Commit b22b97c1 authored by Mark Ware's avatar Mark Ware Committed by Kumar Gala

powerpc/cpm2_pic: Allow correct flow_types for port C interrupts

Port C interrupts can be either falling edge, or either edge.
Other external interrupts are either falling edge or active low.
Tested on a custom 8280 based board.
Signed-off-by: default avatarMark Ware <mware@elphinstone.net>
Acked-by: default avatarAnton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: default avatarScott Wood <scottwood@freescale.com>
Signed-off-by: default avatarKumar Gala <galak@kernel.crashing.org>
parent b387dfe9
......@@ -143,13 +143,23 @@ static int cpm2_set_irq_type(unsigned int virq, unsigned int flow_type)
struct irq_desc *desc = irq_to_desc(virq);
unsigned int vold, vnew, edibit;
if (flow_type == IRQ_TYPE_NONE)
flow_type = IRQ_TYPE_LEVEL_LOW;
if (flow_type & IRQ_TYPE_EDGE_RISING) {
printk(KERN_ERR "CPM2 PIC: sense type 0x%x not supported\n",
flow_type);
return -EINVAL;
/* Port C interrupts are either IRQ_TYPE_EDGE_FALLING or
* IRQ_TYPE_EDGE_BOTH (default). All others are IRQ_TYPE_EDGE_FALLING
* or IRQ_TYPE_LEVEL_LOW (default)
*/
if (src >= CPM2_IRQ_PORTC15 && src <= CPM2_IRQ_PORTC0) {
if (flow_type == IRQ_TYPE_NONE)
flow_type = IRQ_TYPE_EDGE_BOTH;
if (flow_type != IRQ_TYPE_EDGE_BOTH &&
flow_type != IRQ_TYPE_EDGE_FALLING)
goto err_sense;
} else {
if (flow_type == IRQ_TYPE_NONE)
flow_type = IRQ_TYPE_LEVEL_LOW;
if (flow_type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_LEVEL_HIGH))
goto err_sense;
}
desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL);
......@@ -181,6 +191,10 @@ static int cpm2_set_irq_type(unsigned int virq, unsigned int flow_type)
if (vold != vnew)
out_be32(&cpm2_intctl->ic_siexr, vnew);
return 0;
err_sense:
pr_err("CPM2 PIC: sense type 0x%x not supported\n", flow_type);
return -EINVAL;
}
static struct irq_chip cpm2_pic = {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment