Merge tag 'gpio-updates-for-v5.7-part1' of...

Merge tag 'gpio-updates-for-v5.7-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into devel

gpio updates for v5.7 part 1

- make irqs optional in gpio-pxa
- improve the logic behind the get() and set() callbacks in gpio-wcd934x
- add new kfifo helpers (acked by kfifo maintainer)
- rework the locking mechanism for lineevent kfifo
- implement a new ioctl() for watching changes on GPIO lines

drivers/gpio/gpio-pxa.c

@@ -652,8 +652,8 @@ static int pxa_gpio_probe(struct platform_device *pdev)
 	if (!pchip->irqdomain)
 		return -ENOMEM;
 
-	irq0 = platform_get_irq_byname(pdev, "gpio0");
-	irq1 = platform_get_irq_byname(pdev, "gpio1");
+	irq0 = platform_get_irq_byname_optional(pdev, "gpio0");
+	irq1 = platform_get_irq_byname_optional(pdev, "gpio1");
 	irq_mux = platform_get_irq_byname(pdev, "gpio_mux");
 	if ((irq0 > 0 && irq1 <= 0) || (irq0 <= 0 && irq1 > 0)
 		|| (irq_mux <= 0))

drivers/gpio/gpio-wcd934x.c

@@ -57,16 +57,19 @@ static int wcd_gpio_direction_output(struct gpio_chip *chip, unsigned int pin,
 static int wcd_gpio_get(struct gpio_chip *chip, unsigned int pin)
 {
 	struct wcd_gpio_data *data = gpiochip_get_data(chip);
-	int value;
+	unsigned int value;
 
 	regmap_read(data->map, WCD_REG_VAL_CTL_OFFSET, &value);
 
-	return !!(value && WCD_PIN_MASK(pin));
+	return !!(value & WCD_PIN_MASK(pin));
 }
 
 static void wcd_gpio_set(struct gpio_chip *chip, unsigned int pin, int val)
 {
-	wcd_gpio_direction_output(chip, pin, val);
+	struct wcd_gpio_data *data = gpiochip_get_data(chip);
+
+	regmap_update_bits(data->map, WCD_REG_VAL_CTL_OFFSET,
+			   WCD_PIN_MASK(pin), val ? WCD_PIN_MASK(pin) : 0);
 }
 
 static int wcd_gpio_probe(struct platform_device *pdev)

drivers/gpio/gpiolib.h

@@ -56,6 +56,7 @@ struct gpio_device {
 	const char		*label;
 	void			*data;
 	struct list_head        list;
+	struct atomic_notifier_head notifier;
 
 #ifdef CONFIG_PINCTRL
 	/*

include/linux/kfifo.h

@@ -246,6 +246,37 @@ __kfifo_int_must_check_helper(int val)
 	__tmpq->kfifo.in == __tmpq->kfifo.out; \
 })
 
+/**
+ * kfifo_is_empty_spinlocked - returns true if the fifo is empty using
+ * a spinlock for locking
+ * @fifo: address of the fifo to be used
+ * @lock: spinlock to be used for locking
+ */
+#define kfifo_is_empty_spinlocked(fifo, lock) \
+({ \
+	unsigned long __flags; \
+	bool __ret; \
+	spin_lock_irqsave(lock, __flags); \
+	__ret = kfifo_is_empty(fifo); \
+	spin_unlock_irqrestore(lock, __flags); \
+	__ret; \
+})
+
+/**
+ * kfifo_is_empty_spinlocked_noirqsave  - returns true if the fifo is empty
+ * using a spinlock for locking, doesn't disable interrupts
+ * @fifo: address of the fifo to be used
+ * @lock: spinlock to be used for locking
+ */
+#define kfifo_is_empty_spinlocked_noirqsave(fifo, lock) \
+({ \
+	bool __ret; \
+	spin_lock(lock); \
+	__ret = kfifo_is_empty(fifo); \
+	spin_unlock(lock); \
+	__ret; \
+})
+
 /**
  * kfifo_is_full - returns true if the fifo is full
  * @fifo: address of the fifo to be used
@@ -517,6 +548,26 @@ __kfifo_uint_must_check_helper( \
 	__ret; \
 })
 
+/**
+ * kfifo_in_spinlocked_noirqsave - put data into fifo using a spinlock for
+ * locking, don't disable interrupts
+ * @fifo: address of the fifo to be used
+ * @buf: the data to be added
+ * @n: number of elements to be added
+ * @lock: pointer to the spinlock to use for locking
+ *
+ * This is a variant of kfifo_in_spinlocked() but uses spin_lock/unlock()
+ * for locking and doesn't disable interrupts.
+ */
+#define kfifo_in_spinlocked_noirqsave(fifo, buf, n, lock) \
+({ \
+	unsigned int __ret; \
+	spin_lock(lock); \
+	__ret = kfifo_in(fifo, buf, n); \
+	spin_unlock(lock); \
+	__ret; \
+})
+
 /* alias for kfifo_in_spinlocked, will be removed in a future release */
 #define kfifo_in_locked(fifo, buf, n, lock) \
 		kfifo_in_spinlocked(fifo, buf, n, lock)
@@ -569,6 +620,28 @@ __kfifo_uint_must_check_helper( \
 }) \
 )
 
+/**
+ * kfifo_out_spinlocked_noirqsave - get data from the fifo using a spinlock
+ * for locking, don't disable interrupts
+ * @fifo: address of the fifo to be used
+ * @buf: pointer to the storage buffer
+ * @n: max. number of elements to get
+ * @lock: pointer to the spinlock to use for locking
+ *
+ * This is a variant of kfifo_out_spinlocked() which uses spin_lock/unlock()
+ * for locking and doesn't disable interrupts.
+ */
+#define kfifo_out_spinlocked_noirqsave(fifo, buf, n, lock) \
+__kfifo_uint_must_check_helper( \
+({ \
+	unsigned int __ret; \
+	spin_lock(lock); \
+	__ret = kfifo_out(fifo, buf, n); \
+	spin_unlock(lock); \
+	__ret; \
+}) \
+)
+
 /* alias for kfifo_out_spinlocked, will be removed in a future release */
 #define kfifo_out_locked(fifo, buf, n, lock) \
 		kfifo_out_spinlocked(fifo, buf, n, lock)

include/uapi/linux/gpio.h

@@ -59,6 +59,34 @@ struct gpioline_info {
 /* Maximum number of requested handles */
 #define GPIOHANDLES_MAX 64
 
+/* Possible line status change events */
+enum {
+	GPIOLINE_CHANGED_REQUESTED = 1,
+	GPIOLINE_CHANGED_RELEASED,
+	GPIOLINE_CHANGED_CONFIG,
+};
+
+/**
+ * struct gpioline_info_changed - Information about a change in status
+ * of a GPIO line
+ * @info: updated line information
+ * @timestamp: estimate of time of status change occurrence, in nanoseconds
+ * and GPIOLINE_CHANGED_CONFIG
+ * @event_type: one of GPIOLINE_CHANGED_REQUESTED, GPIOLINE_CHANGED_RELEASED
+ *
+ * Note: struct gpioline_info embedded here has 32-bit alignment on its own,
+ * but it works fine with 64-bit alignment too. With its 72 byte size, we can
+ * guarantee there are no implicit holes between it and subsequent members.
+ * The 20-byte padding at the end makes sure we don't add any implicit padding
+ * at the end of the structure on 64-bit architectures.
+ */
+struct gpioline_info_changed {
+	struct gpioline_info info;
+	__u64 timestamp;
+	__u32 event_type;
+	__u32 padding[5]; /* for future use */
+};
+
 /* Linerequest flags */
 #define GPIOHANDLE_REQUEST_INPUT	(1UL << 0)
 #define GPIOHANDLE_REQUEST_OUTPUT	(1UL << 1)
@@ -176,6 +204,8 @@ struct gpioevent_data {
 
 #define GPIO_GET_CHIPINFO_IOCTL _IOR(0xB4, 0x01, struct gpiochip_info)
 #define GPIO_GET_LINEINFO_IOCTL _IOWR(0xB4, 0x02, struct gpioline_info)
+#define GPIO_GET_LINEINFO_WATCH_IOCTL _IOWR(0xB4, 0x0b, struct gpioline_info)
+#define GPIO_GET_LINEINFO_UNWATCH_IOCTL _IOWR(0xB4, 0x0c, __u32)
 #define GPIO_GET_LINEHANDLE_IOCTL _IOWR(0xB4, 0x03, struct gpiohandle_request)
 #define GPIO_GET_LINEEVENT_IOCTL _IOWR(0xB4, 0x04, struct gpioevent_request)
 

tools/gpio/.gitignore

 gpio-event-mon
 gpio-hammer
+gpio-watch
 lsgpio
 include/linux/gpio.h

tools/gpio/Build

@@ -2,3 +2,4 @@ gpio-utils-y += gpio-utils.o
 lsgpio-y += lsgpio.o gpio-utils.o
 gpio-hammer-y += gpio-hammer.o gpio-utils.o
 gpio-event-mon-y += gpio-event-mon.o gpio-utils.o
+gpio-watch-y += gpio-watch.o

tools/gpio/Makefile

@@ -18,7 +18,7 @@ MAKEFLAGS += -r
 
 override CFLAGS += -O2 -Wall -g -D_GNU_SOURCE -I$(OUTPUT)include
 
-ALL_TARGETS := lsgpio gpio-hammer gpio-event-mon
+ALL_TARGETS := lsgpio gpio-hammer gpio-event-mon gpio-watch
 ALL_PROGRAMS := $(patsubst %,$(OUTPUT)%,$(ALL_TARGETS))
 
 all: $(ALL_PROGRAMS)
@@ -66,6 +66,15 @@ $(GPIO_EVENT_MON_IN): prepare FORCE $(OUTPUT)gpio-utils-in.o
 $(OUTPUT)gpio-event-mon: $(GPIO_EVENT_MON_IN)
 	$(QUIET_LINK)$(CC) $(CFLAGS) $(LDFLAGS) $< -o $@
 
+#
+# gpio-watch
+#
+GPIO_WATCH_IN := $(OUTPUT)gpio-watch-in.o
+$(GPIO_WATCH_IN): prepare FORCE
+	$(Q)$(MAKE) $(build)=gpio-watch
+$(OUTPUT)gpio-watch: $(GPIO_WATCH_IN)
+	$(QUIET_LINK)$(CC) $(CFLAGS) $(LDFLAGS) $< -o $@
+
 clean:
 	rm -f $(ALL_PROGRAMS)
 	rm -f $(OUTPUT)include/linux/gpio.h

tools/gpio/gpio-watch.c

+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * gpio-watch - monitor unrequested lines for property changes using the
+ *              character device
+ *
+ * Copyright (C) 2019 BayLibre SAS
+ * Author: Bartosz Golaszewski <bgolaszewski@baylibre.com>
+ */
+
+#include <ctype.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <linux/gpio.h>
+#include <poll.h>
+#include <stdbool.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/ioctl.h>
+#include <unistd.h>
+
+int main(int argc, char **argv)
+{
+	struct gpioline_info_changed chg;
+	struct gpioline_info req;
+	struct pollfd pfd;
+	int fd, i, j, ret;
+	char *event, *end;
+	ssize_t rd;
+
+	if (argc < 3)
+		goto err_usage;
+
+	fd = open(argv[1], O_RDWR | O_CLOEXEC);
+	if (fd < 0) {
+		perror("unable to open gpiochip");
+		return EXIT_FAILURE;
+	}
+
+	for (i = 0, j = 2; i < argc - 2; i++, j++) {
+		memset(&req, 0, sizeof(req));
+
+		req.line_offset = strtoul(argv[j], &end, 0);
+		if (*end != '\0')
+			goto err_usage;
+
+		ret = ioctl(fd, GPIO_GET_LINEINFO_WATCH_IOCTL, &req);
+		if (ret) {
+			perror("unable to set up line watch");
+			return EXIT_FAILURE;
+		}
+	}
+
+	pfd.fd = fd;
+	pfd.events = POLLIN | POLLPRI;
+
+	for (;;) {
+		ret = poll(&pfd, 1, 5000);
+		if (ret < 0) {
+			perror("error polling the linechanged fd");
+			return EXIT_FAILURE;
+		} else if (ret > 0) {
+			memset(&chg, 0, sizeof(chg));
+			rd = read(pfd.fd, &chg, sizeof(chg));
+			if (rd < 0 || rd != sizeof(chg)) {
+				if (rd != sizeof(chg))
+					errno = EIO;
+
+				perror("error reading line change event");
+				return EXIT_FAILURE;
+			}
+
+			switch (chg.event_type) {
+			case GPIOLINE_CHANGED_REQUESTED:
+				event = "requested";
+				break;
+			case GPIOLINE_CHANGED_RELEASED:
+				event = "released";
+				break;
+			case GPIOLINE_CHANGED_CONFIG:
+				event = "config changed";
+				break;
+			default:
+				fprintf(stderr,
+					"invalid event type received from the kernel\n");
+				return EXIT_FAILURE;
+			}
+
+			printf("line %u: %s at %llu\n",
+			       chg.info.line_offset, event, chg.timestamp);
+		}
+	}
+
+	return 0;
+
+err_usage:
+	printf("%s: <gpiochip> <line0> <line1> ...\n", argv[0]);
+	return EXIT_FAILURE;
+}