c->ops->allow_idle(c);
of_ti_clk_allow_autoidle_all();
return 0;
}
......@@ -539,6 +542,9 @@ int omap2_clk_disable_autoidle_all(void)
list_for_each_entry(c, &clk_hw_omap_clocks, node)
if (c->ops && c->ops->deny_idle)
c->ops->deny_idle(c);
of_ti_clk_deny_autoidle_all();
return 0;
}
......
ifneq ($(CONFIG_OF),)
obj-y += clk.o
obj-y += clk.o autoidle.o
clk-common = dpll.o
endif
/*
* TI clock autoidle support
*
* Copyright (C) 2013 Texas Instruments, Inc.
*
* Tero Kristo <t-kristo@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
* kind, whether express or implied; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/clk-provider.h>
#include <linux/slab.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/clk/ti.h>
struct clk_ti_autoidle {
void __iomem *reg;
u8 shift;
u8 flags;
const char *name;
struct list_head node;
};
#define AUTOIDLE_LOW 0x1
static LIST_HEAD(autoidle_clks);
static void ti_allow_autoidle(struct clk_ti_autoidle *clk)
{
u32 val;
val = ti_clk_ll_ops->clk_readl(clk->reg);
if (clk->flags & AUTOIDLE_LOW)
val &= ~(1 << clk->shift);
else
val |= (1 << clk->shift);
ti_clk_ll_ops->clk_writel(val, clk->reg);
}
static void ti_deny_autoidle(struct clk_ti_autoidle *clk)
{
u32 val;
val = ti_clk_ll_ops->clk_readl(clk->reg);
if (clk->flags & AUTOIDLE_LOW)
val |= (1 << clk->shift);
else
val &= ~(1 << clk->shift);
ti_clk_ll_ops->clk_writel(val, clk->reg);
}
/**
* of_ti_clk_allow_autoidle_all - enable autoidle for all clocks
*
* Enables hardware autoidle for all registered DT clocks, which have
* the feature.
*/
void of_ti_clk_allow_autoidle_all(void)
{
struct clk_ti_autoidle *c;
list_for_each_entry(c, &autoidle_clks, node)
ti_allow_autoidle(c);
}
/**
* of_ti_clk_deny_autoidle_all - disable autoidle for all clocks
*
* Disables hardware autoidle for all registered DT clocks, which have
* the feature.
*/
void of_ti_clk_deny_autoidle_all(void)
{
struct clk_ti_autoidle *c;
list_for_each_entry(c, &autoidle_clks, node)
ti_deny_autoidle(c);
}
/**
* of_ti_clk_autoidle_setup - sets up hardware autoidle for a clock
* @node: pointer to the clock device node
*
* Checks if a clock has hardware autoidle support or not (check
* for presence of 'ti,autoidle-shift' property in the device tree
* node) and sets up the hardware autoidle feature for the clock
* if available. If autoidle is available, the clock is also added
* to the autoidle list for later processing. Returns 0 on success,
* negative error value on failure.
*/
int __init of_ti_clk_autoidle_setup(struct device_node *node)
{
u32 shift;
struct clk_ti_autoidle *clk;
/* Check if this clock has autoidle support or not */
if (of_property_read_u32(node, "ti,autoidle-shift", &shift))
return 0;
clk = kzalloc(sizeof(*clk), GFP_KERNEL);
if (!clk)
return -ENOMEM;
clk->shift = shift;
clk->name = node->name;
clk->reg = ti_clk_get_reg_addr(node, 0);
if (!clk->reg) {
kfree(clk);
return -EINVAL;
}
if (of_property_read_bool(node, "ti,invert-autoidle-bit"))
clk->flags |= AUTOIDLE_LOW;
list_add(&clk->node, &autoidle_clks);
return 0;
}
......@@ -242,6 +242,15 @@ void ti_dt_clocks_register(struct ti_dt_clk *oclks);
void ti_dt_clk_init_provider(struct device_node *np, int index);
int ti_clk_retry_init(struct device_node *node, struct clk_hw *hw,
ti_of_clk_init_cb_t func);
int of_ti_clk_autoidle_setup(struct device_node *node);
#ifdef CONFIG_OF
void of_ti_clk_allow_autoidle_all(void);
void of_ti_clk_deny_autoidle_all(void);
#else
static inline void of_ti_clk_allow_autoidle_all(void) { }
static inline void of_ti_clk_deny_autoidle_all(void) { }
#endif
extern const struct clk_hw_omap_ops clkhwops_omap3_dpll;
extern const struct clk_hw_omap_ops clkhwops_omap4_dpllmx;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment