i2c: ocores: support big-endian register layout

This allows using OpenCores I2C controller attached to its host in
native-endian mode with bi-endian CPUs. Example of such system is Xtensa
XTFPGA platform.
Acked-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

drivers/i2c/busses/i2c-ocores.c

@@ -92,6 +92,16 @@ static void oc_setreg_32(struct ocores_i2c *i2c, int reg, u8 value)
 	iowrite32(value, i2c->base + (reg << i2c->reg_shift));
 }
 
+static void oc_setreg_16be(struct ocores_i2c *i2c, int reg, u8 value)
+{
+	iowrite16be(value, i2c->base + (reg << i2c->reg_shift));
+}
+
+static void oc_setreg_32be(struct ocores_i2c *i2c, int reg, u8 value)
+{
+	iowrite32be(value, i2c->base + (reg << i2c->reg_shift));
+}
+
 static inline u8 oc_getreg_8(struct ocores_i2c *i2c, int reg)
 {
 	return ioread8(i2c->base + (reg << i2c->reg_shift));
@@ -107,6 +117,16 @@ static inline u8 oc_getreg_32(struct ocores_i2c *i2c, int reg)
 	return ioread32(i2c->base + (reg << i2c->reg_shift));
 }
 
+static inline u8 oc_getreg_16be(struct ocores_i2c *i2c, int reg)
+{
+	return ioread16be(i2c->base + (reg << i2c->reg_shift));
+}
+
+static inline u8 oc_getreg_32be(struct ocores_i2c *i2c, int reg)
+{
+	return ioread32be(i2c->base + (reg << i2c->reg_shift));
+}
+
 static inline void oc_setreg(struct ocores_i2c *i2c, int reg, u8 value)
 {
 	i2c->setreg(i2c, reg, value);
@@ -428,6 +448,9 @@ static int ocores_i2c_probe(struct platform_device *pdev)
 		i2c->reg_io_width = 1; /* Set to default value */
 
 	if (!i2c->setreg || !i2c->getreg) {
+		bool be = pdata ? pdata->big_endian :
+			of_device_is_big_endian(pdev->dev.of_node);
+
 		switch (i2c->reg_io_width) {
 		case 1:
 			i2c->setreg = oc_setreg_8;
@@ -435,13 +458,13 @@ static int ocores_i2c_probe(struct platform_device *pdev)
 			break;
 
 		case 2:
-			i2c->setreg = oc_setreg_16;
-			i2c->getreg = oc_getreg_16;
+			i2c->setreg = be ? oc_setreg_16be : oc_setreg_16;
+			i2c->getreg = be ? oc_getreg_16be : oc_getreg_16;
 			break;
 
 		case 4:
-			i2c->setreg = oc_setreg_32;
-			i2c->getreg = oc_getreg_32;
+			i2c->setreg = be ? oc_setreg_32be : oc_setreg_32;
+			i2c->getreg = be ? oc_getreg_32be : oc_getreg_32;
 			break;
 
 		default:

include/linux/i2c-ocores.h

@@ -15,6 +15,7 @@ struct ocores_i2c_platform_data {
 	u32 reg_shift; /* register offset shift value */
 	u32 reg_io_width; /* register io read/write width */
 	u32 clock_khz; /* input clock in kHz */
+	bool big_endian; /* registers are big endian */
 	u8 num_devices; /* number of devices in the devices list */
 	struct i2c_board_info const *devices; /* devices connected to the bus */
 };