display/drm/bridge: TC358775 DSI/LVDS driver
This driver is tested with two panels individually with Apq8016-IFC6309 board https://www.inforcecomputing.com/products/single-board-computers-sbc/qualcomm-snapdragon-410-inforce-6309-micro-sbc 1. 1366x768@60 auo,b101xtn01 data-mapping = "jeida-24" 2. 800x480@60 innolux,at070tn92 data-mapping = "vesa-24" - power off sequence in proper order - put_unaligned_be16, put_unaligned_le32 macros used - static function for mode_valid - len initialized - MODE_CLOCK_HIGH handled properly - bus_formats handled in mode_valid - GENMASK and FIELD_PREP used - Kconfig proper indentation - error handling endpoint data-lanes - check for bus_formats unsupported - display_timings naming local variables - help modified - ~vsdelay dynamic value set based on the calculation of dsi speed, output speed, blanking - panel->connector_type removed - dual port implemented - devm_drm_panel_bridge_add method used instead of panel description modified - regulator enable and disable with proper orders and delays as per the spec - removed drm_connector_status - added bus_formats - mdelay to usleep_range - magic number to macros for CLRSI and mux registers description modified - replaced u32 instead of uint32_t - updated alphabetic order of headers - added SPDX identifier license Signed-off-by: Vinay Simha BN <simhavcs@gmail.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam.ravnborg@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/1594388491-15129-2-git-send-email-simhavcs@gmail.com
Showing
This diff is collapsed.
Please register or sign in to comment