Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6:
  mfd: Fix for the TWL4030 PM sleep/wakeup sequence
  mfd: Fix asic3 build error
  mfd: Fixed gpio polarity of omap-usb gpio USB-phy reset

drivers/mfd/asic3.c

@@ -144,7 +144,7 @@ static void asic3_irq_demux(unsigned int irq, struct irq_desc *desc)
 	int iter, i;
 	unsigned long flags;
 
-	data->chip->irq_ack(irq_data);
+	data->chip->irq_ack(data);
 
 	for (iter = 0 ; iter < MAX_ASIC_ISR_LOOPS; iter++) {
 		u32 status;

drivers/mfd/omap-usb-host.c

@@ -717,14 +717,14 @@ static int usbhs_enable(struct device *dev)
 			gpio_request(pdata->ehci_data->reset_gpio_port[0],
 						"USB1 PHY reset");
 			gpio_direction_output
-				(pdata->ehci_data->reset_gpio_port[0], 1);
+				(pdata->ehci_data->reset_gpio_port[0], 0);
 		}
 
 		if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1])) {
 			gpio_request(pdata->ehci_data->reset_gpio_port[1],
 						"USB2 PHY reset");
 			gpio_direction_output
-				(pdata->ehci_data->reset_gpio_port[1], 1);
+				(pdata->ehci_data->reset_gpio_port[1], 0);
 		}
 
 		/* Hold the PHY in RESET for enough time till DIR is high */
@@ -904,11 +904,11 @@ static int usbhs_enable(struct device *dev)
 
 		if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0]))
 			gpio_set_value
-				(pdata->ehci_data->reset_gpio_port[0], 0);
+				(pdata->ehci_data->reset_gpio_port[0], 1);
 
 		if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1]))
 			gpio_set_value
-				(pdata->ehci_data->reset_gpio_port[1], 0);
+				(pdata->ehci_data->reset_gpio_port[1], 1);
 	}
 
 end_count:

drivers/mfd/twl4030-power.c

@@ -447,12 +447,13 @@ static int __init load_twl4030_script(struct twl4030_script *tscript,
 		if (err)
 			goto out;
 	}
-	if (tscript->flags & TWL4030_SLEEP_SCRIPT)
+	if (tscript->flags & TWL4030_SLEEP_SCRIPT) {
 		if (order)
 			pr_warning("TWL4030: Bad order of scripts (sleep "\
 					"script before wakeup) Leads to boot"\
 					"failure on some boards\n");
 		err = twl4030_config_sleep_sequence(address);
+	}
 out:
 	return err;
 }