mwifiex: increase the number of nodes in command pool

Command nodes are increased from 20 to 50. Now we can always
scan 1 channel per scan command to avoid traffic delay/loss in
connected state. We will get rid of *CHANNEL_PER_SCAN_CMD macros
used due to command node constraints.
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/mwifiex/ioctl.h

@@ -303,7 +303,7 @@ struct mwifiex_ds_ant_cfg {
 	u32 rx_ant;
 };
 
-#define MWIFIEX_NUM_OF_CMD_BUFFER	20
+#define MWIFIEX_NUM_OF_CMD_BUFFER	50
 #define MWIFIEX_SIZE_OF_CMD_BUFFER	2048
 
 enum {

drivers/net/wireless/mwifiex/scan.c

@@ -29,9 +29,6 @@
 #define MWIFIEX_MAX_CHANNELS_PER_SPECIFIC_SCAN   14
 
 #define MWIFIEX_DEF_CHANNELS_PER_SCAN_CMD	4
-#define MWIFIEX_LIMIT_1_CHANNEL_PER_SCAN_CMD	15
-#define MWIFIEX_LIMIT_2_CHANNELS_PER_SCAN_CMD	27
-#define MWIFIEX_LIMIT_3_CHANNELS_PER_SCAN_CMD	35
 
 /* Memory needed to store a max sized Channel List TLV for a firmware scan */
 #define CHAN_TLV_MAX_SIZE  (sizeof(struct mwifiex_ie_types_header)         \
@@ -1055,20 +1052,10 @@ mwifiex_config_scan(struct mwifiex_private *priv,
 
 	/*
 	 * In associated state we will reduce the number of channels scanned per
-	 * scan command to avoid any traffic delay/loss. This number is decided
-	 * based on total number of channels to be scanned due to constraints
-	 * of command buffers.
+	 * scan command to 1 to avoid any traffic delay/loss.
 	 */
-	if (priv->media_connected) {
-		if (chan_num < MWIFIEX_LIMIT_1_CHANNEL_PER_SCAN_CMD)
+	if (priv->media_connected)
 			*max_chan_per_scan = 1;
-		else if (chan_num < MWIFIEX_LIMIT_2_CHANNELS_PER_SCAN_CMD)
-			*max_chan_per_scan = 2;
-		else if (chan_num < MWIFIEX_LIMIT_3_CHANNELS_PER_SCAN_CMD)
-			*max_chan_per_scan = 3;
-		else
-			*max_chan_per_scan = 4;
-	}
 }
 
 /*