Merge branch 'octeontx2-af-CPT'

Srujana Challa says:

====================
octeontx2-af: Miscellaneous changes for CPT

This patchset consists of miscellaneous changes for CPT.
- Adds a new mailbox to reset the requested CPT LF.
- Modify FLR sequence as per HW team suggested.
- Adds support to recover CPT engines when they gets fault.
- Updates CPT inbound inline IPsec configuration mailbox,
  as per new generation of the OcteonTX2 chips.
- Adds a new mailbox to return CPT FLT Interrupt info.

---
v2:
- Addressed a review comment.
v1:
- Dropped patch "octeontx2-af: Fix interrupt name strings completely"
  to submit to net.
---
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/marvell/octeontx2/af/mbox.h

@@ -195,6 +195,9 @@ M(CPT_STATS,            0xA05, cpt_sts, cpt_sts_req, cpt_sts_rsp)	\
 M(CPT_RXC_TIME_CFG,     0xA06, cpt_rxc_time_cfg, cpt_rxc_time_cfg_req,  \
 			       msg_rsp)                                 \
 M(CPT_CTX_CACHE_SYNC,   0xA07, cpt_ctx_cache_sync, msg_req, msg_rsp)    \
+M(CPT_LF_RESET,         0xA08, cpt_lf_reset, cpt_lf_rst_req, msg_rsp)	\
+M(CPT_FLT_ENG_INFO,     0xA09, cpt_flt_eng_info, cpt_flt_eng_info_req,	\
+			       cpt_flt_eng_info_rsp)			\
 /* SDP mbox IDs (range 0x1000 - 0x11FF) */				\
 M(SET_SDP_CHAN_INFO, 0x1000, set_sdp_chan_info, sdp_chan_info_msg, msg_rsp) \
 M(GET_SDP_CHAN_INFO, 0x1001, get_sdp_chan_info, msg_req, sdp_get_chan_info_msg) \
@@ -1609,6 +1612,8 @@ struct cpt_lf_alloc_req_msg {
 	u16 sso_pf_func;
 	u16 eng_grpmsk;
 	int blkaddr;
+	u8 ctx_ilen_valid : 1;
+	u8 ctx_ilen : 7;
 };
 
 #define CPT_INLINE_INBOUND      0
@@ -1692,6 +1697,28 @@ struct cpt_inst_lmtst_req {
 	u64 rsvd;
 };
 
+/* Mailbox message format to request for CPT LF reset */
+struct cpt_lf_rst_req {
+	struct mbox_msghdr hdr;
+	u32 slot;
+	u32 rsvd;
+};
+
+/* Mailbox message format to request for CPT faulted engines */
+struct cpt_flt_eng_info_req {
+	struct mbox_msghdr hdr;
+	int blkaddr;
+	bool reset;
+	u32 rsvd;
+};
+
+struct cpt_flt_eng_info_rsp {
+	struct mbox_msghdr hdr;
+	u64 flt_eng_map[CPT_10K_AF_INT_VEC_RVU];
+	u64 rcvrd_eng_map[CPT_10K_AF_INT_VEC_RVU];
+	u64 rsvd;
+};
+
 struct sdp_node_info {
 	/* Node to which this PF belons to */
 	u8 node_id;

drivers/net/ethernet/marvell/octeontx2/af/rvu.c

@@ -1164,8 +1164,16 @@ static int rvu_setup_hw_resources(struct rvu *rvu)
 		goto nix_err;
 	}
 
+	err = rvu_cpt_init(rvu);
+	if (err) {
+		dev_err(rvu->dev, "%s: Failed to initialize cpt\n", __func__);
+		goto mcs_err;
+	}
+
 	return 0;
 
+mcs_err:
+	rvu_mcs_exit(rvu);
 nix_err:
 	rvu_nix_freemem(rvu);
 npa_err:

drivers/net/ethernet/marvell/octeontx2/af/rvu.h

@@ -108,6 +108,8 @@ struct rvu_block {
 	u64  lfreset_reg;
 	unsigned char name[NAME_SIZE];
 	struct rvu *rvu;
+	u64 cpt_flt_eng_map[3];
+	u64 cpt_rcvrd_eng_map[3];
 };
 
 struct nix_mcast {
@@ -459,6 +461,7 @@ struct rvu {
 	struct rvu_pfvf		*pf;
 	struct rvu_pfvf		*hwvf;
 	struct mutex		rsrc_lock; /* Serialize resource alloc/free */
+	struct mutex		alias_lock; /* Serialize bar2 alias access */
 	int			vfs; /* Number of VFs attached to RVU */
 	int			nix_blkaddr[MAX_NIX_BLKS];
 
@@ -510,6 +513,7 @@ struct rvu {
 	struct ptp		*ptp;
 
 	int			mcs_blk_cnt;
+	int			cpt_pf_num;
 
 #ifdef CONFIG_DEBUG_FS
 	struct rvu_debugfs	rvu_dbg;
@@ -524,6 +528,8 @@ struct rvu {
 	struct list_head	mcs_intrq_head;
 	/* mcs interrupt queue lock */
 	spinlock_t		mcs_intrq_lock;
+	/* CPT interrupt lock */
+	spinlock_t		cpt_intr_lock;
 };
 
 static inline void rvu_write64(struct rvu *rvu, u64 block, u64 offset, u64 val)
@@ -546,6 +552,17 @@ static inline u64 rvupf_read64(struct rvu *rvu, u64 offset)
 	return readq(rvu->pfreg_base + offset);
 }
 
+static inline void rvu_bar2_sel_write64(struct rvu *rvu, u64 block, u64 offset, u64 val)
+{
+	/* HW requires read back of RVU_AF_BAR2_SEL register to make sure completion of
+	 * write operation.
+	 */
+	rvu_write64(rvu, block, offset, val);
+	rvu_read64(rvu, block, offset);
+	/* Barrier to ensure read completes before accessing LF registers */
+	mb();
+}
+
 /* Silicon revisions */
 static inline bool is_rvu_pre_96xx_C0(struct rvu *rvu)
 {
@@ -865,6 +882,7 @@ void rvu_cpt_unregister_interrupts(struct rvu *rvu);
 int rvu_cpt_lf_teardown(struct rvu *rvu, u16 pcifunc, int blkaddr, int lf,
 			int slot);
 int rvu_cpt_ctx_flush(struct rvu *rvu, u16 pcifunc);
+int rvu_cpt_init(struct rvu *rvu);
 
 /* CN10K RVU */
 int rvu_set_channels_base(struct rvu *rvu);

drivers/net/ethernet/marvell/octeontx2/af/rvu_reg.h

@@ -545,6 +545,8 @@
 
 #define CPT_LF_CTL                      0x10
 #define CPT_LF_INPROG                   0x40
+#define CPT_LF_Q_SIZE                   0x100
+#define CPT_LF_Q_INST_PTR               0x110
 #define CPT_LF_Q_GRP_PTR                0x120
 #define CPT_LF_CTX_FLUSH                0x510