Commit b514fb28 authored by Sebastian Hesselbarth's avatar Sebastian Hesselbarth Committed by Jason Cooper

ARM: dts: kirkwood: fix phy-connection-type for Guruplug

Commit eeb84545
 ("ARM: dts: kirkwood: set Guruplug phy-connection-type to rgmii-id")
added phy-connection-type properties to ethernet PHY nodes.

Actually, the property has to be set for the ethernet port node instead.
Fix it by moving the corresponding properties to the correct nodes.
Signed-off-by: default avatarSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Link: https://lkml.kernel.org/r/1403555115-13111-1-git-send-email-sebastian.hesselbarth@gmail.com
Fixes: eeb84545: ('ARM: dts: kirkwood: set Guruplug phy-connection-type to rgmii-id')
Cc: <stable@vger.kernel.org> # v3.16+
Signed-off-by: default avatarJason Cooper <jason@lakedaemon.net>
parent 52fcc567
...@@ -105,7 +105,6 @@ ethphy0: ethernet-phy@0 { ...@@ -105,7 +105,6 @@ ethphy0: ethernet-phy@0 {
compatible = "ethernet-phy-id0141.0cb0", compatible = "ethernet-phy-id0141.0cb0",
"ethernet-phy-ieee802.3-c22"; "ethernet-phy-ieee802.3-c22";
reg = <0>; reg = <0>;
phy-connection-type = "rgmii-id";
}; };
ethphy1: ethernet-phy@1 { ethphy1: ethernet-phy@1 {
...@@ -113,7 +112,6 @@ ethphy1: ethernet-phy@1 { ...@@ -113,7 +112,6 @@ ethphy1: ethernet-phy@1 {
compatible = "ethernet-phy-id0141.0cb0", compatible = "ethernet-phy-id0141.0cb0",
"ethernet-phy-ieee802.3-c22"; "ethernet-phy-ieee802.3-c22";
reg = <1>; reg = <1>;
phy-connection-type = "rgmii-id";
}; };
}; };
...@@ -121,6 +119,7 @@ &eth0 { ...@@ -121,6 +119,7 @@ &eth0 {
status = "okay"; status = "okay";
ethernet0-port@0 { ethernet0-port@0 {
phy-handle = <&ethphy0>; phy-handle = <&ethphy0>;
phy-connection-type = "rgmii-id";
}; };
}; };
...@@ -128,5 +127,6 @@ &eth1 { ...@@ -128,5 +127,6 @@ &eth1 {
status = "okay"; status = "okay";
ethernet1-port@0 { ethernet1-port@0 {
phy-handle = <&ethphy1>; phy-handle = <&ethphy1>;
phy-connection-type = "rgmii-id";
}; };
}; };
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment