Commit b37b62fe authored by Ben Hutchings's avatar Ben Hutchings Committed by David S. Miller

sfc: Rename 'xfp' file and functions to reflect reality

The 'XFP' driver is really a driver for the QT2022C2 and QT2025C PHYs,
covering both more and less than XFP.  Rename its functions and
constants to reflect reality and to reduce namespace pollution when
sfc is a built-in driver.
Signed-off-by: default avatarBen Hutchings <bhutchings@solarflare.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent fc2b5e67
sfc-y += efx.o falcon.o tx.o rx.o falcon_gmac.o \
falcon_xmac.o selftest.o ethtool.o xfp_phy.o \
falcon_xmac.o selftest.o ethtool.o qt202x_phy.o \
mdio_10g.o tenxpress.o falcon_boards.o
sfc-$(CONFIG_SFC_MTD) += mtd.o
......
......@@ -2239,7 +2239,7 @@ int falcon_probe_port(struct efx_nic *efx)
break;
case PHY_TYPE_QT2022C2:
case PHY_TYPE_QT2025C:
efx->phy_op = &falcon_xfp_phy_ops;
efx->phy_op = &falcon_qt202x_phy_ops;
break;
default:
EFX_ERR(efx, "Unknown PHY type %d\n",
......
......@@ -612,17 +612,17 @@ static void sfe4002_init_leds(struct efx_nic *efx)
{
/* Set the TX and RX LEDs to reflect status and activity, and the
* fault LED off */
xfp_set_led(efx, SFE4002_TX_LED,
QUAKE_LED_TXLINK | QUAKE_LED_LINK_ACTSTAT);
xfp_set_led(efx, SFE4002_RX_LED,
QUAKE_LED_RXLINK | QUAKE_LED_LINK_ACTSTAT);
xfp_set_led(efx, SFE4002_FAULT_LED, QUAKE_LED_OFF);
falcon_qt202x_set_led(efx, SFE4002_TX_LED,
QUAKE_LED_TXLINK | QUAKE_LED_LINK_ACTSTAT);
falcon_qt202x_set_led(efx, SFE4002_RX_LED,
QUAKE_LED_RXLINK | QUAKE_LED_LINK_ACTSTAT);
falcon_qt202x_set_led(efx, SFE4002_FAULT_LED, QUAKE_LED_OFF);
}
static void sfe4002_set_id_led(struct efx_nic *efx, bool state)
{
xfp_set_led(efx, SFE4002_FAULT_LED, state ? QUAKE_LED_ON :
QUAKE_LED_OFF);
falcon_qt202x_set_led(efx, SFE4002_FAULT_LED, state ? QUAKE_LED_ON :
QUAKE_LED_OFF);
}
static int sfe4002_check_hw(struct efx_nic *efx)
......@@ -677,16 +677,16 @@ static struct i2c_board_info sfn4112f_hwmon_info = {
static void sfn4112f_init_leds(struct efx_nic *efx)
{
xfp_set_led(efx, SFN4112F_ACT_LED,
QUAKE_LED_RXLINK | QUAKE_LED_LINK_ACT);
xfp_set_led(efx, SFN4112F_LINK_LED,
QUAKE_LED_RXLINK | QUAKE_LED_LINK_STAT);
falcon_qt202x_set_led(efx, SFN4112F_ACT_LED,
QUAKE_LED_RXLINK | QUAKE_LED_LINK_ACT);
falcon_qt202x_set_led(efx, SFN4112F_LINK_LED,
QUAKE_LED_RXLINK | QUAKE_LED_LINK_STAT);
}
static void sfn4112f_set_id_led(struct efx_nic *efx, bool state)
{
xfp_set_led(efx, SFN4112F_LINK_LED,
state ? QUAKE_LED_ON : QUAKE_LED_OFF);
falcon_qt202x_set_led(efx, SFN4112F_LINK_LED,
state ? QUAKE_LED_ON : QUAKE_LED_OFF);
}
static int sfn4112f_check_hw(struct efx_nic *efx)
......
......@@ -23,9 +23,9 @@ extern void tenxpress_phy_blink(struct efx_nic *efx, bool blink);
extern int sft9001_wait_boot(struct efx_nic *efx);
/****************************************************************************
* AMCC/Quake QT20xx PHYs
* AMCC/Quake QT202x PHYs
*/
extern struct efx_phy_operations falcon_xfp_phy_ops;
extern struct efx_phy_operations falcon_qt202x_phy_ops;
/* These PHYs provide various H/W control states for LEDs */
#define QUAKE_LED_LINK_INVAL (0)
......@@ -39,6 +39,6 @@ extern struct efx_phy_operations falcon_xfp_phy_ops;
#define QUAKE_LED_TXLINK (0)
#define QUAKE_LED_RXLINK (8)
extern void xfp_set_led(struct efx_nic *p, int led, int state);
extern void falcon_qt202x_set_led(struct efx_nic *p, int led, int state);
#endif
......@@ -7,8 +7,7 @@
* by the Free Software Foundation, incorporated herein by reference.
*/
/*
* Driver for SFP+ and XFP optical PHYs plus some support specific to the
* AMCC QT20xx adapters; see www.amcc.com for details
* Driver for AMCC QT202x SFP+ and XFP adapters; see www.amcc.com for details
*/
#include <linux/timer.h>
......@@ -18,13 +17,13 @@
#include "phy.h"
#include "falcon.h"
#define XFP_REQUIRED_DEVS (MDIO_DEVS_PCS | \
MDIO_DEVS_PMAPMD | \
MDIO_DEVS_PHYXS)
#define QT202X_REQUIRED_DEVS (MDIO_DEVS_PCS | \
MDIO_DEVS_PMAPMD | \
MDIO_DEVS_PHYXS)
#define XFP_LOOPBACKS ((1 << LOOPBACK_PCS) | \
(1 << LOOPBACK_PMAPMD) | \
(1 << LOOPBACK_NETWORK))
#define QT202X_LOOPBACKS ((1 << LOOPBACK_PCS) | \
(1 << LOOPBACK_PMAPMD) | \
(1 << LOOPBACK_NETWORK))
/****************************************************************************/
/* Quake-specific MDIO registers */
......@@ -45,18 +44,18 @@
#define PCS_VEND1_REG 0xc000
#define PCS_VEND1_LBTXD_LBN 5
void xfp_set_led(struct efx_nic *p, int led, int mode)
void falcon_qt202x_set_led(struct efx_nic *p, int led, int mode)
{
int addr = MDIO_QUAKE_LED0_REG + led;
efx_mdio_write(p, MDIO_MMD_PMAPMD, addr, mode);
}
struct xfp_phy_data {
struct qt202x_phy_data {
enum efx_phy_mode phy_mode;
};
#define XFP_MAX_RESET_TIME 500
#define XFP_RESET_WAIT 10
#define QT2022C2_MAX_RESET_TIME 500
#define QT2022C2_RESET_WAIT 10
static int qt2025c_wait_reset(struct efx_nic *efx)
{
......@@ -97,7 +96,7 @@ static int qt2025c_wait_reset(struct efx_nic *efx)
return 0;
}
static int xfp_reset_phy(struct efx_nic *efx)
static int qt202x_reset_phy(struct efx_nic *efx)
{
int rc;
......@@ -111,8 +110,9 @@ static int xfp_reset_phy(struct efx_nic *efx)
/* Reset the PHYXS MMD. This is documented as doing
* a complete soft reset. */
rc = efx_mdio_reset_mmd(efx, MDIO_MMD_PHYXS,
XFP_MAX_RESET_TIME / XFP_RESET_WAIT,
XFP_RESET_WAIT);
QT2022C2_MAX_RESET_TIME /
QT2022C2_RESET_WAIT,
QT2022C2_RESET_WAIT);
if (rc < 0)
goto fail;
}
......@@ -122,7 +122,7 @@ static int xfp_reset_phy(struct efx_nic *efx)
/* Check that all the MMDs we expect are present and responding. We
* expect faults on some if the link is down, but not on the PHY XS */
rc = efx_mdio_check_mmds(efx, XFP_REQUIRED_DEVS, MDIO_DEVS_PHYXS);
rc = efx_mdio_check_mmds(efx, QT202X_REQUIRED_DEVS, MDIO_DEVS_PHYXS);
if (rc < 0)
goto fail;
......@@ -135,13 +135,13 @@ static int xfp_reset_phy(struct efx_nic *efx)
return rc;
}
static int xfp_phy_init(struct efx_nic *efx)
static int qt202x_phy_init(struct efx_nic *efx)
{
struct xfp_phy_data *phy_data;
struct qt202x_phy_data *phy_data;
u32 devid = efx_mdio_read_id(efx, MDIO_MMD_PHYXS);
int rc;
phy_data = kzalloc(sizeof(struct xfp_phy_data), GFP_KERNEL);
phy_data = kzalloc(sizeof(struct qt202x_phy_data), GFP_KERNEL);
if (!phy_data)
return -ENOMEM;
efx->phy_data = phy_data;
......@@ -152,7 +152,7 @@ static int xfp_phy_init(struct efx_nic *efx)
phy_data->phy_mode = efx->phy_mode;
rc = xfp_reset_phy(efx);
rc = qt202x_reset_phy(efx);
EFX_INFO(efx, "PHY init %s.\n",
rc ? "failed" : "successful");
......@@ -167,28 +167,28 @@ static int xfp_phy_init(struct efx_nic *efx)
return rc;
}
static void xfp_phy_clear_interrupt(struct efx_nic *efx)
static void qt202x_phy_clear_interrupt(struct efx_nic *efx)
{
/* Read to clear link status alarm */
efx_mdio_read(efx, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_STAT);
}
static int xfp_link_ok(struct efx_nic *efx)
static int qt202x_link_ok(struct efx_nic *efx)
{
return efx_mdio_links_ok(efx, XFP_REQUIRED_DEVS);
return efx_mdio_links_ok(efx, QT202X_REQUIRED_DEVS);
}
static void xfp_phy_poll(struct efx_nic *efx)
static void qt202x_phy_poll(struct efx_nic *efx)
{
int link_up = xfp_link_ok(efx);
int link_up = qt202x_link_ok(efx);
/* Simulate a PHY event if link state has changed */
if (link_up != efx->link_up)
falcon_sim_phy_event(efx);
}
static void xfp_phy_reconfigure(struct efx_nic *efx)
static void qt202x_phy_reconfigure(struct efx_nic *efx)
{
struct xfp_phy_data *phy_data = efx->phy_data;
struct qt202x_phy_data *phy_data = efx->phy_data;
if (efx->phy_type == PHY_TYPE_QT2025C) {
/* There are several different register bits which can
......@@ -207,7 +207,7 @@ static void xfp_phy_reconfigure(struct efx_nic *efx)
/* Reset the PHY when moving from tx off to tx on */
if (!(efx->phy_mode & PHY_MODE_TX_DISABLED) &&
(phy_data->phy_mode & PHY_MODE_TX_DISABLED))
xfp_reset_phy(efx);
qt202x_reset_phy(efx);
efx_mdio_transmit_disable(efx);
}
......@@ -215,18 +215,18 @@ static void xfp_phy_reconfigure(struct efx_nic *efx)
efx_mdio_phy_reconfigure(efx);
phy_data->phy_mode = efx->phy_mode;
efx->link_up = xfp_link_ok(efx);
efx->link_up = qt202x_link_ok(efx);
efx->link_speed = 10000;
efx->link_fd = true;
efx->link_fc = efx->wanted_fc;
}
static void xfp_phy_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd)
static void qt202x_phy_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd)
{
mdio45_ethtool_gset(&efx->mdio, ecmd);
}
static void xfp_phy_fini(struct efx_nic *efx)
static void qt202x_phy_fini(struct efx_nic *efx)
{
/* Clobber the LED if it was blinking */
efx->board_info.blink(efx, false);
......@@ -236,15 +236,15 @@ static void xfp_phy_fini(struct efx_nic *efx)
efx->phy_data = NULL;
}
struct efx_phy_operations falcon_xfp_phy_ops = {
struct efx_phy_operations falcon_qt202x_phy_ops = {
.macs = EFX_XMAC,
.init = xfp_phy_init,
.reconfigure = xfp_phy_reconfigure,
.poll = xfp_phy_poll,
.fini = xfp_phy_fini,
.clear_interrupt = xfp_phy_clear_interrupt,
.get_settings = xfp_phy_get_settings,
.init = qt202x_phy_init,
.reconfigure = qt202x_phy_reconfigure,
.poll = qt202x_phy_poll,
.fini = qt202x_phy_fini,
.clear_interrupt = qt202x_phy_clear_interrupt,
.get_settings = qt202x_phy_get_settings,
.set_settings = efx_mdio_set_settings,
.mmds = XFP_REQUIRED_DEVS,
.loopbacks = XFP_LOOPBACKS,
.mmds = QT202X_REQUIRED_DEVS,
.loopbacks = QT202X_LOOPBACKS,
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment