Merge remote-tracking branch 'gpio/ib-omap' into omap-for-v4.21/dt-ti-sysc

arch/arm/mach-omap2/pm24xx.c

@@ -18,6 +18,7 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/cpu_pm.h>
 #include <linux/suspend.h>
 #include <linux/sched.h>
 #include <linux/proc_fs.h>
@@ -29,8 +30,6 @@
 #include <linux/clk-provider.h>
 #include <linux/irq.h>
 #include <linux/time.h>
-#include <linux/gpio.h>
-#include <linux/platform_data/gpio-omap.h>
 
 #include <asm/fncpy.h>
 
@@ -87,7 +86,7 @@ static int omap2_enter_full_retention(void)
 	l = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0) | OMAP24XX_USBSTANDBYCTRL;
 	omap_ctrl_writel(l, OMAP2_CONTROL_DEVCONF0);
 
-	omap2_gpio_prepare_for_idle(0);
+	cpu_cluster_pm_enter();
 
 	/* One last check for pending IRQs to avoid extra latency due
 	 * to sleeping unnecessarily. */
@@ -100,7 +99,7 @@ static int omap2_enter_full_retention(void)
 			   OMAP_SDRC_REGADDR(SDRC_POWER));
 
 no_sleep:
-	omap2_gpio_resume_after_idle();
+	cpu_cluster_pm_exit();
 
 	clk_enable(osc_ck);
 

arch/arm/mach-omap2/pm34xx.c

@@ -18,19 +18,18 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/cpu_pm.h>
 #include <linux/pm.h>
 #include <linux/suspend.h>
 #include <linux/interrupt.h>
 #include <linux/module.h>
 #include <linux/list.h>
 #include <linux/err.h>
-#include <linux/gpio.h>
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
 #include <linux/omap-dma.h>
 #include <linux/omap-gpmc.h>
-#include <linux/platform_data/gpio-omap.h>
 
 #include <trace/events/power.h>
 
@@ -197,7 +196,6 @@ void omap_sram_idle(void)
 	int mpu_next_state = PWRDM_POWER_ON;
 	int per_next_state = PWRDM_POWER_ON;
 	int core_next_state = PWRDM_POWER_ON;
-	int per_going_off;
 	u32 sdrc_pwr = 0;
 
 	mpu_next_state = pwrdm_read_next_pwrst(mpu_pwrdm);
@@ -227,10 +225,8 @@ void omap_sram_idle(void)
 	pwrdm_pre_transition(NULL);
 
 	/* PER */
-	if (per_next_state < PWRDM_POWER_ON) {
-		per_going_off = (per_next_state == PWRDM_POWER_OFF) ? 1 : 0;
-		omap2_gpio_prepare_for_idle(per_going_off);
-	}
+	if (per_next_state == PWRDM_POWER_OFF)
+		cpu_cluster_pm_enter();
 
 	/* CORE */
 	if (core_next_state < PWRDM_POWER_ON) {
@@ -295,8 +291,8 @@ void omap_sram_idle(void)
 	pwrdm_post_transition(NULL);
 
 	/* PER */
-	if (per_next_state < PWRDM_POWER_ON)
-		omap2_gpio_resume_after_idle();
+	if (per_next_state == PWRDM_POWER_OFF)
+		cpu_cluster_pm_exit();
 }
 
 static void omap3_pm_idle(void)

include/linux/platform_data/gpio-omap.h

@@ -197,23 +197,12 @@ struct omap_gpio_platform_data {
 	bool is_mpuio;		/* whether the bank is of type MPUIO */
 	u32 non_wakeup_gpios;
 
+	u32 quirks;		/* Version specific quirks mask */
+
 	struct omap_gpio_reg_offs *regs;
 
 	/* Return context loss count due to PM states changing */
 	int (*get_context_loss_count)(struct device *dev);
 };
 
-#if IS_BUILTIN(CONFIG_GPIO_OMAP)
-extern void omap2_gpio_prepare_for_idle(int off_mode);
-extern void omap2_gpio_resume_after_idle(void);
-#else
-static inline void omap2_gpio_prepare_for_idle(int off_mode)
-{
-}
-
-static inline void omap2_gpio_resume_after_idle(void)
-{
-}
-#endif
-
 #endif