Commit b1cfebc9 authored by Yang Shi's avatar Yang Shi Committed by Linus Torvalds

edac: add DDR3 memory type for MPC85xx EDAC

Since some new MPC85xx SOCs support DDR3 memory now, so add DDR3 memory
type for MPC85xx EDAC.
Signed-off-by: default avatarYang Shi <yang.shi@windriver.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
parent c4285b47
......@@ -150,6 +150,8 @@ enum mem_type {
MEM_FB_DDR2, /* fully buffered DDR2 */
MEM_RDDR2, /* Registered DDR2 RAM */
MEM_XDR, /* Rambus XDR */
MEM_DDR3, /* DDR3 RAM */
MEM_RDDR3, /* Registered DDR3 RAM */
};
#define MEM_FLAG_EMPTY BIT(MEM_EMPTY)
......@@ -167,6 +169,8 @@ enum mem_type {
#define MEM_FLAG_FB_DDR2 BIT(MEM_FB_DDR2)
#define MEM_FLAG_RDDR2 BIT(MEM_RDDR2)
#define MEM_FLAG_XDR BIT(MEM_XDR)
#define MEM_FLAG_DDR3 BIT(MEM_DDR3)
#define MEM_FLAG_RDDR3 BIT(MEM_RDDR3)
/* chipset Error Detection and Correction capabilities and mode */
enum edac_type {
......
......@@ -94,7 +94,9 @@ static const char *mem_types[] = {
[MEM_DDR2] = "Unbuffered-DDR2",
[MEM_FB_DDR2] = "FullyBuffered-DDR2",
[MEM_RDDR2] = "Registered-DDR2",
[MEM_XDR] = "XDR"
[MEM_XDR] = "XDR",
[MEM_DDR3] = "Unbuffered-DDR3",
[MEM_RDDR3] = "Registered-DDR3"
};
static const char *dev_types[] = {
......
......@@ -757,6 +757,9 @@ static void __devinit mpc85xx_init_csrows(struct mem_ctl_info *mci)
case DSC_SDTYPE_DDR2:
mtype = MEM_RDDR2;
break;
case DSC_SDTYPE_DDR3:
mtype = MEM_RDDR3;
break;
default:
mtype = MEM_UNKNOWN;
break;
......@@ -769,6 +772,9 @@ static void __devinit mpc85xx_init_csrows(struct mem_ctl_info *mci)
case DSC_SDTYPE_DDR2:
mtype = MEM_DDR2;
break;
case DSC_SDTYPE_DDR3:
mtype = MEM_DDR3;
break;
default:
mtype = MEM_UNKNOWN;
break;
......
......@@ -53,6 +53,7 @@
#define DSC_SDTYPE_DDR 0x02000000
#define DSC_SDTYPE_DDR2 0x03000000
#define DSC_SDTYPE_DDR3 0x07000000
#define DSC_X32_EN 0x00000020
/* Err_Int_En */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment