Commit b4399591 authored by Martin Kaiser's avatar Martin Kaiser Committed by Greg Kroah-Hartman

staging: rtl8188eu: remove RT_TRACE and MSG_88E prints from usb_halinit.c

Eventually, all driver-specific debug prints should be removed.
Take another step in that direction.
Signed-off-by: default avatarMartin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210620175301.14988-7-martin@kaiser.cxSigned-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent ef803a9a
......@@ -648,7 +648,6 @@ u32 rtl8188eu_hal_init(struct adapter *Adapter)
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_INIT_PW_ON);
status = rtw_hal_power_on(Adapter);
if (status == _FAIL) {
RT_TRACE(_module_hci_hal_init_c_, _drv_err_, ("Failed to init power on!\n"));
goto exit;
}
......@@ -688,7 +687,6 @@ u32 rtl8188eu_hal_init(struct adapter *Adapter)
Adapter->bFWReady = false;
return status;
}
RT_TRACE(_module_hci_hal_init_c_, _drv_info_, ("Initializeadapt8192CSdio(): Download Firmware Success!!\n"));
Adapter->bFWReady = true;
}
rtl8188e_InitializeFirmwareVars(Adapter);
......@@ -709,7 +707,6 @@ u32 rtl8188eu_hal_init(struct adapter *Adapter)
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_INIT_LLTT);
status = InitLLTTable(Adapter, txpktbuf_bndy);
if (status == _FAIL) {
RT_TRACE(_module_hci_hal_init_c_, _drv_err_, ("Failed to init LLT table\n"));
goto exit;
}
......@@ -845,8 +842,6 @@ static void CardDisableRTL8188EU(struct adapter *Adapter)
{
u8 val8;
RT_TRACE(_module_hci_hal_init_c_, _drv_info_, ("%s\n", __func__));
/* Stop Tx Report Timer. 0x4EC[Bit1]=b'0 */
val8 = usb_read8(Adapter, REG_TX_RPT_CTRL);
usb_write8(Adapter, REG_TX_RPT_CTRL, val8 & (~BIT(1)));
......@@ -938,14 +933,10 @@ u32 rtw_hal_inirp_init(struct adapter *Adapter)
status = _SUCCESS;
RT_TRACE(_module_hci_hal_init_c_, _drv_info_,
("===> usb_inirp_init\n"));
/* issue Rx irp to receive data */
precvbuf = precvpriv->precv_buf;
for (i = 0; i < NR_RECVBUFF; i++) {
if (!usb_read_port(Adapter, RECV_BULK_IN_ADDR, precvbuf)) {
RT_TRACE(_module_hci_hal_init_c_, _drv_err_, ("usb_rx_init: usb_read_port error\n"));
status = _FAIL;
goto exit;
}
......@@ -954,9 +945,6 @@ u32 rtw_hal_inirp_init(struct adapter *Adapter)
}
exit:
RT_TRACE(_module_hci_hal_init_c_, _drv_info_, ("<=== usb_inirp_init\n"));
return status;
}
......@@ -1000,8 +988,6 @@ static void Hal_EfuseParseMACAddr_8188EU(struct adapter *adapt, u8 *hwinfo, bool
/* Read Permanent MAC address */
memcpy(eeprom->mac_addr, &hwinfo[EEPROM_MAC_ADDR_88EU], ETH_ALEN);
}
RT_TRACE(_module_hci_hal_init_c_, _drv_notice_,
("%s: Permanent Address = %pM\n", __func__, eeprom->mac_addr));
}
static void readAdapterInfo_8188EU(struct adapter *adapt)
......@@ -1040,14 +1026,7 @@ static void _ReadPROMContent(struct adapter *Adapter)
void rtw_hal_read_chip_info(struct adapter *Adapter)
{
unsigned long start = jiffies;
MSG_88E("====> %s\n", __func__);
_ReadPROMContent(Adapter);
MSG_88E("<==== %s in %d ms\n", __func__,
jiffies_to_msecs(jiffies - start));
}
#define GPIO_DEBUG_PORT_NUM 0
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment