net: hns3: bugfix for the initialization of command queue's spin lock

The spin lock of the command queue only need to be initialized once
when the driver initializes the command queue. It is not necessary to
initialize the spin lock when resetting. At the same time, the
modification of the queue member should be performed after acquiring
the lock.

Fixes: 3efb960f ("net: hns3: Refactor the initialization of command queue")
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.c

@@ -304,6 +304,10 @@ int hclge_cmd_queue_init(struct hclge_dev *hdev)
 {
 	int ret;
 
+	/* Setup the lock for command queue */
+	spin_lock_init(&hdev->hw.cmq.csq.lock);
+	spin_lock_init(&hdev->hw.cmq.crq.lock);
+
 	/* Setup the queue entries for use cmd queue */
 	hdev->hw.cmq.csq.desc_num = HCLGE_NIC_CMQ_DESC_NUM;
 	hdev->hw.cmq.crq.desc_num = HCLGE_NIC_CMQ_DESC_NUM;
@@ -337,18 +341,20 @@ int hclge_cmd_init(struct hclge_dev *hdev)
 	u32 version;
 	int ret;
 
+	spin_lock_bh(&hdev->hw.cmq.csq.lock);
+	spin_lock_bh(&hdev->hw.cmq.crq.lock);
+
 	hdev->hw.cmq.csq.next_to_clean = 0;
 	hdev->hw.cmq.csq.next_to_use = 0;
 	hdev->hw.cmq.crq.next_to_clean = 0;
 	hdev->hw.cmq.crq.next_to_use = 0;
 
-	/* Setup the lock for command queue */
-	spin_lock_init(&hdev->hw.cmq.csq.lock);
-	spin_lock_init(&hdev->hw.cmq.crq.lock);
-
 	hclge_cmd_init_regs(&hdev->hw);
 	clear_bit(HCLGE_STATE_CMD_DISABLE, &hdev->state);
 
+	spin_unlock_bh(&hdev->hw.cmq.crq.lock);
+	spin_unlock_bh(&hdev->hw.cmq.csq.lock);
+
 	ret = hclge_cmd_query_firmware_version(&hdev->hw, &version);
 	if (ret) {
 		dev_err(&hdev->pdev->dev,