dt-bindings: thermal: Convert UniPhier thermal monitor to json-schema

Convert the UniPhier thermal monitor binding to DT schema format.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Documentation/devicetree/bindings/thermal/socionext,uniphier-thermal.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/socionext,uniphier-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier thermal monitor
+
+description: |
+  This describes the devicetree bindings for thermal monitor supported by
+  PVT(Process, Voltage and Temperature) monitoring unit implemented on
+  Socionext UniPhier SoCs.
+
+maintainers:
+  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+properties:
+  compatible:
+    enum:
+      - socionext,uniphier-pxs2-thermal
+      - socionext,uniphier-ld20-thermal
+      - socionext,uniphier-pxs3-thermal
+
+  interrupts:
+    maxItems: 1
+
+  "#thermal-sensor-cells":
+    const: 0
+
+  socionext,tmod-calibration:
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32-array
+      - maxItems: 2
+    description:
+      A pair of calibrated values referred from PVT, in case that the values
+      aren't set on SoC, like a reference board.
+
+required:
+  - compatible
+  - interrupts
+  - "#thermal-sensor-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    // The UniPhier thermal should be a subnode of a "syscon" compatible node.
+
+    sysctrl@61840000 {
+        compatible = "socionext,uniphier-ld20-sysctrl",
+                     "simple-mfd", "syscon";
+        reg = <0x61840000 0x10000>;
+
+        pvtctl: thermal {
+            compatible = "socionext,uniphier-ld20-thermal";
+            interrupts = <0 3 1>;
+            #thermal-sensor-cells = <0>;
+        };
+    };

Documentation/devicetree/bindings/thermal/uniphier-thermal.txt

-* UniPhier Thermal bindings
-
-This describes the devicetree bindings for thermal monitor supported by
-PVT(Process, Voltage and Temperature) monitoring unit implemented on Socionext
-UniPhier SoCs.
-
-Required properties:
-- compatible :
-  - "socionext,uniphier-pxs2-thermal" : For UniPhier PXs2 SoC
-  - "socionext,uniphier-ld20-thermal" : For UniPhier LD20 SoC
-  - "socionext,uniphier-pxs3-thermal" : For UniPhier PXs3 SoC
-- interrupts : IRQ for the temperature alarm
-- #thermal-sensor-cells : Should be 0. See ./thermal.txt for details.
-
-Optional properties:
-- socionext,tmod-calibration: A pair of calibrated values referred from PVT,
-                              in case that the values aren't set on SoC,
-                              like a reference board.
-
-Example:
-
-	sysctrl@61840000 {
-		compatible = "socionext,uniphier-ld20-sysctrl",
-			     "simple-mfd", "syscon";
-		reg = <0x61840000 0x10000>;
-		...
-		pvtctl: pvtctl {
-			compatible = "socionext,uniphier-ld20-thermal";
-			interrupts = <0 3 1>;
-			#thermal-sensor-cells = <0>;
-		};
-		...
-	};
-
-	thermal-zones {
-		cpu_thermal {
-			polling-delay-passive = <250>;	/* 250ms */
-			polling-delay = <1000>;		/* 1000ms */
-			thermal-sensors = <&pvtctl>;
-
-			trips {
-				cpu_crit: cpu_crit {
-					temperature = <110000>;	/* 110C */
-					hysteresis = <2000>;
-					type = "critical";
-				};
-				cpu_alert: cpu_alert {
-					temperature = <100000>;	/* 100C */
-					hysteresis = <2000>;
-					type = "passive";
-				};
-			};
-
-			cooling-maps {
-				map0 {
-					trip = <&cpu_alert>;
-					cooling-device = <&cpu0 (-1) (-1)>;
-				};
-				map1 {
-					trip = <&cpu_alert>;
-					cooling-device = <&cpu2 (-1) (-1)>;
-				};
-			};
-		};
-	};