Commit b2094bba authored by Jesse Barnes's avatar Jesse Barnes Committed by Chris Wilson

drm/i915: use VDD AUX for panel power around detection and in prepare

Mode setting sequence specifies that we use VDD AUX for configuration
and detection, and early in the mode set sequence.  Only later (after
DP_A has started training) should we actually enable panel power.
Signed-off-by: default avatarJesse Barnes <jbarnes@virtuousgeek.org>
[ickle: checkpatch.pl complaining about whitespace]
Signed-off-by: default avatarChris Wilson <chris@chris-wilson.co.uk>
parent 6176b8f9
......@@ -813,6 +813,28 @@ static void ironlake_edp_panel_off (struct drm_device *dev)
POSTING_READ(PCH_PP_CONTROL);
}
static void ironlake_edp_panel_vdd_on(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
u32 pp;
pp = I915_READ(PCH_PP_CONTROL);
pp |= EDP_FORCE_VDD;
I915_WRITE(PCH_PP_CONTROL, pp);
POSTING_READ(PCH_PP_CONTROL);
}
static void ironlake_edp_panel_vdd_off(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
u32 pp;
pp = I915_READ(PCH_PP_CONTROL);
pp &= ~EDP_FORCE_VDD;
I915_WRITE(PCH_PP_CONTROL, pp);
POSTING_READ(PCH_PP_CONTROL);
}
static void ironlake_edp_backlight_on (struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
......@@ -868,7 +890,7 @@ static void intel_dp_prepare(struct drm_encoder *encoder)
if (IS_eDP(intel_dp) || IS_PCH_eDP(intel_dp)) {
ironlake_edp_backlight_off(dev);
ironlake_edp_panel_on(dev);
ironlake_edp_panel_vdd_on(dev);
ironlake_edp_pll_on(encoder);
}
if (dp_reg & DP_PORT_EN)
......@@ -885,8 +907,10 @@ static void intel_dp_commit(struct drm_encoder *encoder)
if (!(dp_reg & DP_PORT_EN)) {
intel_dp_link_train(intel_dp);
}
if (IS_eDP(intel_dp) || IS_PCH_eDP(intel_dp))
if (IS_eDP(intel_dp) || IS_PCH_eDP(intel_dp)) {
ironlake_edp_panel_on(dev);
ironlake_edp_backlight_on(dev);
}
}
static void
......@@ -1371,11 +1395,10 @@ ironlake_dp_detect(struct drm_connector *connector)
struct drm_encoder *encoder = intel_attached_encoder(connector);
struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
enum drm_connector_status status;
bool was_on = false;
/* Panel needs power for AUX to work */
if (IS_eDP(intel_dp) || IS_PCH_eDP(intel_dp))
was_on = ironlake_edp_panel_on(connector->dev);
ironlake_edp_panel_vdd_on(connector->dev);
status = connector_status_disconnected;
if (intel_dp_aux_native_read(intel_dp,
0x000, intel_dp->dpcd,
......@@ -1386,8 +1409,8 @@ ironlake_dp_detect(struct drm_connector *connector)
}
DRM_DEBUG_KMS("DPCD: %hx%hx%hx%hx\n", intel_dp->dpcd[0],
intel_dp->dpcd[1], intel_dp->dpcd[2], intel_dp->dpcd[3]);
if ((IS_eDP(intel_dp) || IS_PCH_eDP(intel_dp)) && !was_on)
ironlake_edp_panel_off(connector->dev);
if (IS_eDP(intel_dp) || IS_PCH_eDP(intel_dp))
ironlake_edp_panel_vdd_off(connector->dev);
return status;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment