spi: sc18is602: implement .max_{transfer,message}_size() for the controller

Allow SPI peripherals attached to this controller to know what is the
maximum transfer size and message size, so they can limit their transfer
lengths properly in case they are otherwise capable of larger transfer
sizes. For the sc18is602, this is 200 bytes in both cases, since as far
as I understand, it isn't possible to tell the controller to keep the
chip select asserted after the STOP command is sent.

The controller can support SPI messages larger than 200 bytes if
cs_change is set for individual transfers such that the portions with
chip select asserted are never longer than 200 bytes. What is not
supported is just SPI messages with a continuous chip select larger than
200. I don't think it is possible to express this using the current API,
so drivers which do send SPI messages with cs_change can safely just
look at the max_transfer_size limit.

An example of user for this is sja1105_xfer() in
drivers/net/dsa/sja1105/sja1105_spi.c which sends by default 64 * 4 =
256 byte transfers.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20210520131238.2903024-3-olteanv@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

drivers/spi/spi-sc18is602.c

@@ -219,6 +219,11 @@ static int sc18is602_transfer_one(struct spi_master *master,
 	return status;
 }
 
+static size_t sc18is602_max_transfer_size(struct spi_device *spi)
+{
+	return SC18IS602_BUFSIZ;
+}
+
 static int sc18is602_setup(struct spi_device *spi)
 {
 	struct sc18is602 *hw = spi_master_get_devdata(spi->master);
@@ -293,6 +298,8 @@ static int sc18is602_probe(struct i2c_client *client,
 	master->bits_per_word_mask = SPI_BPW_MASK(8);
 	master->setup = sc18is602_setup;
 	master->transfer_one_message = sc18is602_transfer_one;
+	master->max_transfer_size = sc18is602_max_transfer_size;
+	master->max_message_size = sc18is602_max_transfer_size;
 	master->dev.of_node = np;
 	master->min_speed_hz = hw->freq / 128;
 	master->max_speed_hz = hw->freq / 4;