Commit b524c904 authored by Josh Boyer's avatar Josh Boyer Committed by Ben Hutchings

USB: serial: ftdi_sio: Add support for ICP DAS I-756xU devices

commit ea6db90e upstream.

A Fedora user reports that the ftdi_sio driver works properly for the
ICP DAS I-7561U device.  Further, the user manual for these devices
instructs users to load the driver and add the ids using the sysfs
interface.

Add support for these in the driver directly so that the devices work
out of the box instead of needing manual configuration.

Reported-by: <thesource@mail.ru>
Signed-off-by: default avatarJosh Boyer <jwboyer@fedoraproject.org>
Signed-off-by: default avatarJohan Hovold <johan@kernel.org>
Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
parent bb91d38d
...@@ -1017,6 +1017,10 @@ static const struct usb_device_id id_table_combined[] = { ...@@ -1017,6 +1017,10 @@ static const struct usb_device_id id_table_combined[] = {
{ USB_DEVICE(FTDI_VID, CHETCO_SEASMART_DISPLAY_PID) }, { USB_DEVICE(FTDI_VID, CHETCO_SEASMART_DISPLAY_PID) },
{ USB_DEVICE(FTDI_VID, CHETCO_SEASMART_LITE_PID) }, { USB_DEVICE(FTDI_VID, CHETCO_SEASMART_LITE_PID) },
{ USB_DEVICE(FTDI_VID, CHETCO_SEASMART_ANALOG_PID) }, { USB_DEVICE(FTDI_VID, CHETCO_SEASMART_ANALOG_PID) },
/* ICP DAS I-756xU devices */
{ USB_DEVICE(ICPDAS_VID, ICPDAS_I7560U_PID) },
{ USB_DEVICE(ICPDAS_VID, ICPDAS_I7561U_PID) },
{ USB_DEVICE(ICPDAS_VID, ICPDAS_I7563U_PID) },
{ } /* Terminating entry */ { } /* Terminating entry */
}; };
......
...@@ -871,6 +871,14 @@ ...@@ -871,6 +871,14 @@
#define NOVITUS_VID 0x1a28 #define NOVITUS_VID 0x1a28
#define NOVITUS_BONO_E_PID 0x6010 #define NOVITUS_BONO_E_PID 0x6010
/*
* ICPDAS I-756*U devices
*/
#define ICPDAS_VID 0x1b5c
#define ICPDAS_I7560U_PID 0x0103
#define ICPDAS_I7561U_PID 0x0104
#define ICPDAS_I7563U_PID 0x0105
/* /*
* RT Systems programming cables for various ham radios * RT Systems programming cables for various ham radios
*/ */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment