Commit b2f47377 authored by hayeswang's avatar hayeswang Committed by David S. Miller

net/usb/r815x: replace USB buffer from stack to DMA-able

Some USB buffers use stack which may not be DMA-able.
Use the buffers from kmalloc to replace those one.
Signed-off-by: default avatarHayes Wang <hayeswang@realtek.com>
Acked-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 06693f30
...@@ -24,34 +24,43 @@ ...@@ -24,34 +24,43 @@
static int pla_read_word(struct usb_device *udev, u16 index) static int pla_read_word(struct usb_device *udev, u16 index)
{ {
int data, ret; int ret;
u8 shift = index & 2; u8 shift = index & 2;
__le32 ocp_data; __le32 *tmp;
tmp = kmalloc(sizeof(*tmp), GFP_KERNEL);
if (!tmp)
return -ENOMEM;
index &= ~3; index &= ~3;
ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
RTL815x_REQ_GET_REGS, RTL815x_REQT_READ, RTL815x_REQ_GET_REGS, RTL815x_REQT_READ,
index, MCU_TYPE_PLA, &ocp_data, sizeof(ocp_data), index, MCU_TYPE_PLA, tmp, sizeof(*tmp), 500);
500);
if (ret < 0) if (ret < 0)
return ret; goto out2;
data = __le32_to_cpu(ocp_data); ret = __le32_to_cpu(*tmp);
data >>= (shift * 8); ret >>= (shift * 8);
data &= 0xffff; ret &= 0xffff;
return data; out2:
kfree(tmp);
return ret;
} }
static int pla_write_word(struct usb_device *udev, u16 index, u32 data) static int pla_write_word(struct usb_device *udev, u16 index, u32 data)
{ {
__le32 ocp_data; __le32 *tmp;
u32 mask = 0xffff; u32 mask = 0xffff;
u16 byen = BYTE_EN_WORD; u16 byen = BYTE_EN_WORD;
u8 shift = index & 2; u8 shift = index & 2;
int ret; int ret;
tmp = kmalloc(sizeof(*tmp), GFP_KERNEL);
if (!tmp)
return -ENOMEM;
data &= mask; data &= mask;
if (shift) { if (shift) {
...@@ -63,19 +72,20 @@ static int pla_write_word(struct usb_device *udev, u16 index, u32 data) ...@@ -63,19 +72,20 @@ static int pla_write_word(struct usb_device *udev, u16 index, u32 data)
ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
RTL815x_REQ_GET_REGS, RTL815x_REQT_READ, RTL815x_REQ_GET_REGS, RTL815x_REQT_READ,
index, MCU_TYPE_PLA, &ocp_data, sizeof(ocp_data), index, MCU_TYPE_PLA, tmp, sizeof(*tmp), 500);
500);
if (ret < 0) if (ret < 0)
return ret; goto out3;
data |= __le32_to_cpu(ocp_data) & ~mask; data |= __le32_to_cpu(*tmp) & ~mask;
ocp_data = __cpu_to_le32(data); *tmp = __cpu_to_le32(data);
ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
RTL815x_REQ_SET_REGS, RTL815x_REQT_WRITE, RTL815x_REQ_SET_REGS, RTL815x_REQT_WRITE,
index, MCU_TYPE_PLA | byen, &ocp_data, index, MCU_TYPE_PLA | byen, tmp, sizeof(*tmp),
sizeof(ocp_data), 500); 500);
out3:
kfree(tmp);
return ret; return ret;
} }
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment