Commit b3b96144 authored by Manu Abraham's avatar Manu Abraham Committed by Mauro Carvalho Chehab

V4L/DVB (13795): [Mantis/Hopper] Code overhaul, add Hopper devices into the PCI ID list

Signed-off-by: default avatarManu Abraham <manu@linuxtv.org>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
parent add20636
config MANTIS_CORE
tristate "Mantis/Hopper PCI bridge based devices"
depends on PCI && I2C
help
Support for PCI cards based on the Mantis and Hopper PCi bridge.
Say Y if you own such a device and want to use it.
config DVB_MANTIS
tristate "MANTIS based cards"
depends on DVB_CORE && PCI && I2C
depends on MANTIS_CORE && DVB_CORE && PCI && I2C
select DVB_MB86A16
select DVB_CU1216
select DVB_ZL10353
......@@ -11,3 +20,14 @@ config DVB_MANTIS
Say Y when you have a Mantis based DVB card and want to use it.
If unsure say N.
config DVB_HOPPER
tristate "HOPPER based cards"
depends on MANTIS_CORE && DVB_CORE && PCI && I2C
select DVB_ZL10353
select DVB_PLL
help
Support for PCI cards based on the Hopper PCI bridge.
Say Y when you have a Hopper based DVB card and want to use it.
If unsure say N
mantis-objs = mantis_core.o \
mantis_uart.o \
mantis_dma.o \
mantis_pci.o \
mantis_i2c.o \
mantis_dvb.o \
mantis_evm.o \
mantis_hif.o \
mantis_ca.o \
mantis_pcmcia.o \
mantis_vp1033.o \
mantis_vp1034.o \
mantis_vp1041.o \
mantis_vp2033.o \
mantis_vp2040.o \
mantis_vp3028.o \
mantis_vp3030.o
mantis_core-objs := mantis_ioc.o \
mantis_uart.o \
mantis_dma.o \
mantis_pci.o \
mantis_i2c.o \
mantis_dvb.o \
mantis_evm.o \
mantis_hif.o \
mantis_ca.o \
mantis_pcmcia.o
obj-$(CONFIG_DVB_MANTIS) += mantis.o
mantis-objs := mantis_cards.o \
mantis_vp1033.o \
mantis_vp1034.o \
mantis_vp1041.o \
mantis_vp2033.o \
mantis_vp2040.o \
mantis_vp3030.o
hopper-objs := hopper_cards.o \
hopper_vp3028.o
obj-$(CONFIG_MANTIS_CORE) += mantis_core.o
obj-$(CONFIG_DVB_MANTIS) += mantis.o
obj-$(CONFIG_DVB_HOPPER) += hopper.o
EXTRA_CFLAGS = -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/kernel.h>
#include <linux/pci.h>
#include <asm/irq.h>
#include <linux/interrupt.h>
#include "dmxdev.h"
#include "dvbdev.h"
#include "dvb_demux.h"
#include "dvb_frontend.h"
#include "dvb_net.h"
#include "mantis_common.h"
#include "hopper_vp3028.h"
#include "mantis_dma.h"
#include "mantis_dvb.h"
#include "mantis_uart.h"
#include "mantis_ioc.h"
#include "mantis_pci.h"
#include "mantis_i2c.h"
#include "mantis_reg.h"
static unsigned int verbose;
module_param(verbose, int, 0644);
MODULE_PARM_DESC(verbose, "verbose startup messages, default is 1 (yes)");
#define DRIVER_NAME "Hopper"
static char *label[10] = {
"DMA",
"IRQ-0",
"IRQ-1",
"OCERR",
"PABRT",
"RIPRR",
"PPERR",
"FTRGT",
"RISCI",
"RACK"
};
static int devs;
static irqreturn_t hopper_irq_handler(int irq, void *dev_id)
{
u32 stat = 0, mask = 0, lstat = 0, mstat = 0;
u32 rst_stat = 0, rst_mask = 0;
struct mantis_pci *mantis;
struct mantis_ca *ca;
mantis = (struct mantis_pci *) dev_id;
if (unlikely(mantis == NULL)) {
dprintk(MANTIS_ERROR, 1, "Mantis == NULL");
return IRQ_NONE;
}
ca = mantis->mantis_ca;
stat = mmread(MANTIS_INT_STAT);
mask = mmread(MANTIS_INT_MASK);
mstat = lstat = stat & ~MANTIS_INT_RISCSTAT;
if (!(stat & mask))
return IRQ_NONE;
rst_mask = MANTIS_GPIF_WRACK |
MANTIS_GPIF_OTHERR |
MANTIS_SBUF_WSTO |
MANTIS_GPIF_EXTIRQ;
rst_stat = mmread(MANTIS_GPIF_STATUS);
rst_stat &= rst_mask;
mmwrite(rst_stat, MANTIS_GPIF_STATUS);
mantis->mantis_int_stat = stat;
mantis->mantis_int_mask = mask;
dprintk(MANTIS_DEBUG, 0, "\n-- Stat=<%02x> Mask=<%02x> --", stat, mask);
if (stat & MANTIS_INT_RISCEN) {
dprintk(MANTIS_DEBUG, 0, "<%s>", label[0]);
}
if (stat & MANTIS_INT_IRQ0) {
dprintk(MANTIS_DEBUG, 0, "<%s>", label[1]);
mantis->gpif_status = rst_stat;
wake_up(&ca->hif_write_wq);
schedule_work(&ca->hif_evm_work);
}
if (stat & MANTIS_INT_IRQ1) {
dprintk(MANTIS_DEBUG, 0, "<%s>", label[2]);
schedule_work(&mantis->uart_work);
}
if (stat & MANTIS_INT_OCERR) {
dprintk(MANTIS_DEBUG, 0, "<%s>", label[3]);
}
if (stat & MANTIS_INT_PABORT) {
dprintk(MANTIS_DEBUG, 0, "<%s>", label[4]);
}
if (stat & MANTIS_INT_RIPERR) {
dprintk(MANTIS_DEBUG, 0, "<%s>", label[5]);
}
if (stat & MANTIS_INT_PPERR) {
dprintk(MANTIS_DEBUG, 0, "<%s>", label[6]);
}
if (stat & MANTIS_INT_FTRGT) {
dprintk(MANTIS_DEBUG, 0, "<%s>", label[7]);
}
if (stat & MANTIS_INT_RISCI) {
dprintk(MANTIS_DEBUG, 0, "<%s>", label[8]);
mantis->finished_block = (stat & MANTIS_INT_RISCSTAT) >> 28;
tasklet_schedule(&mantis->tasklet);
}
if (stat & MANTIS_INT_I2CDONE) {
dprintk(MANTIS_DEBUG, 0, "<%s>", label[9]);
wake_up(&mantis->i2c_wq);
}
mmwrite(stat, MANTIS_INT_STAT);
stat &= ~(MANTIS_INT_RISCEN | MANTIS_INT_I2CDONE |
MANTIS_INT_I2CRACK | MANTIS_INT_PCMCIA7 |
MANTIS_INT_PCMCIA6 | MANTIS_INT_PCMCIA5 |
MANTIS_INT_PCMCIA4 | MANTIS_INT_PCMCIA3 |
MANTIS_INT_PCMCIA2 | MANTIS_INT_PCMCIA1 |
MANTIS_INT_PCMCIA0 | MANTIS_INT_IRQ1 |
MANTIS_INT_IRQ0 | MANTIS_INT_OCERR |
MANTIS_INT_PABORT | MANTIS_INT_RIPERR |
MANTIS_INT_PPERR | MANTIS_INT_FTRGT |
MANTIS_INT_RISCI);
if (stat)
dprintk(MANTIS_DEBUG, 0, "<Unknown> Stat=<%02x> Mask=<%02x>", stat, mask);
dprintk(MANTIS_DEBUG, 0, "\n");
return IRQ_HANDLED;
}
static int __devinit hopper_pci_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id)
{
struct mantis_pci *mantis;
struct mantis_hwconfig *config;
int err = 0;
mantis = kzalloc(sizeof (struct mantis_pci), GFP_KERNEL);
if (mantis == NULL) {
printk(KERN_ERR "%s ERROR: Out of memory\n", __func__);
err = -ENOMEM;
goto fail0;
}
mantis->num = devs;
mantis->verbose = verbose;
mantis->pdev = pdev;
config = (struct mantis_hwconfig *) pci_id->driver_data;
config->irq_handler = &hopper_irq_handler;
mantis->hwconfig = config;
err = mantis_pci_init(mantis);
if (err) {
dprintk(MANTIS_ERROR, 1, "ERROR: Mantis PCI initialization failed <%d>", err);
goto fail1;
}
err = mantis_stream_control(mantis, STREAM_TO_HIF);
if (err < 0) {
dprintk(MANTIS_ERROR, 1, "ERROR: Mantis stream control failed <%d>", err);
goto fail1;
}
err = mantis_i2c_init(mantis);
if (err < 0) {
dprintk(MANTIS_ERROR, 1, "ERROR: Mantis I2C initialization failed <%d>", err);
goto fail2;
}
err = mantis_get_mac(mantis);
if (err < 0) {
dprintk(MANTIS_ERROR, 1, "ERROR: Mantis MAC address read failed <%d>", err);
goto fail2;
}
err = mantis_dma_init(mantis);
if (err < 0) {
dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DMA initialization failed <%d>", err);
goto fail3;
}
err = mantis_dvb_init(mantis);
if (err < 0) {
dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DVB initialization failed <%d>", err);
goto fail4;
}
devs++;
return err;
fail5:
dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DVB exit! <%d>", err);
mantis_dvb_exit(mantis);
fail4:
dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DMA exit! <%d>", err);
mantis_dma_exit(mantis);
fail3:
dprintk(MANTIS_ERROR, 1, "ERROR: Mantis I2C exit! <%d>", err);
mantis_i2c_exit(mantis);
fail2:
dprintk(MANTIS_ERROR, 1, "ERROR: Mantis PCI exit! <%d>", err);
mantis_pci_exit(mantis);
fail1:
dprintk(MANTIS_ERROR, 1, "ERROR: Mantis free! <%d>", err);
kfree(mantis);
fail0:
return err;
}
static void __devexit hopper_pci_remove(struct pci_dev *pdev)
{
struct mantis_pci *mantis = pci_get_drvdata(pdev);
if (mantis) {
// mantis_uart_exit(mantis);
mantis_dvb_exit(mantis);
mantis_dma_exit(mantis);
mantis_i2c_exit(mantis);
mantis_pci_exit(mantis);
kfree(mantis);
}
return;
}
static struct pci_device_id hopper_pci_table[] = {
MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_3028_DVB_T, &vp3028_config),
{ }
};
static struct pci_driver hopper_pci_driver = {
.name = DRIVER_NAME,
.id_table = hopper_pci_table,
.probe = hopper_pci_probe,
.remove = hopper_pci_remove,
};
static int __devinit hopper_init(void)
{
return pci_register_driver(&hopper_pci_driver);
}
static void __devexit hopper_exit(void)
{
return pci_unregister_driver(&hopper_pci_driver);
}
module_init(hopper_init);
module_exit(hopper_exit);
MODULE_DESCRIPTION("HOPPER driver");
MODULE_AUTHOR("Manu Abraham");
MODULE_LICENSE("GPL");
/*
Mantis VP-3028 driver
Copyright (C) 2005, 2006 Manu Abraham (abraham.manu@gmail.com)
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <asm/irq.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include "dmxdev.h"
#include "dvbdev.h"
#include "dvb_demux.h"
#include "dvb_frontend.h"
#include "dvb_net.h"
#include "zl10353.h"
#include "mantis_common.h"
#include "mantis_ioc.h"
#include "mantis_dvb.h"
#include "hopper_vp3028.h"
struct zl10353_config hopper_vp3028_config = {
.demod_address = 0x0f,
};
#define MANTIS_MODEL_NAME "VP-3028"
#define MANTIS_DEV_TYPE "DVB-T"
static int vp3028_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe)
{
struct i2c_adapter *adapter = &mantis->adapter;
int err = 0;
err = mantis_frontend_power(mantis, POWER_ON);
mantis_frontend_soft_reset(mantis);
dprintk(MANTIS_ERROR, 1, "Probing for 10353 (DVB-T)");
fe = zl10353_attach(&hopper_vp3028_config, adapter);
if (!fe)
return -1;
dprintk(MANTIS_ERROR, 1, "Done!");
return 0;
}
struct mantis_hwconfig vp3028_config = {
.model_name = MANTIS_MODEL_NAME,
.dev_type = MANTIS_DEV_TYPE,
.ts_size = MANTIS_TS_188,
.baud_rate = MANTIS_BAUD_9600,
.parity = MANTIS_PARITY_NONE,
.bytes = 0,
.frontend_init = vp3028_frontend_init,
.power = GPIF_A00,
.reset = GPIF_A03,
};
#ifndef __MANTIS_VP3028_H
#define __MANTIS_VP3028_H
#include "mantis_common.h"
#define MANTIS_VP_3028_DVB_T 0x0028
extern struct mantis_hwconfig vp3028_config;
#endif /* __MANTIS_VP3028_H */
......@@ -18,16 +18,30 @@
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <asm/irq.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include "dmxdev.h"
#include "dvbdev.h"
#include "dvb_demux.h"
#include "dvb_frontend.h"
#include "dvb_net.h"
#include "mantis_common.h"
#include "mantis_link.h"
#include "mantis_hif.h"
#include "mantis_reg.h"
#include "mantis_ca.h"
static int mantis_ca_read_attr_mem(struct dvb_ca_en50221 *en50221, int slot, int addr)
{
struct mantis_ca *ca = en50221->data;
struct mantis_pci *mantis = ca->ca_priv;
dprintk(verbose, MANTIS_DEBUG, 1, "Slot(%d): Request Attribute Mem Read", slot);
dprintk(MANTIS_DEBUG, 1, "Slot(%d): Request Attribute Mem Read", slot);
if (slot != 0)
return -EINVAL;
......@@ -40,7 +54,7 @@ static int mantis_ca_write_attr_mem(struct dvb_ca_en50221 *en50221, int slot, in
struct mantis_ca *ca = en50221->data;
struct mantis_pci *mantis = ca->ca_priv;
dprintk(verbose, MANTIS_DEBUG, 1, "Slot(%d): Request Attribute Mem Write", slot);
dprintk(MANTIS_DEBUG, 1, "Slot(%d): Request Attribute Mem Write", slot);
if (slot != 0)
return -EINVAL;
......@@ -53,7 +67,7 @@ static int mantis_ca_read_cam_ctl(struct dvb_ca_en50221 *en50221, int slot, u8 a
struct mantis_ca *ca = en50221->data;
struct mantis_pci *mantis = ca->ca_priv;
dprintk(verbose, MANTIS_DEBUG, 1, "Slot(%d): Request CAM control Read", slot);
dprintk(MANTIS_DEBUG, 1, "Slot(%d): Request CAM control Read", slot);
if (slot != 0)
return -EINVAL;
......@@ -66,7 +80,7 @@ static int mantis_ca_write_cam_ctl(struct dvb_ca_en50221 *en50221, int slot, u8
struct mantis_ca *ca = en50221->data;
struct mantis_pci *mantis = ca->ca_priv;
dprintk(verbose, MANTIS_DEBUG, 1, "Slot(%d): Request CAM control Write", slot);
dprintk(MANTIS_DEBUG, 1, "Slot(%d): Request CAM control Write", slot);
if (slot != 0)
return -EINVAL;
......@@ -79,7 +93,7 @@ static int mantis_ca_slot_reset(struct dvb_ca_en50221 *en50221, int slot)
struct mantis_ca *ca = en50221->data;
struct mantis_pci *mantis = ca->ca_priv;
dprintk(verbose, MANTIS_DEBUG, 1, "Slot(%d): Slot RESET", slot);
dprintk(MANTIS_DEBUG, 1, "Slot(%d): Slot RESET", slot);
udelay(500); /* Wait.. */
mmwrite(0xda, MANTIS_PCMCIA_RESET); /* Leading edge assert */
udelay(500);
......@@ -95,7 +109,7 @@ static int mantis_ca_slot_shutdown(struct dvb_ca_en50221 *en50221, int slot)
struct mantis_ca *ca = en50221->data;
struct mantis_pci *mantis = ca->ca_priv;
dprintk(verbose, MANTIS_DEBUG, 1, "Slot(%d): Slot shutdown", slot);
dprintk(MANTIS_DEBUG, 1, "Slot(%d): Slot shutdown", slot);
return 0;
}
......@@ -105,8 +119,8 @@ static int mantis_ts_control(struct dvb_ca_en50221 *en50221, int slot)
struct mantis_ca *ca = en50221->data;
struct mantis_pci *mantis = ca->ca_priv;
dprintk(verbose, MANTIS_DEBUG, 1, "Slot(%d): TS control", slot);
mantis_set_direction(mantis, 1); /* Enable TS through CAM */
dprintk(MANTIS_DEBUG, 1, "Slot(%d): TS control", slot);
// mantis_set_direction(mantis, 1); /* Enable TS through CAM */
return 0;
}
......@@ -116,13 +130,13 @@ static int mantis_slot_status(struct dvb_ca_en50221 *en50221, int slot, int open
struct mantis_ca *ca = en50221->data;
struct mantis_pci *mantis = ca->ca_priv;
dprintk(verbose, MANTIS_DEBUG, 1, "Slot(%d): Poll Slot status", slot);
dprintk(MANTIS_DEBUG, 1, "Slot(%d): Poll Slot status", slot);
if (ca->slot_state == MODULE_INSERTED) {
dprintk(verbose, MANTIS_DEBUG, 1, "CA Module present and ready");
dprintk(MANTIS_DEBUG, 1, "CA Module present and ready");
return DVB_CA_EN50221_POLL_CAM_PRESENT | DVB_CA_EN50221_POLL_CAM_READY;
} else {
dprintk(verbose, MANTIS_DEBUG, 1, "CA Module not present or not ready");
dprintk(MANTIS_DEBUG, 1, "CA Module not present or not ready");
}
return 0;
......@@ -130,20 +144,21 @@ static int mantis_slot_status(struct dvb_ca_en50221 *en50221, int slot, int open
int mantis_ca_init(struct mantis_pci *mantis)
{
struct dvb_adapter *dvb_adapter = &mantis->dvb_adapter;
struct dvb_adapter *dvb_adapter = &mantis->dvb_adapter;
struct mantis_ca *ca;
int ca_flags = 0, result;
dprintk(verbose, MANTIS_DEBUG, 1, "Initializing Mantis CA");
if (!(ca = kzalloc(sizeof (struct mantis_ca), GFP_KERNEL))) {
dprintk(verbose, MANTIS_ERROR, 1, "Out of memory!, exiting ..");
dprintk(MANTIS_DEBUG, 1, "Initializing Mantis CA");
ca = kzalloc(sizeof (struct mantis_ca), GFP_KERNEL);
if (!ca) {
dprintk(MANTIS_ERROR, 1, "Out of memory!, exiting ..");
result = -ENOMEM;
goto err;
}
ca->ca_priv = mantis;
mantis->mantis_ca = ca;
ca_flags = DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE;
ca->ca_priv = mantis;
mantis->mantis_ca = ca;
ca_flags = DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE;
/* register CA interface */
ca->en50221.owner = THIS_MODULE;
ca->en50221.read_attribute_mem = mantis_ca_read_attr_mem;
......@@ -162,28 +177,32 @@ int mantis_ca_init(struct mantis_pci *mantis)
init_waitqueue_head(&ca->hif_opdone_wq);
init_waitqueue_head(&ca->hif_write_wq);
dprintk(verbose, MANTIS_ERROR, 1, "Registering EN50221 device");
if ((result = dvb_ca_en50221_init(dvb_adapter, &ca->en50221, ca_flags, 1)) != 0) {
dprintk(verbose, MANTIS_ERROR, 1, "EN50221: Initialization failed");
dprintk(MANTIS_ERROR, 1, "Registering EN50221 device");
result = dvb_ca_en50221_init(dvb_adapter, &ca->en50221, ca_flags, 1);
if (result != 0) {
dprintk(MANTIS_ERROR, 1, "EN50221: Initialization failed <%d>", result);
goto err;
}
dprintk(verbose, MANTIS_ERROR, 1, "Registered EN50221 device");
dprintk(MANTIS_ERROR, 1, "Registered EN50221 device");
mantis_evmgr_init(ca);
return 0;
err:
kfree(ca);
return result;
}
EXPORT_SYMBOL_GPL(mantis_ca_init);
void mantis_ca_exit(struct mantis_pci *mantis)
{
struct mantis_ca *ca = mantis->mantis_ca;
dprintk(verbose, MANTIS_DEBUG, 1, "Mantis CA exit");
dprintk(MANTIS_DEBUG, 1, "Mantis CA exit");
mantis_evmgr_exit(ca);
dprintk(verbose, MANTIS_ERROR, 1, "Unregistering EN50221 device");
dvb_ca_en50221_release(&ca->en50221);
dprintk(MANTIS_ERROR, 1, "Unregistering EN50221 device");
if (ca)
dvb_ca_en50221_release(&ca->en50221);
kfree(ca);
}
EXPORT_SYMBOL_GPL(mantis_ca_exit);
#ifndef __MANTIS_CA_H
#define __MANTIS_CA_H
extern int mantis_ca_init(struct mantis_pci *mantis);
extern void mantis_ca_exit(struct mantis_pci *mantis);
#endif /* __MANTIS_CA_H */
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/kernel.h>
#include <linux/pci.h>
#include <asm/irq.h>
#include <linux/interrupt.h>
#include "dmxdev.h"
#include "dvbdev.h"
#include "dvb_demux.h"
#include "dvb_frontend.h"
#include "dvb_net.h"
#include "mantis_common.h"
#include "mantis_vp1033.h"
#include "mantis_vp1034.h"
#include "mantis_vp1041.h"
#include "mantis_vp2033.h"
#include "mantis_vp2040.h"
#include "mantis_vp3030.h"
#include "mantis_dma.h"
#include "mantis_ca.h"
#include "mantis_dvb.h"
#include "mantis_uart.h"
#include "mantis_ioc.h"
#include "mantis_pci.h"
#include "mantis_i2c.h"
#include "mantis_reg.h"
static unsigned int verbose;
module_param(verbose, int, 0644);
MODULE_PARM_DESC(verbose, "verbose startup messages, default is 1 (yes)");
static int devs;
#define DRIVER_NAME "Mantis"
static char *label[10] = {
"DMA",
"IRQ-0",
"IRQ-1",
"OCERR",
"PABRT",
"RIPRR",
"PPERR",
"FTRGT",
"RISCI",
"RACK"
};
static irqreturn_t mantis_irq_handler(int irq, void *dev_id)
{
u32 stat = 0, mask = 0, lstat = 0, mstat = 0;
u32 rst_stat = 0, rst_mask = 0;
struct mantis_pci *mantis;
struct mantis_ca *ca;
mantis = (struct mantis_pci *) dev_id;
if (unlikely(mantis == NULL)) {
dprintk(MANTIS_ERROR, 1, "Mantis == NULL");
return IRQ_NONE;
}
ca = mantis->mantis_ca;
stat = mmread(MANTIS_INT_STAT);
mask = mmread(MANTIS_INT_MASK);
mstat = lstat = stat & ~MANTIS_INT_RISCSTAT;
if (!(stat & mask))
return IRQ_NONE;
rst_mask = MANTIS_GPIF_WRACK |
MANTIS_GPIF_OTHERR |
MANTIS_SBUF_WSTO |
MANTIS_GPIF_EXTIRQ;
rst_stat = mmread(MANTIS_GPIF_STATUS);
rst_stat &= rst_mask;
mmwrite(rst_stat, MANTIS_GPIF_STATUS);
mantis->mantis_int_stat = stat;
mantis->mantis_int_mask = mask;
dprintk(MANTIS_DEBUG, 0, "\n-- Stat=<%02x> Mask=<%02x> --", stat, mask);
if (stat & MANTIS_INT_RISCEN) {
dprintk(MANTIS_DEBUG, 0, "<%s>", label[0]);
}
if (stat & MANTIS_INT_IRQ0) {
dprintk(MANTIS_DEBUG, 0, "<%s>", label[1]);
mantis->gpif_status = rst_stat;
wake_up(&ca->hif_write_wq);
schedule_work(&ca->hif_evm_work);
}
if (stat & MANTIS_INT_IRQ1) {
dprintk(MANTIS_DEBUG, 0, "<%s>", label[2]);
schedule_work(&mantis->uart_work);
}
if (stat & MANTIS_INT_OCERR) {
dprintk(MANTIS_DEBUG, 0, "<%s>", label[3]);
}
if (stat & MANTIS_INT_PABORT) {
dprintk(MANTIS_DEBUG, 0, "<%s>", label[4]);
}
if (stat & MANTIS_INT_RIPERR) {
dprintk(MANTIS_DEBUG, 0, "<%s>", label[5]);
}
if (stat & MANTIS_INT_PPERR) {
dprintk(MANTIS_DEBUG, 0, "<%s>", label[6]);
}
if (stat & MANTIS_INT_FTRGT) {
dprintk(MANTIS_DEBUG, 0, "<%s>", label[7]);
}
if (stat & MANTIS_INT_RISCI) {
dprintk(MANTIS_DEBUG, 0, "<%s>", label[8]);
mantis->finished_block = (stat & MANTIS_INT_RISCSTAT) >> 28;
tasklet_schedule(&mantis->tasklet);
}
if (stat & MANTIS_INT_I2CDONE) {
dprintk(MANTIS_DEBUG, 0, "<%s>", label[9]);
wake_up(&mantis->i2c_wq);
}
mmwrite(stat, MANTIS_INT_STAT);
stat &= ~(MANTIS_INT_RISCEN | MANTIS_INT_I2CDONE |
MANTIS_INT_I2CRACK | MANTIS_INT_PCMCIA7 |
MANTIS_INT_PCMCIA6 | MANTIS_INT_PCMCIA5 |
MANTIS_INT_PCMCIA4 | MANTIS_INT_PCMCIA3 |
MANTIS_INT_PCMCIA2 | MANTIS_INT_PCMCIA1 |
MANTIS_INT_PCMCIA0 | MANTIS_INT_IRQ1 |
MANTIS_INT_IRQ0 | MANTIS_INT_OCERR |
MANTIS_INT_PABORT | MANTIS_INT_RIPERR |
MANTIS_INT_PPERR | MANTIS_INT_FTRGT |
MANTIS_INT_RISCI);
if (stat)
dprintk(MANTIS_DEBUG, 0, "<Unknown> Stat=<%02x> Mask=<%02x>", stat, mask);
dprintk(MANTIS_DEBUG, 0, "\n");
return IRQ_HANDLED;
}
static int __devinit mantis_pci_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id)
{
struct mantis_pci *mantis;
struct mantis_hwconfig *config;
int err = 0;
mantis = kzalloc(sizeof (struct mantis_pci), GFP_KERNEL);
if (mantis == NULL) {
printk(KERN_ERR "%s ERROR: Out of memory\n", __func__);
err = -ENOMEM;
goto fail0;
}
mantis->num = devs;
mantis->verbose = verbose;
mantis->pdev = pdev;
config = (struct mantis_hwconfig *) pci_id->driver_data;
config->irq_handler = &mantis_irq_handler;
mantis->hwconfig = config;
err = mantis_pci_init(mantis);
if (err) {
dprintk(MANTIS_ERROR, 1, "ERROR: Mantis PCI initialization failed <%d>", err);
goto fail1;
}
err = mantis_stream_control(mantis, STREAM_TO_HIF);
if (err < 0) {
dprintk(MANTIS_ERROR, 1, "ERROR: Mantis stream control failed <%d>", err);
goto fail1;
}
err = mantis_i2c_init(mantis);
if (err < 0) {
dprintk(MANTIS_ERROR, 1, "ERROR: Mantis I2C initialization failed <%d>", err);
goto fail2;
}
err = mantis_get_mac(mantis);
if (err < 0) {
dprintk(MANTIS_ERROR, 1, "ERROR: Mantis MAC address read failed <%d>", err);
goto fail2;
}
err = mantis_dma_init(mantis);
if (err < 0) {
dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DMA initialization failed <%d>", err);
goto fail3;
}
err = mantis_dvb_init(mantis);
if (err < 0) {
dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DVB initialization failed <%d>", err);
goto fail4;
}
devs++;
return err;
fail5:
dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DVB exit! <%d>", err);
mantis_dvb_exit(mantis);
fail4:
dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DMA exit! <%d>", err);
mantis_dma_exit(mantis);
fail3:
dprintk(MANTIS_ERROR, 1, "ERROR: Mantis I2C exit! <%d>", err);
mantis_i2c_exit(mantis);
fail2:
dprintk(MANTIS_ERROR, 1, "ERROR: Mantis PCI exit! <%d>", err);
mantis_pci_exit(mantis);
fail1:
dprintk(MANTIS_ERROR, 1, "ERROR: Mantis free! <%d>", err);
kfree(mantis);
fail0:
return err;
}
static void __devexit mantis_pci_remove(struct pci_dev *pdev)
{
struct mantis_pci *mantis = pci_get_drvdata(pdev);
if (mantis) {
mantis_uart_exit(mantis);
// mantis_ca_exit(mantis);
mantis_dvb_exit(mantis);
mantis_dma_exit(mantis);
mantis_i2c_exit(mantis);
mantis_pci_exit(mantis);
kfree(mantis);
}
return;
}
static struct pci_device_id mantis_pci_table[] = {
MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_1033_DVB_S, &vp1033_config),
MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_1034_DVB_S, &vp1034_config),
MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_1041_DVB_S2, &vp1041_config),
MAKE_ENTRY(TECHNISAT, SKYSTAR_HD2_10, &vp1041_config),
MAKE_ENTRY(TECHNISAT, SKYSTAR_HD2_20, &vp1041_config),
MAKE_ENTRY(TERRATEC, CINERGY_S2_PCI_HD, &vp1041_config),
MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_2033_DVB_C, &vp2033_config),
MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_2040_DVB_C, &vp2040_config),
MAKE_ENTRY(TECHNISAT, CABLESTAR_HD2, &vp2040_config),
MAKE_ENTRY(TERRATEC, CINERGY_C, &vp2033_config),
MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_3030_DVB_T, &vp3030_config),
{ }
};
static struct pci_driver mantis_pci_driver = {
.name = DRIVER_NAME,
.id_table = mantis_pci_table,
.probe = mantis_pci_probe,
.remove = mantis_pci_remove,
};
static int __devinit mantis_init(void)
{
return pci_register_driver(&mantis_pci_driver);
}
static void __devexit mantis_exit(void)
{
return pci_unregister_driver(&mantis_pci_driver);
}
module_init(mantis_init);
module_exit(mantis_exit);
MODULE_DESCRIPTION("MANTIS driver");
MODULE_AUTHOR("Manu Abraham");
MODULE_LICENSE("GPL");
......@@ -21,20 +21,9 @@
#ifndef __MANTIS_COMMON_H
#define __MANTIS_COMMON_H
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/mutex.h>
#include <linux/workqueue.h>
#include "dvbdev.h"
#include "dvb_demux.h"
#include "dmxdev.h"
#include "dvb_frontend.h"
#include "dvb_net.h"
#include <linux/i2c.h>
#include "mantis_reg.h"
#include "mantis_uart.h"
#include "mantis_link.h"
......@@ -44,18 +33,18 @@
#define MANTIS_INFO 2
#define MANTIS_DEBUG 3
#define dprintk(x, y, z, format, arg...) do { \
#define dprintk(y, z, format, arg...) do { \
if (z) { \
if ((x > MANTIS_ERROR) && (x > y)) \
if ((mantis->verbose > MANTIS_ERROR) && (mantis->verbose > y)) \
printk(KERN_ERR "%s (%d): " format "\n" , __func__ , mantis->num , ##arg); \
else if ((x > MANTIS_NOTICE) && (x > y)) \
else if ((mantis->verbose > MANTIS_NOTICE) && (mantis->verbose > y)) \
printk(KERN_NOTICE "%s (%d): " format "\n" , __func__ , mantis->num , ##arg); \
else if ((x > MANTIS_INFO) && (x > y)) \
else if ((mantis->verbose > MANTIS_INFO) && (mantis->verbose > y)) \
printk(KERN_INFO "%s (%d): " format "\n" , __func__ , mantis->num , ##arg); \
else if ((x > MANTIS_DEBUG) && (x > y)) \
else if ((mantis->verbose > MANTIS_DEBUG) && (mantis->verbose > y)) \
printk(KERN_DEBUG "%s (%d): " format "\n" , __func__ , mantis->num , ##arg); \
} else { \
if (x > y) \
if (mantis->verbose > y) \
printk(format , ##arg); \
} \
} while(0)
......@@ -63,8 +52,8 @@
#define mwrite(dat, addr) writel((dat), addr)
#define mread(addr) readl(addr)
#define mmwrite(dat, addr) mwrite((dat), (mantis->mantis_mmio + (addr)))
#define mmread(addr) mread(mantis->mantis_mmio + (addr))
#define mmwrite(dat, addr) mwrite((dat), (mantis->mmio + (addr)))
#define mmread(addr) mread(mantis->mmio + (addr))
#define mmand(dat, addr) mmwrite((dat) & mmread(addr), addr)
#define mmor(dat, addr) mmwrite((dat) | mmread(addr), addr)
#define mmaor(dat, addr) mmwrite((dat) | ((mask) & mmread(addr)), addr)
......@@ -72,6 +61,22 @@
#define MANTIS_TS_188 0
#define MANTIS_TS_204 1
#define TWINHAN_TECHNOLOGIES 0x1822
#define MANTIS 0x4e35
#define TECHNISAT 0x1ae4
#define TERRATEC 0x153b
#define MAKE_ENTRY(__subven, __subdev, __configptr) { \
.vendor = TWINHAN_TECHNOLOGIES, \
.device = MANTIS, \
.subvendor = (__subven), \
.subdevice = (__subdev), \
.driver_data = (unsigned long) (__configptr) \
}
struct mantis_pci;
struct mantis_hwconfig {
char *model_name;
char *dev_type;
......@@ -80,6 +85,12 @@ struct mantis_hwconfig {
enum mantis_baud baud_rate;
enum mantis_parity parity;
u32 bytes;
irqreturn_t (*irq_handler)(int irq, void *dev_id);
int (*frontend_init)(struct mantis_pci *mantis, struct dvb_frontend *fe);
u8 power;
u8 reset;
};
struct mantis_pci {
......@@ -96,7 +107,7 @@ struct mantis_pci {
struct pci_dev *pdev;
unsigned long mantis_addr;
volatile void __iomem *mantis_mmio;
void __iomem *mmio;
u8 irq;
u8 revision;
......@@ -156,19 +167,4 @@ struct mantis_pci {
#define MANTIS_HIF_STATUS (mantis->gpio_status)
extern unsigned int verbose;
extern unsigned int devs;
extern unsigned int i2c;
extern int mantis_dvb_init(struct mantis_pci *mantis);
extern int mantis_frontend_init(struct mantis_pci *mantis);
extern int mantis_dvb_exit(struct mantis_pci *mantis);
extern void mantis_dma_xfer(unsigned long data);
extern void gpio_set_bits(struct mantis_pci *mantis, u32 bitpos, u8 value);
extern void mantis_set_direction(struct mantis_pci *mantis, int direction);
extern int mantis_ca_init(struct mantis_pci *mantis);
extern void mantis_ca_exit(struct mantis_pci *mantis);
#endif //__MANTIS_COMMON_H
#endif /* __MANTIS_COMMON_H */
......@@ -18,9 +18,25 @@
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/kernel.h>
#include <asm/page.h>
#include <linux/vmalloc.h>
#include <linux/pci.h>
#include <asm/irq.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include "dmxdev.h"
#include "dvbdev.h"
#include "dvb_demux.h"
#include "dvb_frontend.h"
#include "dvb_net.h"
#include "mantis_common.h"
#include "mantis_reg.h"
#include "mantis_dma.h"
#define RISC_WRITE (0x01 << 28)
#define RISC_JUMP (0x07 << 28)
......@@ -38,7 +54,7 @@
int mantis_dma_exit(struct mantis_pci *mantis)
{
if (mantis->buf_cpu) {
dprintk(verbose, MANTIS_ERROR, 1,
dprintk(MANTIS_ERROR, 1,
"DMA=0x%lx cpu=0x%p size=%d",
(unsigned long) mantis->buf_dma,
mantis->buf_cpu,
......@@ -50,7 +66,7 @@ int mantis_dma_exit(struct mantis_pci *mantis)
mantis->buf_cpu = NULL;
}
if (mantis->risc_cpu) {
dprintk(verbose, MANTIS_ERROR, 1,
dprintk(MANTIS_ERROR, 1,
"RISC=0x%lx cpu=0x%p size=%lx",
(unsigned long) mantis->risc_dma,
mantis->risc_cpu,
......@@ -64,6 +80,7 @@ int mantis_dma_exit(struct mantis_pci *mantis)
return 0;
}
EXPORT_SYMBOL_GPL(mantis_dma_exit);
static inline int mantis_alloc_buffers(struct mantis_pci *mantis)
{
......@@ -72,12 +89,12 @@ static inline int mantis_alloc_buffers(struct mantis_pci *mantis)
MANTIS_BUF_SIZE,
&mantis->buf_dma);
if (!mantis->buf_cpu) {
dprintk(verbose, MANTIS_ERROR, 1,
dprintk(MANTIS_ERROR, 1,
"DMA buffer allocation failed");
goto err;
}
dprintk(verbose, MANTIS_ERROR, 1,
dprintk(MANTIS_ERROR, 1,
"DMA=0x%lx cpu=0x%p size=%d",
(unsigned long) mantis->buf_dma,
mantis->buf_cpu, MANTIS_BUF_SIZE);
......@@ -88,14 +105,14 @@ static inline int mantis_alloc_buffers(struct mantis_pci *mantis)
&mantis->risc_dma);
if (!mantis->risc_cpu) {
dprintk(verbose, MANTIS_ERROR, 1,
dprintk(MANTIS_ERROR, 1,
"RISC program allocation failed");
mantis_dma_exit(mantis);
goto err;
}
dprintk(verbose, MANTIS_ERROR, 1,
dprintk(MANTIS_ERROR, 1,
"RISC=0x%lx cpu=0x%p size=%lx",
(unsigned long) mantis->risc_dma,
mantis->risc_cpu, MANTIS_RISC_SIZE);
......@@ -103,7 +120,7 @@ static inline int mantis_alloc_buffers(struct mantis_pci *mantis)
return 0;
err:
dprintk(verbose, MANTIS_ERROR, 1, "Out of memory (?) .....");
dprintk(MANTIS_ERROR, 1, "Out of memory (?) .....");
return -ENOMEM;
}
......@@ -117,12 +134,11 @@ static inline int mantis_calc_lines(struct mantis_pci *mantis)
mantis->line_count <<= 1;
}
dprintk(verbose, MANTIS_DEBUG, 1,
"Mantis RISC block bytes=[%d], line bytes=[%d], line count=[%d]",
dprintk(MANTIS_DEBUG, 1, "Mantis RISC block bytes=[%d], line bytes=[%d], line count=[%d]",
MANTIS_BLOCK_BYTES, mantis->line_bytes, mantis->line_count);
if (mantis->line_count > 255) {
dprintk(verbose, MANTIS_ERROR, 1, "Buffer size error");
dprintk(MANTIS_ERROR, 1, "Buffer size error");
return -EINVAL;
}
......@@ -133,9 +149,9 @@ int mantis_dma_init(struct mantis_pci *mantis)
{
int err = 0;
dprintk(verbose, MANTIS_DEBUG, 1, "Mantis DMA init");
dprintk(MANTIS_DEBUG, 1, "Mantis DMA init");
if (mantis_alloc_buffers(mantis) < 0) {
dprintk(verbose, MANTIS_ERROR, 1, "Error allocating DMA buffer");
dprintk(MANTIS_ERROR, 1, "Error allocating DMA buffer");
// Stop RISC Engine
// mmwrite(mmread(MANTIS_DMA_CTL) & ~MANTIS_RISC_EN, MANTIS_DMA_CTL);
......@@ -144,7 +160,7 @@ int mantis_dma_init(struct mantis_pci *mantis)
goto err;
}
if ((err = mantis_calc_lines(mantis)) < 0) {
dprintk(verbose, MANTIS_ERROR, 1, "Mantis calc lines failed");
dprintk(MANTIS_ERROR, 1, "Mantis calc lines failed");
goto err;
}
......@@ -153,20 +169,21 @@ int mantis_dma_init(struct mantis_pci *mantis)
err:
return err;
}
EXPORT_SYMBOL_GPL(mantis_dma_init);
static inline void mantis_risc_program(struct mantis_pci *mantis)
{
u32 buf_pos = 0;
u32 line;
dprintk(verbose, MANTIS_DEBUG, 1, "Mantis create RISC program");
dprintk(MANTIS_DEBUG, 1, "Mantis create RISC program");
RISC_FLUSH();
dprintk(verbose, MANTIS_DEBUG, 1, "risc len lines %u, bytes per line %u",
dprintk(MANTIS_DEBUG, 1, "risc len lines %u, bytes per line %u",
mantis->line_count, mantis->line_bytes);
for (line = 0; line < mantis->line_count; line++) {
dprintk(verbose, MANTIS_DEBUG, 1, "RISC PROG line=[%d]", line);
dprintk(MANTIS_DEBUG, 1, "RISC PROG line=[%d]", line);
if (!(buf_pos % MANTIS_BLOCK_BYTES)) {
RISC_INSTR(RISC_WRITE |
RISC_IRQ |
......@@ -186,7 +203,7 @@ static inline void mantis_risc_program(struct mantis_pci *mantis)
void mantis_dma_start(struct mantis_pci *mantis)
{
dprintk(verbose, MANTIS_DEBUG, 1, "Mantis Start DMA engine");
dprintk(MANTIS_DEBUG, 1, "Mantis Start DMA engine");
mantis_risc_program(mantis);
mmwrite(mantis->risc_dma, MANTIS_RISC_START);
......@@ -208,7 +225,7 @@ void mantis_dma_stop(struct mantis_pci *mantis)
stat = mmread(MANTIS_INT_STAT);
mask = mmread(MANTIS_INT_MASK);
dprintk(verbose, MANTIS_DEBUG, 1, "Mantis Stop DMA engine");
dprintk(MANTIS_DEBUG, 1, "Mantis Stop DMA engine");
mmwrite((mmread(MANTIS_GPIF_ADDR) & (~(MANTIS_GPIF_HIFRDWRN))), MANTIS_GPIF_ADDR);
......@@ -229,7 +246,7 @@ void mantis_dma_xfer(unsigned long data)
struct mantis_hwconfig *config = mantis->hwconfig;
while (mantis->last_block != mantis->finished_block) {
dprintk(verbose, MANTIS_DEBUG, 1, "last block=[%d] finished block=[%d]",
dprintk(MANTIS_DEBUG, 1, "last block=[%d] finished block=[%d]",
mantis->last_block, mantis->finished_block);
(config->ts_size ? dvb_dmx_swfilter_204: dvb_dmx_swfilter)
......
#ifndef __MANTIS_DMA_H
#define __MANTIS_DMA_H
extern int mantis_dma_init(struct mantis_pci *mantis);
extern int mantis_dma_exit(struct mantis_pci *mantis);
extern void mantis_dma_start(struct mantis_pci *mantis);
extern void mantis_dma_stop(struct mantis_pci *mantis);
extern void mantis_dma_xfer(unsigned long data);
#endif /* __MANTIS_DMA_H */
This diff is collapsed.
#ifndef __MANTIS_DVB_H
#define __MANTIS_DVB_H
enum mantis_power {
POWER_OFF = 0,
POWER_ON = 1
};
extern int mantis_frontend_power(struct mantis_pci *mantis, enum mantis_power power);
extern void mantis_frontend_soft_reset(struct mantis_pci *mantis);
extern int mantis_dvb_init(struct mantis_pci *mantis);
extern int mantis_dvb_exit(struct mantis_pci *mantis);
#endif /* __MANTIS_DVB_H */
......@@ -18,9 +18,23 @@
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/kernel.h>
#include <asm/irq.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include "dmxdev.h"
#include "dvbdev.h"
#include "dvb_demux.h"
#include "dvb_frontend.h"
#include "dvb_net.h"
#include "mantis_common.h"
#include "mantis_link.h"
#include "mantis_hif.h"
#include "mantis_reg.h"
static void mantis_hifevm_work(struct work_struct *work)
{
......@@ -34,7 +48,7 @@ static void mantis_hifevm_work(struct work_struct *work)
if (gpif_stat & MANTIS_GPIF_DETSTAT) {
if (gpif_stat & MANTIS_CARD_PLUGIN) {
dprintk(verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): CAM Plugin", mantis->num);
dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): CAM Plugin", mantis->num);
mmwrite(0xdada0000, MANTIS_CARD_RESET);
mantis_event_cam_plugin(ca);
dvb_ca_en50221_camchange_irq(&ca->en50221,
......@@ -43,7 +57,7 @@ static void mantis_hifevm_work(struct work_struct *work)
}
} else {
if (gpif_stat & MANTIS_CARD_PLUGOUT) {
dprintk(verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): CAM Unplug", mantis->num);
dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): CAM Unplug", mantis->num);
mmwrite(0xdada0000, MANTIS_CARD_RESET);
mantis_event_cam_unplug(ca);
dvb_ca_en50221_camchange_irq(&ca->en50221,
......@@ -53,28 +67,28 @@ static void mantis_hifevm_work(struct work_struct *work)
}
if (mantis->gpif_status & MANTIS_GPIF_EXTIRQ)
dprintk(verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Ext IRQ", mantis->num);
dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Ext IRQ", mantis->num);
if (mantis->gpif_status & MANTIS_SBUF_WSTO)
dprintk(verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Timeout", mantis->num);
dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Timeout", mantis->num);
if (mantis->gpif_status & MANTIS_GPIF_OTHERR)
dprintk(verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Alignment Error", mantis->num);
dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Alignment Error", mantis->num);
if (gpif_stat & MANTIS_SBUF_OVFLW)
dprintk(verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Overflow", mantis->num);
dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Overflow", mantis->num);
if (gpif_stat & MANTIS_GPIF_BRRDY)
dprintk(verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Read Ready", mantis->num);
dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Read Ready", mantis->num);
if (gpif_stat & MANTIS_GPIF_INTSTAT)
dprintk(verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): GPIF IRQ", mantis->num);
dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): GPIF IRQ", mantis->num);
if (gpif_stat & MANTIS_SBUF_EMPTY)
dprintk(verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Empty", mantis->num);
dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Empty", mantis->num);
if (gpif_stat & MANTIS_SBUF_OPDONE) {
dprintk(verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer operation complete", mantis->num);
dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer operation complete", mantis->num);
ca->sbuf_status = MANTIS_SBUF_DATA_AVAIL;
ca->hif_event = MANTIS_SBUF_OPDONE;
wake_up(&ca->hif_opdone_wq);
......@@ -85,7 +99,7 @@ int mantis_evmgr_init(struct mantis_ca *ca)
{
struct mantis_pci *mantis = ca->ca_priv;
dprintk(verbose, MANTIS_DEBUG, 1, "Initializing Mantis Host I/F Event manager");
dprintk(MANTIS_DEBUG, 1, "Initializing Mantis Host I/F Event manager");
INIT_WORK(&ca->hif_evm_work, mantis_hifevm_work);
mantis_pcmcia_init(ca);
schedule_work(&ca->hif_evm_work);
......@@ -97,7 +111,7 @@ void mantis_evmgr_exit(struct mantis_ca *ca)
{
struct mantis_pci *mantis = ca->ca_priv;
dprintk(verbose, MANTIS_DEBUG, 1, "Mantis Host I/F Event manager exiting");
dprintk(MANTIS_DEBUG, 1, "Mantis Host I/F Event manager exiting");
flush_scheduled_work();
mantis_hif_exit(ca);
mantis_pcmcia_exit(ca);
......
......@@ -18,10 +18,28 @@
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/kernel.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <asm/irq.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include "dmxdev.h"
#include "dvbdev.h"
#include "dvb_demux.h"
#include "dvb_frontend.h"
#include "dvb_net.h"
#include "mantis_common.h"
#include "mantis_hif.h"
#include "mantis_link.h" /* temporary due to physical layer stuff */
#include "mantis_reg.h"
static int mantis_hif_data_available(struct mantis_ca *ca)
{
struct mantis_pci *mantis = ca->ca_priv;
......@@ -31,7 +49,7 @@ static int mantis_hif_data_available(struct mantis_ca *ca)
ca->sbuf_status & MANTIS_SBUF_DATA_AVAIL,
msecs_to_jiffies(500)) == -ERESTARTSYS) {
dprintk(verbose, MANTIS_ERROR, 1, "Adapter(%d) Slot(0): HIF Read wait event timeout !", mantis->num);
dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): HIF Read wait event timeout !", mantis->num);
rc = -EREMOTEIO;
}
ca->sbuf_status &= ~MANTIS_SBUF_DATA_AVAIL;
......@@ -48,10 +66,10 @@ static int mantis_hif_sbuf_opdone_wait(struct mantis_ca *ca)
ca->hif_event & MANTIS_SBUF_OPDONE,
msecs_to_jiffies(500)) == -ERESTARTSYS) {
dprintk(verbose, MANTIS_ERROR, 1, "Adapter(%d) Slot(0): Smart buffer operation timeout !", mantis->num);
dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): Smart buffer operation timeout !", mantis->num);
rc = -EREMOTEIO;
}
dprintk(verbose, MANTIS_DEBUG, 1, "Smart Buffer Operation complete");
dprintk(MANTIS_DEBUG, 1, "Smart Buffer Operation complete");
ca->hif_event &= ~MANTIS_SBUF_OPDONE;
return rc;
}
......@@ -66,22 +84,22 @@ static int mantis_hif_write_wait(struct mantis_ca *ca)
mantis->gpif_status & MANTIS_GPIF_WRACK,
msecs_to_jiffies(500)) == -ERESTARTSYS) {
dprintk(verbose, MANTIS_ERROR, 1, "Adapter(%d) Slot(0): Write ACK timed out !", mantis->num);
dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): Write ACK timed out !", mantis->num);
rc = -EREMOTEIO;
}
dprintk(verbose, MANTIS_DEBUG, 1, "Write Acknowledged");
dprintk(MANTIS_DEBUG, 1, "Write Acknowledged");
mantis->gpif_status &= ~MANTIS_GPIF_WRACK;
while (!opdone) {
opdone = (mmread(MANTIS_GPIF_STATUS) & MANTIS_SBUF_OPDONE);
udelay(500);
timeout++;
if (timeout > 100) {
dprintk(verbose, MANTIS_ERROR, 1, "Adater(%d) Slot(0): Write operation timed out!", mantis->num);
dprintk(MANTIS_ERROR, 1, "Adater(%d) Slot(0): Write operation timed out!", mantis->num);
rc = -ETIMEDOUT;
break;
}
}
dprintk(verbose, MANTIS_DEBUG, 1, "HIF Write success");
dprintk(MANTIS_DEBUG, 1, "HIF Write success");
return rc;
}
......@@ -91,7 +109,7 @@ int mantis_hif_read_mem(struct mantis_ca *ca, u32 addr)
struct mantis_pci *mantis = ca->ca_priv;
u32 hif_addr = 0, data, count = 4;
dprintk(verbose, MANTIS_DEBUG, 1, "Adapter(%d) Slot(0): Request HIF Mem Read", mantis->num);
dprintk(MANTIS_DEBUG, 1, "Adapter(%d) Slot(0): Request HIF Mem Read", mantis->num);
mutex_lock(&ca->ca_lock);
hif_addr &= ~MANTIS_GPIF_PCMCIAREG;
hif_addr &= ~MANTIS_GPIF_PCMCIAIOM;
......@@ -104,13 +122,13 @@ int mantis_hif_read_mem(struct mantis_ca *ca, u32 addr)
mmwrite(hif_addr | MANTIS_GPIF_HIFRDWRN, MANTIS_GPIF_ADDR);
if (mantis_hif_sbuf_opdone_wait(ca) != 0) {
dprintk(verbose, MANTIS_ERROR, 1, "Adapter(%d) Slot(0): GPIF Smart Buffer operation failed", mantis->num);
dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): GPIF Smart Buffer operation failed", mantis->num);
mutex_unlock(&ca->ca_lock);
return -EREMOTEIO;
}
data = mmread(MANTIS_GPIF_DIN);
mutex_unlock(&ca->ca_lock);
dprintk(verbose, MANTIS_DEBUG, 1, "Mem Read: 0x%02x", data);
dprintk(MANTIS_DEBUG, 1, "Mem Read: 0x%02x", data);
return (data >> 24) & 0xff;
}
......@@ -120,7 +138,7 @@ int mantis_hif_write_mem(struct mantis_ca *ca, u32 addr, u8 data)
struct mantis_pci *mantis = ca->ca_priv;
u32 hif_addr = 0;
dprintk(verbose, MANTIS_DEBUG, 1, "Adapter(%d) Slot(0): Request HIF Mem Write", mantis->num);
dprintk(MANTIS_DEBUG, 1, "Adapter(%d) Slot(0): Request HIF Mem Write", mantis->num);
mutex_lock(&ca->ca_lock);
hif_addr &= ~MANTIS_GPIF_HIFRDWRN;
hif_addr &= ~MANTIS_GPIF_PCMCIAREG;
......@@ -133,11 +151,11 @@ int mantis_hif_write_mem(struct mantis_ca *ca, u32 addr, u8 data)
mmwrite(data, MANTIS_GPIF_DOUT);
if (mantis_hif_write_wait(ca) != 0) {
dprintk(verbose, MANTIS_ERROR, 1, "Adapter(%d) Slot(0): HIF Smart Buffer operation failed", mantis->num);
dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): HIF Smart Buffer operation failed", mantis->num);
mutex_unlock(&ca->ca_lock);
return -EREMOTEIO;
}
dprintk(verbose, MANTIS_DEBUG, 1, "Mem Write: (0x%02x to 0x%02x)", data, addr);
dprintk(MANTIS_DEBUG, 1, "Mem Write: (0x%02x to 0x%02x)", data, addr);
mutex_unlock(&ca->ca_lock);
return 0;
......@@ -148,7 +166,7 @@ int mantis_hif_read_iom(struct mantis_ca *ca, u32 addr)
struct mantis_pci *mantis = ca->ca_priv;
u32 data, hif_addr = 0;
dprintk(verbose, MANTIS_DEBUG, 1, "Adapter(%d) Slot(0): Request HIF I/O Read", mantis->num);
dprintk(MANTIS_DEBUG, 1, "Adapter(%d) Slot(0): Request HIF I/O Read", mantis->num);
mutex_lock(&ca->ca_lock);
hif_addr &= ~MANTIS_GPIF_PCMCIAREG;
hif_addr |= MANTIS_GPIF_PCMCIAIOM;
......@@ -161,12 +179,12 @@ int mantis_hif_read_iom(struct mantis_ca *ca, u32 addr)
mmwrite(hif_addr | MANTIS_GPIF_HIFRDWRN, MANTIS_GPIF_ADDR);
if (mantis_hif_sbuf_opdone_wait(ca) != 0) {
dprintk(verbose, MANTIS_ERROR, 1, "Adapter(%d) Slot(0): HIF Smart Buffer operation failed", mantis->num);
dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): HIF Smart Buffer operation failed", mantis->num);
mutex_unlock(&ca->ca_lock);
return -EREMOTEIO;
}
data = mmread(MANTIS_GPIF_DIN);
dprintk(verbose, MANTIS_DEBUG, 1, "I/O Read: 0x%02x", data);
dprintk(MANTIS_DEBUG, 1, "I/O Read: 0x%02x", data);
udelay(50);
mutex_unlock(&ca->ca_lock);
......@@ -178,7 +196,7 @@ int mantis_hif_write_iom(struct mantis_ca *ca, u32 addr, u8 data)
struct mantis_pci *mantis = ca->ca_priv;
u32 hif_addr = 0;
dprintk(verbose, MANTIS_DEBUG, 1, "Adapter(%d) Slot(0): Request HIF I/O Write", mantis->num);
dprintk(MANTIS_DEBUG, 1, "Adapter(%d) Slot(0): Request HIF I/O Write", mantis->num);
mutex_lock(&ca->ca_lock);
hif_addr &= ~MANTIS_GPIF_PCMCIAREG;
hif_addr &= ~MANTIS_GPIF_HIFRDWRN;
......@@ -190,11 +208,11 @@ int mantis_hif_write_iom(struct mantis_ca *ca, u32 addr, u8 data)
mmwrite(data, MANTIS_GPIF_DOUT);
if (mantis_hif_write_wait(ca) != 0) {
dprintk(verbose, MANTIS_ERROR, 1, "Adapter(%d) Slot(0): HIF Smart Buffer operation failed", mantis->num);
dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): HIF Smart Buffer operation failed", mantis->num);
mutex_unlock(&ca->ca_lock);
return -EREMOTEIO;
}
dprintk(verbose, MANTIS_DEBUG, 1, "I/O Write: (0x%02x to 0x%02x)", data, addr);
dprintk(MANTIS_DEBUG, 1, "I/O Write: (0x%02x to 0x%02x)", data, addr);
mutex_unlock(&ca->ca_lock);
udelay(50);
......@@ -208,7 +226,7 @@ int mantis_hif_init(struct mantis_ca *ca)
u32 irqcfg;
slot[0].slave_cfg = 0x70773028;
dprintk(verbose, MANTIS_ERROR, 1, "Adapter(%d) Initializing Mantis Host Interface", mantis->num);
dprintk(MANTIS_ERROR, 1, "Adapter(%d) Initializing Mantis Host Interface", mantis->num);
mutex_lock(&ca->ca_lock);
irqcfg = mmread(MANTIS_GPIF_IRQCFG);
......@@ -230,7 +248,7 @@ void mantis_hif_exit(struct mantis_ca *ca)
struct mantis_pci *mantis = ca->ca_priv;
u32 irqcfg;
dprintk(verbose, MANTIS_ERROR, 1, "Adapter(%d) Exiting Mantis Host Interface", mantis->num);
dprintk(MANTIS_ERROR, 1, "Adapter(%d) Exiting Mantis Host Interface", mantis->num);
mutex_lock(&ca->ca_lock);
irqcfg = mmread(MANTIS_GPIF_IRQCFG);
irqcfg &= ~MANTIS_MASK_BRRDY;
......
......@@ -26,4 +26,4 @@
#define MANTIS_HIF_IOMRD 3
#define MANTIS_HIF_IOMWR 4
#endif // __MANTIS_HIF_H
#endif /* __MANTIS_HIF_H */
......@@ -18,15 +18,20 @@
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <asm/io.h>
#include <linux/ioport.h>
#include <asm/pgtable.h>
#include <asm/page.h>
#include <linux/pci.h>
#include <linux/i2c.h>
#include "dmxdev.h"
#include "dvbdev.h"
#include "dvb_demux.h"
#include "dvb_frontend.h"
#include "dvb_net.h"
#include "mantis_common.h"
#include "mantis_reg.h"
#include "mantis_i2c.h"
#define I2C_HW_B_MANTIS 0x1c
......@@ -35,20 +40,21 @@ static int mantis_ack_wait(struct mantis_pci *mantis)
int rc = 0;
u32 timeout = 0;
if (wait_event_interruptible_timeout(mantis->i2c_wq,
mantis->mantis_int_stat & MANTIS_INT_I2CDONE,
msecs_to_jiffies(50)) == -ERESTARTSYS) {
if (wait_event_timeout(mantis->i2c_wq,
mantis->mantis_int_stat & MANTIS_INT_I2CDONE,
msecs_to_jiffies(50)) == -ERESTARTSYS) {
dprintk(verbose, MANTIS_DEBUG, 1, "Master !I2CDONE");
dprintk(MANTIS_DEBUG, 1, "Master !I2CDONE");
rc = -EREMOTEIO;
}
while (!(mantis->mantis_int_stat & MANTIS_INT_I2CRACK)) {
dprintk(verbose, MANTIS_DEBUG, 1, "Waiting for Slave RACK");
dprintk(MANTIS_DEBUG, 1, "Waiting for Slave RACK");
mantis->mantis_int_stat = mmread(MANTIS_INT_STAT);
msleep(5);
timeout++;
if (timeout > 500) {
dprintk(verbose, MANTIS_ERROR, 1, "Slave RACK Fail !");
dprintk(MANTIS_ERROR, 1, "Slave RACK Fail !");
rc = -EREMOTEIO;
break;
}
......@@ -62,7 +68,7 @@ static int mantis_i2c_read(struct mantis_pci *mantis, const struct i2c_msg *msg)
{
u32 rxd, i;
dprintk(verbose, MANTIS_INFO, 0, " %s: Address=[0x%02x] <R>[ ",
dprintk(MANTIS_INFO, 0, " %s: Address=[0x%02x] <R>[ ",
__func__, msg->addr);
for (i = 0; i < msg->len; i++) {
......@@ -77,14 +83,14 @@ static int mantis_i2c_read(struct mantis_pci *mantis, const struct i2c_msg *msg)
mmwrite(MANTIS_INT_I2CDONE, MANTIS_INT_STAT);
mmwrite(rxd, MANTIS_I2CDATA_CTL);
if (mantis_ack_wait(mantis) != 0) {
dprintk(verbose, MANTIS_DEBUG, 1, "ACK failed<R>");
dprintk(MANTIS_DEBUG, 1, "ACK failed<R>");
return -EREMOTEIO;
}
rxd = mmread(MANTIS_I2CDATA_CTL);
msg->buf[i] = (u8)((rxd >> 8) & 0xFF);
dprintk(verbose, MANTIS_INFO, 0, "%02x ", msg->buf[i]);
dprintk(MANTIS_INFO, 0, "%02x ", msg->buf[i]);
}
dprintk(verbose, MANTIS_INFO, 0, "]\n");
dprintk(MANTIS_INFO, 0, "]\n");
return 0;
}
......@@ -94,11 +100,11 @@ static int mantis_i2c_write(struct mantis_pci *mantis, const struct i2c_msg *msg
int i;
u32 txd = 0;
dprintk(verbose, MANTIS_INFO, 0, " %s: Address=[0x%02x] <W>[ ",
dprintk(MANTIS_INFO, 0, " %s: Address=[0x%02x] <W>[ ",
__func__, msg->addr);
for (i = 0; i < msg->len; i++) {
dprintk(verbose, MANTIS_INFO, 0, "%02x ", msg->buf[i]);
dprintk(MANTIS_INFO, 0, "%02x ", msg->buf[i]);
txd = (msg->addr << 25) | (msg->buf[i] << 8)
| MANTIS_I2C_RATE_3
| MANTIS_I2C_STOP
......@@ -110,11 +116,11 @@ static int mantis_i2c_write(struct mantis_pci *mantis, const struct i2c_msg *msg
mmwrite(MANTIS_INT_I2CDONE, MANTIS_INT_STAT);
mmwrite(txd, MANTIS_I2CDATA_CTL);
if (mantis_ack_wait(mantis) != 0) {
dprintk(verbose, MANTIS_DEBUG, 1, "ACK failed<W>");
dprintk(MANTIS_DEBUG, 1, "ACK failed<W>");
return -EREMOTEIO;
}
}
dprintk(verbose, MANTIS_INFO, 0, "]\n");
dprintk(MANTIS_INFO, 0, "]\n");
return 0;
}
......@@ -154,43 +160,46 @@ static struct i2c_algorithm mantis_algo = {
.functionality = mantis_i2c_func,
};
static struct i2c_adapter mantis_i2c_adapter = {
.owner = THIS_MODULE,
.name = "Mantis I2C",
.id = I2C_HW_B_MANTIS,
.class = I2C_CLASS_TV_DIGITAL,
.algo = &mantis_algo,
};
int __devinit mantis_i2c_init(struct mantis_pci *mantis)
{
u32 intstat, intmask;
struct i2c_adapter *i2c_adapter = &mantis->adapter;
struct pci_dev *pdev = mantis->pdev;
init_waitqueue_head(&mantis->i2c_wq);
mutex_init(&mantis->i2c_lock);
memcpy(i2c_adapter, &mantis_i2c_adapter, sizeof (mantis_i2c_adapter));
strncpy(i2c_adapter->name, "Mantis I2C", sizeof (i2c_adapter->name));
i2c_set_adapdata(i2c_adapter, mantis);
i2c_adapter->dev.parent = &pdev->dev;
i2c_adapter->owner = THIS_MODULE;
i2c_adapter->class = I2C_CLASS_TV_DIGITAL;
i2c_adapter->algo = &mantis_algo;
i2c_adapter->algo_data = NULL;
i2c_adapter->id = I2C_HW_B_MANTIS;
i2c_adapter->timeout = 500;
i2c_adapter->retries = 3;
i2c_adapter->dev.parent = &pdev->dev;
mantis->i2c_rc = i2c_add_adapter(i2c_adapter);
if (mantis->i2c_rc < 0)
return mantis->i2c_rc;
dprintk(verbose, MANTIS_DEBUG, 1, "Initializing I2C ..");
dprintk(MANTIS_DEBUG, 1, "Initializing I2C ..");
intstat = mmread(MANTIS_INT_STAT);
intmask = mmread(MANTIS_INT_MASK);
mmwrite(intstat, MANTIS_INT_STAT);
mmwrite(intmask | MANTIS_INT_I2CDONE, MANTIS_INT_MASK);
dprintk(verbose, MANTIS_DEBUG, 1, "[0x%08x/%08x]", intstat, intmask);
dprintk(MANTIS_DEBUG, 1, "Status=<%02x> Mask=<%02x>", intstat, intmask);
return 0;
}
EXPORT_SYMBOL_GPL(mantis_i2c_init);
int __devexit mantis_i2c_exit(struct mantis_pci *mantis)
{
dprintk(verbose, MANTIS_DEBUG, 1, "Removing I2C adapter");
dprintk(MANTIS_DEBUG, 1, "Removing I2C adapter");
return i2c_del_adapter(&mantis->adapter);
}
EXPORT_SYMBOL_GPL(mantis_i2c_exit);
#ifndef __MANTIS_I2C_H
#define __MANTIS_I2C_H
extern int mantis_i2c_init(struct mantis_pci *mantis);
extern int mantis_i2c_exit(struct mantis_pci *mantis);
#endif /* __MANTIS_I2C_H */
/*
Mantis PCI bridge driver
Copyright (C) 2005, 2006 Manu Abraham (abraham.manu@gmail.com)
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/kernel.h>
#include <linux/i2c.h>
#include <asm/irq.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include "dmxdev.h"
#include "dvbdev.h"
#include "dvb_demux.h"
#include "dvb_frontend.h"
#include "dvb_net.h"
#include "mantis_common.h"
#include "mantis_reg.h"
#include "mantis_ioc.h"
static int read_eeprom_byte(struct mantis_pci *mantis, u8 *data, u8 length)
{
struct i2c_adapter *adapter = &mantis->adapter;
int err;
struct i2c_msg msg[] = {
{ .addr = 0x50, .flags = 0, .buf = data, .len = 1 },
{ .addr = 0x50, .flags = I2C_M_RD, .buf = data, .len = length },
};
err = i2c_transfer(adapter, msg, 2);
if (err < 0) {
dprintk(MANTIS_ERROR, 1, "ERROR: i2c read: < err=%i d0=0x%02x d1=0x%02x >",
err, data[0], data[1]);
return err;
}
return 0;
}
static int write_eeprom_byte(struct mantis_pci *mantis, u8 *data, u8 length)
{
struct i2c_adapter *adapter = &mantis->adapter;
int err;
struct i2c_msg msg = { .addr = 0x50, .flags = 0, .buf = data, .len = length };
err = i2c_transfer(adapter, &msg, 1);
if (err < 0) {
dprintk(MANTIS_ERROR, 1, "ERROR: i2c write: < err=%i length=0x%02x d0=0x%02x, d1=0x%02x >",
err, length, data[0], data[1]);
return err;
}
return 0;
}
int mantis_get_mac(struct mantis_pci *mantis)
{
int err;
mantis->mac_address[0] = 0x08;
err = read_eeprom_byte(mantis, &mantis->mac_address[0], 6);
if (err < 0) {
dprintk(MANTIS_ERROR, 1, "ERROR: Mantis EEPROM read error <%d>", err);
return err;
}
dprintk(MANTIS_ERROR, 0,
" MAC Address=[%02x:%02x:%02x:%02x:%02x:%02x]\n",
mantis->mac_address[0], mantis->mac_address[1],
mantis->mac_address[2], mantis->mac_address[3],
mantis->mac_address[4], mantis->mac_address[5]);
return 0;
}
EXPORT_SYMBOL_GPL(mantis_get_mac);
/* Turn the given bit on or off. */
void gpio_set_bits(struct mantis_pci *mantis, u32 bitpos, u8 value)
{
u32 cur;
cur = mmread(MANTIS_GPIF_ADDR);
if (value)
mantis->gpio_status = cur | (1 << bitpos);
else
mantis->gpio_status = cur & (~(1 << bitpos));
mmwrite(mantis->gpio_status, MANTIS_GPIF_ADDR);
mmwrite(0x00, MANTIS_GPIF_DOUT);
}
EXPORT_SYMBOL_GPL(gpio_set_bits);
int mantis_stream_control(struct mantis_pci *mantis, enum mantis_stream_control stream_ctl)
{
u32 reg;
reg = mmread(MANTIS_CONTROL);
switch (stream_ctl) {
case STREAM_TO_HIF:
dprintk(MANTIS_DEBUG, 1, "Set stream to HIF");
reg &= 0xff - MANTIS_BYPASS;
mmwrite(reg, MANTIS_CONTROL);
reg |= MANTIS_BYPASS;
mmwrite(reg, MANTIS_CONTROL);
break;
case STREAM_TO_CAM:
dprintk(MANTIS_DEBUG, 1, "Set stream to CAM");
reg |= MANTIS_BYPASS;
mmwrite(reg, MANTIS_CONTROL);
reg &= 0xff - MANTIS_BYPASS;
mmwrite(reg, MANTIS_CONTROL);
break;
default:
dprintk(MANTIS_ERROR, 1, "Unknown MODE <%02x>", stream_ctl);
return -1;
}
return 0;
}
EXPORT_SYMBOL_GPL(mantis_stream_control);
......@@ -58,7 +58,6 @@ struct mantis_ca {
enum mantis_slot_state slot_state;
// struct dvb_device *ca_dev;
void *ca_priv;
struct dvb_ca_en50221 en50221;
......@@ -81,4 +80,4 @@ extern int mantis_hif_write_mem(struct mantis_ca *ca, u32 addr, u8 data);
extern int mantis_hif_read_iom(struct mantis_ca *ca, u32 addr);
extern int mantis_hif_write_iom(struct mantis_ca *ca, u32 addr, u8 data);
#endif // __MANTIS_LINK_H
#endif /* __MANTIS_LINK_H */
This diff is collapsed.
#ifndef __MANTIS_PCI_H
#define __MANTIS_PCI_H
extern int mantis_pci_init(struct mantis_pci *mantis);
extern void mantis_pci_exit(struct mantis_pci *mantis);
#endif /* __MANTIS_PCI_H */
......@@ -18,8 +18,22 @@
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/kernel.h>
#include <asm/irq.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include "dmxdev.h"
#include "dvbdev.h"
#include "dvb_demux.h"
#include "dvb_frontend.h"
#include "dvb_net.h"
#include "mantis_common.h"
#include "mantis_link.h" /* temporary due to physical layer stuff */
#include "mantis_reg.h"
/*
* If Slot state is already PLUG_IN event and we are called
......@@ -32,7 +46,7 @@ void mantis_event_cam_plugin(struct mantis_ca *ca)
u32 gpif_irqcfg;
if (ca->slot_state == MODULE_XTRACTED) {
dprintk(verbose, MANTIS_DEBUG, 1, "Event: CAM Plugged IN: Adapter(%d) Slot(0)", mantis->num);
dprintk(MANTIS_DEBUG, 1, "Event: CAM Plugged IN: Adapter(%d) Slot(0)", mantis->num);
udelay(50);
mmwrite(0xda000000, MANTIS_CARD_RESET);
gpif_irqcfg = mmread(MANTIS_GPIF_IRQCFG);
......@@ -56,7 +70,7 @@ void mantis_event_cam_unplug(struct mantis_ca *ca)
u32 gpif_irqcfg;
if (ca->slot_state == MODULE_INSERTED) {
dprintk(verbose, MANTIS_DEBUG, 1, "Event: CAM Unplugged: Adapter(%d) Slot(0)", mantis->num);
dprintk(MANTIS_DEBUG, 1, "Event: CAM Unplugged: Adapter(%d) Slot(0)", mantis->num);
udelay(50);
mmwrite(0x00da0000, MANTIS_CARD_RESET);
gpif_irqcfg = mmread(MANTIS_GPIF_IRQCFG);
......@@ -80,14 +94,14 @@ int mantis_pcmcia_init(struct mantis_ca *ca)
card_stat = mmread(MANTIS_GPIF_IRQCFG);
if (gpif_stat & MANTIS_GPIF_DETSTAT) {
dprintk(verbose, MANTIS_DEBUG, 1, "CAM found on Adapter(%d) Slot(0)", mantis->num);
dprintk(MANTIS_DEBUG, 1, "CAM found on Adapter(%d) Slot(0)", mantis->num);
mmwrite(card_stat | MANTIS_MASK_PLUGOUT, MANTIS_GPIF_IRQCFG);
ca->slot_state = MODULE_INSERTED;
dvb_ca_en50221_camchange_irq(&ca->en50221,
0,
DVB_CA_EN50221_CAMCHANGE_INSERTED);
} else {
dprintk(verbose, MANTIS_DEBUG, 1, "Empty Slot on Adapter(%d) Slot(0)", mantis->num);
dprintk(MANTIS_DEBUG, 1, "Empty Slot on Adapter(%d) Slot(0)", mantis->num);
mmwrite(card_stat | MANTIS_MASK_PLUGIN, MANTIS_GPIF_IRQCFG);
ca->slot_state = MODULE_XTRACTED;
dvb_ca_en50221_camchange_irq(&ca->en50221,
......
......@@ -21,7 +21,7 @@
#ifndef __MANTIS_REG_H
#define __MANTIS_REG_H
// Interrupts
/* Interrupts */
#define MANTIS_INT_STAT 0x00
#define MANTIS_INT_MASK 0x04
......@@ -49,8 +49,12 @@
#define MANTIS_INT_RISCI (0x01 << 1)
#define MANTIS_INT_I2CDONE (0x01 << 0)
// DMA
/* DMA */
#define MANTIS_DMA_CTL 0x08
#define MANTIS_GPIF_RD (0xff << 24)
#define MANTIS_GPIF_WR (0xff << 16)
#define MANTIS_CPU_DO (0x01 << 10)
#define MANTIS_DRV_DO (0x01 << 9)
#define MANTIS_I2C_RD (0x01 << 7)
#define MANTIS_I2C_WR (0x01 << 6)
#define MANTIS_DCAP_MODE (0x01 << 5)
......@@ -61,10 +65,16 @@
#define MANTIS_DCAP_EN (0x01 << 1)
#define MANTIS_RISC_EN (0x01 << 0)
/* DEBUG */
#define MANTIS_DEBUGREG 0x0c
#define MANTIS_DATINV (0x0e << 7)
#define MANTIS_TOP_DEBUGSEL (0x07 << 4)
#define MANTIS_PCMCIA_DEBUGSEL (0x0f << 0)
#define MANTIS_RISC_START 0x10
#define MANTIS_RISC_PC 0x14
// I2C
/* I2C */
#define MANTIS_I2CDATA_CTL 0x18
#define MANTIS_I2C_RATE_1 (0x00 << 6)
#define MANTIS_I2C_RATE_2 (0x01 << 6)
......@@ -73,6 +83,28 @@
#define MANTIS_I2C_STOP (0x01 << 5)
#define MANTIS_I2C_PGMODE (0x01 << 3)
/* DATA */
#define MANTIS_CMD_DATA_R1 0x20
#define MANTIS_CMD_DATA_3 (0xff << 24)
#define MANTIS_CMD_DATA_2 (0xff << 16)
#define MANTIS_CMD_DATA_1 (0xff << 8)
#define MANTIS_CMD_DATA_0 (0xff << 0)
#define MANTIS_CMD_DATA_R2 0x24
#define MANTIS_CMD_DATA_7 (0xff << 24)
#define MANTIS_CMD_DATA_6 (0xff << 16)
#define MANTIS_CMD_DATA_5 (0xff << 8)
#define MANTIS_CMD_DATA_4 (0xff << 0)
#define MANTIS_CONTROL 0x28
#define MANTIS_DET (0x01 << 7)
#define MANTIS_DAT_CF_EN (0x01 << 6)
#define MANTIS_ACS (0x03 << 4)
#define MANTIS_VCCEN (0x01 << 3)
#define MANTIS_BYPASS (0x01 << 2)
#define MANTIS_MRST (0x01 << 1)
#define MANTIS_CRST_INT (0x01 << 0)
#define MANTIS_GPIF_CFGSLA 0x84
#define MANTIS_GPIF_WAITSMPL (0x07 << 28)
#define MANTIS_GPIF_BYTEADDRSUB (0x01 << 25)
......@@ -162,4 +194,4 @@
#define MANTIS_GPIF_LOGICRD (0xffff << 16)
#define MANTIS_GPIF_LOGICRW (0xffff << 0)
#endif //__MANTIS_REG_H
#endif /* __MANTIS_REG_H */
#include <linux/kernel.h>
#include <linux/spinlock.h>
#include <asm/irq.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include "dmxdev.h"
#include "dvbdev.h"
#include "dvb_demux.h"
#include "dvb_frontend.h"
#include "dvb_net.h"
#include "mantis_common.h"
#include "mantis_reg.h"
#include "mantis_uart.h"
struct mantis_uart_params {
enum mantis_baud baud_rate;
......@@ -18,20 +33,20 @@ int mantis_uart_read(struct mantis_pci *mantis, u8 *data)
for (i = 0; i < (config->bytes + 1); i++) {
if (stat & MANTIS_UART_RXFIFO_FULL) {
dprintk(verbose, MANTIS_ERROR, 1, "RX Fifo FULL");
dprintk(MANTIS_ERROR, 1, "RX Fifo FULL");
}
data[i] = mmread(MANTIS_UART_RXD) & 0x3f;
stat = mmread(MANTIS_UART_STAT);
dprintk(verbose, MANTIS_DEBUG, 1, "Reading ... <%02x>", data[i] & 0x3f);
dprintk(MANTIS_DEBUG, 1, "Reading ... <%02x>", data[i] & 0x3f);
if (data[i] & (1 << 7)) {
dprintk(verbose, MANTIS_ERROR, 1, "UART framing error");
dprintk(MANTIS_ERROR, 1, "UART framing error");
return -EINVAL;
}
if (data[i] & (1 << 6)) {
dprintk(verbose, MANTIS_ERROR, 1, "UART parity error");
dprintk(MANTIS_ERROR, 1, "UART parity error");
return -EINVAL;
}
}
......@@ -46,14 +61,14 @@ static void mantis_uart_work(struct work_struct *work)
u8 buf[16];
int i;
dprintk(verbose, MANTIS_DEBUG, 1, "UART read");
dprintk(MANTIS_DEBUG, 1, "UART read");
mantis_uart_read(mantis, buf);
dprintk(verbose, MANTIS_DEBUG, 1, "UART: ");
dprintk(MANTIS_DEBUG, 1, "UART: ");
for (i = 0; i < (config->bytes + 1); i++)
dprintk(verbose, MANTIS_DEBUG, 0, "<%02x> ", buf[i]);
dprintk(MANTIS_DEBUG, 0, "<%02x> ", buf[i]);
dprintk(verbose, MANTIS_DEBUG, 0, "\n");
dprintk(MANTIS_DEBUG, 0, "\n");
}
static int mantis_uart_setup(struct mantis_pci *mantis,
......@@ -64,7 +79,7 @@ static int mantis_uart_setup(struct mantis_pci *mantis,
u32 reg;
dprintk(verbose, MANTIS_DEBUG, 1, "Set Parity <%s> Baud Rate <%s>",
dprintk(MANTIS_DEBUG, 1, "Set Parity <%s> Baud Rate <%s>",
parity[params->parity],
rates[params->baud_rate]);
......@@ -102,7 +117,7 @@ int mantis_uart_init(struct mantis_pci *mantis)
struct mantis_hwconfig *config = mantis->hwconfig;
struct mantis_uart_params params;
dprintk(verbose, MANTIS_DEBUG, 1, "Initializing UART ..");
dprintk(MANTIS_DEBUG, 1, "Initializing UART ..");
/* default parity: */
params.baud_rate = config->baud_rate;
params.parity = config->parity;
......@@ -131,9 +146,11 @@ int mantis_uart_init(struct mantis_pci *mantis)
return 0;
}
EXPORT_SYMBOL_GPL(mantis_uart_init);
void mantis_uart_exit(struct mantis_pci *mantis)
{
/* disable interrupt */
mmwrite(mmread(MANTIS_UART_CTL) & 0xffef, MANTIS_UART_CTL);
}
EXPORT_SYMBOL_GPL(mantis_uart_exit);
......@@ -56,4 +56,4 @@ struct mantis_pci;
extern int mantis_uart_init(struct mantis_pci *mantis);
extern void mantis_uart_exit(struct mantis_pci *mantis);
#endif // __MANTIS_UART_H
#endif /* __MANTIS_UART_H */
......@@ -18,6 +18,18 @@
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <asm/irq.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include "dmxdev.h"
#include "dvbdev.h"
#include "dvb_demux.h"
#include "dvb_frontend.h"
#include "dvb_net.h"
#include "stv0299.h"
#include "mantis_common.h"
#include "mantis_vp1033.h"
......@@ -66,47 +78,21 @@ u8 lgtdqcs001f_inittab[] = {
0xff, 0xff,
};
struct stv0299_config lgtdqcs001f_config = {
.demod_address = 0x68,
.inittab = lgtdqcs001f_inittab,
.mclk = 88000000UL,
// .invert = 0,
.invert = 1,
// .enhanced_tuning = 0,
.skip_reinit = 0,
// .lock_output = STV0229_LOCKOUTPUT_0,
.volt13_op0_op1 = STV0299_VOLT13_OP0,
.min_delay_ms = 100,
.set_symbol_rate = lgtdqcs001f_set_symbol_rate,
// .pll_set = lgtdqcs001f_pll_set,
};
#define MANTIS_MODEL_NAME "VP-1033"
#define MANTIS_DEV_TYPE "DVB-S/DSS"
struct mantis_hwconfig vp1033_mantis_config = {
.model_name = MANTIS_MODEL_NAME,
.dev_type = MANTIS_DEV_TYPE,
.ts_size = MANTIS_TS_204,
.baud_rate = MANTIS_BAUD_9600,
.parity = MANTIS_PARITY_NONE,
.bytes = 0,
};
int lgtdqcs001f_tuner_set(struct dvb_frontend *fe,
struct dvb_frontend_parameters *params)
{
struct mantis_pci *mantis = fe->dvb->priv;
struct i2c_adapter *adapter = &mantis->adapter;
u8 buf[4];
u32 div;
struct mantis_pci *mantis = fe->dvb->priv;
struct i2c_msg msg = {
.addr = 0x61,
.flags = 0,
.buf = buf,
.len = sizeof (buf)
};
struct i2c_msg msg = {.addr = 0x61, .flags = 0, .buf = buf, .len = sizeof (buf) };
div = params->frequency / 250;
buf[0] = (div >> 8) & 0x7f;
......@@ -118,8 +104,8 @@ int lgtdqcs001f_tuner_set(struct dvb_frontend *fe,
buf[3] |= 0x04;
else
buf[3] &= ~0x04;
if (i2c_transfer(&mantis->adapter, &msg, 1) < 0) {
dprintk(verbose, MANTIS_ERROR, 1, "Write: I2C Transfer failed");
if (i2c_transfer(adapter, &msg, 1) < 0) {
dprintk(MANTIS_ERROR, 1, "Write: I2C Transfer failed");
return -EIO;
}
msleep_interruptible(100);
......@@ -161,3 +147,49 @@ int lgtdqcs001f_set_symbol_rate(struct dvb_frontend *fe,
return 0;
}
struct stv0299_config lgtdqcs001f_config = {
.demod_address = 0x68,
.inittab = lgtdqcs001f_inittab,
.mclk = 88000000UL,
.invert = 0,
.skip_reinit = 0,
.volt13_op0_op1 = STV0299_VOLT13_OP0,
.min_delay_ms = 100,
.set_symbol_rate = lgtdqcs001f_set_symbol_rate,
};
static int vp1033_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe)
{
struct i2c_adapter *adapter = &mantis->adapter;
dprintk(MANTIS_ERROR, 1, "Probing for STV0299 (DVB-S)");
fe = stv0299_attach(&lgtdqcs001f_config, adapter);
if (fe) {
fe->ops.tuner_ops.set_params = lgtdqcs001f_tuner_set;
dprintk(MANTIS_ERROR, 1, "found STV0299 DVB-S frontend @ 0x%02x",
lgtdqcs001f_config.demod_address);
dprintk(MANTIS_ERROR, 1, "Mantis DVB-S STV0299 frontend attach success");
} else {
return -1;
}
mantis->fe = fe;
dprintk(MANTIS_ERROR, 1, "Done!");
return 0;
}
struct mantis_hwconfig vp1033_config = {
.model_name = MANTIS_MODEL_NAME,
.dev_type = MANTIS_DEV_TYPE,
.ts_size = MANTIS_TS_204,
.baud_rate = MANTIS_BAUD_9600,
.parity = MANTIS_PARITY_NONE,
.bytes = 0,
.frontend_init = vp1033_frontend_init,
};
......@@ -21,19 +21,10 @@
#ifndef __MANTIS_VP1033_H
#define __MANTIS_VP1033_H
#include "dvb_frontend.h"
#include "mantis_common.h"
#include "stv0299.h"
#define MANTIS_VP_1033_DVB_S 0x0016
extern struct stv0299_config lgtdqcs001f_config;
extern struct mantis_hwconfig vp1033_mantis_config;
extern struct mantis_hwconfig vp1033_config;
extern int lgtdqcs001f_tuner_set(struct dvb_frontend *fe,
struct dvb_frontend_parameters *params);
extern int lgtdqcs001f_set_symbol_rate(struct dvb_frontend *fe, u32 srate, u32 ratio);
#endif // __MANTIS_VP1033_H
#endif /* __MANTIS_VP1033_H */
......@@ -18,10 +18,24 @@
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <asm/irq.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include "dmxdev.h"
#include "dvbdev.h"
#include "dvb_demux.h"
#include "dvb_frontend.h"
#include "dvb_net.h"
#include "mb86a16.h"
#include "mantis_common.h"
#include "mantis_ioc.h"
#include "mantis_vp1034.h"
#include "mantis_reg.h"
struct mb86a16_config vp1034_config = {
struct mb86a16_config vp1034_mb86a16_config = {
.demod_address = 0x08,
.set_voltage = vp1034_set_voltage,
};
......@@ -29,38 +43,62 @@ struct mb86a16_config vp1034_config = {
#define MANTIS_MODEL_NAME "VP-1034"
#define MANTIS_DEV_TYPE "DVB-S/DSS"
struct mantis_hwconfig vp1034_mantis_config = {
.model_name = MANTIS_MODEL_NAME,
.dev_type = MANTIS_DEV_TYPE,
.ts_size = MANTIS_TS_204,
.baud_rate = MANTIS_BAUD_9600,
.parity = MANTIS_PARITY_NONE,
.bytes = 0,
};
int vp1034_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
{
struct mantis_pci *mantis = fe->dvb->priv;
switch (voltage) {
case SEC_VOLTAGE_13:
dprintk(verbose, MANTIS_ERROR, 1, "Polarization=[13V]");
dprintk(MANTIS_ERROR, 1, "Polarization=[13V]");
gpio_set_bits(mantis, 13, 1);
gpio_set_bits(mantis, 14, 0);
break;
case SEC_VOLTAGE_18:
dprintk(verbose, MANTIS_ERROR, 1, "Polarization=[18V]");
dprintk(MANTIS_ERROR, 1, "Polarization=[18V]");
gpio_set_bits(mantis, 13, 1);
gpio_set_bits(mantis, 14, 1);
break;
case SEC_VOLTAGE_OFF:
dprintk(verbose, MANTIS_ERROR, 1, "Frontend (dummy) POWERDOWN");
dprintk(MANTIS_ERROR, 1, "Frontend (dummy) POWERDOWN");
break;
default:
dprintk(verbose, MANTIS_ERROR, 1, "Invalid = (%d)", (u32 ) voltage);
dprintk(MANTIS_ERROR, 1, "Invalid = (%d)", (u32 ) voltage);
return -EINVAL;
}
mmwrite(0x00, MANTIS_GPIF_DOUT);
return 0;
}
static int vp1034_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe)
{
struct i2c_adapter *adapter = &mantis->adapter;
dprintk(MANTIS_ERROR, 1, "Probing for MB86A16 (DVB-S/DSS)");
fe = mb86a16_attach(&vp1034_mb86a16_config, adapter);
if (fe) {
dprintk(MANTIS_ERROR, 1,
"found MB86A16 DVB-S/DSS frontend @0x%02x",
vp1034_mb86a16_config.demod_address);
} else {
return -1;
}
mantis->fe = fe;
dprintk(MANTIS_ERROR, 1, "Done!");
return 0;
}
struct mantis_hwconfig vp1034_config = {
.model_name = MANTIS_MODEL_NAME,
.dev_type = MANTIS_DEV_TYPE,
.ts_size = MANTIS_TS_204,
.baud_rate = MANTIS_BAUD_9600,
.parity = MANTIS_PARITY_NONE,
.bytes = 0,
.frontend_init = vp1034_frontend_init,
};
......@@ -23,13 +23,11 @@
#include "dvb_frontend.h"
#include "mantis_common.h"
#include "mb86a16.h"
#define MANTIS_VP_1034_DVB_S 0x0014
extern struct mantis_hwconfig vp1034_mantis_config;
extern struct mb86a16_config vp1034_config;
extern struct mantis_hwconfig vp1034_config;
extern int vp1034_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage);
#endif // __MANTIS_VP1034_H
#endif /* __MANTIS_VP1034_H */
......@@ -18,24 +18,31 @@
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <asm/irq.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include "dmxdev.h"
#include "dvbdev.h"
#include "dvb_demux.h"
#include "dvb_frontend.h"
#include "dvb_net.h"
#include "mantis_common.h"
#include "mantis_ioc.h"
#include "mantis_dvb.h"
#include "mantis_vp1041.h"
#include "stb0899_reg.h"
#include "stb0899_drv.h"
#include "stb0899_cfg.h"
#include "stb6100_cfg.h"
#include "stb6100.h"
#include "lnbp21.h"
#define MANTIS_MODEL_NAME "VP-1041"
#define MANTIS_DEV_TYPE "DSS/DVB-S/DVB-S2"
struct mantis_hwconfig vp1041_mantis_config = {
.model_name = MANTIS_MODEL_NAME,
.dev_type = MANTIS_DEV_TYPE,
.ts_size = MANTIS_TS_188,
.baud_rate = MANTIS_BAUD_9600,
.parity = MANTIS_PARITY_NONE,
.bytes = 0,
};
static const struct stb0899_s1_reg vp1041_stb0899_s1_init_1[] = {
// 0x0000000b , /* SYSREG */
......@@ -258,7 +265,7 @@ static const struct stb0899_s1_reg vp1041_stb0899_s1_init_3[] = {
{ 0xffff , 0xff },
};
struct stb0899_config vp1041_config = {
struct stb0899_config vp1041_stb0899_config = {
.init_dev = vp1041_stb0899_s1_init_1,
.init_s2_demod = stb0899_s2_init_2,
.init_s1_demod = vp1041_stb0899_s1_init_3,
......@@ -299,3 +306,55 @@ struct stb6100_config vp1041_stb6100_config = {
.tuner_address = 0x60,
.refclock = 27000000,
};
static int vp1041_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe)
{
struct i2c_adapter *adapter = &mantis->adapter;
int err = 0;
err = mantis_frontend_power(mantis, POWER_ON);
if (err == 0) {
mantis_frontend_soft_reset(mantis);
msleep(250);
mantis->fe = stb0899_attach(&vp1041_stb0899_config, adapter);
if (mantis->fe) {
dprintk(MANTIS_ERROR, 1,
"found STB0899 DVB-S/DVB-S2 frontend @0x%02x",
vp1041_stb0899_config.demod_address);
if (stb6100_attach(mantis->fe, &vp1041_stb6100_config, adapter)) {
if (!lnbp21_attach(mantis->fe, adapter, 0, 0)) {
printk("%s: No LNBP21 found!\n", __func__);
}
}
} else {
return -EREMOTEIO;
}
} else {
dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>",
adapter->name,
err);
return -EIO;
}
dprintk(MANTIS_ERROR, 1, "Done!");
return 0;
}
struct mantis_hwconfig vp1041_config = {
.model_name = MANTIS_MODEL_NAME,
.dev_type = MANTIS_DEV_TYPE,
.ts_size = MANTIS_TS_188,
.baud_rate = MANTIS_BAUD_9600,
.parity = MANTIS_PARITY_NONE,
.bytes = 0,
.frontend_init = vp1041_frontend_init,
.power = GPIF_A12,
.reset = GPIF_A13,
};
......@@ -21,17 +21,13 @@
#ifndef __MANTIS_VP1041_H
#define __MANTIS_VP1041_H
#include "dvb_frontend.h"
#include "mantis_common.h"
#include "stb0899_drv.h"
#include "stb6100.h"
#include "lnbp21.h"
#define MANTIS_VP_1041_DVB_S2 0x0031
#define TECHNISAT_SKYSTAR_HD2 0x0001
#define SKYSTAR_HD2_10 0x0001
#define SKYSTAR_HD2_20 0x0003
#define CINERGY_S2_PCI_HD 0x1179
extern struct mantis_hwconfig vp1041_mantis_config;
extern struct stb0899_config vp1041_config;
extern struct stb6100_config vp1041_stb6100_config;
extern struct mantis_hwconfig vp1041_config;
#endif // __MANTIS_VP1041_H
#endif /* __MANTIS_VP1041_H */
......@@ -18,48 +18,59 @@
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <asm/irq.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include "dmxdev.h"
#include "dvbdev.h"
#include "dvb_demux.h"
#include "dvb_frontend.h"
#include "dvb_net.h"
#include "tda1002x.h"
#include "mantis_common.h"
#include "mantis_vp2033.h"
#define MANTIS_MODEL_NAME "VP-2033"
#define MANTIS_DEV_TYPE "DVB-C"
struct mantis_hwconfig vp2033_mantis_config = {
.model_name = MANTIS_MODEL_NAME,
.dev_type = MANTIS_DEV_TYPE,
.ts_size = MANTIS_TS_204,
.baud_rate = MANTIS_BAUD_9600,
.parity = MANTIS_PARITY_NONE,
.bytes = 0,
struct tda1002x_config vp2033_tda1002x_cu1216_config = {
.demod_address = 0x18 >> 1,
.invert = 1,
};
struct tda1002x_config philips_cu1216_config = {
struct tda10023_config vp2033_tda10023_cu1216_config = {
.demod_address = 0x18 >> 1,
.invert = 1,
};
u8 read_pwm(struct mantis_pci *mantis)
static u8 read_pwm(struct mantis_pci *mantis)
{
struct i2c_adapter *adapter = &mantis->adapter;
u8 b = 0xff;
u8 pwm;
struct i2c_msg msg[] = {
{.addr = 0x50,.flags = 0,.buf = &b,.len = 1},
{.addr = 0x50,.flags = I2C_M_RD,.buf = &pwm,.len = 1}
{.addr = 0x50, .flags = 0, .buf = &b, .len = 1},
{.addr = 0x50, .flags = I2C_M_RD, .buf = &pwm, .len = 1}
};
if ((i2c_transfer(&mantis->adapter, msg, 2) != 2)
if ((i2c_transfer(adapter, msg, 2) != 2)
|| (pwm == 0xff))
pwm = 0x48;
return pwm;
}
int philips_cu1216_tuner_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
static int tda1002x_cu1216_tuner_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
{
struct mantis_pci *mantis = fe->dvb->priv;
struct i2c_adapter *adapter = &mantis->adapter;
u8 buf[6];
struct i2c_msg msg = {.addr = 0x60,.flags = 0,.buf = buf,.len = sizeof(buf) };
struct i2c_msg msg = {.addr = 0x60, .flags = 0, .buf = buf, .len = sizeof (buf) };
int i;
#define CU1216_IF 36125000
......@@ -78,7 +89,7 @@ int philips_cu1216_tuner_set(struct dvb_frontend *fe, struct dvb_frontend_parame
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
if (i2c_transfer(&mantis->adapter, &msg, 1) != 1)
if (i2c_transfer(adapter, &msg, 1) != 1)
return -EIO;
/* wait for the pll lock */
......@@ -88,7 +99,7 @@ int philips_cu1216_tuner_set(struct dvb_frontend *fe, struct dvb_frontend_parame
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
if (i2c_transfer(&mantis->adapter, &msg, 1) == 1 && (buf[0] & 0x40))
if (i2c_transfer(adapter, &msg, 1) == 1 && (buf[0] & 0x40))
break;
msleep(10);
......@@ -102,8 +113,58 @@ int philips_cu1216_tuner_set(struct dvb_frontend *fe, struct dvb_frontend_parame
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
if (i2c_transfer(&mantis->adapter, &msg, 1) != 1)
if (i2c_transfer(adapter, &msg, 1) != 1)
return -EIO;
return 0;
}
static int vp2033_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe)
{
struct i2c_adapter *adapter = &mantis->adapter;
dprintk(MANTIS_ERROR, 1, "Probing for CU1216 (DVB-C)");
fe = tda10021_attach(&vp2033_tda1002x_cu1216_config,
adapter,
read_pwm(mantis));
if (fe) {
dprintk(MANTIS_ERROR, 1,
"found Philips CU1216 DVB-C frontend (TDA10021) @ 0x%02x",
vp2033_tda1002x_cu1216_config.demod_address);
} else {
fe = tda10023_attach(&vp2033_tda10023_cu1216_config,
adapter,
read_pwm(mantis));
if (fe) {
dprintk(MANTIS_ERROR, 1,
"found Philips CU1216 DVB-C frontend (TDA10023) @ 0x%02x",
vp2033_tda1002x_cu1216_config.demod_address);
}
}
if (fe) {
fe->ops.tuner_ops.set_params = tda1002x_cu1216_tuner_set;
dprintk(MANTIS_ERROR, 1, "Mantis DVB-C Philips CU1216 frontend attach success");
} else {
return -1;
}
mantis->fe = fe;
dprintk(MANTIS_DEBUG, 1, "Done!");
return 0;
}
struct mantis_hwconfig vp2033_config = {
.model_name = MANTIS_MODEL_NAME,
.dev_type = MANTIS_DEV_TYPE,
.ts_size = MANTIS_TS_204,
.baud_rate = MANTIS_BAUD_9600,
.parity = MANTIS_PARITY_NONE,
.bytes = 0,
.frontend_init = vp2033_frontend_init,
};
......@@ -21,17 +21,10 @@
#ifndef __MANTIS_VP2033_H
#define __MANTIS_VP2033_H
#include "dvb_frontend.h"
#include "mantis_common.h"
#include "tda1002x.h"
#define MANTIS_VP_2033_DVB_C 0x0008
extern struct tda1002x_config philips_cu1216_config;
extern struct mantis_hwconfig vp2033_mantis_config;
extern struct mantis_hwconfig vp2033_config;
extern int philips_cu1216_tuner_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params);
extern u8 read_pwm(struct mantis_pci *mantis);
#endif // __MANTIS_VP2033_H
#endif /* __MANTIS_VP2033_H */
......@@ -18,22 +18,153 @@
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <asm/irq.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include "dmxdev.h"
#include "dvbdev.h"
#include "dvb_demux.h"
#include "dvb_frontend.h"
#include "dvb_net.h"
#include "tda1002x.h"
#include "mantis_common.h"
#include "mantis_vp2040.h"
#define MANTIS_MODEL_NAME "VP-2040"
#define MANTIS_DEV_TYPE "DVB-C"
struct mantis_hwconfig vp2040_mantis_config = {
struct tda1002x_config vp2040_tda1002x_cu1216_config = {
.demod_address = 0x18 >> 1,
.invert = 1,
};
struct tda10023_config vp2040_tda10023_cu1216_config = {
.demod_address = 0x18 >> 1,
.invert = 1,
};
static int tda1002x_cu1216_tuner_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
{
struct mantis_pci *mantis = fe->dvb->priv;
struct i2c_adapter *adapter = &mantis->adapter;
u8 buf[6];
struct i2c_msg msg = {.addr = 0x60,.flags = 0,.buf = buf,.len = sizeof (buf) };
int i;
#define CU1216_IF 36125000
#define TUNER_MUL 62500
u32 div = (params->frequency + CU1216_IF + TUNER_MUL / 2) / TUNER_MUL;
buf[0] = (div >> 8) & 0x7f;
buf[1] = div & 0xff;
buf[2] = 0xce;
buf[3] = (params->frequency < 150000000 ? 0x01 :
params->frequency < 445000000 ? 0x02 : 0x04);
buf[4] = 0xde;
buf[5] = 0x20;
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
if (i2c_transfer(adapter, &msg, 1) != 1)
return -EIO;
/* wait for the pll lock */
msg.flags = I2C_M_RD;
msg.len = 1;
for (i = 0; i < 20; i++) {
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
if (i2c_transfer(adapter, &msg, 1) == 1 && (buf[0] & 0x40))
break;
msleep(10);
}
/* switch the charge pump to the lower current */
msg.flags = 0;
msg.len = 2;
msg.buf = &buf[2];
buf[2] &= ~0x40;
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
if (i2c_transfer(adapter, &msg, 1) != 1)
return -EIO;
return 0;
}
static u8 read_pwm(struct mantis_pci *mantis)
{
struct i2c_adapter *adapter = &mantis->adapter;
u8 b = 0xff;
u8 pwm;
struct i2c_msg msg[] = {
{.addr = 0x50, .flags = 0, .buf = &b, .len = 1},
{.addr = 0x50, .flags = I2C_M_RD, .buf = &pwm, .len = 1}
};
if ((i2c_transfer(adapter, msg, 2) != 2)
|| (pwm == 0xff))
pwm = 0x48;
return pwm;
}
static int vp2040_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe)
{
struct i2c_adapter *adapter = &mantis->adapter;
dprintk(MANTIS_ERROR, 1, "Probing for CU1216 (DVB-C)");
fe = tda10021_attach(&vp2040_tda1002x_cu1216_config,
adapter,
read_pwm(mantis));
if (fe) {
dprintk(MANTIS_ERROR, 1,
"found Philips CU1216 DVB-C frontend (TDA10021) @ 0x%02x",
vp2040_tda1002x_cu1216_config.demod_address);
} else {
fe = tda10023_attach(&vp2040_tda10023_cu1216_config,
adapter,
read_pwm(mantis));
if (fe) {
dprintk(MANTIS_ERROR, 1,
"found Philips CU1216 DVB-C frontend (TDA10023) @ 0x%02x",
vp2040_tda1002x_cu1216_config.demod_address);
}
}
if (fe) {
fe->ops.tuner_ops.set_params = tda1002x_cu1216_tuner_set;
dprintk(MANTIS_ERROR, 1, "Mantis DVB-C Philips CU1216 frontend attach success");
} else {
return -1;
}
mantis->fe = fe;
dprintk(MANTIS_DEBUG, 1, "Done!");
return 0;
}
struct mantis_hwconfig vp2040_config = {
.model_name = MANTIS_MODEL_NAME,
.dev_type = MANTIS_DEV_TYPE,
.ts_size = MANTIS_TS_204,
.baud_rate = MANTIS_BAUD_9600,
.parity = MANTIS_PARITY_NONE,
.bytes = 0,
};
struct tda10023_config tda10023_cu1216_config = {
.demod_address = 0x18 >> 1,
.invert = 1,
.frontend_init = vp2040_frontend_init,
};
......@@ -21,15 +21,12 @@
#ifndef __MANTIS_VP2040_H
#define __MANTIS_VP2040_H
#include "dvb_frontend.h"
#include "mantis_common.h"
#include "tda1002x.h"
#define MANTIS_VP_2040_DVB_C 0x0043
#define TERRATEC_CINERGY_C_PCI 0x1178
#define TECHNISAT_CABLESTAR_HD2 0x0002
#define CINERGY_C 0x1178
#define CABLESTAR_HD2 0x0002
extern struct tda10023_config tda10023_cu1216_config;
extern struct mantis_hwconfig vp2040_mantis_config;
extern struct mantis_hwconfig vp2040_config;
#endif //__MANTIS_VP2040_H
#endif /* __MANTIS_VP2040_H */
......@@ -18,6 +18,18 @@
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <asm/irq.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include "dmxdev.h"
#include "dvbdev.h"
#include "dvb_demux.h"
#include "dvb_frontend.h"
#include "dvb_net.h"
#include "zl10353.h"
#include "mantis_common.h"
#include "mantis_vp3030.h"
......@@ -28,15 +40,6 @@ struct zl10353_config mantis_vp3030_config = {
#define MANTIS_MODEL_NAME "VP-3030"
#define MANTIS_DEV_TYPE "DVB-T"
struct mantis_hwconfig vp3030_mantis_config = {
.model_name = MANTIS_MODEL_NAME,
.dev_type = MANTIS_DEV_TYPE,
.ts_size = MANTIS_TS_188,
.baud_rate = MANTIS_BAUD_9600,
.parity = MANTIS_PARITY_NONE,
.bytes = 0,
};
int panasonic_en57h12d5_set_params(struct dvb_frontend *fe,
struct dvb_frontend_parameters *params)
{
......@@ -63,3 +66,31 @@ int panasonic_en57h12d5_set_params(struct dvb_frontend *fe,
return 0;
}
static int vp3030_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe)
{
struct i2c_adapter *adapter = &mantis->adapter;
dprintk(MANTIS_ERROR, 1, "Probing for 10353 (DVB-T)");
fe = zl10353_attach(&mantis_vp3030_config, adapter);
if (!fe)
return -1;
mantis->fe = fe;
dprintk(MANTIS_ERROR, 1, "Done!");
return 0;
}
struct mantis_hwconfig vp3030_config = {
.model_name = MANTIS_MODEL_NAME,
.dev_type = MANTIS_DEV_TYPE,
.ts_size = MANTIS_TS_188,
.baud_rate = MANTIS_BAUD_9600,
.parity = MANTIS_PARITY_NONE,
.bytes = 0,
.frontend_init = vp3030_frontend_init,
};
......@@ -21,14 +21,10 @@
#ifndef __MANTIS_VP3030_H
#define __MANTIS_VP3030_H
#include "dvb_frontend.h"
#include "mantis_common.h"
#include "dvb-pll.h"
#include "zl10353.h"
#define MANTIS_VP_3030_DVB_T 0x0024
extern struct zl10353_config mantis_vp3030_config;
extern struct mantis_hwconfig vp3030_mantis_config;
extern struct mantis_hwconfig vp3030_config;
#endif // __MANTIS_VP3030_H
#endif /* __MANTIS_VP3030_H */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment