Commit b42d7f51 authored by Tomi Valkeinen's avatar Tomi Valkeinen

drm/omap: dpi: remove legacy data_lines

Remove DPI's legacy data_lines code.
Signed-off-by: default avatarTomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: default avatarLaurent Pinchart <laurent.pinchart@ideasonboard.com>
parent e0eb2acb
......@@ -22,7 +22,6 @@ struct panel_drv_data {
struct omap_dss_device *in;
int pd_gpio;
int data_lines;
struct videomode vm;
};
......@@ -82,8 +81,6 @@ static int tfp410_enable(struct omap_dss_device *dssdev)
return 0;
in->ops.dpi->set_timings(in, &ddata->vm);
if (ddata->data_lines)
in->ops.dpi->set_data_lines(in, ddata->data_lines);
r = in->ops.dpi->enable(in);
if (r)
......@@ -226,7 +223,6 @@ static int tfp410_probe(struct platform_device *pdev)
dssdev->type = OMAP_DISPLAY_TYPE_DPI;
dssdev->output_type = OMAP_DISPLAY_TYPE_DVI;
dssdev->owner = THIS_MODULE;
dssdev->phy.dpi.data_lines = ddata->data_lines;
dssdev->port_num = 1;
r = omapdss_register_output(dssdev);
......
......@@ -25,8 +25,6 @@ struct panel_drv_data {
struct omap_dss_device dssdev;
struct omap_dss_device *in;
int data_lines;
struct videomode vm;
struct backlight_device *backlight;
......@@ -76,8 +74,6 @@ static int panel_dpi_enable(struct omap_dss_device *dssdev)
if (omapdss_device_is_enabled(dssdev))
return 0;
if (ddata->data_lines)
in->ops.dpi->set_data_lines(in, ddata->data_lines);
in->ops.dpi->set_timings(in, &ddata->vm);
r = in->ops.dpi->enable(in);
......@@ -253,7 +249,6 @@ static int panel_dpi_probe(struct platform_device *pdev)
dssdev->type = OMAP_DISPLAY_TYPE_DPI;
dssdev->owner = THIS_MODULE;
dssdev->panel.vm = ddata->vm;
dssdev->phy.dpi.data_lines = ddata->data_lines;
r = omapdss_register_display(dssdev);
if (r) {
......
......@@ -49,8 +49,6 @@ struct panel_drv_data {
struct spi_device *spi;
int data_lines;
struct videomode vm;
struct gpio_desc *enable_gpio;
......@@ -159,8 +157,6 @@ static int lb035q02_enable(struct omap_dss_device *dssdev)
if (omapdss_device_is_enabled(dssdev))
return 0;
if (ddata->data_lines)
in->ops.dpi->set_data_lines(in, ddata->data_lines);
in->ops.dpi->set_timings(in, &ddata->vm);
r = in->ops.dpi->enable(in);
......@@ -289,7 +285,6 @@ static int lb035q02_panel_spi_probe(struct spi_device *spi)
dssdev->type = OMAP_DISPLAY_TYPE_DPI;
dssdev->owner = THIS_MODULE;
dssdev->panel.vm = ddata->vm;
dssdev->phy.dpi.data_lines = ddata->data_lines;
r = omapdss_register_display(dssdev);
if (r) {
......
......@@ -25,8 +25,6 @@ struct panel_drv_data {
struct videomode vm;
int data_lines;
int res_gpio;
int qvga_gpio;
......@@ -153,8 +151,6 @@ static int nec_8048_enable(struct omap_dss_device *dssdev)
if (omapdss_device_is_enabled(dssdev))
return 0;
if (ddata->data_lines)
in->ops.dpi->set_data_lines(in, ddata->data_lines);
in->ops.dpi->set_timings(in, &ddata->vm);
r = in->ops.dpi->enable(in);
......
......@@ -24,8 +24,6 @@ struct panel_drv_data {
struct omap_dss_device *in;
struct regulator *vcc;
int data_lines;
struct videomode vm;
struct gpio_desc *resb_gpio; /* low = reset active min 20 us */
......@@ -99,8 +97,6 @@ static int sharp_ls_enable(struct omap_dss_device *dssdev)
if (omapdss_device_is_enabled(dssdev))
return 0;
if (ddata->data_lines)
in->ops.dpi->set_data_lines(in, ddata->data_lines);
in->ops.dpi->set_timings(in, &ddata->vm);
if (ddata->vcc) {
......@@ -289,7 +285,6 @@ static int sharp_ls_probe(struct platform_device *pdev)
dssdev->type = OMAP_DISPLAY_TYPE_DPI;
dssdev->owner = THIS_MODULE;
dssdev->panel.vm = ddata->vm;
dssdev->phy.dpi.data_lines = ddata->data_lines;
r = omapdss_register_display(dssdev);
if (r) {
......
......@@ -35,8 +35,6 @@ struct panel_drv_data {
struct omap_dss_device dssdev;
struct omap_dss_device *in;
int data_lines;
struct videomode vm;
struct spi_device *spi_dev;
......@@ -207,8 +205,6 @@ static int td028ttec1_panel_enable(struct omap_dss_device *dssdev)
if (omapdss_device_is_enabled(dssdev))
return 0;
if (ddata->data_lines)
in->ops.dpi->set_data_lines(in, ddata->data_lines);
in->ops.dpi->set_timings(in, &ddata->vm);
r = in->ops.dpi->enable(in);
......@@ -423,7 +419,6 @@ static int td028ttec1_panel_probe(struct spi_device *spi)
dssdev->type = OMAP_DISPLAY_TYPE_DPI;
dssdev->owner = THIS_MODULE;
dssdev->panel.vm = ddata->vm;
dssdev->phy.dpi.data_lines = ddata->data_lines;
r = omapdss_register_display(dssdev);
if (r) {
......
......@@ -58,8 +58,6 @@ struct panel_drv_data {
struct videomode vm;
int data_lines;
struct spi_device *spi;
struct regulator *vcc_reg;
int nreset_gpio;
......@@ -378,8 +376,6 @@ static int tpo_td043_enable(struct omap_dss_device *dssdev)
if (omapdss_device_is_enabled(dssdev))
return 0;
if (ddata->data_lines)
in->ops.dpi->set_data_lines(in, ddata->data_lines);
in->ops.dpi->set_timings(in, &ddata->vm);
r = in->ops.dpi->enable(in);
......
......@@ -560,17 +560,6 @@ static int dpi_check_timings(struct omap_dss_device *dssdev,
return 0;
}
static void dpi_set_data_lines(struct omap_dss_device *dssdev, int data_lines)
{
struct dpi_data *dpi = dpi_get_data_from_dssdev(dssdev);
mutex_lock(&dpi->lock);
dpi->data_lines = data_lines;
mutex_unlock(&dpi->lock);
}
static int dpi_verify_pll(struct dss_pll *pll)
{
int r;
......@@ -725,8 +714,6 @@ static const struct omapdss_dpi_ops dpi_ops = {
.check_timings = dpi_check_timings,
.set_timings = dpi_set_timings,
.get_timings = dpi_get_timings,
.set_data_lines = dpi_set_data_lines,
};
static void dpi_init_output_port(struct platform_device *pdev,
......
......@@ -471,8 +471,6 @@ struct omapdss_dpi_ops {
struct videomode *vm);
void (*get_timings)(struct omap_dss_device *dssdev,
struct videomode *vm);
void (*set_data_lines)(struct omap_dss_device *dssdev, int data_lines);
};
struct omapdss_sdi_ops {
......@@ -625,10 +623,6 @@ struct omap_dss_device {
enum omap_display_type output_type;
union {
struct {
u8 data_lines;
} dpi;
struct {
u8 channel;
u8 data_lines;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment