Commit b3ff1bac authored by Uwe Kleine-König's avatar Uwe Kleine-König Committed by Greg Kroah-Hartman

serial: mxs-auart: Fix baudrate calculation

commit a6040bc6 upstream.

The reference manual for the i.MX28 recommends to calculate the divisor
as

	divisor = (UARTCLK * 32) / baud rate, rounded to the nearest integer

, so let's do this. For a typical setup of UARTCLK = 24 MHz and baud
rate = 115200 this changes the divisor from 6666 to 6667 and so the
actual baud rate improves from 115211.521 Bd (error ≅ 0.01 %) to
115194.240 Bd (error ≅ 0.005 %).
Signed-off-by: default avatarUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 782cb86b
...@@ -1085,7 +1085,7 @@ static void mxs_auart_settermios(struct uart_port *u, ...@@ -1085,7 +1085,7 @@ static void mxs_auart_settermios(struct uart_port *u,
AUART_LINECTRL_BAUD_DIV_MAX); AUART_LINECTRL_BAUD_DIV_MAX);
baud_max = u->uartclk * 32 / AUART_LINECTRL_BAUD_DIV_MIN; baud_max = u->uartclk * 32 / AUART_LINECTRL_BAUD_DIV_MIN;
baud = uart_get_baud_rate(u, termios, old, baud_min, baud_max); baud = uart_get_baud_rate(u, termios, old, baud_min, baud_max);
div = u->uartclk * 32 / baud; div = DIV_ROUND_CLOSEST(u->uartclk * 32, baud);
} }
ctrl |= AUART_LINECTRL_BAUD_DIVFRAC(div & 0x3F); ctrl |= AUART_LINECTRL_BAUD_DIVFRAC(div & 0x3F);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment