Commit b4600d70 authored by Mauro Carvalho Chehab's avatar Mauro Carvalho Chehab

[media] dib8000: estimate strength in dBm

Better to have Signal strength in dB.
This takes a very rough estimation for the signal strength,
that was calibrated using a Dektec DTA-2111 Gold RF generator
and a Pixelview dib8076 stick.

It estimates the signal strength using a linear equation where:
	- the max is -22.5 dBm, with returns 55953
	- the min is -35.0 dBm, with returns 50110

With -22dBm, the signal strengh is returned as 65535.
Unfortunately, the min strength generated with DTA-2111 is
-35dBm.

It should be noticed that approximating it by a linear equation
is not right. I should probably be splitting it into 0.5 dB
linear segments, in order to get a higher precision, just like
it is done on mb86a20s, but that would force me to add some
attenuators, in order to get dB levels below -35dBm, which is,
btw, strong enough to get signal lock.
Signed-off-by: default avatarMauro Carvalho Chehab <m.chehab@samsung.com>
Acked-by: default avatarPatrick Boettcher <pboettcher@kernellabs.com>
parent 6ef06e78
...@@ -11,6 +11,7 @@ ...@@ -11,6 +11,7 @@
#include <linux/slab.h> #include <linux/slab.h>
#include <linux/i2c.h> #include <linux/i2c.h>
#include <linux/mutex.h> #include <linux/mutex.h>
#include <asm/div64.h>
#include "dvb_math.h" #include "dvb_math.h"
...@@ -1002,7 +1003,7 @@ static void dib8000_reset_stats(struct dvb_frontend *fe) ...@@ -1002,7 +1003,7 @@ static void dib8000_reset_stats(struct dvb_frontend *fe)
c->post_bit_error.len = 1; c->post_bit_error.len = 1;
c->post_bit_count.len = 1; c->post_bit_count.len = 1;
c->strength.stat[0].scale = FE_SCALE_RELATIVE; c->strength.stat[0].scale = FE_SCALE_DECIBEL;
c->strength.stat[0].uvalue = 0; c->strength.stat[0].uvalue = 0;
c->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE; c->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
...@@ -3847,12 +3848,30 @@ static int dib8000_get_stats(struct dvb_frontend *fe, fe_status_t stat) ...@@ -3847,12 +3848,30 @@ static int dib8000_get_stats(struct dvb_frontend *fe, fe_status_t stat)
struct dib8000_state *state = fe->demodulator_priv; struct dib8000_state *state = fe->demodulator_priv;
struct dtv_frontend_properties *c = &state->fe[0]->dtv_property_cache; struct dtv_frontend_properties *c = &state->fe[0]->dtv_property_cache;
int i, lock; int i, lock;
u64 tmp;
u32 snr, val; u32 snr, val;
u16 strength; u16 strength;
/* Get Signal strength */ /* Get Signal strength */
dib8000_read_signal_strength(fe, &strength); dib8000_read_signal_strength(fe, &strength);
c->strength.stat[0].uvalue = strength;
/*
* Estimate it in dBm
* This calculus was empirically determinated by measuring the signal
* strength generated by a DTA-2111 RF generator directly connected into
* a dib8076 device. The real value can actually be different on other
* devices, depending if LNA is enabled or not, if diversity is enabled,
* etc.
*/
if (strength == 65535) {
c->strength.stat[0].svalue = -22000;
} else {
tmp = strength * 25000L;
do_div(tmp, 11646);
c->strength.stat[0].svalue = tmp - 142569;
if (c->strength.stat[0].svalue > -22000)
c->strength.stat[0].svalue = -22000;
}
/* Check if 1 second was elapsed */ /* Check if 1 second was elapsed */
if (!time_after(jiffies, state->get_stats_time)) if (!time_after(jiffies, state->get_stats_time))
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment