Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6

Pull GPIO driver changes from Grant Likely:
 "Lots of gpio changes, both to core code and drivers.

  Changes do touch architecture code to remove the need for separate
  arm/gpio.h includes in most architectures.

  Some new drivers are added, and a number of gpio drivers are converted
  to use irq_domains for gpio inputs used as interrupts.  Device tree
  support has been amended to allow multiple gpio_chips to use the same
  device tree node.

  Remaining changes are primarily bug fixes."

* tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6: (33 commits)
  gpio/generic: initialize basic_mmio_gpio shadow variables properly
  gpiolib: Remove 'const' from data argument of gpiochip_find()
  gpio/rc5t583: add gpio driver for RICOH PMIC RC5T583
  gpiolib: quiet gpiochip_add boot message noise
  gpio: mpc8xxx: Prevent NULL pointer deref in demux handler
  gpio/lpc32xx: Add device tree support
  gpio: Adjust of_xlate API to support multiple GPIO chips
  gpiolib: Implement devm_gpio_request_one()
  gpio-mcp23s08: dbg_show: fix pullup configuration display
  Add support for TCA6424A
  gpio/omap: (re)fix wakeups on level-triggered GPIOs
  gpio/omap: fix broken context restore for non-OFF mode transitions
  gpio/omap: fix missing check in *_runtime_suspend()
  gpio/omap: remove cpu_is_omapxxxx() checks from *_runtime_resume()
  gpio/omap: remove suspend/resume callbacks
  gpio/omap: remove retrigger variable in gpio_irq_handler
  gpio/omap: remove saved_wakeup field from struct gpio_bank
  gpio/omap: remove suspend_wakeup field from struct gpio_bank
  gpio/omap: remove saved_fallingdetect, saved_risingdetect
  gpio/omap: remove virtual_irq_start variable
  ...

Conflicts:
	drivers/gpio/gpio-samsung.c

Documentation/devicetree/bindings/gpio/gpio_lpc32xx.txt

+NXP LPC32xx SoC GPIO controller
+
+Required properties:
+- compatible: must be "nxp,lpc3220-gpio"
+- reg: Physical base address and length of the controller's registers.
+- gpio-controller: Marks the device node as a GPIO controller.
+- #gpio-cells: Should be 3:
+   1) bank:
+      0: GPIO P0
+      1: GPIO P1
+      2: GPIO P2
+      3: GPIO P3
+      4: GPI P3
+      5: GPO P3
+   2) pin number
+   3) optional parameters:
+      - bit 0 specifies polarity (0 for normal, 1 for inverted)
+- reg: Index of the GPIO group
+
+Example:
+
+	gpio: gpio@40028000 {
+		compatible = "nxp,lpc3220-gpio";
+		reg = <0x40028000 0x1000>;
+		gpio-controller;
+		#gpio-cells = <3>; /* bank, pin, flags */
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led0 {
+			gpios = <&gpio 5 1 1>; /* GPO_P3 1, active low */
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		led1 {
+			gpios = <&gpio 5 14 1>; /* GPO_P3 14, active low */
+			linux,default-trigger = "timer";
+			default-state = "off";
+		};
+	};

Documentation/gpio.txt

@@ -322,6 +322,9 @@ where 'flags' is currently defined to specify the following properties:
 	* GPIOF_OPEN_DRAIN	- gpio pin is open drain type.
 	* GPIOF_OPEN_SOURCE	- gpio pin is open source type.
 
+	* GPIOF_EXPORT_DIR_FIXED	- export gpio to sysfs, keep direction
+	* GPIOF_EXPORT_DIR_CHANGEABLE	- also export, allow changing direction
+
 since GPIOF_INIT_* are only valid when configured as output, so group valid
 combinations as:
 

arch/alpha/include/asm/gpio.h

-/*
- * Generic GPIO API implementation for Alpha.
- *
- * A stright copy of that for PowerPC which was:
- *
- * Copyright (c) 2007-2008  MontaVista Software, Inc.
- *
- * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef _ASM_ALPHA_GPIO_H
-#define _ASM_ALPHA_GPIO_H
-
-#include <linux/errno.h>
-#include <asm-generic/gpio.h>
-
-#ifdef CONFIG_GPIOLIB
-
-/*
- * We don't (yet) implement inlined/rapid versions for on-chip gpios.
- * Just call gpiolib.
- */
-static inline int gpio_get_value(unsigned int gpio)
-{
-	return __gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned int gpio, int value)
-{
-	__gpio_set_value(gpio, value);
-}
-
-static inline int gpio_cansleep(unsigned int gpio)
-{
-	return __gpio_cansleep(gpio);
-}
-
-static inline int gpio_to_irq(unsigned int gpio)
-{
-	return __gpio_to_irq(gpio);
-}
-
-static inline int irq_to_gpio(unsigned int irq)
-{
-	return -EINVAL;
-}
-
-#endif /* CONFIG_GPIOLIB */
-
-#endif /* _ASM_ALPHA_GPIO_H */
+#ifndef __LINUX_GPIO_H
+#warning Include linux/gpio.h instead of asm/gpio.h
+#include <linux/gpio.h>
+#endif

arch/arm/Kconfig

 config ARM
 	bool
 	default y
+	select ARCH_HAVE_CUSTOM_GPIO_H
 	select HAVE_AOUT
 	select HAVE_DMA_API_DEBUG
 	select HAVE_IDE if PCI || ISA || PCMCIA

arch/arm/mach-imx/mach-mx35_3ds.c

@@ -98,8 +98,7 @@ static struct i2c_board_info __initdata i2c_devices_3ds[] = {
 
 static int lcd_power_gpio = -ENXIO;
 
-static int mc9s08dz60_gpiochip_match(struct gpio_chip *chip,
-						     const void *data)
+static int mc9s08dz60_gpiochip_match(struct gpio_chip *chip, void *data)
 {
 	return !strcmp(chip->label, data);
 }

arch/arm/mach-lpc32xx/include/mach/gpio.h

-/* empty */
+#ifndef __MACH_GPIO_H
+#define __MACH_GPIO_H
+
+#include "gpio-lpc32xx.h"
+
+#define ARCH_NR_GPIOS (LPC32XX_GPO_P3_GRP + LPC32XX_GPO_P3_MAX)
+
+#endif /* __MACH_GPIO_H */

arch/arm/mach-omap1/gpio15xx.c

@@ -46,7 +46,6 @@ static struct omap_gpio_reg_offs omap15xx_mpuio_regs = {
 };
 
 static struct __initdata omap_gpio_platform_data omap15xx_mpu_gpio_config = {
-	.virtual_irq_start	= IH_MPUIO_BASE,
 	.is_mpuio		= true,
 	.bank_width		= 16,
 	.bank_stride		= 1,
@@ -89,7 +88,6 @@ static struct omap_gpio_reg_offs omap15xx_gpio_regs = {
 };
 
 static struct __initdata omap_gpio_platform_data omap15xx_gpio_config = {
-	.virtual_irq_start	= IH_GPIO_BASE,
 	.bank_width		= 16,
 	.regs                   = &omap15xx_gpio_regs,
 };

arch/arm/mach-omap1/gpio16xx.c

@@ -52,7 +52,6 @@ static struct omap_gpio_reg_offs omap16xx_mpuio_regs = {
 };
 
 static struct __initdata omap_gpio_platform_data omap16xx_mpu_gpio_config = {
-	.virtual_irq_start	= IH_MPUIO_BASE,
 	.is_mpuio		= true,
 	.bank_width		= 16,
 	.bank_stride		= 1,
@@ -99,7 +98,6 @@ static struct omap_gpio_reg_offs omap16xx_gpio_regs = {
 };
 
 static struct __initdata omap_gpio_platform_data omap16xx_gpio1_config = {
-	.virtual_irq_start	= IH_GPIO_BASE,
 	.bank_width		= 16,
 	.regs                   = &omap16xx_gpio_regs,
 };
@@ -128,7 +126,6 @@ static struct __initdata resource omap16xx_gpio2_resources[] = {
 };
 
 static struct __initdata omap_gpio_platform_data omap16xx_gpio2_config = {
-	.virtual_irq_start	= IH_GPIO_BASE + 16,
 	.bank_width		= 16,
 	.regs                   = &omap16xx_gpio_regs,
 };
@@ -157,7 +154,6 @@ static struct __initdata resource omap16xx_gpio3_resources[] = {
 };
 
 static struct __initdata omap_gpio_platform_data omap16xx_gpio3_config = {
-	.virtual_irq_start	= IH_GPIO_BASE + 32,
 	.bank_width		= 16,
 	.regs                   = &omap16xx_gpio_regs,
 };
@@ -186,7 +182,6 @@ static struct __initdata resource omap16xx_gpio4_resources[] = {
 };
 
 static struct __initdata omap_gpio_platform_data omap16xx_gpio4_config = {
-	.virtual_irq_start	= IH_GPIO_BASE + 48,
 	.bank_width		= 16,
 	.regs                   = &omap16xx_gpio_regs,
 };

arch/arm/mach-omap1/gpio7xx.c

@@ -51,7 +51,6 @@ static struct omap_gpio_reg_offs omap7xx_mpuio_regs = {
 };
 
 static struct __initdata omap_gpio_platform_data omap7xx_mpu_gpio_config = {
-	.virtual_irq_start	= IH_MPUIO_BASE,
 	.is_mpuio		= true,
 	.bank_width		= 16,
 	.bank_stride		= 2,
@@ -93,7 +92,6 @@ static struct omap_gpio_reg_offs omap7xx_gpio_regs = {
 };
 
 static struct __initdata omap_gpio_platform_data omap7xx_gpio1_config = {
-	.virtual_irq_start	= IH_GPIO_BASE,
 	.bank_width		= 32,
 	.regs			= &omap7xx_gpio_regs,
 };
@@ -122,7 +120,6 @@ static struct __initdata resource omap7xx_gpio2_resources[] = {
 };
 
 static struct __initdata omap_gpio_platform_data omap7xx_gpio2_config = {
-	.virtual_irq_start	= IH_GPIO_BASE + 32,
 	.bank_width		= 32,
 	.regs			= &omap7xx_gpio_regs,
 };
@@ -151,7 +148,6 @@ static struct __initdata resource omap7xx_gpio3_resources[] = {
 };
 
 static struct __initdata omap_gpio_platform_data omap7xx_gpio3_config = {
-	.virtual_irq_start	= IH_GPIO_BASE + 64,
 	.bank_width		= 32,
 	.regs			= &omap7xx_gpio_regs,
 };
@@ -180,7 +176,6 @@ static struct __initdata resource omap7xx_gpio4_resources[] = {
 };
 
 static struct __initdata omap_gpio_platform_data omap7xx_gpio4_config = {
-	.virtual_irq_start	= IH_GPIO_BASE + 96,
 	.bank_width		= 32,
 	.regs			= &omap7xx_gpio_regs,
 };
@@ -209,7 +204,6 @@ static struct __initdata resource omap7xx_gpio5_resources[] = {
 };
 
 static struct __initdata omap_gpio_platform_data omap7xx_gpio5_config = {
-	.virtual_irq_start	= IH_GPIO_BASE + 128,
 	.bank_width		= 32,
 	.regs			= &omap7xx_gpio_regs,
 };
@@ -238,7 +232,6 @@ static struct __initdata resource omap7xx_gpio6_resources[] = {
 };
 
 static struct __initdata omap_gpio_platform_data omap7xx_gpio6_config = {
-	.virtual_irq_start	= IH_GPIO_BASE + 160,
 	.bank_width		= 32,
 	.regs			= &omap7xx_gpio_regs,
 };

arch/arm/mach-omap2/gpio.c

@@ -56,7 +56,6 @@ static int __init omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
 	dev_attr = (struct omap_gpio_dev_attr *)oh->dev_attr;
 	pdata->bank_width = dev_attr->bank_width;
 	pdata->dbck_flag = dev_attr->dbck_flag;
-	pdata->virtual_irq_start = IH_GPIO_BASE + 32 * (id - 1);
 	pdata->get_context_loss_count = omap_pm_get_dev_context_loss_count;
 	pdata->regs = kzalloc(sizeof(struct omap_gpio_reg_offs), GFP_KERNEL);
 	if (!pdata->regs) {
@@ -103,6 +102,8 @@ static int __init omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
 		pdata->regs->dataout = OMAP4_GPIO_DATAOUT;
 		pdata->regs->set_dataout = OMAP4_GPIO_SETDATAOUT;
 		pdata->regs->clr_dataout = OMAP4_GPIO_CLEARDATAOUT;
+		pdata->regs->irqstatus_raw0 = OMAP4_GPIO_IRQSTATUSRAW0;
+		pdata->regs->irqstatus_raw1 = OMAP4_GPIO_IRQSTATUSRAW1;
 		pdata->regs->irqstatus = OMAP4_GPIO_IRQSTATUS0;
 		pdata->regs->irqstatus2 = OMAP4_GPIO_IRQSTATUS1;
 		pdata->regs->irqenable = OMAP4_GPIO_IRQSTATUSSET0;

arch/arm/plat-omap/include/plat/gpio.h

@@ -172,6 +172,8 @@ struct omap_gpio_reg_offs {
 	u16 clr_dataout;
 	u16 irqstatus;
 	u16 irqstatus2;
+	u16 irqstatus_raw0;
+	u16 irqstatus_raw1;
 	u16 irqenable;
 	u16 irqenable2;
 	u16 set_irqenable;
@@ -193,7 +195,6 @@ struct omap_gpio_reg_offs {
 };
 
 struct omap_gpio_platform_data {
-	u16 virtual_irq_start;
 	int bank_type;
 	int bank_width;		/* GPIO bank width */
 	int bank_stride;	/* Only needed for omap1 MPUIO */

arch/avr32/Kconfig

@@ -11,6 +11,7 @@ config AVR32
 	select GENERIC_ATOMIC64
 	select HARDIRQS_SW_RESEND
 	select GENERIC_IRQ_SHOW
+	select ARCH_HAVE_CUSTOM_GPIO_H
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG
 	select GENERIC_CLOCKEVENTS
 	help

arch/blackfin/Kconfig

@@ -31,6 +31,7 @@ config BLACKFIN
 	select HAVE_KERNEL_LZO if RAMKERNEL
 	select HAVE_OPROFILE
 	select HAVE_PERF_EVENTS
+	select ARCH_HAVE_CUSTOM_GPIO_H
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select HAVE_GENERIC_HARDIRQS
 	select GENERIC_ATOMIC64

arch/ia64/include/asm/gpio.h

-/*
- * Generic GPIO API implementation for IA-64.
- *
- * A stright copy of that for PowerPC which was:
- *
- * Copyright (c) 2007-2008  MontaVista Software, Inc.
- *
- * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef _ASM_IA64_GPIO_H
-#define _ASM_IA64_GPIO_H
-
-#include <linux/errno.h>
-#include <asm-generic/gpio.h>
-
-#ifdef CONFIG_GPIOLIB
-
-/*
- * We don't (yet) implement inlined/rapid versions for on-chip gpios.
- * Just call gpiolib.
- */
-static inline int gpio_get_value(unsigned int gpio)
-{
-	return __gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned int gpio, int value)
-{
-	__gpio_set_value(gpio, value);
-}
-
-static inline int gpio_cansleep(unsigned int gpio)
-{
-	return __gpio_cansleep(gpio);
-}
-
-static inline int gpio_to_irq(unsigned int gpio)
-{
-	return __gpio_to_irq(gpio);
-}
-
-static inline int irq_to_gpio(unsigned int irq)
-{
-	return -EINVAL;
-}
-
-#endif /* CONFIG_GPIOLIB */
-
-#endif /* _ASM_IA64_GPIO_H */
+#ifndef __LINUX_GPIO_H
+#warning Include linux/gpio.h instead of asm/gpio.h
+#include <linux/gpio.h>
+#endif

arch/m68k/Kconfig.cpu

@@ -24,6 +24,7 @@ config COLDFIRE
 	bool "Coldfire CPU family support"
 	select GENERIC_GPIO
 	select ARCH_REQUIRE_GPIOLIB
+	select ARCH_HAVE_CUSTOM_GPIO_H
 	select CPU_HAS_NO_BITFIELDS
 	select CPU_HAS_NO_MULDIV64
 	select GENERIC_CSUM

arch/microblaze/include/asm/gpio.h

-/*
- * Generic GPIO API implementation for PowerPC.
- *
- * Copyright (c) 2007-2008  MontaVista Software, Inc.
- *
- * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef _ASM_MICROBLAZE_GPIO_H
-#define _ASM_MICROBLAZE_GPIO_H
-
-#include <linux/errno.h>
-#include <asm-generic/gpio.h>
-
-#ifdef CONFIG_GPIOLIB
-
-/*
- * We don't (yet) implement inlined/rapid versions for on-chip gpios.
- * Just call gpiolib.
- */
-static inline int gpio_get_value(unsigned int gpio)
-{
-	return __gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned int gpio, int value)
-{
-	__gpio_set_value(gpio, value);
-}
-
-static inline int gpio_cansleep(unsigned int gpio)
-{
-	return __gpio_cansleep(gpio);
-}
-
-static inline int gpio_to_irq(unsigned int gpio)
-{
-	return __gpio_to_irq(gpio);
-}
-
-static inline int irq_to_gpio(unsigned int irq)
-{
-	return -EINVAL;
-}
-
-#endif /* CONFIG_GPIOLIB */
-
-#endif /* _ASM_MICROBLAZE_GPIO_H */
+#ifndef __LINUX_GPIO_H
+#warning Include linux/gpio.h instead of asm/gpio.h
+#include <linux/gpio.h>
+#endif

arch/mips/Kconfig

@@ -8,6 +8,7 @@ config MIPS
 	select HAVE_PERF_EVENTS
 	select PERF_USE_VMALLOC
 	select HAVE_ARCH_KGDB
+	select ARCH_HAVE_CUSTOM_GPIO_H
 	select HAVE_FUNCTION_TRACER
 	select HAVE_FUNCTION_TRACE_MCOUNT_TEST
 	select HAVE_DYNAMIC_FTRACE

arch/openrisc/include/asm/gpio.h

-/*
- * OpenRISC Linux
- *
- * Linux architectural port borrowing liberally from similar works of
- * others.  All original copyrights apply as per the original source
- * declaration.
- *
- * OpenRISC implementation:
- * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
- * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
- * et al.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef __ASM_OPENRISC_GPIO_H
-#define __ASM_OPENRISC_GPIO_H
-
-#include <linux/errno.h>
-#include <asm-generic/gpio.h>
-
-#ifdef CONFIG_GPIOLIB
-
-/*
- * OpenRISC (or1k) does not have on-chip GPIO's so there is not really
- * any standardized implementation that makes sense here.  If passing
- * through gpiolib becomes a bottleneck then it may make sense, on a
- * case-by-case basis, to implement these inlined/rapid versions.
- *
- * Just call gpiolib.
- */
-static inline int gpio_get_value(unsigned int gpio)
-{
-	return __gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned int gpio, int value)
-{
-	__gpio_set_value(gpio, value);
-}
-
-static inline int gpio_cansleep(unsigned int gpio)
-{
-	return __gpio_cansleep(gpio);
-}
-
-/*
- * Not implemented, yet.
- */
-static inline int gpio_to_irq(unsigned int gpio)
-{
-	return -ENOSYS;
-}
-
-static inline int irq_to_gpio(unsigned int irq)
-{
-	return -EINVAL;
-}
-
-#endif /* CONFIG_GPIOLIB */
-
-#endif /* __ASM_OPENRISC_GPIO_H */
+#ifndef __LINUX_GPIO_H
+#warning Include linux/gpio.h instead of asm/gpio.h
+#include <linux/gpio.h>
+#endif

arch/powerpc/include/asm/gpio.h

-/*
- * Generic GPIO API implementation for PowerPC.
- *
- * Copyright (c) 2007-2008  MontaVista Software, Inc.
- *
- * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef __ASM_POWERPC_GPIO_H
-#define __ASM_POWERPC_GPIO_H
-
-#include <linux/errno.h>
-#include <asm-generic/gpio.h>
-
-#ifdef CONFIG_GPIOLIB
-
-/*
- * We don't (yet) implement inlined/rapid versions for on-chip gpios.
- * Just call gpiolib.
- */
-static inline int gpio_get_value(unsigned int gpio)
-{
-	return __gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned int gpio, int value)
-{
-	__gpio_set_value(gpio, value);
-}
-
-static inline int gpio_cansleep(unsigned int gpio)
-{
-	return __gpio_cansleep(gpio);
-}
-
-static inline int gpio_to_irq(unsigned int gpio)
-{
-	return __gpio_to_irq(gpio);
-}
-
-static inline int irq_to_gpio(unsigned int irq)
-{
-	return -EINVAL;
-}
-
-#endif /* CONFIG_GPIOLIB */
-
-#endif /* __ASM_POWERPC_GPIO_H */
+#ifndef __LINUX_GPIO_H
+#warning Include linux/gpio.h instead of asm/gpio.h
+#include <linux/gpio.h>
+#endif

arch/sh/Kconfig

@@ -13,6 +13,7 @@ config SUPERH
 	select HAVE_DMA_ATTRS
 	select HAVE_IRQ_WORK
 	select HAVE_PERF_EVENTS
+	select ARCH_HAVE_CUSTOM_GPIO_H
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG if (GUSA_RB || CPU_SH4A)
 	select PERF_USE_VMALLOC
 	select HAVE_KERNEL_GZIP

arch/sparc/include/asm/gpio.h

-#ifndef __ASM_SPARC_GPIO_H
-#define __ASM_SPARC_GPIO_H
-
-#include <linux/errno.h>
-#include <asm-generic/gpio.h>
-
-#ifdef CONFIG_GPIOLIB
-
-static inline int gpio_get_value(unsigned int gpio)
-{
-	return __gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned int gpio, int value)
-{
-	__gpio_set_value(gpio, value);
-}
-
-static inline int gpio_cansleep(unsigned int gpio)
-{
-	return __gpio_cansleep(gpio);
-}
-
-static inline int gpio_to_irq(unsigned int gpio)
-{
-	return -ENOSYS;
-}
-
-static inline int irq_to_gpio(unsigned int irq)
-{
-	return -EINVAL;
-}
-
-#endif /* CONFIG_GPIOLIB */
-
-#endif /* __ASM_SPARC_GPIO_H */
+#ifndef __LINUX_GPIO_H
+#warning Include linux/gpio.h instead of asm/gpio.h
+#include <linux/gpio.h>
+#endif

arch/unicore32/Kconfig

@@ -8,6 +8,7 @@ config UNICORE32
 	select HAVE_KERNEL_BZIP2
 	select HAVE_KERNEL_LZO
 	select HAVE_KERNEL_LZMA
+	select ARCH_HAVE_CUSTOM_GPIO_H
 	select GENERIC_FIND_FIRST_BIT
 	select GENERIC_IRQ_PROBE
 	select GENERIC_IRQ_SHOW

arch/x86/include/asm/gpio.h

-/*
- * Generic GPIO API implementation for x86.
- *
- * Derived from the generic GPIO API for powerpc:
- *
- * Copyright (c) 2007-2008  MontaVista Software, Inc.
- *
- * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef _ASM_X86_GPIO_H
-#define _ASM_X86_GPIO_H
-
-#include <asm-generic/gpio.h>
-
-#ifdef CONFIG_GPIOLIB
-
-/*
- * Just call gpiolib.
- */
-static inline int gpio_get_value(unsigned int gpio)
-{
-	return __gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned int gpio, int value)
-{
-	__gpio_set_value(gpio, value);
-}
-
-static inline int gpio_cansleep(unsigned int gpio)
-{
-	return __gpio_cansleep(gpio);
-}
-
-static inline int gpio_to_irq(unsigned int gpio)
-{
-	return __gpio_to_irq(gpio);
-}
-
-static inline int irq_to_gpio(unsigned int irq)
-{
-	return -EINVAL;
-}
-
-#endif /* CONFIG_GPIOLIB */
-
-#endif /* _ASM_X86_GPIO_H */
+#ifndef __LINUX_GPIO_H
+#warning Include linux/gpio.h instead of asm/gpio.h
+#include <linux/gpio.h>
+#endif

arch/xtensa/include/asm/gpio.h

-/*
- * Generic GPIO API implementation for xtensa.
- *
- * Stolen from x86, which is derived from the generic GPIO API for powerpc:
- *
- * Copyright (c) 2007-2008  MontaVista Software, Inc.
- *
- * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef _ASM_XTENSA_GPIO_H
-#define _ASM_XTENSA_GPIO_H
-
-#include <asm-generic/gpio.h>
-
-#ifdef CONFIG_GPIOLIB
-
-/*
- * Just call gpiolib.
- */
-static inline int gpio_get_value(unsigned int gpio)
-{
-	return __gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned int gpio, int value)
-{
-	__gpio_set_value(gpio, value);
-}
-
-static inline int gpio_cansleep(unsigned int gpio)
-{
-	return __gpio_cansleep(gpio);
-}
-
-static inline int gpio_to_irq(unsigned int gpio)
-{
-	return __gpio_to_irq(gpio);
-}
-
-/*
- * Not implemented, yet.
- */
-static inline int irq_to_gpio(unsigned int irq)
-{
-	return -EINVAL;
-}
-
-#endif /* CONFIG_GPIOLIB */
-
-#endif /* _ASM_XTENSA_GPIO_H */
+#ifndef __LINUX_GPIO_H
+#warning Include linux/gpio.h instead of asm/gpio.h
+#include <linux/gpio.h>
+#endif

drivers/gpio/Kconfig

@@ -2,6 +2,14 @@
 # GPIO infrastructure and drivers
 #
 
+config ARCH_HAVE_CUSTOM_GPIO_H
+	bool
+	help
+	  Selecting this config option from the architecture Kconfig allows
+	  the architecture to provide a custom asm/gpio.h implementation
+	  overriding the default implementations.  New uses of this are
+	  strongly discouraged.
+
 config ARCH_WANT_OPTIONAL_GPIOLIB
 	bool
 	help
@@ -37,6 +45,10 @@ menuconfig GPIOLIB
 
 if GPIOLIB
 
+config OF_GPIO
+	def_bool y
+	depends on OF && !SPARC
+
 config DEBUG_GPIO
 	bool "Debug GPIO calls"
 	depends on DEBUG_KERNEL
@@ -249,7 +261,7 @@ config GPIO_MC9S08DZ60
 	  Select this to enable the MC9S08DZ60 GPIO driver
 
 config GPIO_PCA953X
-	tristate "PCA953x, PCA955x, TCA64xx, and MAX7310 I/O ports"
+	tristate "PCA953x, PCA955x, PCA957x, TCA64xx, and MAX7310 I/O ports"
 	depends on I2C
 	help
 	  Say yes here to provide access to several register-oriented
@@ -258,10 +270,11 @@ config GPIO_PCA953X
 
 	  4 bits:	pca9536, pca9537
 
-	  8 bits:	max7310, pca9534, pca9538, pca9554, pca9557,
-	  		tca6408
+	  8 bits:	max7310, max7315, pca6107, pca9534, pca9538, pca9554,
+			pca9556, pca9557, pca9574, tca6408
 
-	  16 bits:	pca9535, pca9539, pca9555, tca6416
+	  16 bits:	max7312, max7313, pca9535, pca9539, pca9555, pca9575,
+			tca6416
 
 config GPIO_PCA953X_IRQ
 	bool "Interrupt controller support for PCA953x"
@@ -294,6 +307,15 @@ config GPIO_PCF857X
 	  This driver provides an in-kernel interface to those GPIOs using
 	  platform-neutral GPIO calls.
 
+config GPIO_RC5T583
+	bool "RICOH RC5T583 GPIO"
+	depends on MFD_RC5T583
+	help
+	  Select this option to enable GPIO driver for the Ricoh RC5T583
+	  chip family.
+	  This driver provides the support for driving/reading the gpio pins
+	  of RC5T583 device through standard gpio library.
+
 config GPIO_SX150X
 	bool "Semtech SX150x I2C GPIO expander"
 	depends on I2C=y
@@ -405,6 +427,7 @@ config GPIO_BT8XX
 config GPIO_LANGWELL
 	bool "Intel Langwell/Penwell GPIO support"
 	depends on PCI && X86
+	select IRQ_DOMAIN
 	help
 	  Say Y here to support Intel Langwell/Penwell GPIO.
 
@@ -520,4 +543,12 @@ config GPIO_TPS65910
 	help
 	  Select this option to enable GPIO driver for the TPS65910
 	  chip family.
+
+config GPIO_MSIC
+	bool "Intel MSIC mixed signal gpio support"
+	depends on MFD_INTEL_MSIC
+	help
+	  Enable support for GPIO on intel MSIC controllers found in
+	  intel MID devices
+
 endif

drivers/gpio/Makefile

@@ -3,6 +3,7 @@
 ccflags-$(CONFIG_DEBUG_GPIO)	+= -DDEBUG
 
 obj-$(CONFIG_GPIOLIB)		+= gpiolib.o devres.o
+obj-$(CONFIG_OF_GPIO)		+= gpiolib-of.o
 
 # Device drivers. Generally keep list sorted alphabetically
 obj-$(CONFIG_GPIO_GENERIC)	+= gpio-generic.o
@@ -33,6 +34,7 @@ obj-$(CONFIG_GPIO_MCP23S08)	+= gpio-mcp23s08.o
 obj-$(CONFIG_GPIO_ML_IOH)	+= gpio-ml-ioh.o
 obj-$(CONFIG_GPIO_MPC5200)	+= gpio-mpc5200.o
 obj-$(CONFIG_GPIO_MPC8XXX)	+= gpio-mpc8xxx.o
+obj-$(CONFIG_GPIO_MSIC)		+= gpio-msic.o
 obj-$(CONFIG_GPIO_MSM_V1)	+= gpio-msm-v1.o
 obj-$(CONFIG_GPIO_MSM_V2)	+= gpio-msm-v2.o
 obj-$(CONFIG_GPIO_MXC)		+= gpio-mxc.o
@@ -43,6 +45,7 @@ obj-$(CONFIG_GPIO_PCF857X)	+= gpio-pcf857x.o
 obj-$(CONFIG_GPIO_PCH)		+= gpio-pch.o
 obj-$(CONFIG_GPIO_PL061)	+= gpio-pl061.o
 obj-$(CONFIG_GPIO_PXA)		+= gpio-pxa.o
+obj-$(CONFIG_GPIO_RC5T583)	+= gpio-rc5t583.o
 obj-$(CONFIG_GPIO_RDC321X)	+= gpio-rdc321x.o
 obj-$(CONFIG_PLAT_SAMSUNG)	+= gpio-samsung.o
 obj-$(CONFIG_ARCH_SA1100)	+= gpio-sa1100.o

drivers/gpio/devres.c

@@ -70,6 +70,35 @@ int devm_gpio_request(struct device *dev, unsigned gpio, const char *label)
 }
 EXPORT_SYMBOL(devm_gpio_request);
 
+/**
+ *	devm_gpio_request_one - request a single GPIO with initial setup
+ *	@dev:   device to request for
+ *	@gpio:	the GPIO number
+ *	@flags:	GPIO configuration as specified by GPIOF_*
+ *	@label:	a literal description string of this GPIO
+ */
+int devm_gpio_request_one(struct device *dev, unsigned gpio,
+			  unsigned long flags, const char *label)
+{
+	unsigned *dr;
+	int rc;
+
+	dr = devres_alloc(devm_gpio_release, sizeof(unsigned), GFP_KERNEL);
+	if (!dr)
+		return -ENOMEM;
+
+	rc = gpio_request_one(gpio, flags, label);
+	if (rc) {
+		devres_free(dr);
+		return rc;
+	}
+
+	*dr = gpio;
+	devres_add(dev, dr);
+
+	return 0;
+}
+
 /**
  *      devm_gpio_free - free an interrupt
  *      @dev: device to free gpio for

drivers/gpio/gpio-bt8xx.c

@@ -328,17 +328,7 @@ static struct pci_driver bt8xxgpio_pci_driver = {
 	.resume		= bt8xxgpio_resume,
 };
 
-static int __init bt8xxgpio_init(void)
-{
-	return pci_register_driver(&bt8xxgpio_pci_driver);
-}
-module_init(bt8xxgpio_init)
-
-static void __exit bt8xxgpio_exit(void)
-{
-	pci_unregister_driver(&bt8xxgpio_pci_driver);
-}
-module_exit(bt8xxgpio_exit)
+module_pci_driver(bt8xxgpio_pci_driver);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Michael Buesch");

drivers/gpio/gpio-ep93xx.c

@@ -325,7 +325,7 @@ static int ep93xx_gpio_add_bank(struct bgpio_chip *bgc, struct device *dev,
 	void __iomem *dir =  mmio_base + bank->dir;
 	int err;
 
-	err = bgpio_init(bgc, dev, 1, data, NULL, NULL, dir, NULL, false);
+	err = bgpio_init(bgc, dev, 1, data, NULL, NULL, dir, NULL, 0);
 	if (err)
 		return err;
 

drivers/gpio/gpio-generic.c

@@ -364,7 +364,7 @@ EXPORT_SYMBOL_GPL(bgpio_remove);
 int bgpio_init(struct bgpio_chip *bgc, struct device *dev,
 	       unsigned long sz, void __iomem *dat, void __iomem *set,
 	       void __iomem *clr, void __iomem *dirout, void __iomem *dirin,
-	       bool big_endian)
+	       unsigned long flags)
 {
 	int ret;
 
@@ -385,7 +385,7 @@ int bgpio_init(struct bgpio_chip *bgc, struct device *dev,
 	if (ret)
 		return ret;
 
-	ret = bgpio_setup_accessors(dev, bgc, big_endian);
+	ret = bgpio_setup_accessors(dev, bgc, flags & BGPIOF_BIG_ENDIAN);
 	if (ret)
 		return ret;
 
@@ -394,6 +394,11 @@ int bgpio_init(struct bgpio_chip *bgc, struct device *dev,
 		return ret;
 
 	bgc->data = bgc->read_reg(bgc->reg_dat);
+	if (bgc->gc.set == bgpio_set_set &&
+			!(flags & BGPIOF_UNREADABLE_REG_SET))
+		bgc->data = bgc->read_reg(bgc->reg_set);
+	if (bgc->reg_dir && !(flags & BGPIOF_UNREADABLE_REG_DIR))
+		bgc->dir = bgc->read_reg(bgc->reg_dir);
 
 	return ret;
 }
@@ -449,7 +454,7 @@ static int __devinit bgpio_pdev_probe(struct platform_device *pdev)
 	void __iomem *dirout;
 	void __iomem *dirin;
 	unsigned long sz;
-	bool be;
+	unsigned long flags = 0;
 	int err;
 	struct bgpio_chip *bgc;
 	struct bgpio_pdata *pdata = dev_get_platdata(dev);
@@ -480,13 +485,14 @@ static int __devinit bgpio_pdev_probe(struct platform_device *pdev)
 	if (err)
 		return err;
 
-	be = !strcmp(platform_get_device_id(pdev)->name, "basic-mmio-gpio-be");
+	if (!strcmp(platform_get_device_id(pdev)->name, "basic-mmio-gpio-be"))
+		flags |= BGPIOF_BIG_ENDIAN;
 
 	bgc = devm_kzalloc(&pdev->dev, sizeof(*bgc), GFP_KERNEL);
 	if (!bgc)
 		return -ENOMEM;
 
-	err = bgpio_init(bgc, dev, sz, dat, set, clr, dirout, dirin, be);
+	err = bgpio_init(bgc, dev, sz, dat, set, clr, dirout, dirin, flags);
 	if (err)
 		return err;
 

drivers/gpio/gpio-langwell.c

@@ -36,6 +36,7 @@
 #include <linux/gpio.h>
 #include <linux/slab.h>
 #include <linux/pm_runtime.h>
+#include <linux/irqdomain.h>
 
 /*
  * Langwell chip has 64 pins and thus there are 2 32bit registers to control
@@ -66,8 +67,8 @@ struct lnw_gpio {
 	struct gpio_chip		chip;
 	void				*reg_base;
 	spinlock_t			lock;
-	unsigned			irq_base;
 	struct pci_dev			*pdev;
+	struct irq_domain		*domain;
 };
 
 static void __iomem *gpio_reg(struct gpio_chip *chip, unsigned offset,
@@ -176,13 +177,13 @@ static int lnw_gpio_direction_output(struct gpio_chip *chip,
 static int lnw_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
 {
 	struct lnw_gpio *lnw = container_of(chip, struct lnw_gpio, chip);
-	return lnw->irq_base + offset;
+	return irq_create_mapping(lnw->domain, offset);
 }
 
 static int lnw_irq_type(struct irq_data *d, unsigned type)
 {
 	struct lnw_gpio *lnw = irq_data_get_irq_chip_data(d);
-	u32 gpio = d->irq - lnw->irq_base;
+	u32 gpio = irqd_to_hwirq(d);
 	unsigned long flags;
 	u32 value;
 	void __iomem *grer = gpio_reg(&lnw->chip, gpio, GRER);
@@ -249,20 +250,55 @@ static void lnw_irq_handler(unsigned irq, struct irq_desc *desc)
 	/* check GPIO controller to check which pin triggered the interrupt */
 	for (base = 0; base < lnw->chip.ngpio; base += 32) {
 		gedr = gpio_reg(&lnw->chip, base, GEDR);
-		pending = readl(gedr);
-		while (pending) {
+		while ((pending = readl(gedr))) {
 			gpio = __ffs(pending);
 			mask = BIT(gpio);
-			pending &= ~mask;
 			/* Clear before handling so we can't lose an edge */
 			writel(mask, gedr);
-			generic_handle_irq(lnw->irq_base + base + gpio);
+			generic_handle_irq(irq_find_mapping(lnw->domain,
+							    base + gpio));
 		}
 	}
 
 	chip->irq_eoi(data);
 }
 
+static void lnw_irq_init_hw(struct lnw_gpio *lnw)
+{
+	void __iomem *reg;
+	unsigned base;
+
+	for (base = 0; base < lnw->chip.ngpio; base += 32) {
+		/* Clear the rising-edge detect register */
+		reg = gpio_reg(&lnw->chip, base, GRER);
+		writel(0, reg);
+		/* Clear the falling-edge detect register */
+		reg = gpio_reg(&lnw->chip, base, GFER);
+		writel(0, reg);
+		/* Clear the edge detect status register */
+		reg = gpio_reg(&lnw->chip, base, GEDR);
+		writel(~0, reg);
+	}
+}
+
+static int lnw_gpio_irq_map(struct irq_domain *d, unsigned int virq,
+			    irq_hw_number_t hw)
+{
+	struct lnw_gpio *lnw = d->host_data;
+
+	irq_set_chip_and_handler_name(virq, &lnw_irqchip, handle_simple_irq,
+				      "demux");
+	irq_set_chip_data(virq, lnw);
+	irq_set_irq_type(virq, IRQ_TYPE_NONE);
+
+	return 0;
+}
+
+static const struct irq_domain_ops lnw_gpio_irq_ops = {
+	.map = lnw_gpio_irq_map,
+	.xlate = irq_domain_xlate_twocell,
+};
+
 #ifdef CONFIG_PM
 static int lnw_gpio_runtime_resume(struct device *dev)
 {
@@ -300,23 +336,22 @@ static int __devinit lnw_gpio_probe(struct pci_dev *pdev,
 			const struct pci_device_id *id)
 {
 	void *base;
-	int i;
 	resource_size_t start, len;
 	struct lnw_gpio *lnw;
-	u32 irq_base;
 	u32 gpio_base;
 	int retval = 0;
+	int ngpio = id->driver_data;
 
 	retval = pci_enable_device(pdev);
 	if (retval)
-		goto done;
+		return retval;
 
 	retval = pci_request_regions(pdev, "langwell_gpio");
 	if (retval) {
 		dev_err(&pdev->dev, "error requesting resources\n");
 		goto err2;
 	}
-	/* get the irq_base from bar1 */
+	/* get the gpio_base from bar1 */
 	start = pci_resource_start(pdev, 1);
 	len = pci_resource_len(pdev, 1);
 	base = ioremap_nocache(start, len);
@@ -324,28 +359,32 @@ static int __devinit lnw_gpio_probe(struct pci_dev *pdev,
 		dev_err(&pdev->dev, "error mapping bar1\n");
 		goto err3;
 	}
-	irq_base = *(u32 *)base;
 	gpio_base = *((u32 *)base + 1);
 	/* release the IO mapping, since we already get the info from bar1 */
 	iounmap(base);
 	/* get the register base from bar0 */
 	start = pci_resource_start(pdev, 0);
 	len = pci_resource_len(pdev, 0);
-	base = ioremap_nocache(start, len);
+	base = devm_ioremap_nocache(&pdev->dev, start, len);
 	if (!base) {
 		dev_err(&pdev->dev, "error mapping bar0\n");
 		retval = -EFAULT;
 		goto err3;
 	}
 
-	lnw = kzalloc(sizeof(struct lnw_gpio), GFP_KERNEL);
+	lnw = devm_kzalloc(&pdev->dev, sizeof(struct lnw_gpio), GFP_KERNEL);
 	if (!lnw) {
 		dev_err(&pdev->dev, "can't allocate langwell_gpio chip data\n");
 		retval = -ENOMEM;
-		goto err4;
+		goto err3;
 	}
+
+	lnw->domain = irq_domain_add_linear(pdev->dev.of_node, ngpio,
+					    &lnw_gpio_irq_ops, lnw);
+	if (!lnw->domain)
+		goto err3;
+
 	lnw->reg_base = base;
-	lnw->irq_base = irq_base;
 	lnw->chip.label = dev_name(&pdev->dev);
 	lnw->chip.request = lnw_gpio_request;
 	lnw->chip.direction_input = lnw_gpio_direction_input;
@@ -354,38 +393,32 @@ static int __devinit lnw_gpio_probe(struct pci_dev *pdev,
 	lnw->chip.set = lnw_gpio_set;
 	lnw->chip.to_irq = lnw_gpio_to_irq;
 	lnw->chip.base = gpio_base;
-	lnw->chip.ngpio = id->driver_data;
+	lnw->chip.ngpio = ngpio;
 	lnw->chip.can_sleep = 0;
 	lnw->pdev = pdev;
 	pci_set_drvdata(pdev, lnw);
 	retval = gpiochip_add(&lnw->chip);
 	if (retval) {
 		dev_err(&pdev->dev, "langwell gpiochip_add error %d\n", retval);
-		goto err5;
+		goto err3;
 	}
+
+	lnw_irq_init_hw(lnw);
+
 	irq_set_handler_data(pdev->irq, lnw);
 	irq_set_chained_handler(pdev->irq, lnw_irq_handler);
-	for (i = 0; i < lnw->chip.ngpio; i++) {
-		irq_set_chip_and_handler_name(i + lnw->irq_base, &lnw_irqchip,
-					      handle_simple_irq, "demux");
-		irq_set_chip_data(i + lnw->irq_base, lnw);
-	}
 
 	spin_lock_init(&lnw->lock);
 
 	pm_runtime_put_noidle(&pdev->dev);
 	pm_runtime_allow(&pdev->dev);
 
-	goto done;
-err5:
-	kfree(lnw);
-err4:
-	iounmap(base);
+	return 0;
+
 err3:
 	pci_release_regions(pdev);
 err2:
 	pci_disable_device(pdev);
-done:
 	return retval;
 }
 

drivers/gpio/gpio-lpc32xx.c

@@ -21,6 +21,9 @@
 #include <linux/io.h>
 #include <linux/errno.h>
 #include <linux/gpio.h>
+#include <linux/of_gpio.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
 
 #include <mach/hardware.h>
 #include <mach/platform.h>
@@ -454,10 +457,57 @@ static struct lpc32xx_gpio_chip lpc32xx_gpiochip[] = {
 	},
 };
 
+/* Empty now, can be removed later when mach-lpc32xx is finally switched over
+ * to DT support
+ */
 void __init lpc32xx_gpio_init(void)
+{
+}
+
+static int lpc32xx_of_xlate(struct gpio_chip *gc,
+			    const struct of_phandle_args *gpiospec, u32 *flags)
+{
+	/* Is this the correct bank? */
+	u32 bank = gpiospec->args[0];
+	if ((bank > ARRAY_SIZE(lpc32xx_gpiochip) ||
+	    (gc != &lpc32xx_gpiochip[bank].chip)))
+		return -EINVAL;
+
+	if (flags)
+		*flags = gpiospec->args[2];
+	return gpiospec->args[1];
+}
+
+static int __devinit lpc32xx_gpio_probe(struct platform_device *pdev)
 {
 	int i;
 
-	for (i = 0; i < ARRAY_SIZE(lpc32xx_gpiochip); i++)
+	for (i = 0; i < ARRAY_SIZE(lpc32xx_gpiochip); i++) {
+		if (pdev->dev.of_node) {
+			lpc32xx_gpiochip[i].chip.of_xlate = lpc32xx_of_xlate;
+			lpc32xx_gpiochip[i].chip.of_gpio_n_cells = 3;
+			lpc32xx_gpiochip[i].chip.of_node = pdev->dev.of_node;
+		}
 		gpiochip_add(&lpc32xx_gpiochip[i].chip);
+	}
+
+	return 0;
 }
+
+#ifdef CONFIG_OF
+static struct of_device_id lpc32xx_gpio_of_match[] __devinitdata = {
+	{ .compatible = "nxp,lpc3220-gpio", },
+	{ },
+};
+#endif
+
+static struct platform_driver lpc32xx_gpio_driver = {
+	.driver		= {
+		.name	= "lpc32xx-gpio",
+		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(lpc32xx_gpio_of_match),
+	},
+	.probe		= lpc32xx_gpio_probe,
+};
+
+module_platform_driver(lpc32xx_gpio_driver);

drivers/gpio/gpio-mcp23s08.c

@@ -353,7 +353,7 @@ static void mcp23s08_dbg_show(struct seq_file *s, struct gpio_chip *chip)
 			chip->base + t, bank, t, label,
 			(mcp->cache[MCP_IODIR] & mask) ? "in " : "out",
 			(mcp->cache[MCP_GPIO] & mask) ? "hi" : "lo",
-			(mcp->cache[MCP_GPPU] & mask) ? "  " : "up");
+			(mcp->cache[MCP_GPPU] & mask) ? "up" : "  ");
 		/* NOTE:  ignoring the irq-related registers */
 		seq_printf(s, "\n");
 	}

drivers/gpio/gpio-ml-ioh.c

@@ -611,17 +611,7 @@ static struct pci_driver ioh_gpio_driver = {
 	.resume = ioh_gpio_resume
 };
 
-static int __init ioh_gpio_pci_init(void)
-{
-	return pci_register_driver(&ioh_gpio_driver);
-}
-module_init(ioh_gpio_pci_init);
-
-static void __exit ioh_gpio_pci_exit(void)
-{
-	pci_unregister_driver(&ioh_gpio_driver);
-}
-module_exit(ioh_gpio_pci_exit);
+module_pci_driver(ioh_gpio_driver);
 
 MODULE_DESCRIPTION("OKI SEMICONDUCTOR ML-IOH series GPIO Driver");
 MODULE_LICENSE("GPL");

drivers/gpio/gpio-mpc8xxx.c

@@ -163,7 +163,8 @@ static void mpc8xxx_gpio_irq_cascade(unsigned int irq, struct irq_desc *desc)
 	if (mask)
 		generic_handle_irq(irq_linear_revmap(mpc8xxx_gc->irq,
 						     32 - ffs(mask)));
-	chip->irq_eoi(&desc->irq_data);
+	if (chip->irq_eoi)
+		chip->irq_eoi(&desc->irq_data);
 }
 
 static void mpc8xxx_irq_unmask(struct irq_data *d)

drivers/gpio/gpio-msic.c

+/*
+ * Intel Medfield MSIC GPIO driver>
+ * Copyright (c) 2011, Intel Corporation.
+ *
+ * Author: Mathias Nyman <mathias.nyman@linux.intel.com>
+ * Based on intel_pmic_gpio.c
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/intel_msic.h>
+
+/* the offset for the mapping of global gpio pin to irq */
+#define MSIC_GPIO_IRQ_OFFSET	0x100
+
+#define MSIC_GPIO_DIR_IN	0
+#define MSIC_GPIO_DIR_OUT	BIT(5)
+#define MSIC_GPIO_TRIG_FALL	BIT(1)
+#define MSIC_GPIO_TRIG_RISE	BIT(2)
+
+/* masks for msic gpio output GPIOxxxxCTLO registers */
+#define MSIC_GPIO_DIR_MASK	BIT(5)
+#define MSIC_GPIO_DRV_MASK	BIT(4)
+#define MSIC_GPIO_REN_MASK	BIT(3)
+#define MSIC_GPIO_RVAL_MASK	(BIT(2) | BIT(1))
+#define MSIC_GPIO_DOUT_MASK	BIT(0)
+
+/* masks for msic gpio input GPIOxxxxCTLI registers */
+#define MSIC_GPIO_GLBYP_MASK	BIT(5)
+#define MSIC_GPIO_DBNC_MASK	(BIT(4) | BIT(3))
+#define MSIC_GPIO_INTCNT_MASK	(BIT(2) | BIT(1))
+#define MSIC_GPIO_DIN_MASK	BIT(0)
+
+#define MSIC_NUM_GPIO		24
+
+struct msic_gpio {
+	struct platform_device	*pdev;
+	struct mutex		buslock;
+	struct gpio_chip	chip;
+	int			irq;
+	unsigned		irq_base;
+	unsigned long		trig_change_mask;
+	unsigned		trig_type;
+};
+
+/*
+ * MSIC has 24 gpios, 16 low voltage (1.2-1.8v) and 8 high voltage (3v).
+ * Both the high and low voltage gpios are divided in two banks.
+ * GPIOs are numbered with GPIO0LV0 as gpio_base in the following order:
+ * GPIO0LV0..GPIO0LV7: low voltage, bank 0, gpio_base
+ * GPIO1LV0..GPIO1LV7: low voltage, bank 1,  gpio_base + 8
+ * GPIO0HV0..GPIO0HV3: high voltage, bank 0, gpio_base + 16
+ * GPIO1HV0..GPIO1HV3: high voltage, bank 1, gpio_base + 20
+ */
+
+static int msic_gpio_to_ireg(unsigned offset)
+{
+	if (offset >= MSIC_NUM_GPIO)
+		return -EINVAL;
+
+	if (offset < 8)
+		return INTEL_MSIC_GPIO0LV0CTLI - offset;
+	if (offset < 16)
+		return INTEL_MSIC_GPIO1LV0CTLI - offset + 8;
+	if (offset < 20)
+		return INTEL_MSIC_GPIO0HV0CTLI - offset + 16;
+
+	return INTEL_MSIC_GPIO1HV0CTLI - offset + 20;
+}
+
+static int msic_gpio_to_oreg(unsigned offset)
+{
+	if (offset >= MSIC_NUM_GPIO)
+		return -EINVAL;
+
+	if (offset < 8)
+		return INTEL_MSIC_GPIO0LV0CTLO - offset;
+	if (offset < 16)
+		return INTEL_MSIC_GPIO1LV0CTLO - offset + 8;
+	if (offset < 20)
+		return INTEL_MSIC_GPIO0HV0CTLO - offset + 16;
+
+	return INTEL_MSIC_GPIO1HV0CTLO + offset + 20;
+}
+
+static int msic_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+	int reg;
+
+	reg = msic_gpio_to_oreg(offset);
+	if (reg < 0)
+		return reg;
+
+	return intel_msic_reg_update(reg, MSIC_GPIO_DIR_IN, MSIC_GPIO_DIR_MASK);
+}
+
+static int msic_gpio_direction_output(struct gpio_chip *chip,
+			unsigned offset, int value)
+{
+	int reg;
+	unsigned mask;
+
+	value = (!!value) | MSIC_GPIO_DIR_OUT;
+	mask = MSIC_GPIO_DIR_MASK | MSIC_GPIO_DOUT_MASK;
+
+	reg = msic_gpio_to_oreg(offset);
+	if (reg < 0)
+		return reg;
+
+	return intel_msic_reg_update(reg, value, mask);
+}
+
+static int msic_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	u8 r;
+	int ret;
+	int reg;
+
+	reg = msic_gpio_to_ireg(offset);
+	if (reg < 0)
+		return reg;
+
+	ret = intel_msic_reg_read(reg, &r);
+	if (ret < 0)
+		return ret;
+
+	return r & MSIC_GPIO_DIN_MASK;
+}
+
+static void msic_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	int reg;
+
+	reg = msic_gpio_to_oreg(offset);
+	if (reg < 0)
+		return;
+
+	intel_msic_reg_update(reg, !!value , MSIC_GPIO_DOUT_MASK);
+}
+
+/*
+ * This is called from genirq with mg->buslock locked and
+ * irq_desc->lock held. We can not access the scu bus here, so we
+ * store the change and update in the bus_sync_unlock() function below
+ */
+static int msic_irq_type(struct irq_data *data, unsigned type)
+{
+	struct msic_gpio *mg = irq_data_get_irq_chip_data(data);
+	u32 gpio = data->irq - mg->irq_base;
+
+	if (gpio >= mg->chip.ngpio)
+		return -EINVAL;
+
+	/* mark for which gpio the trigger changed, protected by buslock */
+	mg->trig_change_mask |= (1 << gpio);
+	mg->trig_type = type;
+
+	return 0;
+}
+
+static int msic_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+	struct msic_gpio *mg = container_of(chip, struct msic_gpio, chip);
+	return mg->irq_base + offset;
+}
+
+static void msic_bus_lock(struct irq_data *data)
+{
+	struct msic_gpio *mg = irq_data_get_irq_chip_data(data);
+	mutex_lock(&mg->buslock);
+}
+
+static void msic_bus_sync_unlock(struct irq_data *data)
+{
+	struct msic_gpio *mg = irq_data_get_irq_chip_data(data);
+	int offset;
+	int reg;
+	u8 trig = 0;
+
+	/* We can only get one change at a time as the buslock covers the
+	   entire transaction. The irq_desc->lock is dropped before we are
+	   called but that is fine */
+	if (mg->trig_change_mask) {
+		offset = __ffs(mg->trig_change_mask);
+
+		reg = msic_gpio_to_ireg(offset);
+		if (reg < 0)
+			goto out;
+
+		if (mg->trig_type & IRQ_TYPE_EDGE_RISING)
+			trig |= MSIC_GPIO_TRIG_RISE;
+		if (mg->trig_type & IRQ_TYPE_EDGE_FALLING)
+			trig |= MSIC_GPIO_TRIG_FALL;
+
+		intel_msic_reg_update(reg, trig, MSIC_GPIO_INTCNT_MASK);
+		mg->trig_change_mask = 0;
+	}
+out:
+	mutex_unlock(&mg->buslock);
+}
+
+/* Firmware does all the masking and unmasking for us, no masking here. */
+static void msic_irq_unmask(struct irq_data *data) { }
+
+static void msic_irq_mask(struct irq_data *data) { }
+
+static struct irq_chip msic_irqchip = {
+	.name			= "MSIC-GPIO",
+	.irq_mask		= msic_irq_mask,
+	.irq_unmask		= msic_irq_unmask,
+	.irq_set_type		= msic_irq_type,
+	.irq_bus_lock		= msic_bus_lock,
+	.irq_bus_sync_unlock	= msic_bus_sync_unlock,
+};
+
+static void msic_gpio_irq_handler(unsigned irq, struct irq_desc *desc)
+{
+	struct irq_data *data = irq_desc_get_irq_data(desc);
+	struct msic_gpio *mg = irq_data_get_irq_handler_data(data);
+	struct irq_chip *chip = irq_data_get_irq_chip(data);
+	struct intel_msic *msic = pdev_to_intel_msic(mg->pdev);
+	int i;
+	int bitnr;
+	u8 pin;
+	unsigned long pending = 0;
+
+	for (i = 0; i < (mg->chip.ngpio / BITS_PER_BYTE); i++) {
+		intel_msic_irq_read(msic, INTEL_MSIC_GPIO0LVIRQ + i, &pin);
+		pending = pin;
+
+		if (pending) {
+			for_each_set_bit(bitnr, &pending, BITS_PER_BYTE)
+				generic_handle_irq(mg->irq_base +
+						   (i * BITS_PER_BYTE) + bitnr);
+		}
+	}
+	chip->irq_eoi(data);
+}
+
+static int __devinit platform_msic_gpio_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct intel_msic_gpio_pdata *pdata = dev->platform_data;
+	struct msic_gpio *mg;
+	int irq = platform_get_irq(pdev, 0);
+	int retval;
+	int i;
+
+	if (irq < 0) {
+		dev_err(dev, "no IRQ line\n");
+		return -EINVAL;
+	}
+
+	if (!pdata || !pdata->gpio_base) {
+		dev_err(dev, "incorrect or missing platform data\n");
+		return -EINVAL;
+	}
+
+	mg = kzalloc(sizeof(*mg), GFP_KERNEL);
+	if (!mg)
+		return -ENOMEM;
+
+	dev_set_drvdata(dev, mg);
+
+	mg->pdev = pdev;
+	mg->irq = irq;
+	mg->irq_base = pdata->gpio_base + MSIC_GPIO_IRQ_OFFSET;
+	mg->chip.label = "msic_gpio";
+	mg->chip.direction_input = msic_gpio_direction_input;
+	mg->chip.direction_output = msic_gpio_direction_output;
+	mg->chip.get = msic_gpio_get;
+	mg->chip.set = msic_gpio_set;
+	mg->chip.to_irq = msic_gpio_to_irq;
+	mg->chip.base = pdata->gpio_base;
+	mg->chip.ngpio = MSIC_NUM_GPIO;
+	mg->chip.can_sleep = 1;
+	mg->chip.dev = dev;
+
+	mutex_init(&mg->buslock);
+
+	retval = gpiochip_add(&mg->chip);
+	if (retval) {
+		dev_err(dev, "Adding MSIC gpio chip failed\n");
+		goto err;
+	}
+
+	for (i = 0; i < mg->chip.ngpio; i++) {
+		irq_set_chip_data(i + mg->irq_base, mg);
+		irq_set_chip_and_handler_name(i + mg->irq_base,
+					      &msic_irqchip,
+					      handle_simple_irq,
+					      "demux");
+	}
+	irq_set_chained_handler(mg->irq, msic_gpio_irq_handler);
+	irq_set_handler_data(mg->irq, mg);
+
+	return 0;
+err:
+	kfree(mg);
+	return retval;
+}
+
+static struct platform_driver platform_msic_gpio_driver = {
+	.driver = {
+		.name		= "msic_gpio",
+		.owner		= THIS_MODULE,
+	},
+	.probe		= platform_msic_gpio_probe,
+};
+
+static int __init platform_msic_gpio_init(void)
+{
+	return platform_driver_register(&platform_msic_gpio_driver);
+}
+
+subsys_initcall(platform_msic_gpio_init);
+
+MODULE_AUTHOR("Mathias Nyman <mathias.nyman@linux.intel.com>");
+MODULE_DESCRIPTION("Intel Medfield MSIC GPIO driver");
+MODULE_LICENSE("GPL v2");

drivers/gpio/gpio-mxc.c

@@ -417,7 +417,7 @@ static int __devinit mxc_gpio_probe(struct platform_device *pdev)
 	err = bgpio_init(&port->bgc, &pdev->dev, 4,
 			 port->base + GPIO_PSR,
 			 port->base + GPIO_DR, NULL,
-			 port->base + GPIO_GDIR, NULL, false);
+			 port->base + GPIO_GDIR, NULL, 0);
 	if (err)
 		goto out_iounmap;
 

drivers/gpio/gpio-mxs.c

@@ -244,7 +244,7 @@ static int __devinit mxs_gpio_probe(struct platform_device *pdev)
 	err = bgpio_init(&port->bgc, &pdev->dev, 4,
 			 port->base + PINCTRL_DIN(port->id),
 			 port->base + PINCTRL_DOUT(port->id), NULL,
-			 port->base + PINCTRL_DOE(port->id), NULL, false);
+			 port->base + PINCTRL_DOE(port->id), NULL, 0);
 	if (err)
 		goto out_iounmap;
 

drivers/gpio/gpio-omap.c

@@ -57,14 +57,10 @@ struct gpio_bank {
 	u16 irq;
 	int irq_base;
 	struct irq_domain *domain;
-	u32 suspend_wakeup;
-	u32 saved_wakeup;
 	u32 non_wakeup_gpios;
 	u32 enabled_non_wakeup_gpios;
 	struct gpio_regs context;
 	u32 saved_datain;
-	u32 saved_fallingdetect;
-	u32 saved_risingdetect;
 	u32 level_mask;
 	u32 toggle_mask;
 	spinlock_t lock;
@@ -516,11 +512,11 @@ static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable)
 
 	spin_lock_irqsave(&bank->lock, flags);
 	if (enable)
-		bank->suspend_wakeup |= gpio_bit;
+		bank->context.wake_en |= gpio_bit;
 	else
-		bank->suspend_wakeup &= ~gpio_bit;
+		bank->context.wake_en &= ~gpio_bit;
 
-	__raw_writel(bank->suspend_wakeup, bank->base + bank->regs->wkup_en);
+	__raw_writel(bank->context.wake_en, bank->base + bank->regs->wkup_en);
 	spin_unlock_irqrestore(&bank->lock, flags);
 
 	return 0;
@@ -640,7 +636,6 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
 	u32 isr;
 	unsigned int gpio_irq, gpio_index;
 	struct gpio_bank *bank;
-	u32 retrigger = 0;
 	int unmasked = 0;
 	struct irq_chip *chip = irq_desc_get_chip(desc);
 
@@ -677,8 +672,6 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
 			chained_irq_exit(chip, desc);
 		}
 
-		isr |= retrigger;
-		retrigger = 0;
 		if (!isr)
 			break;
 
@@ -789,8 +782,7 @@ static int omap_mpuio_suspend_noirq(struct device *dev)
 	unsigned long		flags;
 
 	spin_lock_irqsave(&bank->lock, flags);
-	bank->saved_wakeup = __raw_readl(mask_reg);
-	__raw_writel(0xffff & ~bank->suspend_wakeup, mask_reg);
+	__raw_writel(0xffff & ~bank->context.wake_en, mask_reg);
 	spin_unlock_irqrestore(&bank->lock, flags);
 
 	return 0;
@@ -805,7 +797,7 @@ static int omap_mpuio_resume_noirq(struct device *dev)
 	unsigned long		flags;
 
 	spin_lock_irqsave(&bank->lock, flags);
-	__raw_writel(bank->saved_wakeup, mask_reg);
+	__raw_writel(bank->context.wake_en, mask_reg);
 	spin_unlock_irqrestore(&bank->lock, flags);
 
 	return 0;
@@ -1152,54 +1144,6 @@ static int __devinit omap_gpio_probe(struct platform_device *pdev)
 
 #ifdef CONFIG_ARCH_OMAP2PLUS
 
-#if defined(CONFIG_PM_SLEEP)
-static int omap_gpio_suspend(struct device *dev)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	struct gpio_bank *bank = platform_get_drvdata(pdev);
-	void __iomem *base = bank->base;
-	void __iomem *wakeup_enable;
-	unsigned long flags;
-
-	if (!bank->mod_usage || !bank->loses_context)
-		return 0;
-
-	if (!bank->regs->wkup_en || !bank->suspend_wakeup)
-		return 0;
-
-	wakeup_enable = bank->base + bank->regs->wkup_en;
-
-	spin_lock_irqsave(&bank->lock, flags);
-	bank->saved_wakeup = __raw_readl(wakeup_enable);
-	_gpio_rmw(base, bank->regs->wkup_en, 0xffffffff, 0);
-	_gpio_rmw(base, bank->regs->wkup_en, bank->suspend_wakeup, 1);
-	spin_unlock_irqrestore(&bank->lock, flags);
-
-	return 0;
-}
-
-static int omap_gpio_resume(struct device *dev)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	struct gpio_bank *bank = platform_get_drvdata(pdev);
-	void __iomem *base = bank->base;
-	unsigned long flags;
-
-	if (!bank->mod_usage || !bank->loses_context)
-		return 0;
-
-	if (!bank->regs->wkup_en || !bank->saved_wakeup)
-		return 0;
-
-	spin_lock_irqsave(&bank->lock, flags);
-	_gpio_rmw(base, bank->regs->wkup_en, 0xffffffff, 0);
-	_gpio_rmw(base, bank->regs->wkup_en, bank->saved_wakeup, 1);
-	spin_unlock_irqrestore(&bank->lock, flags);
-
-	return 0;
-}
-#endif /* CONFIG_PM_SLEEP */
-
 #if defined(CONFIG_PM_RUNTIME)
 static void omap_gpio_restore_context(struct gpio_bank *bank);
 
@@ -1233,6 +1177,9 @@ static int omap_gpio_runtime_suspend(struct device *dev)
 		__raw_writel(wake_hi | bank->context.risingdetect,
 			     bank->base + bank->regs->risingdetect);
 
+	if (!bank->enabled_non_wakeup_gpios)
+		goto update_gpio_context_count;
+
 	if (bank->power_mode != OFF_MODE) {
 		bank->power_mode = 0;
 		goto update_gpio_context_count;
@@ -1244,11 +1191,9 @@ static int omap_gpio_runtime_suspend(struct device *dev)
 	 */
 	bank->saved_datain = __raw_readl(bank->base +
 						bank->regs->datain);
-	l1 = __raw_readl(bank->base + bank->regs->fallingdetect);
-	l2 = __raw_readl(bank->base + bank->regs->risingdetect);
+	l1 = bank->context.fallingdetect;
+	l2 = bank->context.risingdetect;
 
-	bank->saved_fallingdetect = l1;
-	bank->saved_risingdetect = l2;
 	l1 &= ~bank->enabled_non_wakeup_gpios;
 	l2 &= ~bank->enabled_non_wakeup_gpios;
 
@@ -1290,16 +1235,10 @@ static int omap_gpio_runtime_resume(struct device *dev)
 	__raw_writel(bank->context.risingdetect,
 		     bank->base + bank->regs->risingdetect);
 
-	if (!bank->workaround_enabled) {
-		spin_unlock_irqrestore(&bank->lock, flags);
-		return 0;
-	}
-
 	if (bank->get_context_loss_count) {
 		context_lost_cnt_after =
 			bank->get_context_loss_count(bank->dev);
-		if (context_lost_cnt_after != bank->context_loss_count ||
-						!context_lost_cnt_after) {
+		if (context_lost_cnt_after != bank->context_loss_count) {
 			omap_gpio_restore_context(bank);
 		} else {
 			spin_unlock_irqrestore(&bank->lock, flags);
@@ -1307,9 +1246,14 @@ static int omap_gpio_runtime_resume(struct device *dev)
 		}
 	}
 
-	__raw_writel(bank->saved_fallingdetect,
+	if (!bank->workaround_enabled) {
+		spin_unlock_irqrestore(&bank->lock, flags);
+		return 0;
+	}
+
+	__raw_writel(bank->context.fallingdetect,
 			bank->base + bank->regs->fallingdetect);
-	__raw_writel(bank->saved_risingdetect,
+	__raw_writel(bank->context.risingdetect,
 			bank->base + bank->regs->risingdetect);
 	l = __raw_readl(bank->base + bank->regs->datain);
 
@@ -1326,14 +1270,15 @@ static int omap_gpio_runtime_resume(struct device *dev)
 	 * No need to generate IRQs for the rising edge for gpio IRQs
 	 * configured with falling edge only; and vice versa.
 	 */
-	gen0 = l & bank->saved_fallingdetect;
+	gen0 = l & bank->context.fallingdetect;
 	gen0 &= bank->saved_datain;
 
-	gen1 = l & bank->saved_risingdetect;
+	gen1 = l & bank->context.risingdetect;
 	gen1 &= ~(bank->saved_datain);
 
 	/* FIXME: Consider GPIO IRQs with level detections properly! */
-	gen = l & (~(bank->saved_fallingdetect) & ~(bank->saved_risingdetect));
+	gen = l & (~(bank->context.fallingdetect) &
+					 ~(bank->context.risingdetect));
 	/* Consider all GPIO IRQs needed to be updated */
 	gen |= gen0 | gen1;
 
@@ -1343,14 +1288,14 @@ static int omap_gpio_runtime_resume(struct device *dev)
 		old0 = __raw_readl(bank->base + bank->regs->leveldetect0);
 		old1 = __raw_readl(bank->base + bank->regs->leveldetect1);
 
-		if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
+		if (!bank->regs->irqstatus_raw0) {
 			__raw_writel(old0 | gen, bank->base +
 						bank->regs->leveldetect0);
 			__raw_writel(old1 | gen, bank->base +
 						bank->regs->leveldetect1);
 		}
 
-		if (cpu_is_omap44xx()) {
+		if (bank->regs->irqstatus_raw0) {
 			__raw_writel(old0 | l, bank->base +
 						bank->regs->leveldetect0);
 			__raw_writel(old1 | l, bank->base +
@@ -1429,14 +1374,11 @@ static void omap_gpio_restore_context(struct gpio_bank *bank)
 }
 #endif /* CONFIG_PM_RUNTIME */
 #else
-#define omap_gpio_suspend NULL
-#define omap_gpio_resume NULL
 #define omap_gpio_runtime_suspend NULL
 #define omap_gpio_runtime_resume NULL
 #endif
 
 static const struct dev_pm_ops gpio_pm_ops = {
-	SET_SYSTEM_SLEEP_PM_OPS(omap_gpio_suspend, omap_gpio_resume)
 	SET_RUNTIME_PM_OPS(omap_gpio_runtime_suspend, omap_gpio_runtime_resume,
 									NULL)
 };

drivers/gpio/gpio-pca953x.c

@@ -28,6 +28,8 @@
 #define PCA953X_INVERT		2
 #define PCA953X_DIRECTION	3
 
+#define REG_ADDR_AI		0x80
+
 #define PCA957X_IN		0
 #define PCA957X_INVRT		1
 #define PCA957X_BKEN		2
@@ -63,15 +65,15 @@ static const struct i2c_device_id pca953x_id[] = {
 	{ "pca6107", 8  | PCA953X_TYPE | PCA_INT, },
 	{ "tca6408", 8  | PCA953X_TYPE | PCA_INT, },
 	{ "tca6416", 16 | PCA953X_TYPE | PCA_INT, },
-	/* NYET:  { "tca6424", 24, }, */
+	{ "tca6424", 24 | PCA953X_TYPE | PCA_INT, },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, pca953x_id);
 
 struct pca953x_chip {
 	unsigned gpio_start;
-	uint16_t reg_output;
-	uint16_t reg_direction;
+	u32 reg_output;
+	u32 reg_direction;
 	struct mutex i2c_lock;
 
 #ifdef CONFIG_GPIO_PCA953X_IRQ
@@ -89,12 +91,20 @@ struct pca953x_chip {
 	int	chip_type;
 };
 
-static int pca953x_write_reg(struct pca953x_chip *chip, int reg, uint16_t val)
+static int pca953x_write_reg(struct pca953x_chip *chip, int reg, u32 val)
 {
 	int ret = 0;
 
 	if (chip->gpio_chip.ngpio <= 8)
 		ret = i2c_smbus_write_byte_data(chip->client, reg, val);
+	else if (chip->gpio_chip.ngpio == 24) {
+		ret = i2c_smbus_write_word_data(chip->client,
+						(reg << 2) | REG_ADDR_AI,
+						val & 0xffff);
+		ret = i2c_smbus_write_byte_data(chip->client,
+						(reg << 2) + 2,
+						(val & 0xff0000) >> 16);
+	}
 	else {
 		switch (chip->chip_type) {
 		case PCA953X_TYPE:
@@ -121,12 +131,17 @@ static int pca953x_write_reg(struct pca953x_chip *chip, int reg, uint16_t val)
 	return 0;
 }
 
-static int pca953x_read_reg(struct pca953x_chip *chip, int reg, uint16_t *val)
+static int pca953x_read_reg(struct pca953x_chip *chip, int reg, u32 *val)
 {
 	int ret;
 
 	if (chip->gpio_chip.ngpio <= 8)
 		ret = i2c_smbus_read_byte_data(chip->client, reg);
+	else if (chip->gpio_chip.ngpio == 24) {
+		ret =  i2c_smbus_read_word_data(chip->client, reg << 2);
+		ret |= (i2c_smbus_read_byte_data(chip->client,
+						 (reg << 2) + 2)<<16);
+	}
 	else
 		ret = i2c_smbus_read_word_data(chip->client, reg << 1);
 
@@ -135,14 +150,14 @@ static int pca953x_read_reg(struct pca953x_chip *chip, int reg, uint16_t *val)
 		return ret;
 	}
 
-	*val = (uint16_t)ret;
+	*val = (u32)ret;
 	return 0;
 }
 
 static int pca953x_gpio_direction_input(struct gpio_chip *gc, unsigned off)
 {
 	struct pca953x_chip *chip;
-	uint16_t reg_val;
+	uint reg_val;
 	int ret, offset = 0;
 
 	chip = container_of(gc, struct pca953x_chip, gpio_chip);
@@ -173,7 +188,7 @@ static int pca953x_gpio_direction_output(struct gpio_chip *gc,
 		unsigned off, int val)
 {
 	struct pca953x_chip *chip;
-	uint16_t reg_val;
+	uint reg_val;
 	int ret, offset = 0;
 
 	chip = container_of(gc, struct pca953x_chip, gpio_chip);
@@ -223,7 +238,7 @@ static int pca953x_gpio_direction_output(struct gpio_chip *gc,
 static int pca953x_gpio_get_value(struct gpio_chip *gc, unsigned off)
 {
 	struct pca953x_chip *chip;
-	uint16_t reg_val;
+	u32 reg_val;
 	int ret, offset = 0;
 
 	chip = container_of(gc, struct pca953x_chip, gpio_chip);
@@ -253,7 +268,7 @@ static int pca953x_gpio_get_value(struct gpio_chip *gc, unsigned off)
 static void pca953x_gpio_set_value(struct gpio_chip *gc, unsigned off, int val)
 {
 	struct pca953x_chip *chip;
-	uint16_t reg_val;
+	u32 reg_val;
 	int ret, offset = 0;
 
 	chip = container_of(gc, struct pca953x_chip, gpio_chip);
@@ -386,7 +401,7 @@ static struct irq_chip pca953x_irq_chip = {
 
 static uint16_t pca953x_irq_pending(struct pca953x_chip *chip)
 {
-	uint16_t cur_stat;
+	u32 cur_stat;
 	uint16_t old_stat;
 	uint16_t pending;
 	uint16_t trigger;
@@ -449,6 +464,7 @@ static int pca953x_irq_setup(struct pca953x_chip *chip,
 {
 	struct i2c_client *client = chip->client;
 	int ret, offset = 0;
+	u32 temporary;
 
 	if (irq_base != -1
 			&& (id->driver_data & PCA_INT)) {
@@ -462,7 +478,8 @@ static int pca953x_irq_setup(struct pca953x_chip *chip,
 			offset = PCA957X_IN;
 			break;
 		}
-		ret = pca953x_read_reg(chip, offset, &chip->irq_stat);
+		ret = pca953x_read_reg(chip, offset, &temporary);
+		chip->irq_stat = temporary;
 		if (ret)
 			goto out_failed;
 
@@ -603,7 +620,7 @@ static int __devinit device_pca953x_init(struct pca953x_chip *chip, int invert)
 static int __devinit device_pca957x_init(struct pca953x_chip *chip, int invert)
 {
 	int ret;
-	uint16_t val = 0;
+	u32 val = 0;
 
 	/* Let every port in proper state, that could save power */
 	pca953x_write_reg(chip, PCA957X_PUPD, 0x0);

drivers/gpio/gpio-pch.c

@@ -538,17 +538,7 @@ static struct pci_driver pch_gpio_driver = {
 	.resume = pch_gpio_resume
 };
 
-static int __init pch_gpio_pci_init(void)
-{
-	return pci_register_driver(&pch_gpio_driver);
-}
-module_init(pch_gpio_pci_init);
-
-static void __exit pch_gpio_pci_exit(void)
-{
-	pci_unregister_driver(&pch_gpio_driver);
-}
-module_exit(pch_gpio_pci_exit);
+module_pci_driver(pch_gpio_driver);
 
 MODULE_DESCRIPTION("PCH GPIO PCI Driver");
 MODULE_LICENSE("GPL");

drivers/gpio/gpio-rc5t583.c

+/*
+ * GPIO driver for RICOH583 power management chip.
+ *
+ * Copyright (c) 2012, NVIDIA CORPORATION.  All rights reserved.
+ * Author: Laxman dewangan <ldewangan@nvidia.com>
+ *
+ * Based on code
+ *	Copyright (C) 2011 RICOH COMPANY,LTD
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/device.h>
+#include <linux/gpio.h>
+#include <linux/mfd/rc5t583.h>
+
+struct rc5t583_gpio {
+	struct gpio_chip gpio_chip;
+	struct rc5t583 *rc5t583;
+};
+
+static inline struct rc5t583_gpio *to_rc5t583_gpio(struct gpio_chip *chip)
+{
+	return container_of(chip, struct rc5t583_gpio, gpio_chip);
+}
+
+static int rc5t583_gpio_get(struct gpio_chip *gc, unsigned int offset)
+{
+	struct rc5t583_gpio *rc5t583_gpio = to_rc5t583_gpio(gc);
+	struct device *parent = rc5t583_gpio->rc5t583->dev;
+	uint8_t val = 0;
+	int ret;
+
+	ret = rc5t583_read(parent, RC5T583_GPIO_MON_IOIN, &val);
+	if (ret < 0)
+		return ret;
+
+	return !!(val & BIT(offset));
+}
+
+static void rc5t583_gpio_set(struct gpio_chip *gc, unsigned int offset, int val)
+{
+	struct rc5t583_gpio *rc5t583_gpio = to_rc5t583_gpio(gc);
+	struct device *parent = rc5t583_gpio->rc5t583->dev;
+	if (val)
+		rc5t583_set_bits(parent, RC5T583_GPIO_IOOUT, BIT(offset));
+	else
+		rc5t583_clear_bits(parent, RC5T583_GPIO_IOOUT, BIT(offset));
+}
+
+static int rc5t583_gpio_dir_input(struct gpio_chip *gc, unsigned int offset)
+{
+	struct rc5t583_gpio *rc5t583_gpio = to_rc5t583_gpio(gc);
+	struct device *parent = rc5t583_gpio->rc5t583->dev;
+	int ret;
+
+	ret = rc5t583_clear_bits(parent, RC5T583_GPIO_IOSEL, BIT(offset));
+	if (ret < 0)
+		return ret;
+
+	/* Set pin to gpio mode */
+	return rc5t583_clear_bits(parent, RC5T583_GPIO_PGSEL, BIT(offset));
+}
+
+static int rc5t583_gpio_dir_output(struct gpio_chip *gc, unsigned offset,
+			int value)
+{
+	struct rc5t583_gpio *rc5t583_gpio = to_rc5t583_gpio(gc);
+	struct device *parent = rc5t583_gpio->rc5t583->dev;
+	int ret;
+
+	rc5t583_gpio_set(gc, offset, value);
+	ret = rc5t583_set_bits(parent, RC5T583_GPIO_IOSEL, BIT(offset));
+	if (ret < 0)
+		return ret;
+
+	/* Set pin to gpio mode */
+	return rc5t583_clear_bits(parent, RC5T583_GPIO_PGSEL, BIT(offset));
+}
+
+static int rc5t583_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
+{
+	struct rc5t583_gpio *rc5t583_gpio = to_rc5t583_gpio(gc);
+
+	if ((offset >= 0) && (offset < 8))
+		return rc5t583_gpio->rc5t583->irq_base +
+				RC5T583_IRQ_GPIO0 + offset;
+	return -EINVAL;
+}
+
+static void rc5t583_gpio_free(struct gpio_chip *gc, unsigned offset)
+{
+	struct rc5t583_gpio *rc5t583_gpio = to_rc5t583_gpio(gc);
+	struct device *parent = rc5t583_gpio->rc5t583->dev;
+
+	rc5t583_set_bits(parent, RC5T583_GPIO_PGSEL, BIT(offset));
+}
+
+static int __devinit rc5t583_gpio_probe(struct platform_device *pdev)
+{
+	struct rc5t583 *rc5t583 = dev_get_drvdata(pdev->dev.parent);
+	struct rc5t583_platform_data *pdata = dev_get_platdata(rc5t583->dev);
+	struct rc5t583_gpio *rc5t583_gpio;
+
+	rc5t583_gpio = devm_kzalloc(&pdev->dev, sizeof(*rc5t583_gpio),
+					GFP_KERNEL);
+	if (!rc5t583_gpio) {
+		dev_warn(&pdev->dev, "Mem allocation for rc5t583_gpio failed");
+		return -ENOMEM;
+	}
+
+	rc5t583_gpio->gpio_chip.label = "gpio-rc5t583",
+	rc5t583_gpio->gpio_chip.owner = THIS_MODULE,
+	rc5t583_gpio->gpio_chip.free = rc5t583_gpio_free,
+	rc5t583_gpio->gpio_chip.direction_input = rc5t583_gpio_dir_input,
+	rc5t583_gpio->gpio_chip.direction_output = rc5t583_gpio_dir_output,
+	rc5t583_gpio->gpio_chip.set = rc5t583_gpio_set,
+	rc5t583_gpio->gpio_chip.get = rc5t583_gpio_get,
+	rc5t583_gpio->gpio_chip.to_irq = rc5t583_gpio_to_irq,
+	rc5t583_gpio->gpio_chip.ngpio = RC5T583_MAX_GPIO,
+	rc5t583_gpio->gpio_chip.can_sleep = 1,
+	rc5t583_gpio->gpio_chip.dev = &pdev->dev;
+	rc5t583_gpio->gpio_chip.base = -1;
+	rc5t583_gpio->rc5t583 = rc5t583;
+
+	if (pdata && pdata->gpio_base)
+		rc5t583_gpio->gpio_chip.base = pdata->gpio_base;
+
+	platform_set_drvdata(pdev, rc5t583_gpio);
+
+	return gpiochip_add(&rc5t583_gpio->gpio_chip);
+}
+
+static int __devexit rc5t583_gpio_remove(struct platform_device *pdev)
+{
+	struct rc5t583_gpio *rc5t583_gpio = platform_get_drvdata(pdev);
+
+	return gpiochip_remove(&rc5t583_gpio->gpio_chip);
+}
+
+static struct platform_driver rc5t583_gpio_driver = {
+	.driver = {
+		.name    = "rc5t583-gpio",
+		.owner   = THIS_MODULE,
+	},
+	.probe		= rc5t583_gpio_probe,
+	.remove		= __devexit_p(rc5t583_gpio_remove),
+};
+
+static int __init rc5t583_gpio_init(void)
+{
+	return platform_driver_register(&rc5t583_gpio_driver);
+}
+subsys_initcall(rc5t583_gpio_init);
+
+static void __exit rc5t583_gpio_exit(void)
+{
+	platform_driver_unregister(&rc5t583_gpio_driver);
+}
+module_exit(rc5t583_gpio_exit);
+
+MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>");
+MODULE_DESCRIPTION("GPIO interface for RC5T583");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:rc5t583-gpio");

drivers/gpio/gpio-sodaville.c

@@ -224,7 +224,7 @@ static int __devinit sdv_gpio_probe(struct pci_dev *pdev,
 
 	ret = bgpio_init(&sd->bgpio, &pdev->dev, 4,
 			sd->gpio_pub_base + GPINR, sd->gpio_pub_base + GPOUTR,
-			NULL, sd->gpio_pub_base + GPOER, NULL, false);
+			NULL, sd->gpio_pub_base + GPOER, NULL, 0);
 	if (ret)
 		goto unmap;
 	sd->bgpio.gc.ngpio = SDV_NUM_PUB_GPIOS;
@@ -282,17 +282,7 @@ static struct pci_driver sdv_gpio_driver = {
 	.remove = sdv_gpio_remove,
 };
 
-static int __init sdv_gpio_init(void)
-{
-	return pci_register_driver(&sdv_gpio_driver);
-}
-module_init(sdv_gpio_init);
-
-static void __exit sdv_gpio_exit(void)
-{
-	pci_unregister_driver(&sdv_gpio_driver);
-}
-module_exit(sdv_gpio_exit);
+module_pci_driver(sdv_gpio_driver);
 
 MODULE_AUTHOR("Hans J. Koch <hjk@linutronix.de>");
 MODULE_DESCRIPTION("GPIO interface for Intel Sodaville SoCs");

drivers/of/gpio.c → drivers/gpio/gpiolib-of.c

@@ -15,11 +15,39 @@
 #include <linux/errno.h>
 #include <linux/module.h>
 #include <linux/io.h>
+#include <linux/gpio.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_gpio.h>
 #include <linux/slab.h>
 
+/* Private data structure for of_gpiochip_is_match */
+struct gg_data {
+	enum of_gpio_flags *flags;
+	struct of_phandle_args gpiospec;
+
+	int out_gpio;
+};
+
+/* Private function for resolving node pointer to gpio_chip */
+static int of_gpiochip_find_and_xlate(struct gpio_chip *gc, void *data)
+{
+	struct gg_data *gg_data = data;
+	int ret;
+
+	if ((gc->of_node != gg_data->gpiospec.np) ||
+	    (gc->of_gpio_n_cells != gg_data->gpiospec.args_count) ||
+	    (!gc->of_xlate))
+		return false;
+
+	ret = gc->of_xlate(gc, &gg_data->gpiospec, gg_data->flags);
+	if (ret < 0)
+		return false;
+
+	gg_data->out_gpio = ret + gc->base;
+	return true;
+}
+
 /**
  * of_get_named_gpio_flags() - Get a GPIO number and flags to use with GPIO API
  * @np:		device node to get GPIO from
@@ -34,46 +62,25 @@
 int of_get_named_gpio_flags(struct device_node *np, const char *propname,
                            int index, enum of_gpio_flags *flags)
 {
+	struct gg_data gg_data = { .flags = flags, .out_gpio = -ENODEV };
 	int ret;
-	struct gpio_chip *gc;
-	struct of_phandle_args gpiospec;
+
+	/* .of_xlate might decide to not fill in the flags, so clear it. */
+	if (flags)
+		*flags = 0;
 
 	ret = of_parse_phandle_with_args(np, propname, "#gpio-cells", index,
-					 &gpiospec);
+					 &gg_data.gpiospec);
 	if (ret) {
 		pr_debug("%s: can't parse gpios property\n", __func__);
-		goto err0;
-	}
-
-	gc = of_node_to_gpiochip(gpiospec.np);
-	if (!gc) {
-		pr_debug("%s: gpio controller %s isn't registered\n",
-			 np->full_name, gpiospec.np->full_name);
-		ret = -ENODEV;
-		goto err1;
-	}
-
-	if (gpiospec.args_count != gc->of_gpio_n_cells) {
-		pr_debug("%s: wrong #gpio-cells for %s\n",
-			 np->full_name, gpiospec.np->full_name);
-		ret = -EINVAL;
-		goto err1;
+		return -EINVAL;
 	}
 
-	/* .xlate might decide to not fill in the flags, so clear it. */
-	if (flags)
-		*flags = 0;
-
-	ret = gc->of_xlate(gc, &gpiospec, flags);
-	if (ret < 0)
-		goto err1;
+	gpiochip_find(&gg_data, of_gpiochip_find_and_xlate);
 
-	ret += gc->base;
-err1:
-	of_node_put(gpiospec.np);
-err0:
+	of_node_put(gg_data.gpiospec.np);
 	pr_debug("%s exited with status %d\n", __func__, ret);
-	return ret;
+	return gg_data.out_gpio;
 }
 EXPORT_SYMBOL(of_get_named_gpio_flags);
 
@@ -227,14 +234,3 @@ void of_gpiochip_remove(struct gpio_chip *chip)
 	if (chip->of_node)
 		of_node_put(chip->of_node);
 }
-
-/* Private function for resolving node pointer to gpio_chip */
-static int of_gpiochip_is_match(struct gpio_chip *chip, const void *data)
-{
-	return chip->of_node == data;
-}
-
-struct gpio_chip *of_node_to_gpiochip(struct device_node *np)
-{
-	return gpiochip_find(np, of_gpiochip_is_match);
-}

drivers/gpio/gpiolib.c

@@ -1093,7 +1093,7 @@ int gpiochip_add(struct gpio_chip *chip)
 	if (status)
 		goto fail;
 
-	pr_info("gpiochip_add: registered GPIOs %d to %d on device: %s\n",
+	pr_debug("gpiochip_add: registered GPIOs %d to %d on device: %s\n",
 		chip->base, chip->base + chip->ngpio - 1,
 		chip->label ? : "generic");
 
@@ -1154,9 +1154,9 @@ EXPORT_SYMBOL_GPL(gpiochip_remove);
  * non-zero, this function will return to the caller and not iterate over any
  * more gpio_chips.
  */
-struct gpio_chip *gpiochip_find(const void *data,
+struct gpio_chip *gpiochip_find(void *data,
 				int (*match)(struct gpio_chip *chip,
-					     const void *data))
+					     void *data))
 {
 	struct gpio_chip *chip = NULL;
 	unsigned long flags;
@@ -1302,8 +1302,18 @@ int gpio_request_one(unsigned gpio, unsigned long flags, const char *label)
 				(flags & GPIOF_INIT_HIGH) ? 1 : 0);
 
 	if (err)
-		gpio_free(gpio);
+		goto free_gpio;
+
+	if (flags & GPIOF_EXPORT) {
+		err = gpio_export(gpio, flags & GPIOF_EXPORT_CHANGEABLE);
+		if (err)
+			goto free_gpio;
+	}
+
+	return 0;
 
+ free_gpio:
+	gpio_free(gpio);
 	return err;
 }
 EXPORT_SYMBOL_GPL(gpio_request_one);

drivers/of/Kconfig

@@ -51,12 +51,6 @@ config OF_IRQ
 config OF_DEVICE
 	def_bool y
 
-config OF_GPIO
-	def_bool y
-	depends on GPIOLIB && !SPARC
-	help
-	  OpenFirmware GPIO accessors
-
 config OF_I2C
 	def_tristate I2C
 	depends on I2C && !SPARC

drivers/of/Makefile

@@ -4,7 +4,6 @@ obj-$(CONFIG_OF_PROMTREE) += pdt.o
 obj-$(CONFIG_OF_ADDRESS)  += address.o
 obj-$(CONFIG_OF_IRQ)    += irq.o
 obj-$(CONFIG_OF_DEVICE) += device.o platform.o
-obj-$(CONFIG_OF_GPIO)   += gpio.o
 obj-$(CONFIG_OF_I2C)	+= of_i2c.o
 obj-$(CONFIG_OF_NET)	+= of_net.o
 obj-$(CONFIG_OF_SELFTEST) += selftest.o

include/asm-generic/gpio.h

@@ -142,9 +142,9 @@ extern int __must_check gpiochip_reserve(int start, int ngpio);
 /* add/remove chips */
 extern int gpiochip_add(struct gpio_chip *chip);
 extern int __must_check gpiochip_remove(struct gpio_chip *chip);
-extern struct gpio_chip *gpiochip_find(const void *data,
+extern struct gpio_chip *gpiochip_find(void *data,
 					int (*match)(struct gpio_chip *chip,
-						     const void *data));
+						     void *data));
 
 
 /* Always use the library code for GPIO management calls,
@@ -179,6 +179,8 @@ extern void gpio_free_array(const struct gpio *array, size_t num);
 
 /* bindings for managed devices that want to request gpios */
 int devm_gpio_request(struct device *dev, unsigned gpio, const char *label);
+int devm_gpio_request_one(struct device *dev, unsigned gpio,
+			  unsigned long flags, const char *label);
 void devm_gpio_free(struct device *dev, unsigned int gpio);
 
 #ifdef CONFIG_GPIO_SYSFS

include/linux/basic_mmio_gpio.h

@@ -67,6 +67,10 @@ int bgpio_remove(struct bgpio_chip *bgc);
 int bgpio_init(struct bgpio_chip *bgc, struct device *dev,
 	       unsigned long sz, void __iomem *dat, void __iomem *set,
 	       void __iomem *clr, void __iomem *dirout, void __iomem *dirin,
-	       bool big_endian);
+	       unsigned long flags);
+
+#define BGPIOF_BIG_ENDIAN		BIT(0)
+#define BGPIOF_UNREADABLE_REG_SET	BIT(1) /* reg_set is unreadable */
+#define BGPIOF_UNREADABLE_REG_DIR	BIT(2) /* reg_dir is unreadable */
 
 #endif /* __BASIC_MMIO_GPIO_H */

include/linux/gpio.h

 #ifndef __LINUX_GPIO_H
 #define __LINUX_GPIO_H
 
+#include <linux/errno.h>
+
 /* see Documentation/gpio.txt */
 
 /* make these flag values available regardless of GPIO kconfig options */
@@ -20,6 +22,11 @@
 /* Gpio pin is open source */
 #define GPIOF_OPEN_SOURCE	(1 << 3)
 
+#define GPIOF_EXPORT		(1 << 2)
+#define GPIOF_EXPORT_CHANGEABLE	(1 << 3)
+#define GPIOF_EXPORT_DIR_FIXED	(GPIOF_EXPORT)
+#define GPIOF_EXPORT_DIR_CHANGEABLE (GPIOF_EXPORT | GPIOF_EXPORT_CHANGEABLE)
+
 /**
  * struct gpio - a structure describing a GPIO with configuration
  * @gpio:	the GPIO number
@@ -33,7 +40,39 @@ struct gpio {
 };
 
 #ifdef CONFIG_GENERIC_GPIO
+
+#ifdef CONFIG_ARCH_HAVE_CUSTOM_GPIO_H
 #include <asm/gpio.h>
+#else
+
+#include <asm-generic/gpio.h>
+
+static inline int gpio_get_value(unsigned int gpio)
+{
+	return __gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned int gpio, int value)
+{
+	__gpio_set_value(gpio, value);
+}
+
+static inline int gpio_cansleep(unsigned int gpio)
+{
+	return __gpio_cansleep(gpio);
+}
+
+static inline int gpio_to_irq(unsigned int gpio)
+{
+	return __gpio_to_irq(gpio);
+}
+
+static inline int irq_to_gpio(unsigned int irq)
+{
+	return -EINVAL;
+}
+
+#endif
 
 #else
 
@@ -55,12 +94,24 @@ static inline int gpio_request(unsigned gpio, const char *label)
 	return -ENOSYS;
 }
 
+static inline int devm_gpio_request(struct device *dev, unsigned gpio,
+				    const char *label)
+{
+	return -ENOSYS;
+}
+
 static inline int gpio_request_one(unsigned gpio,
 					unsigned long flags, const char *label)
 {
 	return -ENOSYS;
 }
 
+static inline int devm_gpio_request_one(struct device *dev, unsigned gpio,
+					unsigned long flags, const char *label)
+{
+	return -ENOSYS;
+}
+
 static inline int gpio_request_array(const struct gpio *array, size_t num)
 {
 	return -ENOSYS;
@@ -74,6 +125,14 @@ static inline void gpio_free(unsigned gpio)
 	WARN_ON(1);
 }
 
+static inline void devm_gpio_free(struct device *dev, unsigned gpio)
+{
+	might_sleep();
+
+	/* GPIO can never have been requested */
+	WARN_ON(1);
+}
+
 static inline void gpio_free_array(const struct gpio *array, size_t num)
 {
 	might_sleep();

include/linux/mfd/rc5t583.h

@@ -292,6 +292,7 @@ struct rc5t583 {
  * rc5t583_platform_data: Platform data for ricoh rc5t583 pmu.
  * The board specific data is provided through this structure.
  * @irq_base: Irq base number on which this device registers their interrupts.
+ * @gpio_base: GPIO base from which gpio of this device will start.
  * @enable_shutdown: Enable shutdown through the input pin "shutdown".
  * @regulator_deepsleep_slot: The slot number on which device goes to sleep
  *		in device sleep mode.
@@ -303,6 +304,7 @@ struct rc5t583 {
 
 struct rc5t583_platform_data {
 	int		irq_base;
+	int		gpio_base;
 	bool		enable_shutdown;
 	int		regulator_deepsleep_slot[RC5T583_REGULATOR_MAX];
 	unsigned long	regulator_ext_pwr_control[RC5T583_REGULATOR_MAX];

include/linux/of_gpio.h

@@ -58,7 +58,6 @@ extern int of_mm_gpiochip_add(struct device_node *np,
 
 extern void of_gpiochip_add(struct gpio_chip *gc);
 extern void of_gpiochip_remove(struct gpio_chip *gc);
-extern struct gpio_chip *of_node_to_gpiochip(struct device_node *np);
 extern int of_gpio_simple_xlate(struct gpio_chip *gc,
 				const struct of_phandle_args *gpiospec,
 				u32 *flags);