Commit b4626a7f authored by Yang Ling's avatar Yang Ling Committed by Stephen Boyd

CLK: Add Loongson1C clock support

This patch adds clock support to Loongson1C SoC.
Signed-off-by: default avatarYang Ling <gnaygnil@gmail.com>
Acked-by: default avatarKeguang Zhang <keguang.zhang@gmail.com>
Signed-off-by: default avatarStephen Boyd <sboyd@codeaurora.org>
parent f0ffaf18
obj-y += clk.o
obj-$(CONFIG_LOONGSON1_LS1B) += clk-loongson1b.o
obj-$(CONFIG_LOONGSON1_LS1C) += clk-loongson1c.o
/*
* Copyright (c) 2016 Yang Ling <gnaygnil@gmail.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/clkdev.h>
#include <linux/clk-provider.h>
#include <loongson1.h>
#include "clk.h"
#define OSC (24 * 1000000)
#define DIV_APB 1
static DEFINE_SPINLOCK(_lock);
static unsigned long ls1x_pll_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
u32 pll, rate;
pll = __raw_readl(LS1X_CLK_PLL_FREQ);
rate = ((pll >> 8) & 0xff) + ((pll >> 16) & 0xff);
rate *= OSC;
rate >>= 2;
return rate;
}
static const struct clk_ops ls1x_pll_clk_ops = {
.recalc_rate = ls1x_pll_recalc_rate,
};
static const struct clk_div_table ahb_div_table[] = {
[0] = { .val = 0, .div = 2 },
[1] = { .val = 1, .div = 4 },
[2] = { .val = 2, .div = 3 },
[3] = { .val = 3, .div = 3 },
};
void __init ls1x_clk_init(void)
{
struct clk_hw *hw;
hw = clk_hw_register_fixed_rate(NULL, "osc_clk", NULL, 0, OSC);
clk_hw_register_clkdev(hw, "osc_clk", NULL);
/* clock derived from 24 MHz OSC clk */
hw = clk_hw_register_pll(NULL, "pll_clk", "osc_clk",
&ls1x_pll_clk_ops, 0);
clk_hw_register_clkdev(hw, "pll_clk", NULL);
hw = clk_hw_register_divider(NULL, "cpu_clk_div", "pll_clk",
CLK_GET_RATE_NOCACHE, LS1X_CLK_PLL_DIV,
DIV_CPU_SHIFT, DIV_CPU_WIDTH,
CLK_DIVIDER_ONE_BASED |
CLK_DIVIDER_ROUND_CLOSEST, &_lock);
clk_hw_register_clkdev(hw, "cpu_clk_div", NULL);
hw = clk_hw_register_fixed_factor(NULL, "cpu_clk", "cpu_clk_div",
0, 1, 1);
clk_hw_register_clkdev(hw, "cpu_clk", NULL);
hw = clk_hw_register_divider(NULL, "dc_clk_div", "pll_clk",
0, LS1X_CLK_PLL_DIV, DIV_DC_SHIFT,
DIV_DC_WIDTH, CLK_DIVIDER_ONE_BASED, &_lock);
clk_hw_register_clkdev(hw, "dc_clk_div", NULL);
hw = clk_hw_register_fixed_factor(NULL, "dc_clk", "dc_clk_div",
0, 1, 1);
clk_hw_register_clkdev(hw, "dc_clk", NULL);
hw = clk_hw_register_divider_table(NULL, "ahb_clk_div", "cpu_clk_div",
0, LS1X_CLK_PLL_FREQ, DIV_DDR_SHIFT,
DIV_DDR_WIDTH, CLK_DIVIDER_ALLOW_ZERO,
ahb_div_table, &_lock);
clk_hw_register_clkdev(hw, "ahb_clk_div", NULL);
hw = clk_hw_register_fixed_factor(NULL, "ahb_clk", "ahb_clk_div",
0, 1, 1);
clk_hw_register_clkdev(hw, "ahb_clk", NULL);
clk_hw_register_clkdev(hw, "ls1x-dma", NULL);
clk_hw_register_clkdev(hw, "stmmaceth", NULL);
/* clock derived from AHB clk */
hw = clk_hw_register_fixed_factor(NULL, "apb_clk", "ahb_clk", 0, 1,
DIV_APB);
clk_hw_register_clkdev(hw, "apb_clk", NULL);
clk_hw_register_clkdev(hw, "ls1x-ac97", NULL);
clk_hw_register_clkdev(hw, "ls1x-i2c", NULL);
clk_hw_register_clkdev(hw, "ls1x-nand", NULL);
clk_hw_register_clkdev(hw, "ls1x-pwmtimer", NULL);
clk_hw_register_clkdev(hw, "ls1x-spi", NULL);
clk_hw_register_clkdev(hw, "ls1x-wdt", NULL);
clk_hw_register_clkdev(hw, "serial8250", NULL);
}
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment