Commit b284fbe3 authored by Nobuhiro Iwamatsu's avatar Nobuhiro Iwamatsu Committed by David S. Miller

sh_eth: Fix access to TRSCER register

TRSCER register is configured differently by SoCs. TRSCER of R-Car Gen2 is
RINT8 bit only valid, other bits are reserved bits. This removes access to
TRSCER register reserve bit by adding variable trscer_err_mask to
sh_eth_cpu_data structure, set the register information to each SoCs.
Signed-off-by: default avatarNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent d407bc02
......@@ -538,6 +538,8 @@ static struct sh_eth_cpu_data sh7724_data = {
EESR_RDE | EESR_RFRMER | EESR_TFE | EESR_TDE |
EESR_ECI,
.trscer_err_mask = DESC_I_RINT8,
.apr = 1,
.mpr = 1,
.tpauser = 1,
......@@ -858,6 +860,9 @@ static void sh_eth_set_default_cpu_data(struct sh_eth_cpu_data *cd)
if (!cd->eesr_err_check)
cd->eesr_err_check = DEFAULT_EESR_ERR_CHECK;
if (!cd->trscer_err_mask)
cd->trscer_err_mask = DEFAULT_TRSCER_ERR_MASK;
}
static int sh_eth_check_reset(struct net_device *ndev)
......@@ -1296,7 +1301,7 @@ static int sh_eth_dev_init(struct net_device *ndev, bool start)
/* Frame recv control (enable multiple-packets per rx irq) */
sh_eth_write(ndev, RMCR_RNC, RMCR);
sh_eth_write(ndev, DESC_I_RINT8 | DESC_I_RINT5 | DESC_I_TINT2, TRSCER);
sh_eth_write(ndev, mdp->cd->trscer_err_mask, TRSCER);
if (mdp->cd->bculr)
sh_eth_write(ndev, 0x800, BCULR); /* Burst sycle set */
......
......@@ -369,6 +369,8 @@ enum DESC_I_BIT {
DESC_I_RINT1 = 0x0001,
};
#define DEFAULT_TRSCER_ERR_MASK (DESC_I_RINT8 | DESC_I_RINT5 | DESC_I_TINT2)
/* RPADIR */
enum RPADIR_BIT {
RPADIR_PADS1 = 0x20000, RPADIR_PADS0 = 0x10000,
......@@ -470,6 +472,9 @@ struct sh_eth_cpu_data {
unsigned long tx_check;
unsigned long eesr_err_check;
/* Error mask */
unsigned long trscer_err_mask;
/* hardware features */
unsigned long irq_flags; /* IRQ configuration flags */
unsigned no_psr:1; /* EtherC DO NOT have PSR */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment