Commit b259e51f authored by Aurelien Jarno's avatar Aurelien Jarno Committed by Ralf Baechle

MIPS: BPF: Fix build on pre-R2 little endian CPUs

The rotr, seh and wsbh instructions have been introduced with the R2
ISA. Thus the current BPF code fails to build on pre-R2 little endian
CPUs:

    CC      arch/mips/net/bpf_jit.o
    AS      arch/mips/net/bpf_jit_asm.o
  /home/aurel32/linux-4.2/arch/mips/net/bpf_jit_asm.S: Assembler messages:
  /home/aurel32/linux-4.2/arch/mips/net/bpf_jit_asm.S:67: Error: opcode not supported on this processor: mips32 (mips32) `wsbh $8,$19'
  /home/aurel32/linux-4.2/arch/mips/net/bpf_jit_asm.S:68: Error: opcode not supported on this processor: mips32 (mips32) `rotr $19,$8,16'
  /home/aurel32/linux-4.2/arch/mips/net/bpf_jit_asm.S:83: Error: opcode not supported on this processor: mips32 (mips32) `wsbh $8,$19'
  /home/aurel32/linux-4.2/arch/mips/net/bpf_jit_asm.S:84: Error: opcode not supported on this processor: mips32 (mips32) `seh $19,$8'
  /home/aurel32/linux-4.2/arch/mips/net/bpf_jit_asm.S:151: Error: opcode not supported on this processor: mips32 (mips32) `wsbh $8,$12'
  /home/aurel32/linux-4.2/arch/mips/net/bpf_jit_asm.S:153: Error: opcode not supported on this processor: mips32 (mips32) `rotr $19,$8,16'
  /home/aurel32/linux-4.2/arch/mips/net/bpf_jit_asm.S:164: Error: opcode not supported on this processor: mips32 (mips32) `wsbh $19,$12'
  /home/aurel32/linux-4.2/scripts/Makefile.build:294: recipe for target 'arch/mips/net/bpf_jit_asm.o' failed

Fix that by providing equivalent code for these CPUs.
Signed-off-by: default avatarAurelien Jarno <aurelien@aurel32.net>
Reviewed-by: default avatarMarkos Chandras <markos.chandras@imgtec.com>
Cc: stable@vger.kernel.org # v4.2+
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/11098/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
parent faa9724a
......@@ -64,8 +64,20 @@ sk_load_word_positive:
PTR_ADDU t1, $r_skb_data, offset
lw $r_A, 0(t1)
#ifdef CONFIG_CPU_LITTLE_ENDIAN
# if defined(__mips_isa_rev) && (__mips_isa_rev >= 2)
wsbh t0, $r_A
rotr $r_A, t0, 16
# else
sll t0, $r_A, 24
srl t1, $r_A, 24
srl t2, $r_A, 8
or t0, t0, t1
andi t2, t2, 0xff00
andi t1, $r_A, 0xff00
or t0, t0, t2
sll t1, t1, 8
or $r_A, t0, t1
# endif
#endif
jr $r_ra
move $r_ret, zero
......@@ -80,8 +92,16 @@ sk_load_half_positive:
PTR_ADDU t1, $r_skb_data, offset
lh $r_A, 0(t1)
#ifdef CONFIG_CPU_LITTLE_ENDIAN
# if defined(__mips_isa_rev) && (__mips_isa_rev >= 2)
wsbh t0, $r_A
seh $r_A, t0
# else
sll t0, $r_A, 24
andi t1, $r_A, 0xff00
sra t0, t0, 16
srl t1, t1, 8
or $r_A, t0, t1
# endif
#endif
jr $r_ra
move $r_ret, zero
......@@ -148,9 +168,22 @@ sk_load_byte_positive:
NESTED(bpf_slow_path_word, (6 * SZREG), $r_sp)
bpf_slow_path_common(4)
#ifdef CONFIG_CPU_LITTLE_ENDIAN
# if defined(__mips_isa_rev) && (__mips_isa_rev >= 2)
wsbh t0, $r_s0
jr $r_ra
rotr $r_A, t0, 16
# else
sll t0, $r_s0, 24
srl t1, $r_s0, 24
srl t2, $r_s0, 8
or t0, t0, t1
andi t2, t2, 0xff00
andi t1, $r_s0, 0xff00
or t0, t0, t2
sll t1, t1, 8
jr $r_ra
or $r_A, t0, t1
# endif
#else
jr $r_ra
move $r_A, $r_s0
......@@ -161,8 +194,17 @@ NESTED(bpf_slow_path_word, (6 * SZREG), $r_sp)
NESTED(bpf_slow_path_half, (6 * SZREG), $r_sp)
bpf_slow_path_common(2)
#ifdef CONFIG_CPU_LITTLE_ENDIAN
# if defined(__mips_isa_rev) && (__mips_isa_rev >= 2)
jr $r_ra
wsbh $r_A, $r_s0
# else
sll t0, $r_s0, 8
andi t1, $r_s0, 0xff00
andi t0, t0, 0xff00
srl t1, t1, 8
jr $r_ra
or $r_A, t0, t1
# endif
#else
jr $r_ra
move $r_A, $r_s0
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment