Commit b26b4e91 authored by Linus Walleij's avatar Linus Walleij Committed by Jonathan Cameron

iio: pressure: bmp280: add SPI interface driver

This patch mimics the SPI functionality found in the misc driver in
drivers/misc/bh085-spi.c to make it possible to reuse the existing
BMP280/BMP180/BMP085 driver with all clients of the other driver.
The adoption is straight-forward since like the other driver, it is
a simple matter of using regmap.

This driver is also so obviously inspired/copied from the old misc
driver in drivers/misc/bmp085.c that I just took the liberty to
add in the authors of the other drivers + self in the core driver
file.

The MISC driver also supports a variant named "BMP181" so include
that here to be complete in comparison to the old driver.

The bus mapping code for SPI was written by Akinobu Mita.
Signed-off-by: default avatarAkinobu Mita <akinobu.mita@gmail.com>
Tested-by: default avatarAkinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: default avatarJonathan Cameron <jic23@kernel.org>
parent 17118843
...@@ -7,17 +7,20 @@ menu "Pressure sensors" ...@@ -7,17 +7,20 @@ menu "Pressure sensors"
config BMP280 config BMP280
tristate "Bosch Sensortec BMP180/BMP280 pressure sensor I2C driver" tristate "Bosch Sensortec BMP180/BMP280 pressure sensor I2C driver"
depends on I2C depends on (I2C || SPI_MASTER)
depends on !(BMP085_I2C=y || BMP085_I2C=m) depends on !(BMP085_I2C=y || BMP085_I2C=m)
depends on !(BMP085_SPI=y || BMP085_SPI=m)
select REGMAP select REGMAP
select BMP280_I2C if (I2C) select BMP280_I2C if (I2C)
select BMP280_SPI if (SPI_MASTER)
help help
Say yes here to build support for Bosch Sensortec BMP180 and BMP280 Say yes here to build support for Bosch Sensortec BMP180 and BMP280
pressure and temperature sensors. Also supports the BE280 with pressure and temperature sensors. Also supports the BE280 with
an additional humidity sensor channel. an additional humidity sensor channel.
To compile this driver as a module, choose M here: the modules To compile this driver as a module, choose M here: the core module
will be called bmp280-i2c and bmp280. will be called bmp280 and you will also get bmp280-i2c for I2C
and/or bmp280-spi for SPI support.
config BMP280_I2C config BMP280_I2C
tristate tristate
...@@ -25,6 +28,12 @@ config BMP280_I2C ...@@ -25,6 +28,12 @@ config BMP280_I2C
depends on I2C depends on I2C
select REGMAP_I2C select REGMAP_I2C
config BMP280_SPI
tristate
depends on BMP280
depends on SPI_MASTER
select REGMAP
config HID_SENSOR_PRESS config HID_SENSOR_PRESS
depends on HID_SENSOR_HUB depends on HID_SENSOR_HUB
select IIO_BUFFER select IIO_BUFFER
......
...@@ -6,6 +6,7 @@ ...@@ -6,6 +6,7 @@
obj-$(CONFIG_BMP280) += bmp280.o obj-$(CONFIG_BMP280) += bmp280.o
bmp280-objs := bmp280-core.o bmp280-regmap.o bmp280-objs := bmp280-core.o bmp280-regmap.o
obj-$(CONFIG_BMP280_I2C) += bmp280-i2c.o obj-$(CONFIG_BMP280_I2C) += bmp280-i2c.o
obj-$(CONFIG_BMP280_SPI) += bmp280-spi.o
obj-$(CONFIG_HID_SENSOR_PRESS) += hid-sensor-press.o obj-$(CONFIG_HID_SENSOR_PRESS) += hid-sensor-press.o
obj-$(CONFIG_HP03) += hp03.o obj-$(CONFIG_HP03) += hp03.o
obj-$(CONFIG_MPL115) += mpl115.o obj-$(CONFIG_MPL115) += mpl115.o
......
/* /*
* Copyright (c) 2010 Christoph Mair <christoph.mair@gmail.com>
* Copyright (c) 2012 Bosch Sensortec GmbH
* Copyright (c) 2012 Unixphere AB
* Copyright (c) 2014 Intel Corporation * Copyright (c) 2014 Intel Corporation
* Copyright (c) 2016 Linus Walleij <linus.walleij@linaro.org>
* *
* Driver for Bosch Sensortec BMP180 and BMP280 digital pressure sensor. * Driver for Bosch Sensortec BMP180 and BMP280 digital pressure sensor.
* *
......
/*
* SPI interface for the BMP280 driver
*
* Inspired by the older BMP085 driver drivers/misc/bmp085-spi.c
*/
#include <linux/module.h>
#include <linux/spi/spi.h>
#include <linux/err.h>
#include <linux/regmap.h>
#include "bmp280.h"
static int bmp280_regmap_spi_write(void *context, const void *data,
size_t count)
{
struct device *dev = context;
struct spi_device *spi = to_spi_device(dev);
u8 buf[2];
memcpy(buf, data, 2);
/*
* The SPI register address (= full register address without bit 7) and
* the write command (bit7 = RW = '0')
*/
buf[0] &= ~0x80;
return spi_write_then_read(spi, buf, 2, NULL, 0);
}
static int bmp280_regmap_spi_read(void *context, const void *reg,
size_t reg_size, void *val, size_t val_size)
{
struct device *dev = context;
struct spi_device *spi = to_spi_device(dev);
return spi_write_then_read(spi, reg, reg_size, val, val_size);
}
static struct regmap_bus bmp280_regmap_bus = {
.write = bmp280_regmap_spi_write,
.read = bmp280_regmap_spi_read,
.reg_format_endian_default = REGMAP_ENDIAN_BIG,
.val_format_endian_default = REGMAP_ENDIAN_BIG,
};
static int bmp280_spi_probe(struct spi_device *spi)
{
const struct spi_device_id *id = spi_get_device_id(spi);
struct regmap *regmap;
const struct regmap_config *regmap_config;
int ret;
spi->bits_per_word = 8;
ret = spi_setup(spi);
if (ret < 0) {
dev_err(&spi->dev, "spi_setup failed!\n");
return ret;
}
switch (id->driver_data) {
case BMP180_CHIP_ID:
regmap_config = &bmp180_regmap_config;
break;
case BMP280_CHIP_ID:
case BME280_CHIP_ID:
regmap_config = &bmp280_regmap_config;
break;
default:
return -EINVAL;
}
regmap = devm_regmap_init(&spi->dev,
&bmp280_regmap_bus,
&spi->dev,
regmap_config);
if (IS_ERR(regmap)) {
dev_err(&spi->dev, "failed to allocate register map\n");
return PTR_ERR(regmap);
}
return bmp280_common_probe(&spi->dev,
regmap,
id->driver_data,
id->name);
}
static int bmp280_spi_remove(struct spi_device *spi)
{
return bmp280_common_remove(&spi->dev);
}
static const struct of_device_id bmp280_of_spi_match[] = {
{ .compatible = "bosch,bmp085", },
{ .compatible = "bosch,bmp180", },
{ .compatible = "bosch,bmp181", },
{ .compatible = "bosch,bmp280", },
{ .compatible = "bosch,bme280", },
{ },
};
MODULE_DEVICE_TABLE(of, bmp280_of_spi_match);
static const struct spi_device_id bmp280_spi_id[] = {
{ "bmp180", BMP180_CHIP_ID },
{ "bmp181", BMP180_CHIP_ID },
{ "bmp280", BMP280_CHIP_ID },
{ "bme280", BME280_CHIP_ID },
{ }
};
MODULE_DEVICE_TABLE(spi, bmp280_spi_id);
static struct spi_driver bmp280_spi_driver = {
.driver = {
.name = "bmp280",
.of_match_table = bmp280_of_spi_match,
},
.id_table = bmp280_spi_id,
.probe = bmp280_spi_probe,
.remove = bmp280_spi_remove,
};
module_spi_driver(bmp280_spi_driver);
MODULE_DESCRIPTION("BMP280 SPI bus driver");
MODULE_LICENSE("GPL");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment