Skip to content

L
linux
Commit b4eab4b8 authored by David Vrabel's avatar David Vrabel Committed by Thomas Gleixner
Browse files
Options

[MTD] Remove Elan-104NC 

Remove support for the Arcom Elan-104NC since it's no longer being maintained.
Signed-off-by: default avatarDavid Vrabel <dvrabel@arcom.com>
Signed-off-by: default avatarThomas Gleixner <tglx@linutronix.de>
parent 32f1a95d
Hide whitespace changes
Inline Side-by-side
Showing with 2 additions and 241 deletions
drivers/mtd/maps/Kconfig
View file @ b4eab4b8
# drivers/mtd/maps/Kconfig
# $Id: Kconfig,v 1.45 2005/02/27 21:50:21 ppopov Exp $
# $Id: Kconfig,v 1.46 2005/03/02 14:51:04 dvrabel Exp $
menu "Mapping drivers for chip access"
depends on MTD!=n
......@@ -122,16 +122,6 @@ config MTD_SBC_GXX
More info at
<http://www.arcomcontrols.com/products/icp/pc104/processors/SBC_GX1.htm>.
config MTD_ELAN_104NC
tristate "CFI Flash device mapped on Arcom ELAN-104NC"
depends on X86 && MTD_CFI_INTELEXT && MTD_PARTITIONS && MTD_COMPLEX_MAPPINGS
help
This provides a driver for the on-board flash of the Arcom Control
System's ELAN-104NC development board. By default the flash
is split into 3 partitions which are accessed as separate MTD
devices. This board utilizes Intel StrataFlash. More info at
<http://www.arcomcontrols.com/products/icp/pc104/processors/ELAN104NC.htm>.
config MTD_LUBBOCK
tristate "CFI Flash device mapped on Intel Lubbock XScale eval board"
depends on ARCH_LUBBOCK && MTD_CFI_INTELEXT && MTD_PARTITIONS
......
drivers/mtd/maps/Makefile
View file @ b4eab4b8
#
# linux/drivers/maps/Makefile
#
# $Id: Makefile.common,v 1.25 2005/02/27 21:50:21 ppopov Exp $
# $Id: Makefile.common,v 1.26 2005/03/02 14:51:04 dvrabel Exp $
ifeq ($(CONFIG_MTD_COMPLEX_MAPPINGS),y)
obj-$(CONFIG_MTD) += map_funcs.o
......@@ -15,7 +15,6 @@ obj-$(CONFIG_MTD_CFI_FLAGADM) += cfi_flagadm.o
obj-$(CONFIG_MTD_CSTM_MIPS_IXX) += cstm_mips_ixx.o
obj-$(CONFIG_MTD_DC21285) += dc21285.o
obj-$(CONFIG_MTD_DILNETPC) += dilnetpc.o
obj-$(CONFIG_MTD_ELAN_104NC) += elan-104nc.o
obj-$(CONFIG_MTD_EPXA10DB) += epxa10db-flash.o
obj-$(CONFIG_MTD_IQ80310) += iq80310.o
obj-$(CONFIG_MTD_L440GX) += l440gx.o
......
drivers/mtd/maps/elan-104nc.c deleted 100644 → 0
View file @ 32f1a95d
/* elan-104nc.c -- MTD map driver for Arcom Control Systems ELAN-104NC
Copyright (C) 2000 Arcom Control System Ltd
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
$Id: elan-104nc.c,v 1.25 2004/11/28 09:40:39 dwmw2 Exp $
The ELAN-104NC has up to 8 Mibyte of Intel StrataFlash (28F320/28F640) in x16
mode. This drivers uses the CFI probe and Intel Extended Command Set drivers.
The flash is accessed as follows:
32 kbyte memory window at 0xb0000-0xb7fff
16 bit I/O port (0x22) for some sort of paging.
The single flash device is divided into 3 partition which appear as separate
MTD devices.
Linux thinks that the I/O port is used by the PIC and hence check_region() will
always fail. So we don't do it. I just hope it doesn't break anything.
*/
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/ioport.h>
#include <linux/init.h>
#include <asm/io.h>
#include <linux/mtd/map.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#define WINDOW_START 0xb0000
/* Number of bits in offset. */
#define WINDOW_SHIFT 15
#define WINDOW_LENGTH (1 << WINDOW_SHIFT)
/* The bits for the offset into the window. */
#define WINDOW_MASK (WINDOW_LENGTH-1)
#define PAGE_IO 0x22
#define PAGE_IO_SIZE 2
static volatile int page_in_window = -1; // Current page in window.
static void __iomem *iomapadr;
static DEFINE_SPINLOCK(elan_104nc_spin);
/* partition_info gives details on the logical partitions that the split the
* single flash device into. If the size if zero we use up to the end of the
* device. */
static struct mtd_partition partition_info[]={
{ .name = "ELAN-104NC flash boot partition",
.offset = 0,
.size = 640*1024 },
{ .name = "ELAN-104NC flash partition 1",
.offset = 640*1024,
.size = 896*1024 },
{ .name = "ELAN-104NC flash partition 2",
.offset = (640+896)*1024 }
};
#define NUM_PARTITIONS (sizeof(partition_info)/sizeof(partition_info[0]))
/*
* If no idea what is going on here. This is taken from the FlashFX stuff.
*/
#define ROMCS 1
static inline void elan_104nc_setup(void)
{
u16 t;
outw( 0x0023 + ROMCS*2, PAGE_IO );
t=inb( PAGE_IO+1 );
t=(t & 0xf9) | 0x04;
outw( ((0x0023 + ROMCS*2) | (t << 8)), PAGE_IO );
}
static inline void elan_104nc_page(struct map_info *map, unsigned long ofs)
{
unsigned long page = ofs >> WINDOW_SHIFT;
if( page!=page_in_window ) {
int cmd1;
int cmd2;
cmd1=(page & 0x700) + 0x0833 + ROMCS*0x4000;
cmd2=((page & 0xff) << 8) + 0x0032;
outw( cmd1, PAGE_IO );
outw( cmd2, PAGE_IO );
page_in_window = page;
}
}
static map_word elan_104nc_read16(struct map_info *map, unsigned long ofs)
{
map_word ret;
spin_lock(&elan_104nc_spin);
elan_104nc_page(map, ofs);
ret.x[0] = readw(iomapadr + (ofs & WINDOW_MASK));
spin_unlock(&elan_104nc_spin);
return ret;
}
static void elan_104nc_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len)
{
while (len) {
unsigned long thislen = len;
if (len > (WINDOW_LENGTH - (from & WINDOW_MASK)))
thislen = WINDOW_LENGTH-(from & WINDOW_MASK);
spin_lock(&elan_104nc_spin);
elan_104nc_page(map, from);
memcpy_fromio(to, iomapadr + (from & WINDOW_MASK), thislen);
spin_unlock(&elan_104nc_spin);
to += thislen;
from += thislen;
len -= thislen;
}
}
static void elan_104nc_write16(struct map_info *map, map_word d, unsigned long adr)
{
spin_lock(&elan_104nc_spin);
elan_104nc_page(map, adr);
writew(d.x[0], iomapadr + (adr & WINDOW_MASK));
spin_unlock(&elan_104nc_spin);
}
static void elan_104nc_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len)
{
while(len) {
unsigned long thislen = len;
if (len > (WINDOW_LENGTH - (to & WINDOW_MASK)))
thislen = WINDOW_LENGTH-(to & WINDOW_MASK);
spin_lock(&elan_104nc_spin);
elan_104nc_page(map, to);
memcpy_toio(iomapadr + (to & WINDOW_MASK), from, thislen);
spin_unlock(&elan_104nc_spin);
to += thislen;
from += thislen;
len -= thislen;
}
}
static struct map_info elan_104nc_map = {
.name = "ELAN-104NC flash",
.phys = NO_XIP,
.size = 8*1024*1024, /* this must be set to a maximum possible amount
of flash so the cfi probe routines find all
the chips */
.bankwidth = 2,
.read = elan_104nc_read16,
.copy_from = elan_104nc_copy_from,
.write = elan_104nc_write16,
.copy_to = elan_104nc_copy_to
};
/* MTD device for all of the flash. */
static struct mtd_info *all_mtd;
static void cleanup_elan_104nc(void)
{
if( all_mtd ) {
del_mtd_partitions( all_mtd );
map_destroy( all_mtd );
}
iounmap(iomapadr);
}
static int __init init_elan_104nc(void)
{
/* Urg! We use I/O port 0x22 without request_region()ing it,
because it's already allocated to the PIC. */
iomapadr = ioremap(WINDOW_START, WINDOW_LENGTH);
if (!iomapadr) {
printk( KERN_ERR"%s: failed to ioremap memory region\n",
elan_104nc_map.name );
return -EIO;
}
printk( KERN_INFO"%s: IO:0x%x-0x%x MEM:0x%x-0x%x\n",
elan_104nc_map.name,
PAGE_IO, PAGE_IO+PAGE_IO_SIZE-1,
WINDOW_START, WINDOW_START+WINDOW_LENGTH-1 );
elan_104nc_setup();
/* Probe for chip. */
all_mtd = do_map_probe("cfi_probe", &elan_104nc_map );
if( !all_mtd ) {
cleanup_elan_104nc();
return -ENXIO;
}
all_mtd->owner = THIS_MODULE;
/* Create MTD devices for each partition. */
add_mtd_partitions( all_mtd, partition_info, NUM_PARTITIONS );
return 0;
}
module_init(init_elan_104nc);
module_exit(cleanup_elan_104nc);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Arcom Control Systems Ltd.");
MODULE_DESCRIPTION("MTD map driver for Arcom Control Systems ELAN-104NC");
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7