ARM: mvebu: remove conflicting muxing on Armada 370 DB

Back when audio was enabled, the muxing of some MPP pins was causing
problems. However, since commit fea038ed ("ARM: mvebu: Add proper
pin muxing on the Armada 370 DB board"), those problematic MPP pins
have been assigned a proper muxing for the Ethernet interfaces. This
proper muxing is now conflicting with the hog pins muxing that had
been added as part of 249f3822 ("ARM: mvebu: add audio support to
Armada 370 DB").

Therefore, this commit simply removes the hog pins muxing, which
solves a warning a boot time due to the conflicting muxing
requirements.

Fixes: fea038ed ("ARM: mvebu: Add proper pin muxing on the Armada 370 DB board")
Cc: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lkml.kernel.org/r/1414512524-24466-5-git-send-email-thomas.petazzoni@free-electrons.comSigned-off-by: Jason Cooper <jason@lakedaemon.net>

arch/arm/boot/dts/armada-370-db.dts

@@ -102,30 +102,6 @@ mvsdio@d4000 {
 				broken-cd;
 			};
 
-			pinctrl {
-				/*
-				 * These pins might be muxed as I2S by
-				 * the bootloader, but it conflicts
-				 * with the real I2S pins that are
-				 * muxed using i2s_pins. We must mux
-				 * those pins to a function other than
-				 * I2S.
-				 */
-				pinctrl-0 = <&hog_pins1 &hog_pins2>;
-				pinctrl-names = "default";
-
-				hog_pins1: hog-pins1 {
-					marvell,pins = "mpp6",  "mpp8", "mpp10",
-						       "mpp12", "mpp13";
-					marvell,function = "gpio";
-				};
-
-				hog_pins2: hog-pins2 {
-					marvell,pins = "mpp5", "mpp7", "mpp9";
-					marvell,function = "gpo";
-				};
-			};
-
 			usb@50000 {
 				status = "okay";
 			};