Commit b40988c4 authored by Alexander Aring's avatar Alexander Aring Committed by Marcel Holtmann

ieee802154: change mtu size behaviour

This patch changes the mtu size of 802.15.4 interfaces. The current
setting is the meaning of the maximum transport unit with mac header,
which is 127 bytes according 802.15.4. The linux meaning of the mtu size
field is the maximum payload of a mac frame. Like in ethernet, which is
1500 bytes.

We have dynamic length of mac frames in 802.15.4, this is why we assume
the minimum header length which is hard_header_len. This contains fc and
sequence fields. These can evaluated by driver layer without additional
checks. We currently don't support to set the FCS from userspace, so we
need to subtract this from mtu size as well.
Signed-off-by: default avatarAlexander Aring <alex.aring@gmail.com>
Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
parent d58a2fa9
......@@ -273,7 +273,7 @@ static int raw_sendmsg(struct sock *sk, struct msghdr *msg, size_t size)
goto out;
}
mtu = dev->mtu;
mtu = IEEE802154_MTU;
pr_debug("name = %s, mtu = %u\n", dev->name, mtu);
if (size > mtu) {
......@@ -637,7 +637,7 @@ static int dgram_sendmsg(struct sock *sk, struct msghdr *msg, size_t size)
err = -ENXIO;
goto out;
}
mtu = dev->mtu;
mtu = IEEE802154_MTU;
pr_debug("name = %s, mtu = %u\n", dev->name, mtu);
if (size > mtu) {
......
......@@ -547,7 +547,17 @@ static void ieee802154_if_setup(struct net_device *dev)
*/
dev->needed_tailroom = IEEE802154_MAX_AUTH_TAG_LEN +
IEEE802154_FCS_LEN;
dev->mtu = IEEE802154_MTU;
/* The mtu size is the payload without mac header in this case.
* We have a dynamic length header with a minimum header length
* which is hard_header_len. In this case we let mtu to the size
* of maximum payload which is IEEE802154_MTU - IEEE802154_FCS_LEN -
* hard_header_len. The FCS which is set by hardware or ndo_start_xmit
* and the minimum mac header which can be evaluated inside driver
* layer. The rest of mac header will be part of payload if greater
* than hard_header_len.
*/
dev->mtu = IEEE802154_MTU - IEEE802154_FCS_LEN -
dev->hard_header_len;
dev->tx_queue_len = 300;
dev->flags = IFF_NOARP | IFF_BROADCAST;
}
......
......@@ -71,17 +71,6 @@ ieee802154_tx(struct ieee802154_local *local, struct sk_buff *skb)
struct net_device *dev = skb->dev;
int ret;
/* This check is for AF_PACKET RAW socket only, which doesn't
* know about the FCS which is set here or by hardware. otherwise
* it should not occur in any case!
*
* TODO: This should be handled in AF_PACKET and return -EMSGSIZE.
*/
if (skb->len > IEEE802154_MTU - IEEE802154_FCS_LEN) {
netdev_warn(dev, "Frame len above MTU limit. Dropped.\n");
goto err_tx;
}
if (!(local->hw.flags & IEEE802154_HW_TX_OMIT_CKSUM)) {
u16 crc = crc_ccitt(0, skb->data, skb->len);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment