net: mdio: i2c: fix rollball accessors

Commit 87e3bee0 ("net: mdio: i2c: Separate C22 and C45 transactions")
separated the non-rollball bus accessors, but left the rollball
accessors as is. As rollball accessors are clause 45, this results
in the rollball protocol being completely non-functional. Fix this.

Fixes: 87e3bee0 ("net: mdio: i2c: Separate C22 and C45 transactions")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/mdio/mdio-i2c.c

@@ -291,7 +291,8 @@ static int i2c_rollball_mii_cmd(struct mii_bus *bus, int bus_addr, u8 cmd,
 	return i2c_transfer_rollball(i2c, msgs, ARRAY_SIZE(msgs));
 }
 
-static int i2c_mii_read_rollball(struct mii_bus *bus, int phy_id, int reg)
+static int i2c_mii_read_rollball(struct mii_bus *bus, int phy_id, int devad,
+				 int reg)
 {
 	u8 buf[4], res[6];
 	int bus_addr, ret;
@@ -302,7 +303,7 @@ static int i2c_mii_read_rollball(struct mii_bus *bus, int phy_id, int reg)
 		return 0xffff;
 
 	buf[0] = ROLLBALL_DATA_ADDR;
-	buf[1] = (reg >> 16) & 0x1f;
+	buf[1] = devad;
 	buf[2] = (reg >> 8) & 0xff;
 	buf[3] = reg & 0xff;
 
@@ -322,8 +323,8 @@ static int i2c_mii_read_rollball(struct mii_bus *bus, int phy_id, int reg)
 	return val;
 }
 
-static int i2c_mii_write_rollball(struct mii_bus *bus, int phy_id, int reg,
-				  u16 val)
+static int i2c_mii_write_rollball(struct mii_bus *bus, int phy_id, int devad,
+				  int reg, u16 val)
 {
 	int bus_addr, ret;
 	u8 buf[6];
@@ -333,7 +334,7 @@ static int i2c_mii_write_rollball(struct mii_bus *bus, int phy_id, int reg,
 		return 0;
 
 	buf[0] = ROLLBALL_DATA_ADDR;
-	buf[1] = (reg >> 16) & 0x1f;
+	buf[1] = devad;
 	buf[2] = (reg >> 8) & 0xff;
 	buf[3] = reg & 0xff;
 	buf[4] = val >> 8;
@@ -405,8 +406,8 @@ struct mii_bus *mdio_i2c_alloc(struct device *parent, struct i2c_adapter *i2c,
 			return ERR_PTR(ret);
 		}
 
-		mii->read = i2c_mii_read_rollball;
-		mii->write = i2c_mii_write_rollball;
+		mii->read_c45 = i2c_mii_read_rollball;
+		mii->write_c45 = i2c_mii_write_rollball;
 		break;
 	default:
 		mii->read = i2c_mii_read_default_c22;