[media] move soc_camera to its own directory

That helps to better organize the soc_camera items.

While here, cleanup Makefiles, removing uneeded include dirs.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/platform/Kconfig

@@ -105,6 +105,13 @@ config VIDEO_M32R_AR_M64278
 	  To compile this driver as a module, choose M here: the
 	  module will be called arv.
 
+config VIDEO_OMAP2
+	tristate "OMAP2 Camera Capture Interface driver"
+	depends on VIDEO_DEV && ARCH_OMAP2
+	select VIDEOBUF_DMA_SG
+	---help---
+	  This is a v4l2 driver for the TI OMAP2 camera capture interface
+
 config VIDEO_OMAP3
 	tristate "OMAP 3 Camera support (EXPERIMENTAL)"
 	depends on OMAP_IOVMM && VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API && ARCH_OMAP3 && EXPERIMENTAL
@@ -117,101 +124,7 @@ config VIDEO_OMAP3_DEBUG
 	---help---
 	  Enable debug messages on OMAP 3 camera controller driver.
 
-config SOC_CAMERA
-	tristate "SoC camera support"
-	depends on VIDEO_V4L2 && HAS_DMA && I2C
-	select VIDEOBUF_GEN
-	select VIDEOBUF2_CORE
-	help
-	  SoC Camera is a common API to several cameras, not connecting
-	  over a bus like PCI or USB. For example some i2c camera connected
-	  directly to the data bus of an SoC.
-
-
-config SOC_CAMERA_PLATFORM
-	tristate "platform camera support"
-	depends on SOC_CAMERA
-	help
-	  This is a generic SoC camera platform driver, useful for testing
-
-config MX1_VIDEO
-	bool
-
-config VIDEO_MX1
-	tristate "i.MX1/i.MXL CMOS Sensor Interface driver"
-	depends on VIDEO_DEV && ARCH_MX1 && SOC_CAMERA
-	select FIQ
-	select VIDEOBUF_DMA_CONTIG
-	select MX1_VIDEO
-	---help---
-	  This is a v4l2 driver for the i.MX1/i.MXL CMOS Sensor Interface
-
-config MX3_VIDEO
-	bool
-
-config VIDEO_MX3
-	tristate "i.MX3x Camera Sensor Interface driver"
-	depends on VIDEO_DEV && MX3_IPU && SOC_CAMERA
-	select VIDEOBUF2_DMA_CONTIG
-	select MX3_VIDEO
-	---help---
-	  This is a v4l2 driver for the i.MX3x Camera Sensor Interface
-
-config VIDEO_PXA27x
-	tristate "PXA27x Quick Capture Interface driver"
-	depends on VIDEO_DEV && PXA27x && SOC_CAMERA
-	select VIDEOBUF_DMA_SG
-	---help---
-	  This is a v4l2 driver for the PXA27x Quick Capture Interface
-
-config VIDEO_SH_MOBILE_CSI2
-	tristate "SuperH Mobile MIPI CSI-2 Interface driver"
-	depends on VIDEO_DEV && SOC_CAMERA && HAVE_CLK
-	---help---
-	  This is a v4l2 driver for the SuperH MIPI CSI-2 Interface
-
-config VIDEO_SH_MOBILE_CEU
-	tristate "SuperH Mobile CEU Interface driver"
-	depends on VIDEO_DEV && SOC_CAMERA && HAS_DMA && HAVE_CLK
-	select VIDEOBUF2_DMA_CONTIG
-	---help---
-	  This is a v4l2 driver for the SuperH Mobile CEU Interface
-
-config VIDEO_OMAP1
-	tristate "OMAP1 Camera Interface driver"
-	depends on VIDEO_DEV && ARCH_OMAP1 && SOC_CAMERA
-	select VIDEOBUF_DMA_CONTIG
-	select VIDEOBUF_DMA_SG
-	---help---
-	  This is a v4l2 driver for the TI OMAP1 camera interface
-
-config VIDEO_OMAP2
-	tristate "OMAP2 Camera Capture Interface driver"
-	depends on VIDEO_DEV && ARCH_OMAP2
-	select VIDEOBUF_DMA_SG
-	---help---
-	  This is a v4l2 driver for the TI OMAP2 camera capture interface
-
-config VIDEO_MX2_HOSTSUPPORT
-	bool
-
-config VIDEO_MX2
-	tristate "i.MX27/i.MX25 Camera Sensor Interface driver"
-	depends on VIDEO_DEV && SOC_CAMERA && (MACH_MX27 || (ARCH_MX25 && BROKEN))
-	select VIDEOBUF2_DMA_CONTIG
-	select VIDEO_MX2_HOSTSUPPORT
-	---help---
-	  This is a v4l2 driver for the i.MX27 and the i.MX25 Camera Sensor
-	  Interface
-
-config VIDEO_ATMEL_ISI
-	tristate "ATMEL Image Sensor Interface (ISI) support"
-	depends on VIDEO_DEV && SOC_CAMERA && ARCH_AT91
-	select VIDEOBUF2_DMA_CONTIG
-	---help---
-	  This module makes the ATMEL Image Sensor Interface available
-	  as a v4l2 device.
-
+source "drivers/media/platform/soc_camera/Kconfig"
 source "drivers/media/platform/s5p-fimc/Kconfig"
 source "drivers/media/platform/s5p-tv/Kconfig"
 

drivers/media/platform/Makefile

@@ -5,41 +5,25 @@
 omap2cam-objs	:=	omap24xxcam.o omap24xxcam-dma.o
 
 obj-$(CONFIG_VIDEO_VINO) += indycam.o
-
 obj-$(CONFIG_VIDEO_VINO) += vino.o
-obj-$(CONFIG_VIDEO_TIMBERDALE)	+= timblogiw.o
-
 
+obj-$(CONFIG_VIDEO_TIMBERDALE)	+= timblogiw.o
 obj-$(CONFIG_VIDEO_M32R_AR_M64278) += arv.o
 
-
+obj-$(CONFIG_VIDEO_VIA_CAMERA) += via-camera.o
 obj-$(CONFIG_VIDEO_CAFE_CCIC) += marvell-ccic/
 obj-$(CONFIG_VIDEO_MMP_CAMERA) += marvell-ccic/
 
-obj-$(CONFIG_VIDEO_VIA_CAMERA) += via-camera.o
-
+obj-$(CONFIG_VIDEO_OMAP2)		+= omap2cam.o
 obj-$(CONFIG_VIDEO_OMAP3)	+= omap3isp/
 
 obj-$(CONFIG_VIDEO_VIU) += fsl-viu.o
 obj-$(CONFIG_VIDEO_VIVI) += vivi.o
-obj-$(CONFIG_VIDEO_MEM2MEM_TESTDEV) += mem2mem_testdev.o
-
 
-obj-$(CONFIG_VIDEO_OMAP2)		+= omap2cam.o
-obj-$(CONFIG_SOC_CAMERA)		+= soc_camera.o soc_mediabus.o
-obj-$(CONFIG_SOC_CAMERA_PLATFORM)	+= soc_camera_platform.o
-# soc-camera host drivers have to be linked after camera drivers
-obj-$(CONFIG_VIDEO_MX1)			+= mx1_camera.o
-obj-$(CONFIG_VIDEO_MX2)			+= mx2_camera.o
-obj-$(CONFIG_VIDEO_MX3)			+= mx3_camera.o
-obj-$(CONFIG_VIDEO_PXA27x)		+= pxa_camera.o
-obj-$(CONFIG_VIDEO_SH_MOBILE_CSI2)	+= sh_mobile_csi2.o
-obj-$(CONFIG_VIDEO_SH_MOBILE_CEU)	+= sh_mobile_ceu_camera.o
-obj-$(CONFIG_VIDEO_OMAP1)		+= omap1_camera.o
-obj-$(CONFIG_VIDEO_ATMEL_ISI)		+= atmel-isi.o
+obj-$(CONFIG_VIDEO_MEM2MEM_TESTDEV) += mem2mem_testdev.o
 
 obj-$(CONFIG_VIDEO_MX2_EMMAPRP)		+= mx2_emmaprp.o
-obj-$(CONFIG_VIDEO_CODA) 			+= coda.o
+obj-$(CONFIG_VIDEO_CODA) 		+= coda.o
 
 obj-$(CONFIG_VIDEO_MEM2MEM_DEINTERLACE)	+= m2m-deinterlace.o
 
@@ -59,8 +43,3 @@ obj-$(CONFIG_VIDEO_SH_VOU)		+= sh_vou.o
 obj-y	+= davinci/
 
 obj-$(CONFIG_ARCH_OMAP)	+= omap/
-
-ccflags-y += -I$(srctree)/drivers/media/dvb-core
-ccflags-y += -I$(srctree)/drivers/media/dvb-frontends
-ccflags-y += -I$(srctree)/drivers/media/tuners
-ccflags-y += -I$(srctree)/drivers/media/i2c/soc_camera

drivers/media/platform/soc_camera/Kconfig

+config SOC_CAMERA
+	tristate "SoC camera support"
+	depends on VIDEO_V4L2 && HAS_DMA && I2C
+	select VIDEOBUF_GEN
+	select VIDEOBUF2_CORE
+	help
+	  SoC Camera is a common API to several cameras, not connecting
+	  over a bus like PCI or USB. For example some i2c camera connected
+	  directly to the data bus of an SoC.
+
+config SOC_CAMERA_PLATFORM
+	tristate "platform camera support"
+	depends on SOC_CAMERA
+	help
+	  This is a generic SoC camera platform driver, useful for testing
+
+config MX1_VIDEO
+	bool
+
+config VIDEO_MX1
+	tristate "i.MX1/i.MXL CMOS Sensor Interface driver"
+	depends on VIDEO_DEV && ARCH_MX1 && SOC_CAMERA
+	select FIQ
+	select VIDEOBUF_DMA_CONTIG
+	select MX1_VIDEO
+	---help---
+	  This is a v4l2 driver for the i.MX1/i.MXL CMOS Sensor Interface
+
+config MX3_VIDEO
+	bool
+
+config VIDEO_MX3
+	tristate "i.MX3x Camera Sensor Interface driver"
+	depends on VIDEO_DEV && MX3_IPU && SOC_CAMERA
+	select VIDEOBUF2_DMA_CONTIG
+	select MX3_VIDEO
+	---help---
+	  This is a v4l2 driver for the i.MX3x Camera Sensor Interface
+
+config VIDEO_PXA27x
+	tristate "PXA27x Quick Capture Interface driver"
+	depends on VIDEO_DEV && PXA27x && SOC_CAMERA
+	select VIDEOBUF_DMA_SG
+	---help---
+	  This is a v4l2 driver for the PXA27x Quick Capture Interface
+
+config VIDEO_SH_MOBILE_CSI2
+	tristate "SuperH Mobile MIPI CSI-2 Interface driver"
+	depends on VIDEO_DEV && SOC_CAMERA && HAVE_CLK
+	---help---
+	  This is a v4l2 driver for the SuperH MIPI CSI-2 Interface
+
+config VIDEO_SH_MOBILE_CEU
+	tristate "SuperH Mobile CEU Interface driver"
+	depends on VIDEO_DEV && SOC_CAMERA && HAS_DMA && HAVE_CLK
+	select VIDEOBUF2_DMA_CONTIG
+	---help---
+	  This is a v4l2 driver for the SuperH Mobile CEU Interface
+
+config VIDEO_OMAP1
+	tristate "OMAP1 Camera Interface driver"
+	depends on VIDEO_DEV && ARCH_OMAP1 && SOC_CAMERA
+	select VIDEOBUF_DMA_CONTIG
+	select VIDEOBUF_DMA_SG
+	---help---
+	  This is a v4l2 driver for the TI OMAP1 camera interface
+
+config VIDEO_MX2_HOSTSUPPORT
+	bool
+
+config VIDEO_MX2
+	tristate "i.MX27/i.MX25 Camera Sensor Interface driver"
+	depends on VIDEO_DEV && SOC_CAMERA && (MACH_MX27 || (ARCH_MX25 && BROKEN))
+	select VIDEOBUF2_DMA_CONTIG
+	select VIDEO_MX2_HOSTSUPPORT
+	---help---
+	  This is a v4l2 driver for the i.MX27 and the i.MX25 Camera Sensor
+	  Interface
+
+config VIDEO_ATMEL_ISI
+	tristate "ATMEL Image Sensor Interface (ISI) support"
+	depends on VIDEO_DEV && SOC_CAMERA && ARCH_AT91
+	select VIDEOBUF2_DMA_CONTIG
+	---help---
+	  This module makes the ATMEL Image Sensor Interface available
+	  as a v4l2 device.
+

drivers/media/platform/soc_camera/Makefile

+obj-$(CONFIG_SOC_CAMERA)		+= soc_camera.o soc_mediabus.o
+obj-$(CONFIG_SOC_CAMERA_PLATFORM)	+= soc_camera_platform.o
+
+# soc-camera host drivers have to be linked after camera drivers
+obj-$(CONFIG_VIDEO_ATMEL_ISI)		+= atmel-isi.o
+obj-$(CONFIG_VIDEO_MX1)			+= mx1_camera.o
+obj-$(CONFIG_VIDEO_MX2)			+= mx2_camera.o
+obj-$(CONFIG_VIDEO_MX3)			+= mx3_camera.o
+obj-$(CONFIG_VIDEO_OMAP1)		+= omap1_camera.o
+obj-$(CONFIG_VIDEO_PXA27x)		+= pxa_camera.o
+obj-$(CONFIG_VIDEO_SH_MOBILE_CEU)	+= sh_mobile_ceu_camera.o
+obj-$(CONFIG_VIDEO_SH_MOBILE_CSI2)	+= sh_mobile_csi2.o
+
+ccflags-y += -I$(srctree)/drivers/media/i2c/soc_camera