Commit b3950e6a authored by Luis R. Rodriguez's avatar Luis R. Rodriguez Committed by John W. Linville

ath9k_hw: split the generic hardware code by hardware family

Move out the generic hardware family code out into their own
files, we have one for AR5008, AR9001, and AR9002 family (ar9002_hw.c)
and another file for the new AR9003 hardware family (ar9003_hw.c).
Signed-off-by: default avatarLuis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 204729fd
......@@ -13,7 +13,10 @@ ath9k-$(CONFIG_ATH9K_DEBUGFS) += debug.o
obj-$(CONFIG_ATH9K) += ath9k.o
ath9k_hw-y:= hw.o \
ath9k_hw-y:= \
ar9002_hw.o \
ar9003_hw.o \
hw.o \
ar9003_phy.o \
ar9002_phy.o \
ar5008_phy.o \
......
This diff is collapsed.
/*
* Copyright (c) 2008-2010 Atheros Communications Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#include "hw.h"
#include "ar9003_initvals.h"
/* General hardware code for the AR9003 hadware family */
static bool ar9003_hw_macversion_supported(u32 macversion)
{
switch (macversion) {
case AR_SREV_VERSION_9300:
return true;
default:
break;
}
return false;
}
/* AR9003 2.0 - new INI format (pre, core, post arrays per subsystem) */
static void ar9003_hw_init_mode_regs(struct ath_hw *ah)
{
/* mac */
INIT_INI_ARRAY(&ah->iniMac[ATH_INI_PRE], NULL, 0, 0);
INIT_INI_ARRAY(&ah->iniMac[ATH_INI_CORE],
ar9300_2p0_mac_core,
ARRAY_SIZE(ar9300_2p0_mac_core), 2);
INIT_INI_ARRAY(&ah->iniMac[ATH_INI_POST],
ar9300_2p0_mac_postamble,
ARRAY_SIZE(ar9300_2p0_mac_postamble), 5);
/* bb */
INIT_INI_ARRAY(&ah->iniBB[ATH_INI_PRE], NULL, 0, 0);
INIT_INI_ARRAY(&ah->iniBB[ATH_INI_CORE],
ar9300_2p0_baseband_core,
ARRAY_SIZE(ar9300_2p0_baseband_core), 2);
INIT_INI_ARRAY(&ah->iniBB[ATH_INI_POST],
ar9300_2p0_baseband_postamble,
ARRAY_SIZE(ar9300_2p0_baseband_postamble), 5);
/* radio */
INIT_INI_ARRAY(&ah->iniRadio[ATH_INI_PRE], NULL, 0, 0);
INIT_INI_ARRAY(&ah->iniRadio[ATH_INI_CORE],
ar9300_2p0_radio_core,
ARRAY_SIZE(ar9300_2p0_radio_core), 2);
INIT_INI_ARRAY(&ah->iniRadio[ATH_INI_POST],
ar9300_2p0_radio_postamble,
ARRAY_SIZE(ar9300_2p0_radio_postamble), 5);
/* soc */
INIT_INI_ARRAY(&ah->iniSOC[ATH_INI_PRE],
ar9300_2p0_soc_preamble,
ARRAY_SIZE(ar9300_2p0_soc_preamble), 2);
INIT_INI_ARRAY(&ah->iniSOC[ATH_INI_CORE], NULL, 0, 0);
INIT_INI_ARRAY(&ah->iniSOC[ATH_INI_POST],
ar9300_2p0_soc_postamble,
ARRAY_SIZE(ar9300_2p0_soc_postamble), 5);
/* rx/tx gain */
INIT_INI_ARRAY(&ah->iniModesRxGain,
ar9300Common_rx_gain_table_2p0,
ARRAY_SIZE(ar9300Common_rx_gain_table_2p0), 2);
INIT_INI_ARRAY(&ah->iniModesTxGain,
ar9300Modes_lowest_ob_db_tx_gain_table_2p0,
ARRAY_SIZE(ar9300Modes_lowest_ob_db_tx_gain_table_2p0),
5);
/* Load PCIE SERDES settings from INI */
/* Awake Setting */
INIT_INI_ARRAY(&ah->iniPcieSerdes,
ar9300PciePhy_pll_on_clkreq_disable_L1_2p0,
ARRAY_SIZE(ar9300PciePhy_pll_on_clkreq_disable_L1_2p0),
2);
/* Sleep Setting */
INIT_INI_ARRAY(&ah->iniPcieSerdesLowPower,
ar9300PciePhy_clkreq_enable_L1_2p0,
ARRAY_SIZE(ar9300PciePhy_clkreq_enable_L1_2p0),
2);
/* Fast clock modal settings */
INIT_INI_ARRAY(&ah->iniModesAdditional,
ar9300Modes_fast_clock_2p0,
ARRAY_SIZE(ar9300Modes_fast_clock_2p0),
3);
}
/*
* Helper for ASPM support.
*
* Disable PLL when in L0s as well as receiver clock when in L1.
* This power saving option must be enabled through the SerDes.
*
* Programming the SerDes must go through the same 288 bit serial shift
* register as the other analog registers. Hence the 9 writes.
*/
static void ar9003_hw_configpcipowersave(struct ath_hw *ah,
int restore,
int power_off)
{
if (ah->is_pciexpress != true)
return;
/* Do not touch SerDes registers */
if (ah->config.pcie_powersave_enable == 2)
return;
/* Nothing to do on restore for 11N */
if (!restore) {
/* set bit 19 to allow forcing of pcie core into L1 state */
REG_SET_BIT(ah, AR_PCIE_PM_CTRL, AR_PCIE_PM_CTRL_ENA);
/* Several PCIe massages to ensure proper behaviour */
if (ah->config.pcie_waen)
REG_WRITE(ah, AR_WA, ah->config.pcie_waen);
}
}
/* Sets up the AR9003 hardware familiy callbacks */
void ar9003_hw_attach_ops(struct ath_hw *ah)
{
struct ath_hw_private_ops *priv_ops = ath9k_hw_private_ops(ah);
struct ath_hw_ops *ops = ath9k_hw_ops(ah);
priv_ops->init_mode_regs = ar9003_hw_init_mode_regs;
priv_ops->macversion_supported = ar9003_hw_macversion_supported;
ops->config_pci_powersave = ar9003_hw_configpcipowersave;
ar9003_hw_attach_phy_ops(ah);
ar9003_hw_attach_calib_ops(ah);
ar9003_hw_attach_mac_ops(ah);
}
This diff is collapsed.
/*
* Copyright (c) 2008-2009 Atheros Communications Inc.
* Copyright (c) 2008-2010 Atheros Communications Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
......@@ -852,6 +852,9 @@ void ar9003_hw_attach_phy_ops(struct ath_hw *ah);
void ar9002_hw_attach_calib_ops(struct ath_hw *ah);
void ar9003_hw_attach_calib_ops(struct ath_hw *ah);
void ar9002_hw_attach_ops(struct ath_hw *ah);
void ar9003_hw_attach_ops(struct ath_hw *ah);
#define ATH_PCIE_CAP_LINK_CTRL 0x70
#define ATH_PCIE_CAP_LINK_L0S 1
#define ATH_PCIE_CAP_LINK_L1 2
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment