Commit b57cb723 authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu

Pull m68knommu arch updates from Greg Ungerer:
 "Includes a cleanup of the non-MMU linker script (it now almost
  exclusively uses the well defined linker script support macros and
  definitions).  Some more merging of MMU and non-MMU common files
  (specifically the arch process.c, ptrace and time.c).  And a big
  cleanup of the massively duplicated ColdFire device definition code.

  Overall we remove about 2000 lines of code, and end up with a single
  set of platform device definitions for the serial ports, ethernet
  ports and QSPI ports common in most ColdFire SoCs.

  I expect you will get a merge conflict on arch/m68k/kernel/process.c,
  in cpu_idle().  It should be relatively strait forward to fixup."

And cpu_idle() conflict resolution was indeed trivial (merging the
nommu/mmu versions of process.c trivially conflicting with the
conversion to use the schedule_preempt_disabled() helper function)

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: (57 commits)
  m68knommu: factor more common ColdFire cpu reset code
  m68knommu: make 528x CPU reset register addressing consistent
  m68knommu: make 527x CPU reset register addressing consistent
  m68knommu: make 523x CPU reset register addressing consistent
  m68knommu: factor some common ColdFire cpu reset code
  m68knommu: move old ColdFire timers init from CPU init to timers code
  m68knommu: clean up init code in ColdFire 532x startup
  m68knommu: clean up init code in ColdFire 528x startup
  m68knommu: clean up init code in ColdFire 523x startup
  m68knommu: merge common ColdFire QSPI platform setup code
  m68knommu: make 532x QSPI platform addressing consistent
  m68knommu: make 528x QSPI platform addressing consistent
  m68knommu: make 527x QSPI platform addressing consistent
  m68knommu: make 5249 QSPI platform addressing consistent
  m68knommu: make 523x QSPI platform addressing consistent
  m68knommu: make 520x QSPI platform addressing consistent
  m68knommu: merge common ColdFire FEC platform setup code
  m68knommu: make 532x FEC platform addressing consistent
  m68knommu: make 528x FEC platform addressing consistent
  m68knommu: make 527x FEC platform addressing consistent
  ...
parents ad12ab25 ae909ea4
...@@ -7,6 +7,7 @@ config M68K ...@@ -7,6 +7,7 @@ config M68K
select GENERIC_IRQ_SHOW select GENERIC_IRQ_SHOW
select ARCH_HAVE_NMI_SAFE_CMPXCHG if RMW_INSNS select ARCH_HAVE_NMI_SAFE_CMPXCHG if RMW_INSNS
select GENERIC_CPU_DEVICES select GENERIC_CPU_DEVICES
select FPU if MMU
config RWSEM_GENERIC_SPINLOCK config RWSEM_GENERIC_SPINLOCK
bool bool
...@@ -24,9 +25,6 @@ config ARCH_HAS_ILOG2_U64 ...@@ -24,9 +25,6 @@ config ARCH_HAS_ILOG2_U64
config GENERIC_CLOCKEVENTS config GENERIC_CLOCKEVENTS
bool bool
config GENERIC_CMOS_UPDATE
def_bool !MMU
config GENERIC_GPIO config GENERIC_GPIO
bool bool
...@@ -67,6 +65,9 @@ config CPU_HAS_NO_MULDIV64 ...@@ -67,6 +65,9 @@ config CPU_HAS_NO_MULDIV64
config CPU_HAS_ADDRESS_SPACES config CPU_HAS_ADDRESS_SPACES
bool bool
config FPU
bool
config HZ config HZ
int int
default 1000 if CLEOPATRA default 1000 if CLEOPATRA
......
...@@ -100,11 +100,11 @@ ...@@ -100,11 +100,11 @@
#define MCFDMA_BASE1 (MCF_MBAR + 0x240) /* Base address DMA 1 */ #define MCFDMA_BASE1 (MCF_MBAR + 0x240) /* Base address DMA 1 */
#if defined(CONFIG_NETtel) #if defined(CONFIG_NETtel)
#define MCFUART_BASE1 0x180 /* Base address of UART1 */ #define MCFUART_BASE0 (MCF_MBAR + 0x180) /* Base address UART0 */
#define MCFUART_BASE2 0x140 /* Base address of UART2 */ #define MCFUART_BASE1 (MCF_MBAR + 0x140) /* Base address UART1 */
#else #else
#define MCFUART_BASE1 0x140 /* Base address of UART1 */ #define MCFUART_BASE0 (MCF_MBAR + 0x140) /* Base address UART0 */
#define MCFUART_BASE2 0x180 /* Base address of UART2 */ #define MCFUART_BASE1 (MCF_MBAR + 0x180) /* Base address UART1 */
#endif #endif
/* /*
...@@ -112,6 +112,8 @@ ...@@ -112,6 +112,8 @@
*/ */
#define MCF_IRQ_TIMER 30 /* Timer0, Level 6 */ #define MCF_IRQ_TIMER 30 /* Timer0, Level 6 */
#define MCF_IRQ_PROFILER 31 /* Timer1, Level 7 */ #define MCF_IRQ_PROFILER 31 /* Timer1, Level 7 */
#define MCF_IRQ_UART0 73 /* UART0 */
#define MCF_IRQ_UART1 74 /* UART1 */
/* /*
* Generic GPIO * Generic GPIO
......
...@@ -48,8 +48,21 @@ ...@@ -48,8 +48,21 @@
#define MCFINT_UART1 27 /* Interrupt number for UART1 */ #define MCFINT_UART1 27 /* Interrupt number for UART1 */
#define MCFINT_UART2 28 /* Interrupt number for UART2 */ #define MCFINT_UART2 28 /* Interrupt number for UART2 */
#define MCFINT_QSPI 31 /* Interrupt number for QSPI */ #define MCFINT_QSPI 31 /* Interrupt number for QSPI */
#define MCFINT_FECRX0 36 /* Interrupt number for FEC RX */
#define MCFINT_FECTX0 40 /* Interrupt number for FEC RX */
#define MCFINT_FECENTC0 42 /* Interrupt number for FEC RX */
#define MCFINT_PIT1 4 /* Interrupt number for PIT1 (PIT0 in processor) */ #define MCFINT_PIT1 4 /* Interrupt number for PIT1 (PIT0 in processor) */
#define MCF_IRQ_UART0 (MCFINT_VECBASE + MCFINT_UART0)
#define MCF_IRQ_UART1 (MCFINT_VECBASE + MCFINT_UART1)
#define MCF_IRQ_UART2 (MCFINT_VECBASE + MCFINT_UART2)
#define MCF_IRQ_FECRX0 (MCFINT_VECBASE + MCFINT_FECRX0)
#define MCF_IRQ_FECTX0 (MCFINT_VECBASE + MCFINT_FECTX0)
#define MCF_IRQ_FECENTC0 (MCFINT_VECBASE + MCFINT_FECENTC0)
#define MCF_IRQ_QSPI (MCFINT_VECBASE + MCFINT_QSPI)
/* /*
* SDRAM configuration registers. * SDRAM configuration registers.
*/ */
...@@ -144,15 +157,25 @@ ...@@ -144,15 +157,25 @@
/* /*
* UART module. * UART module.
*/ */
#define MCFUART_BASE1 0xFC060000 /* Base address of UART1 */ #define MCFUART_BASE0 0xFC060000 /* Base address of UART0 */
#define MCFUART_BASE2 0xFC064000 /* Base address of UART2 */ #define MCFUART_BASE1 0xFC064000 /* Base address of UART1 */
#define MCFUART_BASE3 0xFC068000 /* Base address of UART2 */ #define MCFUART_BASE2 0xFC068000 /* Base address of UART2 */
/* /*
* FEC module. * FEC module.
*/ */
#define MCFFEC_BASE 0xFC030000 /* Base of FEC ethernet */ #define MCFFEC_BASE0 0xFC030000 /* Base of FEC ethernet */
#define MCFFEC_SIZE 0x800 /* Register set size */ #define MCFFEC_SIZE0 0x800 /* Register set size */
/*
* QSPI module.
*/
#define MCFQSPI_BASE 0xFC05C000 /* Base of QSPI module */
#define MCFQSPI_SIZE 0x40 /* Register set size */
#define MCFQSPI_CS0 46
#define MCFQSPI_CS1 47
#define MCFQSPI_CS2 27
/* /*
* Reset Control Unit. * Reset Control Unit.
......
...@@ -35,8 +35,23 @@ ...@@ -35,8 +35,23 @@
#define MCFINT_VECBASE 64 /* Vector base number */ #define MCFINT_VECBASE 64 /* Vector base number */
#define MCFINT_UART0 13 /* Interrupt number for UART0 */ #define MCFINT_UART0 13 /* Interrupt number for UART0 */
#define MCFINT_PIT1 36 /* Interrupt number for PIT1 */ #define MCFINT_UART1 14 /* Interrupt number for UART1 */
#define MCFINT_UART2 15 /* Interrupt number for UART2 */
#define MCFINT_QSPI 18 /* Interrupt number for QSPI */ #define MCFINT_QSPI 18 /* Interrupt number for QSPI */
#define MCFINT_FECRX0 23 /* Interrupt number for FEC */
#define MCFINT_FECTX0 27 /* Interrupt number for FEC */
#define MCFINT_FECENTC0 29 /* Interrupt number for FEC */
#define MCFINT_PIT1 36 /* Interrupt number for PIT1 */
#define MCF_IRQ_UART0 (MCFINT_VECBASE + MCFINT_UART0)
#define MCF_IRQ_UART1 (MCFINT_VECBASE + MCFINT_UART1)
#define MCF_IRQ_UART2 (MCFINT_VECBASE + MCFINT_UART2)
#define MCF_IRQ_FECRX0 (MCFINT_VECBASE + MCFINT_FECRX0)
#define MCF_IRQ_FECTX0 (MCFINT_VECBASE + MCFINT_FECTX0)
#define MCF_IRQ_FECENTC0 (MCFINT_VECBASE + MCFINT_FECENTC0)
#define MCF_IRQ_QSPI (MCFINT_VECBASE + MCFINT_QSPI)
/* /*
* SDRAM configuration registers. * SDRAM configuration registers.
...@@ -50,8 +65,8 @@ ...@@ -50,8 +65,8 @@
/* /*
* Reset Control Unit (relative to IPSBAR). * Reset Control Unit (relative to IPSBAR).
*/ */
#define MCF_RCR 0x110000 #define MCF_RCR (MCF_IPSBAR + 0x110000)
#define MCF_RSR 0x110001 #define MCF_RSR (MCF_IPSBAR + 0x110001)
#define MCF_RCR_SWRESET 0x80 /* Software reset bit */ #define MCF_RCR_SWRESET 0x80 /* Software reset bit */
#define MCF_RCR_FRCSTOUT 0x40 /* Force external reset */ #define MCF_RCR_FRCSTOUT 0x40 /* Force external reset */
...@@ -59,15 +74,26 @@ ...@@ -59,15 +74,26 @@
/* /*
* UART module. * UART module.
*/ */
#define MCFUART_BASE1 (MCF_IPSBAR + 0x200) #define MCFUART_BASE0 (MCF_IPSBAR + 0x200)
#define MCFUART_BASE2 (MCF_IPSBAR + 0x240) #define MCFUART_BASE1 (MCF_IPSBAR + 0x240)
#define MCFUART_BASE3 (MCF_IPSBAR + 0x280) #define MCFUART_BASE2 (MCF_IPSBAR + 0x280)
/* /*
* FEC ethernet module. * FEC ethernet module.
*/ */
#define MCFFEC_BASE (MCF_IPSBAR + 0x1000) #define MCFFEC_BASE0 (MCF_IPSBAR + 0x1000)
#define MCFFEC_SIZE 0x800 #define MCFFEC_SIZE0 0x800
/*
* QSPI module.
*/
#define MCFQSPI_BASE (MCF_IPSBAR + 0x340)
#define MCFQSPI_SIZE 0x40
#define MCFQSPI_CS0 91
#define MCFQSPI_CS1 92
#define MCFQSPI_CS2 103
#define MCFQSPI_CS3 99
/* /*
* GPIO module. * GPIO module.
......
...@@ -76,8 +76,19 @@ ...@@ -76,8 +76,19 @@
/* /*
* UART module. * UART module.
*/ */
#define MCFUART_BASE1 0x1c0 /* Base address of UART1 */ #define MCFUART_BASE0 (MCF_MBAR + 0x1c0) /* Base address UART0 */
#define MCFUART_BASE2 0x200 /* Base address of UART2 */ #define MCFUART_BASE1 (MCF_MBAR + 0x200) /* Base address UART1 */
/*
* QSPI module.
*/
#define MCFQSPI_BASE (MCF_MBAR + 0x300) /* Base address QSPI */
#define MCFQSPI_SIZE 0x40 /* Register set size */
#define MCFQSPI_CS0 29
#define MCFQSPI_CS1 24
#define MCFQSPI_CS2 21
#define MCFQSPI_CS3 22
/* /*
* DMA unit base addresses. * DMA unit base addresses.
...@@ -108,6 +119,9 @@ ...@@ -108,6 +119,9 @@
#define MCF_IRQ_TIMER 30 /* Timer0, Level 6 */ #define MCF_IRQ_TIMER 30 /* Timer0, Level 6 */
#define MCF_IRQ_PROFILER 31 /* Timer1, Level 7 */ #define MCF_IRQ_PROFILER 31 /* Timer1, Level 7 */
#define MCF_IRQ_UART0 73 /* UART0 */
#define MCF_IRQ_UART1 74 /* UART1 */
/* /*
* General purpose IO registers (in MBAR2). * General purpose IO registers (in MBAR2).
*/ */
......
...@@ -68,8 +68,8 @@ ...@@ -68,8 +68,8 @@
#define MCFSIM_DCMR1 0x5c /* DRAM 1 Mask reg (r/w) */ #define MCFSIM_DCMR1 0x5c /* DRAM 1 Mask reg (r/w) */
#define MCFSIM_DCCR1 0x63 /* DRAM 1 Control reg (r/w) */ #define MCFSIM_DCCR1 0x63 /* DRAM 1 Control reg (r/w) */
#define MCFUART_BASE1 0x100 /* Base address of UART1 */ #define MCFUART_BASE0 (MCF_MBAR + 0x100) /* Base address UART0 */
#define MCFUART_BASE2 0x140 /* Base address of UART2 */ #define MCFUART_BASE1 (MCF_MBAR + 0x140) /* Base address UART1 */
#define MCFSIM_PACNT (MCF_MBAR + 0x80) /* Port A Control (r/w) */ #define MCFSIM_PACNT (MCF_MBAR + 0x80) /* Port A Control (r/w) */
#define MCFSIM_PADDR (MCF_MBAR + 0x84) /* Port A Direction (r/w) */ #define MCFSIM_PADDR (MCF_MBAR + 0x84) /* Port A Direction (r/w) */
...@@ -88,6 +88,9 @@ ...@@ -88,6 +88,9 @@
#define MCFTIMER_BASE3 (MCF_MBAR + 0x240) /* Base address TIMER4 */ #define MCFTIMER_BASE3 (MCF_MBAR + 0x240) /* Base address TIMER4 */
#define MCFTIMER_BASE4 (MCF_MBAR + 0x260) /* Base address TIMER3 */ #define MCFTIMER_BASE4 (MCF_MBAR + 0x260) /* Base address TIMER3 */
#define MCFFEC_BASE0 (MCF_MBAR + 0x840) /* Base FEC ethernet */
#define MCFFEC_SIZE0 0x1d0
/* /*
* Define system peripheral IRQ usage. * Define system peripheral IRQ usage.
*/ */
...@@ -101,8 +104,8 @@ ...@@ -101,8 +104,8 @@
#define MCF_IRQ_TIMER2 70 /* Timer 2 */ #define MCF_IRQ_TIMER2 70 /* Timer 2 */
#define MCF_IRQ_TIMER3 71 /* Timer 3 */ #define MCF_IRQ_TIMER3 71 /* Timer 3 */
#define MCF_IRQ_TIMER4 72 /* Timer 4 */ #define MCF_IRQ_TIMER4 72 /* Timer 4 */
#define MCF_IRQ_UART1 73 /* UART 1 */ #define MCF_IRQ_UART0 73 /* UART 0 */
#define MCF_IRQ_UART2 74 /* UART 2 */ #define MCF_IRQ_UART1 74 /* UART 1 */
#define MCF_IRQ_PLIP 75 /* PLIC 2Khz Periodic */ #define MCF_IRQ_PLIP 75 /* PLIC 2Khz Periodic */
#define MCF_IRQ_PLIA 76 /* PLIC Asynchronous */ #define MCF_IRQ_PLIA 76 /* PLIC Asynchronous */
#define MCF_IRQ_USB0 77 /* USB Endpoint 0 */ #define MCF_IRQ_USB0 77 /* USB Endpoint 0 */
...@@ -114,9 +117,9 @@ ...@@ -114,9 +117,9 @@
#define MCF_IRQ_USB6 83 /* USB Endpoint 6 */ #define MCF_IRQ_USB6 83 /* USB Endpoint 6 */
#define MCF_IRQ_USB7 84 /* USB Endpoint 7 */ #define MCF_IRQ_USB7 84 /* USB Endpoint 7 */
#define MCF_IRQ_DMA 85 /* DMA Controller */ #define MCF_IRQ_DMA 85 /* DMA Controller */
#define MCF_IRQ_ERX 86 /* Ethernet Receiver */ #define MCF_IRQ_FECRX0 86 /* Ethernet Receiver */
#define MCF_IRQ_ETX 87 /* Ethernet Transmitter */ #define MCF_IRQ_FECTX0 87 /* Ethernet Transmitter */
#define MCF_IRQ_ENTC 88 /* Ethernet Non-Time Critical */ #define MCF_IRQ_FECENTC0 88 /* Ethernet Non-Time Critical */
#define MCF_IRQ_QSPI 89 /* Queued Serial Interface */ #define MCF_IRQ_QSPI 89 /* Queued Serial Interface */
#define MCF_IRQ_EINT5 90 /* External Interrupt 5 */ #define MCF_IRQ_EINT5 90 /* External Interrupt 5 */
#define MCF_IRQ_EINT6 91 /* External Interrupt 6 */ #define MCF_IRQ_EINT6 91 /* External Interrupt 6 */
......
...@@ -38,8 +38,29 @@ ...@@ -38,8 +38,29 @@
#define MCFINT_UART1 14 /* Interrupt number for UART1 */ #define MCFINT_UART1 14 /* Interrupt number for UART1 */
#define MCFINT_UART2 15 /* Interrupt number for UART2 */ #define MCFINT_UART2 15 /* Interrupt number for UART2 */
#define MCFINT_QSPI 18 /* Interrupt number for QSPI */ #define MCFINT_QSPI 18 /* Interrupt number for QSPI */
#define MCFINT_FECRX0 23 /* Interrupt number for FEC0 */
#define MCFINT_FECTX0 27 /* Interrupt number for FEC0 */
#define MCFINT_FECENTC0 29 /* Interrupt number for FEC0 */
#define MCFINT_PIT1 36 /* Interrupt number for PIT1 */ #define MCFINT_PIT1 36 /* Interrupt number for PIT1 */
#define MCFINT2_VECBASE 128 /* Vector base number 2 */
#define MCFINT2_FECRX1 23 /* Interrupt number for FEC1 */
#define MCFINT2_FECTX1 27 /* Interrupt number for FEC1 */
#define MCFINT2_FECENTC1 29 /* Interrupt number for FEC1 */
#define MCF_IRQ_UART0 (MCFINT_VECBASE + MCFINT_UART0)
#define MCF_IRQ_UART1 (MCFINT_VECBASE + MCFINT_UART1)
#define MCF_IRQ_UART2 (MCFINT_VECBASE + MCFINT_UART2)
#define MCF_IRQ_FECRX0 (MCFINT_VECBASE + MCFINT_FECRX0)
#define MCF_IRQ_FECTX0 (MCFINT_VECBASE + MCFINT_FECTX0)
#define MCF_IRQ_FECENTC0 (MCFINT_VECBASE + MCFINT_FECENTC0)
#define MCF_IRQ_FECRX1 (MCFINT2_VECBASE + MCFINT2_FECRX1)
#define MCF_IRQ_FECTX1 (MCFINT2_VECBASE + MCFINT2_FECTX1)
#define MCF_IRQ_FECENTC1 (MCFINT2_VECBASE + MCFINT2_FECENTC1)
#define MCF_IRQ_QSPI (MCFINT_VECBASE + MCFINT_QSPI)
/* /*
* SDRAM configuration registers. * SDRAM configuration registers.
*/ */
...@@ -72,9 +93,9 @@ ...@@ -72,9 +93,9 @@
/* /*
* UART module. * UART module.
*/ */
#define MCFUART_BASE1 (MCF_IPSBAR + 0x200) #define MCFUART_BASE0 (MCF_IPSBAR + 0x200)
#define MCFUART_BASE2 (MCF_IPSBAR + 0x240) #define MCFUART_BASE1 (MCF_IPSBAR + 0x240)
#define MCFUART_BASE3 (MCF_IPSBAR + 0x280) #define MCFUART_BASE2 (MCF_IPSBAR + 0x280)
/* /*
* FEC ethernet module. * FEC ethernet module.
...@@ -84,6 +105,28 @@ ...@@ -84,6 +105,28 @@
#define MCFFEC_BASE1 (MCF_IPSBAR + 0x1800) #define MCFFEC_BASE1 (MCF_IPSBAR + 0x1800)
#define MCFFEC_SIZE1 0x800 #define MCFFEC_SIZE1 0x800
/*
* QSPI module.
*/
#define MCFQSPI_BASE (MCF_IPSBAR + 0x340)
#define MCFQSPI_SIZE 0x40
#ifdef CONFIG_M5271
#define MCFQSPI_CS0 91
#define MCFQSPI_CS1 92
#define MCFQSPI_CS2 99
#define MCFQSPI_CS3 103
#endif
#ifdef CONFIG_M5275
#define MCFQSPI_CS0 59
#define MCFQSPI_CS1 60
#define MCFQSPI_CS2 61
#define MCFQSPI_CS3 62
#endif
/*
* GPIO module.
*/
#ifdef CONFIG_M5271 #ifdef CONFIG_M5271
#define MCFGPIO_PODR_ADDR (MCF_IPSBAR + 0x100000) #define MCFGPIO_PODR_ADDR (MCF_IPSBAR + 0x100000)
#define MCFGPIO_PODR_DATAH (MCF_IPSBAR + 0x100001) #define MCFGPIO_PODR_DATAH (MCF_IPSBAR + 0x100001)
...@@ -285,8 +328,8 @@ ...@@ -285,8 +328,8 @@
/* /*
* Reset Control Unit (relative to IPSBAR). * Reset Control Unit (relative to IPSBAR).
*/ */
#define MCF_RCR 0x110000 #define MCF_RCR (MCF_IPSBAR + 0x110000)
#define MCF_RSR 0x110001 #define MCF_RSR (MCF_IPSBAR + 0x110001)
#define MCF_RCR_SWRESET 0x80 /* Software reset bit */ #define MCF_RCR_SWRESET 0x80 /* Software reset bit */
#define MCF_RCR_FRCSTOUT 0x40 /* Force external reset */ #define MCF_RCR_FRCSTOUT 0x40 /* Force external reset */
......
...@@ -35,9 +35,24 @@ ...@@ -35,9 +35,24 @@
#define MCFINT_VECBASE 64 /* Vector base number */ #define MCFINT_VECBASE 64 /* Vector base number */
#define MCFINT_UART0 13 /* Interrupt number for UART0 */ #define MCFINT_UART0 13 /* Interrupt number for UART0 */
#define MCFINT_UART1 14 /* Interrupt number for UART1 */
#define MCFINT_UART2 15 /* Interrupt number for UART2 */
#define MCFINT_QSPI 18 /* Interrupt number for QSPI */ #define MCFINT_QSPI 18 /* Interrupt number for QSPI */
#define MCFINT_FECRX0 23 /* Interrupt number for FEC */
#define MCFINT_FECTX0 27 /* Interrupt number for FEC */
#define MCFINT_FECENTC0 29 /* Interrupt number for FEC */
#define MCFINT_PIT1 55 /* Interrupt number for PIT1 */ #define MCFINT_PIT1 55 /* Interrupt number for PIT1 */
#define MCF_IRQ_UART0 (MCFINT_VECBASE + MCFINT_UART0)
#define MCF_IRQ_UART1 (MCFINT_VECBASE + MCFINT_UART1)
#define MCF_IRQ_UART2 (MCFINT_VECBASE + MCFINT_UART2)
#define MCF_IRQ_FECRX0 (MCFINT_VECBASE + MCFINT_FECRX0)
#define MCF_IRQ_FECTX0 (MCFINT_VECBASE + MCFINT_FECTX0)
#define MCF_IRQ_FECENTC0 (MCFINT_VECBASE + MCFINT_FECENTC0)
#define MCF_IRQ_QSPI (MCFINT_VECBASE + MCFINT_QSPI)
/* /*
* SDRAM configuration registers. * SDRAM configuration registers.
*/ */
...@@ -58,15 +73,26 @@ ...@@ -58,15 +73,26 @@
/* /*
* UART module. * UART module.
*/ */
#define MCFUART_BASE1 (MCF_IPSBAR + 0x00000200) #define MCFUART_BASE0 (MCF_IPSBAR + 0x00000200)
#define MCFUART_BASE2 (MCF_IPSBAR + 0x00000240) #define MCFUART_BASE1 (MCF_IPSBAR + 0x00000240)
#define MCFUART_BASE3 (MCF_IPSBAR + 0x00000280) #define MCFUART_BASE2 (MCF_IPSBAR + 0x00000280)
/* /*
* FEC ethernet module. * FEC ethernet module.
*/ */
#define MCFFEC_BASE (MCF_IPSBAR + 0x00001000) #define MCFFEC_BASE0 (MCF_IPSBAR + 0x00001000)
#define MCFFEC_SIZE 0x800 #define MCFFEC_SIZE0 0x800
/*
* QSPI module.
*/
#define MCFQSPI_IOBASE (MCF_IPSBAR + 0x340)
#define MCFQSPI_SIZE 0x40
#define MCFQSPI_CS0 147
#define MCFQSPI_CS1 148
#define MCFQSPI_CS2 149
#define MCFQSPI_CS3 150
/* /*
* GPIO registers * GPIO registers
...@@ -246,8 +272,8 @@ ...@@ -246,8 +272,8 @@
/* /*
* Reset Control Unit (relative to IPSBAR). * Reset Control Unit (relative to IPSBAR).
*/ */
#define MCF_RCR 0x110000 #define MCF_RCR (MCF_IPSBAR + 0x110000)
#define MCF_RSR 0x110001 #define MCF_RSR (MCF_IPSBAR + 0x110001)
#define MCF_RCR_SWRESET 0x80 /* Software reset bit */ #define MCF_RCR_SWRESET 0x80 /* Software reset bit */
#define MCF_RCR_FRCSTOUT 0x40 /* Force external reset */ #define MCF_RCR_FRCSTOUT 0x40 /* Force external reset */
......
...@@ -117,11 +117,11 @@ ...@@ -117,11 +117,11 @@
* UART module. * UART module.
*/ */
#if defined(CONFIG_NETtel) || defined(CONFIG_SECUREEDGEMP3) #if defined(CONFIG_NETtel) || defined(CONFIG_SECUREEDGEMP3)
#define MCFUART_BASE1 0x200 /* Base address of UART1 */ #define MCFUART_BASE0 (MCF_MBAR + 0x200) /* Base address UART0 */
#define MCFUART_BASE2 0x1c0 /* Base address of UART2 */ #define MCFUART_BASE1 (MCF_MBAR + 0x1c0) /* Base address UART1 */
#else #else
#define MCFUART_BASE1 0x1c0 /* Base address of UART1 */ #define MCFUART_BASE0 (MCF_MBAR + 0x1c0) /* Base address UART0 */
#define MCFUART_BASE2 0x200 /* Base address of UART2 */ #define MCFUART_BASE1 (MCF_MBAR + 0x200) /* Base address UART1 */
#endif #endif
/* /*
...@@ -176,6 +176,8 @@ ...@@ -176,6 +176,8 @@
*/ */
#define MCF_IRQ_TIMER 30 /* Timer0, Level 6 */ #define MCF_IRQ_TIMER 30 /* Timer0, Level 6 */
#define MCF_IRQ_PROFILER 31 /* Timer1, Level 7 */ #define MCF_IRQ_PROFILER 31 /* Timer1, Level 7 */
#define MCF_IRQ_UART0 73 /* UART0 */
#define MCF_IRQ_UART1 74 /* UART1 */
/****************************************************************************/ /****************************************************************************/
#endif /* m5307sim_h */ #endif /* m5307sim_h */
...@@ -24,6 +24,19 @@ ...@@ -24,6 +24,19 @@
#define MCFINT_UART1 27 /* Interrupt number for UART1 */ #define MCFINT_UART1 27 /* Interrupt number for UART1 */
#define MCFINT_UART2 28 /* Interrupt number for UART2 */ #define MCFINT_UART2 28 /* Interrupt number for UART2 */
#define MCFINT_QSPI 31 /* Interrupt number for QSPI */ #define MCFINT_QSPI 31 /* Interrupt number for QSPI */
#define MCFINT_FECRX0 36 /* Interrupt number for FEC */
#define MCFINT_FECTX0 40 /* Interrupt number for FEC */
#define MCFINT_FECENTC0 42 /* Interrupt number for FEC */
#define MCF_IRQ_UART0 (MCFINT_VECBASE + MCFINT_UART0)
#define MCF_IRQ_UART1 (MCFINT_VECBASE + MCFINT_UART1)
#define MCF_IRQ_UART2 (MCFINT_VECBASE + MCFINT_UART2)
#define MCF_IRQ_FECRX0 (MCFINT_VECBASE + MCFINT_FECRX0)
#define MCF_IRQ_FECTX0 (MCFINT_VECBASE + MCFINT_FECTX0)
#define MCF_IRQ_FECENTC0 (MCFINT_VECBASE + MCFINT_FECENTC0)
#define MCF_IRQ_QSPI (MCFINT_VECBASE + MCFINT_QSPI)
#define MCF_WTM_WCR MCF_REG16(0xFC098000) #define MCF_WTM_WCR MCF_REG16(0xFC098000)
...@@ -82,9 +95,25 @@ ...@@ -82,9 +95,25 @@
/* /*
* UART module. * UART module.
*/ */
#define MCFUART_BASE1 0xFC060000 /* Base address of UART1 */ #define MCFUART_BASE0 0xFC060000 /* Base address of UART1 */
#define MCFUART_BASE2 0xFC064000 /* Base address of UART2 */ #define MCFUART_BASE1 0xFC064000 /* Base address of UART2 */
#define MCFUART_BASE3 0xFC068000 /* Base address of UART3 */ #define MCFUART_BASE2 0xFC068000 /* Base address of UART3 */
/*
* FEC module.
*/
#define MCFFEC_BASE0 0xFC030000 /* Base address of FEC0 */
#define MCFFEC_SIZE0 0x800 /* Size of FEC0 region */
/*
* QSPI module.
*/
#define MCFQSPI_BASE 0xFC058000 /* Base address of QSPI */
#define MCFQSPI_SIZE 0x40 /* Size of QSPI region */
#define MCFQSPI_CS0 84
#define MCFQSPI_CS1 85
#define MCFQSPI_CS2 86
/* /*
* Timer module. * Timer module.
......
...@@ -85,8 +85,8 @@ ...@@ -85,8 +85,8 @@
#define MCFTIMER_BASE1 (MCF_MBAR + 0x140) /* Base of TIMER1 */ #define MCFTIMER_BASE1 (MCF_MBAR + 0x140) /* Base of TIMER1 */
#define MCFTIMER_BASE2 (MCF_MBAR + 0x180) /* Base of TIMER2 */ #define MCFTIMER_BASE2 (MCF_MBAR + 0x180) /* Base of TIMER2 */
#define MCFUART_BASE1 0x1c0 /* Base address of UART1 */ #define MCFUART_BASE0 (MCF_MBAR + 0x1c0) /* Base address UART0 */
#define MCFUART_BASE2 0x200 /* Base address of UART2 */ #define MCFUART_BASE1 (MCF_MBAR + 0x200) /* Base address UART1 */
#define MCFSIM_PADDR (MCF_MBAR + 0x244) #define MCFSIM_PADDR (MCF_MBAR + 0x244)
#define MCFSIM_PADAT (MCF_MBAR + 0x248) #define MCFSIM_PADAT (MCF_MBAR + 0x248)
...@@ -139,6 +139,8 @@ ...@@ -139,6 +139,8 @@
*/ */
#define MCF_IRQ_TIMER 30 /* Timer0, Level 6 */ #define MCF_IRQ_TIMER 30 /* Timer0, Level 6 */
#define MCF_IRQ_PROFILER 31 /* Timer1, Level 7 */ #define MCF_IRQ_PROFILER 31 /* Timer1, Level 7 */
#define MCF_IRQ_UART0 73 /* UART0 */
#define MCF_IRQ_UART1 74 /* UART1 */
/****************************************************************************/ /****************************************************************************/
#endif /* m5407sim_h */ #endif /* m5407sim_h */
...@@ -31,16 +31,20 @@ ...@@ -31,16 +31,20 @@
/* /*
* UART module. * UART module.
*/ */
#define MCFUART_BASE1 0x8600 /* Base address of UART1 */ #define MCFUART_BASE0 (MCF_MBAR + 0x8600) /* Base address UART0 */
#define MCFUART_BASE2 0x8700 /* Base address of UART2 */ #define MCFUART_BASE1 (MCF_MBAR + 0x8700) /* Base address UART1 */
#define MCFUART_BASE3 0x8800 /* Base address of UART3 */ #define MCFUART_BASE2 (MCF_MBAR + 0x8800) /* Base address UART2 */
#define MCFUART_BASE4 0x8900 /* Base address of UART4 */ #define MCFUART_BASE3 (MCF_MBAR + 0x8900) /* Base address UART3 */
/* /*
* Define system peripheral IRQ usage. * Define system peripheral IRQ usage.
*/ */
#define MCF_IRQ_TIMER (64 + 54) /* Slice Timer 0 */ #define MCF_IRQ_TIMER (MCFINT_VECBASE + 54) /* Slice Timer 0 */
#define MCF_IRQ_PROFILER (64 + 53) /* Slice Timer 1 */ #define MCF_IRQ_PROFILER (MCFINT_VECBASE + 53) /* Slice Timer 1 */
#define MCF_IRQ_UART0 (MCFINT_VECBASE + 35)
#define MCF_IRQ_UART1 (MCFINT_VECBASE + 34)
#define MCF_IRQ_UART2 (MCFINT_VECBASE + 33)
#define MCF_IRQ_UART3 (MCFINT_VECBASE + 32)
/* /*
* Generic GPIO support * Generic GPIO support
......
...@@ -22,8 +22,6 @@ extern unsigned int (*mach_get_ss)(void); ...@@ -22,8 +22,6 @@ extern unsigned int (*mach_get_ss)(void);
extern int (*mach_get_rtc_pll)(struct rtc_pll_info *); extern int (*mach_get_rtc_pll)(struct rtc_pll_info *);
extern int (*mach_set_rtc_pll)(struct rtc_pll_info *); extern int (*mach_set_rtc_pll)(struct rtc_pll_info *);
extern int (*mach_set_clock_mmss)(unsigned long); extern int (*mach_set_clock_mmss)(unsigned long);
extern void (*mach_gettod)(int *year, int *mon, int *day, int *hour,
int *min, int *sec);
extern void (*mach_reset)( void ); extern void (*mach_reset)( void );
extern void (*mach_halt)( void ); extern void (*mach_halt)( void );
extern void (*mach_power_off)( void ); extern void (*mach_power_off)( void );
...@@ -35,9 +33,8 @@ extern void (*mach_l2_flush) (int); ...@@ -35,9 +33,8 @@ extern void (*mach_l2_flush) (int);
extern void (*mach_beep) (unsigned int, unsigned int); extern void (*mach_beep) (unsigned int, unsigned int);
/* Hardware clock functions */ /* Hardware clock functions */
extern void hw_timer_init(void); extern void hw_timer_init(irq_handler_t handler);
extern unsigned long hw_timer_offset(void); extern unsigned long hw_timer_offset(void);
extern irqreturn_t arch_timer_interrupt(int irq, void *dummy);
extern void config_BSP(char *command, int len); extern void config_BSP(char *command, int len);
......
...@@ -21,17 +21,6 @@ ...@@ -21,17 +21,6 @@
#ifndef mcfqspi_h #ifndef mcfqspi_h
#define mcfqspi_h #define mcfqspi_h
#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x)
#define MCFQSPI_IOBASE (MCF_IPSBAR + 0x340)
#elif defined(CONFIG_M5249)
#define MCFQSPI_IOBASE (MCF_MBAR + 0x300)
#elif defined(CONFIG_M520x)
#define MCFQSPI_IOBASE 0xFC05C000
#elif defined(CONFIG_M532x)
#define MCFQSPI_IOBASE 0xFC058000
#endif
#define MCFQSPI_IOSIZE 0x40
/** /**
* struct mcfqspi_cs_control - chip select control for the coldfire qspi driver * struct mcfqspi_cs_control - chip select control for the coldfire qspi driver
* @setup: setup the control; allocate gpio's, etc. May be NULL. * @setup: setup the control; allocate gpio's, etc. May be NULL.
......
...@@ -41,7 +41,10 @@ struct mcf_platform_uart { ...@@ -41,7 +41,10 @@ struct mcf_platform_uart {
#define MCFUART_UTF 0x28 /* Transmitter FIFO (r/w) */ #define MCFUART_UTF 0x28 /* Transmitter FIFO (r/w) */
#define MCFUART_URF 0x2c /* Receiver FIFO (r/w) */ #define MCFUART_URF 0x2c /* Receiver FIFO (r/w) */
#define MCFUART_UFPD 0x30 /* Frac Prec. Divider (r/w) */ #define MCFUART_UFPD 0x30 /* Frac Prec. Divider (r/w) */
#else #endif
#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \
defined(CONFIG_M5249) || defined(CONFIG_M5307) || \
defined(CONFIG_M5407)
#define MCFUART_UIVR 0x30 /* Interrupt Vector (r/w) */ #define MCFUART_UIVR 0x30 /* Interrupt Vector (r/w) */
#endif #endif
#define MCFUART_UIPR 0x34 /* Input Port (r) */ #define MCFUART_UIPR 0x34 /* Input Port (r) */
......
/*
* linux/arch/m68k/kernel/process.c
*
* Copyright (C) 1995 Hamish Macdonald
*
* 68060 fixes by Jesper Skov
*/
/*
* This file handles the architecture-dependent parts of process handling..
*/
#include <linux/errno.h>
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/slab.h>
#include <linux/fs.h>
#include <linux/smp.h>
#include <linux/stddef.h>
#include <linux/unistd.h>
#include <linux/ptrace.h>
#include <linux/user.h>
#include <linux/reboot.h>
#include <linux/init_task.h>
#include <linux/mqueue.h>
#include <asm/uaccess.h>
#include <asm/system.h>
#include <asm/traps.h>
#include <asm/machdep.h>
#include <asm/setup.h>
#include <asm/pgtable.h>
asmlinkage void ret_from_fork(void);
/*
* Return saved PC from a blocked thread
*/
unsigned long thread_saved_pc(struct task_struct *tsk)
{
struct switch_stack *sw = (struct switch_stack *)tsk->thread.ksp;
/* Check whether the thread is blocked in resume() */
if (in_sched_functions(sw->retpc))
return ((unsigned long *)sw->a6)[1];
else
return sw->retpc;
}
/*
* The idle loop on an m68k..
*/
static void default_idle(void)
{
if (!need_resched())
#if defined(MACH_ATARI_ONLY)
/* block out HSYNC on the atari (falcon) */
__asm__("stop #0x2200" : : : "cc");
#else
__asm__("stop #0x2000" : : : "cc");
#endif
}
void (*idle)(void) = default_idle;
/*
* The idle thread. There's no useful work to be
* done, so just try to conserve power and have a
* low exit latency (ie sit in a loop waiting for
* somebody to say that they'd like to reschedule)
*/
void cpu_idle(void)
{
/* endless idle loop with no priority at all */
while (1) {
while (!need_resched())
idle();
schedule_preempt_disabled();
}
}
void machine_restart(char * __unused)
{
if (mach_reset)
mach_reset();
for (;;);
}
void machine_halt(void)
{
if (mach_halt)
mach_halt();
for (;;);
}
void machine_power_off(void)
{
if (mach_power_off)
mach_power_off();
for (;;);
}
void (*pm_power_off)(void) = machine_power_off;
EXPORT_SYMBOL(pm_power_off);
void show_regs(struct pt_regs * regs)
{
printk("\n");
printk("Format %02x Vector: %04x PC: %08lx Status: %04x %s\n",
regs->format, regs->vector, regs->pc, regs->sr, print_tainted());
printk("ORIG_D0: %08lx D0: %08lx A2: %08lx A1: %08lx\n",
regs->orig_d0, regs->d0, regs->a2, regs->a1);
printk("A0: %08lx D5: %08lx D4: %08lx\n",
regs->a0, regs->d5, regs->d4);
printk("D3: %08lx D2: %08lx D1: %08lx\n",
regs->d3, regs->d2, regs->d1);
if (!(regs->sr & PS_S))
printk("USP: %08lx\n", rdusp());
}
/*
* Create a kernel thread
*/
int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags)
{
int pid;
mm_segment_t fs;
fs = get_fs();
set_fs (KERNEL_DS);
{
register long retval __asm__ ("d0");
register long clone_arg __asm__ ("d1") = flags | CLONE_VM | CLONE_UNTRACED;
retval = __NR_clone;
__asm__ __volatile__
("clrl %%d2\n\t"
"trap #0\n\t" /* Linux/m68k system call */
"tstl %0\n\t" /* child or parent */
"jne 1f\n\t" /* parent - jump */
#ifdef CONFIG_MMU
"lea %%sp@(%c7),%6\n\t" /* reload current */
"movel %6@,%6\n\t"
#endif
"movel %3,%%sp@-\n\t" /* push argument */
"jsr %4@\n\t" /* call fn */
"movel %0,%%d1\n\t" /* pass exit value */
"movel %2,%%d0\n\t" /* exit */
"trap #0\n"
"1:"
: "+d" (retval)
: "i" (__NR_clone), "i" (__NR_exit),
"r" (arg), "a" (fn), "d" (clone_arg), "r" (current),
"i" (-THREAD_SIZE)
: "d2");
pid = retval;
}
set_fs (fs);
return pid;
}
EXPORT_SYMBOL(kernel_thread);
void flush_thread(void)
{
current->thread.fs = __USER_DS;
#ifdef CONFIG_FPU
if (!FPU_IS_EMU) {
unsigned long zero = 0;
asm volatile("frestore %0": :"m" (zero));
}
#endif
}
/*
* "m68k_fork()".. By the time we get here, the
* non-volatile registers have also been saved on the
* stack. We do some ugly pointer stuff here.. (see
* also copy_thread)
*/
asmlinkage int m68k_fork(struct pt_regs *regs)
{
#ifdef CONFIG_MMU #ifdef CONFIG_MMU
#include "process_mm.c" return do_fork(SIGCHLD, rdusp(), regs, 0, NULL, NULL);
#else #else
#include "process_no.c" return -EINVAL;
#endif #endif
}
asmlinkage int m68k_vfork(struct pt_regs *regs)
{
return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, rdusp(), regs, 0,
NULL, NULL);
}
asmlinkage int m68k_clone(struct pt_regs *regs)
{
unsigned long clone_flags;
unsigned long newsp;
int __user *parent_tidptr, *child_tidptr;
/* syscall2 puts clone_flags in d1 and usp in d2 */
clone_flags = regs->d1;
newsp = regs->d2;
parent_tidptr = (int __user *)regs->d3;
child_tidptr = (int __user *)regs->d4;
if (!newsp)
newsp = rdusp();
return do_fork(clone_flags, newsp, regs, 0,
parent_tidptr, child_tidptr);
}
int copy_thread(unsigned long clone_flags, unsigned long usp,
unsigned long unused,
struct task_struct * p, struct pt_regs * regs)
{
struct pt_regs * childregs;
struct switch_stack * childstack, *stack;
unsigned long *retp;
childregs = (struct pt_regs *) (task_stack_page(p) + THREAD_SIZE) - 1;
*childregs = *regs;
childregs->d0 = 0;
retp = ((unsigned long *) regs);
stack = ((struct switch_stack *) retp) - 1;
childstack = ((struct switch_stack *) childregs) - 1;
*childstack = *stack;
childstack->retpc = (unsigned long)ret_from_fork;
p->thread.usp = usp;
p->thread.ksp = (unsigned long)childstack;
if (clone_flags & CLONE_SETTLS)
task_thread_info(p)->tp_value = regs->d5;
/*
* Must save the current SFC/DFC value, NOT the value when
* the parent was last descheduled - RGH 10-08-96
*/
p->thread.fs = get_fs().seg;
#ifdef CONFIG_FPU
if (!FPU_IS_EMU) {
/* Copy the current fpu state */
asm volatile ("fsave %0" : : "m" (p->thread.fpstate[0]) : "memory");
if (!CPU_IS_060 ? p->thread.fpstate[0] : p->thread.fpstate[2]) {
if (CPU_IS_COLDFIRE) {
asm volatile ("fmovemd %/fp0-%/fp7,%0\n\t"
"fmovel %/fpiar,%1\n\t"
"fmovel %/fpcr,%2\n\t"
"fmovel %/fpsr,%3"
:
: "m" (p->thread.fp[0]),
"m" (p->thread.fpcntl[0]),
"m" (p->thread.fpcntl[1]),
"m" (p->thread.fpcntl[2])
: "memory");
} else {
asm volatile ("fmovemx %/fp0-%/fp7,%0\n\t"
"fmoveml %/fpiar/%/fpcr/%/fpsr,%1"
:
: "m" (p->thread.fp[0]),
"m" (p->thread.fpcntl[0])
: "memory");
}
}
/* Restore the state in case the fpu was busy */
asm volatile ("frestore %0" : : "m" (p->thread.fpstate[0]));
}
#endif /* CONFIG_FPU */
return 0;
}
/* Fill in the fpu structure for a core dump. */
#ifdef CONFIG_FPU
int dump_fpu (struct pt_regs *regs, struct user_m68kfp_struct *fpu)
{
char fpustate[216];
if (FPU_IS_EMU) {
int i;
memcpy(fpu->fpcntl, current->thread.fpcntl, 12);
memcpy(fpu->fpregs, current->thread.fp, 96);
/* Convert internal fpu reg representation
* into long double format
*/
for (i = 0; i < 24; i += 3)
fpu->fpregs[i] = ((fpu->fpregs[i] & 0xffff0000) << 15) |
((fpu->fpregs[i] & 0x0000ffff) << 16);
return 1;
}
/* First dump the fpu context to avoid protocol violation. */
asm volatile ("fsave %0" :: "m" (fpustate[0]) : "memory");
if (!CPU_IS_060 ? !fpustate[0] : !fpustate[2])
return 0;
if (CPU_IS_COLDFIRE) {
asm volatile ("fmovel %/fpiar,%0\n\t"
"fmovel %/fpcr,%1\n\t"
"fmovel %/fpsr,%2\n\t"
"fmovemd %/fp0-%/fp7,%3"
:
: "m" (fpu->fpcntl[0]),
"m" (fpu->fpcntl[1]),
"m" (fpu->fpcntl[2]),
"m" (fpu->fpregs[0])
: "memory");
} else {
asm volatile ("fmovem %/fpiar/%/fpcr/%/fpsr,%0"
:
: "m" (fpu->fpcntl[0])
: "memory");
asm volatile ("fmovemx %/fp0-%/fp7,%0"
:
: "m" (fpu->fpregs[0])
: "memory");
}
return 1;
}
EXPORT_SYMBOL(dump_fpu);
#endif /* CONFIG_FPU */
/*
* sys_execve() executes a new program.
*/
asmlinkage int sys_execve(const char __user *name,
const char __user *const __user *argv,
const char __user *const __user *envp)
{
int error;
char * filename;
struct pt_regs *regs = (struct pt_regs *) &name;
filename = getname(name);
error = PTR_ERR(filename);
if (IS_ERR(filename))
return error;
error = do_execve(filename, argv, envp, regs);
putname(filename);
return error;
}
unsigned long get_wchan(struct task_struct *p)
{
unsigned long fp, pc;
unsigned long stack_page;
int count = 0;
if (!p || p == current || p->state == TASK_RUNNING)
return 0;
stack_page = (unsigned long)task_stack_page(p);
fp = ((struct switch_stack *)p->thread.ksp)->a6;
do {
if (fp < stack_page+sizeof(struct thread_info) ||
fp >= 8184+stack_page)
return 0;
pc = ((unsigned long *)fp)[1];
if (!in_sched_functions(pc))
return pc;
fp = *(unsigned long *) fp;
} while (count++ < 16);
return 0;
}
/*
* linux/arch/m68k/kernel/process.c
*
* Copyright (C) 1995 Hamish Macdonald
*
* 68060 fixes by Jesper Skov
*/
/*
* This file handles the architecture-dependent parts of process handling..
*/
#include <linux/errno.h>
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/slab.h>
#include <linux/fs.h>
#include <linux/smp.h>
#include <linux/stddef.h>
#include <linux/unistd.h>
#include <linux/ptrace.h>
#include <linux/user.h>
#include <linux/reboot.h>
#include <linux/init_task.h>
#include <linux/mqueue.h>
#include <asm/uaccess.h>
#include <asm/system.h>
#include <asm/traps.h>
#include <asm/machdep.h>
#include <asm/setup.h>
#include <asm/pgtable.h>
asmlinkage void ret_from_fork(void);
/*
* Return saved PC from a blocked thread
*/
unsigned long thread_saved_pc(struct task_struct *tsk)
{
struct switch_stack *sw = (struct switch_stack *)tsk->thread.ksp;
/* Check whether the thread is blocked in resume() */
if (in_sched_functions(sw->retpc))
return ((unsigned long *)sw->a6)[1];
else
return sw->retpc;
}
/*
* The idle loop on an m68k..
*/
static void default_idle(void)
{
if (!need_resched())
#if defined(MACH_ATARI_ONLY)
/* block out HSYNC on the atari (falcon) */
__asm__("stop #0x2200" : : : "cc");
#else
__asm__("stop #0x2000" : : : "cc");
#endif
}
void (*idle)(void) = default_idle;
/*
* The idle thread. There's no useful work to be
* done, so just try to conserve power and have a
* low exit latency (ie sit in a loop waiting for
* somebody to say that they'd like to reschedule)
*/
void cpu_idle(void)
{
/* endless idle loop with no priority at all */
while (1) {
while (!need_resched())
idle();
schedule_preempt_disabled();
}
}
void machine_restart(char * __unused)
{
if (mach_reset)
mach_reset();
for (;;);
}
void machine_halt(void)
{
if (mach_halt)
mach_halt();
for (;;);
}
void machine_power_off(void)
{
if (mach_power_off)
mach_power_off();
for (;;);
}
void (*pm_power_off)(void) = machine_power_off;
EXPORT_SYMBOL(pm_power_off);
void show_regs(struct pt_regs * regs)
{
printk("\n");
printk("Format %02x Vector: %04x PC: %08lx Status: %04x %s\n",
regs->format, regs->vector, regs->pc, regs->sr, print_tainted());
printk("ORIG_D0: %08lx D0: %08lx A2: %08lx A1: %08lx\n",
regs->orig_d0, regs->d0, regs->a2, regs->a1);
printk("A0: %08lx D5: %08lx D4: %08lx\n",
regs->a0, regs->d5, regs->d4);
printk("D3: %08lx D2: %08lx D1: %08lx\n",
regs->d3, regs->d2, regs->d1);
if (!(regs->sr & PS_S))
printk("USP: %08lx\n", rdusp());
}
/*
* Create a kernel thread
*/
int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags)
{
int pid;
mm_segment_t fs;
fs = get_fs();
set_fs (KERNEL_DS);
{
register long retval __asm__ ("d0");
register long clone_arg __asm__ ("d1") = flags | CLONE_VM | CLONE_UNTRACED;
retval = __NR_clone;
__asm__ __volatile__
("clrl %%d2\n\t"
"trap #0\n\t" /* Linux/m68k system call */
"tstl %0\n\t" /* child or parent */
"jne 1f\n\t" /* parent - jump */
"lea %%sp@(%c7),%6\n\t" /* reload current */
"movel %6@,%6\n\t"
"movel %3,%%sp@-\n\t" /* push argument */
"jsr %4@\n\t" /* call fn */
"movel %0,%%d1\n\t" /* pass exit value */
"movel %2,%%d0\n\t" /* exit */
"trap #0\n"
"1:"
: "+d" (retval)
: "i" (__NR_clone), "i" (__NR_exit),
"r" (arg), "a" (fn), "d" (clone_arg), "r" (current),
"i" (-THREAD_SIZE)
: "d2");
pid = retval;
}
set_fs (fs);
return pid;
}
EXPORT_SYMBOL(kernel_thread);
void flush_thread(void)
{
unsigned long zero = 0;
current->thread.fs = __USER_DS;
if (!FPU_IS_EMU)
asm volatile("frestore %0": :"m" (zero));
}
/*
* "m68k_fork()".. By the time we get here, the
* non-volatile registers have also been saved on the
* stack. We do some ugly pointer stuff here.. (see
* also copy_thread)
*/
asmlinkage int m68k_fork(struct pt_regs *regs)
{
return do_fork(SIGCHLD, rdusp(), regs, 0, NULL, NULL);
}
asmlinkage int m68k_vfork(struct pt_regs *regs)
{
return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, rdusp(), regs, 0,
NULL, NULL);
}
asmlinkage int m68k_clone(struct pt_regs *regs)
{
unsigned long clone_flags;
unsigned long newsp;
int __user *parent_tidptr, *child_tidptr;
/* syscall2 puts clone_flags in d1 and usp in d2 */
clone_flags = regs->d1;
newsp = regs->d2;
parent_tidptr = (int __user *)regs->d3;
child_tidptr = (int __user *)regs->d4;
if (!newsp)
newsp = rdusp();
return do_fork(clone_flags, newsp, regs, 0,
parent_tidptr, child_tidptr);
}
int copy_thread(unsigned long clone_flags, unsigned long usp,
unsigned long unused,
struct task_struct * p, struct pt_regs * regs)
{
struct pt_regs * childregs;
struct switch_stack * childstack, *stack;
unsigned long *retp;
childregs = (struct pt_regs *) (task_stack_page(p) + THREAD_SIZE) - 1;
*childregs = *regs;
childregs->d0 = 0;
retp = ((unsigned long *) regs);
stack = ((struct switch_stack *) retp) - 1;
childstack = ((struct switch_stack *) childregs) - 1;
*childstack = *stack;
childstack->retpc = (unsigned long)ret_from_fork;
p->thread.usp = usp;
p->thread.ksp = (unsigned long)childstack;
if (clone_flags & CLONE_SETTLS)
task_thread_info(p)->tp_value = regs->d5;
/*
* Must save the current SFC/DFC value, NOT the value when
* the parent was last descheduled - RGH 10-08-96
*/
p->thread.fs = get_fs().seg;
if (!FPU_IS_EMU) {
/* Copy the current fpu state */
asm volatile ("fsave %0" : : "m" (p->thread.fpstate[0]) : "memory");
if (!CPU_IS_060 ? p->thread.fpstate[0] : p->thread.fpstate[2]) {
if (CPU_IS_COLDFIRE) {
asm volatile ("fmovemd %/fp0-%/fp7,%0\n\t"
"fmovel %/fpiar,%1\n\t"
"fmovel %/fpcr,%2\n\t"
"fmovel %/fpsr,%3"
:
: "m" (p->thread.fp[0]),
"m" (p->thread.fpcntl[0]),
"m" (p->thread.fpcntl[1]),
"m" (p->thread.fpcntl[2])
: "memory");
} else {
asm volatile ("fmovemx %/fp0-%/fp7,%0\n\t"
"fmoveml %/fpiar/%/fpcr/%/fpsr,%1"
:
: "m" (p->thread.fp[0]),
"m" (p->thread.fpcntl[0])
: "memory");
}
}
/* Restore the state in case the fpu was busy */
asm volatile ("frestore %0" : : "m" (p->thread.fpstate[0]));
}
return 0;
}
/* Fill in the fpu structure for a core dump. */
int dump_fpu (struct pt_regs *regs, struct user_m68kfp_struct *fpu)
{
char fpustate[216];
if (FPU_IS_EMU) {
int i;
memcpy(fpu->fpcntl, current->thread.fpcntl, 12);
memcpy(fpu->fpregs, current->thread.fp, 96);
/* Convert internal fpu reg representation
* into long double format
*/
for (i = 0; i < 24; i += 3)
fpu->fpregs[i] = ((fpu->fpregs[i] & 0xffff0000) << 15) |
((fpu->fpregs[i] & 0x0000ffff) << 16);
return 1;
}
/* First dump the fpu context to avoid protocol violation. */
asm volatile ("fsave %0" :: "m" (fpustate[0]) : "memory");
if (!CPU_IS_060 ? !fpustate[0] : !fpustate[2])
return 0;
if (CPU_IS_COLDFIRE) {
asm volatile ("fmovel %/fpiar,%0\n\t"
"fmovel %/fpcr,%1\n\t"
"fmovel %/fpsr,%2\n\t"
"fmovemd %/fp0-%/fp7,%3"
:
: "m" (fpu->fpcntl[0]),
"m" (fpu->fpcntl[1]),
"m" (fpu->fpcntl[2]),
"m" (fpu->fpregs[0])
: "memory");
} else {
asm volatile ("fmovem %/fpiar/%/fpcr/%/fpsr,%0"
:
: "m" (fpu->fpcntl[0])
: "memory");
asm volatile ("fmovemx %/fp0-%/fp7,%0"
:
: "m" (fpu->fpregs[0])
: "memory");
}
return 1;
}
EXPORT_SYMBOL(dump_fpu);
/*
* sys_execve() executes a new program.
*/
asmlinkage int sys_execve(const char __user *name,
const char __user *const __user *argv,
const char __user *const __user *envp)
{
int error;
char * filename;
struct pt_regs *regs = (struct pt_regs *) &name;
filename = getname(name);
error = PTR_ERR(filename);
if (IS_ERR(filename))
return error;
error = do_execve(filename, argv, envp, regs);
putname(filename);
return error;
}
unsigned long get_wchan(struct task_struct *p)
{
unsigned long fp, pc;
unsigned long stack_page;
int count = 0;
if (!p || p == current || p->state == TASK_RUNNING)
return 0;
stack_page = (unsigned long)task_stack_page(p);
fp = ((struct switch_stack *)p->thread.ksp)->a6;
do {
if (fp < stack_page+sizeof(struct thread_info) ||
fp >= 8184+stack_page)
return 0;
pc = ((unsigned long *)fp)[1];
if (!in_sched_functions(pc))
return pc;
fp = *(unsigned long *) fp;
} while (count++ < 16);
return 0;
}
/*
* linux/arch/m68knommu/kernel/process.c
*
* Copyright (C) 1995 Hamish Macdonald
*
* 68060 fixes by Jesper Skov
*
* uClinux changes
* Copyright (C) 2000-2002, David McCullough <davidm@snapgear.com>
*/
/*
* This file handles the architecture-dependent parts of process handling..
*/
#include <linux/module.h>
#include <linux/errno.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/smp.h>
#include <linux/stddef.h>
#include <linux/unistd.h>
#include <linux/ptrace.h>
#include <linux/user.h>
#include <linux/interrupt.h>
#include <linux/reboot.h>
#include <linux/fs.h>
#include <linux/slab.h>
#include <asm/uaccess.h>
#include <asm/system.h>
#include <asm/traps.h>
#include <asm/machdep.h>
#include <asm/setup.h>
#include <asm/pgtable.h>
asmlinkage void ret_from_fork(void);
/*
* The following aren't currently used.
*/
void (*pm_idle)(void);
EXPORT_SYMBOL(pm_idle);
void (*pm_power_off)(void);
EXPORT_SYMBOL(pm_power_off);
/*
* The idle loop on an m68knommu..
*/
static void default_idle(void)
{
local_irq_disable();
while (!need_resched()) {
/* This stop will re-enable interrupts */
__asm__("stop #0x2000" : : : "cc");
local_irq_disable();
}
local_irq_enable();
}
void (*idle)(void) = default_idle;
/*
* The idle thread. There's no useful work to be
* done, so just try to conserve power and have a
* low exit latency (ie sit in a loop waiting for
* somebody to say that they'd like to reschedule)
*/
void cpu_idle(void)
{
/* endless idle loop with no priority at all */
while (1) {
idle();
schedule_preempt_disabled();
}
}
void machine_restart(char * __unused)
{
if (mach_reset)
mach_reset();
for (;;);
}
void machine_halt(void)
{
if (mach_halt)
mach_halt();
for (;;);
}
void machine_power_off(void)
{
if (mach_power_off)
mach_power_off();
for (;;);
}
void show_regs(struct pt_regs * regs)
{
printk(KERN_NOTICE "\n");
printk(KERN_NOTICE "Format %02x Vector: %04x PC: %08lx Status: %04x %s\n",
regs->format, regs->vector, regs->pc, regs->sr, print_tainted());
printk(KERN_NOTICE "ORIG_D0: %08lx D0: %08lx A2: %08lx A1: %08lx\n",
regs->orig_d0, regs->d0, regs->a2, regs->a1);
printk(KERN_NOTICE "A0: %08lx D5: %08lx D4: %08lx\n",
regs->a0, regs->d5, regs->d4);
printk(KERN_NOTICE "D3: %08lx D2: %08lx D1: %08lx\n",
regs->d3, regs->d2, regs->d1);
if (!(regs->sr & PS_S))
printk(KERN_NOTICE "USP: %08lx\n", rdusp());
}
/*
* Create a kernel thread
*/
int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags)
{
int retval;
long clone_arg = flags | CLONE_VM;
mm_segment_t fs;
fs = get_fs();
set_fs(KERNEL_DS);
__asm__ __volatile__ (
"movel %%sp, %%d2\n\t"
"movel %5, %%d1\n\t"
"movel %1, %%d0\n\t"
"trap #0\n\t"
"cmpl %%sp, %%d2\n\t"
"jeq 1f\n\t"
"movel %3, %%sp@-\n\t"
"jsr %4@\n\t"
"movel %2, %%d0\n\t"
"trap #0\n"
"1:\n\t"
"movel %%d0, %0\n"
: "=d" (retval)
: "i" (__NR_clone),
"i" (__NR_exit),
"a" (arg),
"a" (fn),
"a" (clone_arg)
: "cc", "%d0", "%d1", "%d2");
set_fs(fs);
return retval;
}
EXPORT_SYMBOL(kernel_thread);
void flush_thread(void)
{
#ifdef CONFIG_FPU
unsigned long zero = 0;
#endif
current->thread.fs = __USER_DS;
#ifdef CONFIG_FPU
if (!FPU_IS_EMU)
asm volatile (".chip 68k/68881\n\t"
"frestore %0\n\t"
".chip 68k" : : "m" (zero));
#endif
}
/*
* "m68k_fork()".. By the time we get here, the
* non-volatile registers have also been saved on the
* stack. We do some ugly pointer stuff here.. (see
* also copy_thread)
*/
asmlinkage int m68k_fork(struct pt_regs *regs)
{
/* fork almost works, enough to trick you into looking elsewhere :-( */
return(-EINVAL);
}
asmlinkage int m68k_vfork(struct pt_regs *regs)
{
return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, rdusp(), regs, 0, NULL, NULL);
}
asmlinkage int m68k_clone(struct pt_regs *regs)
{
unsigned long clone_flags;
unsigned long newsp;
/* syscall2 puts clone_flags in d1 and usp in d2 */
clone_flags = regs->d1;
newsp = regs->d2;
if (!newsp)
newsp = rdusp();
return do_fork(clone_flags, newsp, regs, 0, NULL, NULL);
}
int copy_thread(unsigned long clone_flags,
unsigned long usp, unsigned long topstk,
struct task_struct * p, struct pt_regs * regs)
{
struct pt_regs * childregs;
struct switch_stack * childstack, *stack;
unsigned long *retp;
childregs = (struct pt_regs *) (task_stack_page(p) + THREAD_SIZE) - 1;
*childregs = *regs;
childregs->d0 = 0;
retp = ((unsigned long *) regs);
stack = ((struct switch_stack *) retp) - 1;
childstack = ((struct switch_stack *) childregs) - 1;
*childstack = *stack;
childstack->retpc = (unsigned long)ret_from_fork;
p->thread.usp = usp;
p->thread.ksp = (unsigned long)childstack;
if (clone_flags & CLONE_SETTLS)
task_thread_info(p)->tp_value = regs->d5;
/*
* Must save the current SFC/DFC value, NOT the value when
* the parent was last descheduled - RGH 10-08-96
*/
p->thread.fs = get_fs().seg;
#ifdef CONFIG_FPU
if (!FPU_IS_EMU) {
/* Copy the current fpu state */
asm volatile ("fsave %0" : : "m" (p->thread.fpstate[0]) : "memory");
if (p->thread.fpstate[0])
asm volatile ("fmovemx %/fp0-%/fp7,%0\n\t"
"fmoveml %/fpiar/%/fpcr/%/fpsr,%1"
: : "m" (p->thread.fp[0]), "m" (p->thread.fpcntl[0])
: "memory");
/* Restore the state in case the fpu was busy */
asm volatile ("frestore %0" : : "m" (p->thread.fpstate[0]));
}
#endif
return 0;
}
/* Fill in the fpu structure for a core dump. */
int dump_fpu(struct pt_regs *regs, struct user_m68kfp_struct *fpu)
{
#ifdef CONFIG_FPU
char fpustate[216];
if (FPU_IS_EMU) {
int i;
memcpy(fpu->fpcntl, current->thread.fpcntl, 12);
memcpy(fpu->fpregs, current->thread.fp, 96);
/* Convert internal fpu reg representation
* into long double format
*/
for (i = 0; i < 24; i += 3)
fpu->fpregs[i] = ((fpu->fpregs[i] & 0xffff0000) << 15) |
((fpu->fpregs[i] & 0x0000ffff) << 16);
return 1;
}
/* First dump the fpu context to avoid protocol violation. */
asm volatile ("fsave %0" :: "m" (fpustate[0]) : "memory");
if (!fpustate[0])
return 0;
asm volatile ("fmovem %/fpiar/%/fpcr/%/fpsr,%0"
:: "m" (fpu->fpcntl[0])
: "memory");
asm volatile ("fmovemx %/fp0-%/fp7,%0"
:: "m" (fpu->fpregs[0])
: "memory");
#endif
return 1;
}
EXPORT_SYMBOL(dump_fpu);
/*
* Generic dumping code. Used for panic and debug.
*/
void dump(struct pt_regs *fp)
{
unsigned long *sp;
unsigned char *tp;
int i;
printk(KERN_EMERG "\nCURRENT PROCESS:\n\n");
printk(KERN_EMERG "COMM=%s PID=%d\n", current->comm, current->pid);
if (current->mm) {
printk(KERN_EMERG "TEXT=%08x-%08x DATA=%08x-%08x BSS=%08x-%08x\n",
(int) current->mm->start_code,
(int) current->mm->end_code,
(int) current->mm->start_data,
(int) current->mm->end_data,
(int) current->mm->end_data,
(int) current->mm->brk);
printk(KERN_EMERG "USER-STACK=%08x KERNEL-STACK=%08x\n\n",
(int) current->mm->start_stack,
(int)(((unsigned long) current) + THREAD_SIZE));
}
printk(KERN_EMERG "PC: %08lx\n", fp->pc);
printk(KERN_EMERG "SR: %08lx SP: %08lx\n", (long) fp->sr, (long) fp);
printk(KERN_EMERG "d0: %08lx d1: %08lx d2: %08lx d3: %08lx\n",
fp->d0, fp->d1, fp->d2, fp->d3);
printk(KERN_EMERG "d4: %08lx d5: %08lx a0: %08lx a1: %08lx\n",
fp->d4, fp->d5, fp->a0, fp->a1);
printk(KERN_EMERG "\nUSP: %08x TRAPFRAME: %p\n",
(unsigned int) rdusp(), fp);
printk(KERN_EMERG "\nCODE:");
tp = ((unsigned char *) fp->pc) - 0x20;
for (sp = (unsigned long *) tp, i = 0; (i < 0x40); i += 4) {
if ((i % 0x10) == 0)
printk(KERN_EMERG "%p: ", tp + i);
printk("%08x ", (int) *sp++);
}
printk(KERN_EMERG "\n");
printk(KERN_EMERG "KERNEL STACK:");
tp = ((unsigned char *) fp) - 0x40;
for (sp = (unsigned long *) tp, i = 0; (i < 0xc0); i += 4) {
if ((i % 0x10) == 0)
printk(KERN_EMERG "%p: ", tp + i);
printk("%08x ", (int) *sp++);
}
printk(KERN_EMERG "\n");
printk(KERN_EMERG "USER STACK:");
tp = (unsigned char *) (rdusp() - 0x10);
for (sp = (unsigned long *) tp, i = 0; (i < 0x80); i += 4) {
if ((i % 0x10) == 0)
printk(KERN_EMERG "%p: ", tp + i);
printk("%08x ", (int) *sp++);
}
printk(KERN_EMERG "\n");
}
/*
* sys_execve() executes a new program.
*/
asmlinkage int sys_execve(const char *name,
const char *const *argv,
const char *const *envp)
{
int error;
char * filename;
struct pt_regs *regs = (struct pt_regs *) &name;
filename = getname(name);
error = PTR_ERR(filename);
if (IS_ERR(filename))
return error;
error = do_execve(filename, argv, envp, regs);
putname(filename);
return error;
}
unsigned long get_wchan(struct task_struct *p)
{
unsigned long fp, pc;
unsigned long stack_page;
int count = 0;
if (!p || p == current || p->state == TASK_RUNNING)
return 0;
stack_page = (unsigned long)p;
fp = ((struct switch_stack *)p->thread.ksp)->a6;
do {
if (fp < stack_page+sizeof(struct thread_info) ||
fp >= THREAD_SIZE-8+stack_page)
return 0;
pc = ((unsigned long *)fp)[1];
if (!in_sched_functions(pc))
return pc;
fp = *(unsigned long *) fp;
} while (count++ < 16);
return 0;
}
/*
* Return saved PC of a blocked thread.
*/
unsigned long thread_saved_pc(struct task_struct *tsk)
{
struct switch_stack *sw = (struct switch_stack *)tsk->thread.ksp;
/* Check whether the thread is blocked in resume() */
if (in_sched_functions(sw->retpc))
return ((unsigned long *)sw->a6)[1];
else
return sw->retpc;
}
/*
* linux/arch/m68k/kernel/ptrace.c
*
* Copyright (C) 1994 by Hamish Macdonald
* Taken from linux/kernel/ptrace.c and modified for M680x0.
* linux/kernel/ptrace.c is by Ross Biro 1/23/92, edited by Linus Torvalds
*
* This file is subject to the terms and conditions of the GNU General
* Public License. See the file COPYING in the main directory of
* this archive for more details.
*/
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/smp.h>
#include <linux/errno.h>
#include <linux/ptrace.h>
#include <linux/user.h>
#include <linux/signal.h>
#include <linux/tracehook.h>
#include <asm/uaccess.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/system.h>
#include <asm/processor.h>
/*
* does not yet catch signals sent when the child dies.
* in exit.c or in signal.c.
*/
/* determines which bits in the SR the user has access to. */
/* 1 = access 0 = no access */
#define SR_MASK 0x001f
/* sets the trace bits. */
#define TRACE_BITS 0xC000
#define T1_BIT 0x8000
#define T0_BIT 0x4000
/* Find the stack offset for a register, relative to thread.esp0. */
#define PT_REG(reg) ((long)&((struct pt_regs *)0)->reg)
#define SW_REG(reg) ((long)&((struct switch_stack *)0)->reg \
- sizeof(struct switch_stack))
/* Mapping from PT_xxx to the stack offset at which the register is
saved. Notice that usp has no stack-slot and needs to be treated
specially (see get_reg/put_reg below). */
static const int regoff[] = {
[0] = PT_REG(d1),
[1] = PT_REG(d2),
[2] = PT_REG(d3),
[3] = PT_REG(d4),
[4] = PT_REG(d5),
[5] = SW_REG(d6),
[6] = SW_REG(d7),
[7] = PT_REG(a0),
[8] = PT_REG(a1),
[9] = PT_REG(a2),
[10] = SW_REG(a3),
[11] = SW_REG(a4),
[12] = SW_REG(a5),
[13] = SW_REG(a6),
[14] = PT_REG(d0),
[15] = -1,
[16] = PT_REG(orig_d0),
[17] = PT_REG(sr),
[18] = PT_REG(pc),
};
/*
* Get contents of register REGNO in task TASK.
*/
static inline long get_reg(struct task_struct *task, int regno)
{
unsigned long *addr;
if (regno == PT_USP)
addr = &task->thread.usp;
else if (regno < ARRAY_SIZE(regoff))
addr = (unsigned long *)(task->thread.esp0 + regoff[regno]);
else
return 0;
/* Need to take stkadj into account. */
if (regno == PT_SR || regno == PT_PC) {
long stkadj = *(long *)(task->thread.esp0 + PT_REG(stkadj));
addr = (unsigned long *) ((unsigned long)addr + stkadj);
/* The sr is actually a 16 bit register. */
if (regno == PT_SR)
return *(unsigned short *)addr;
}
return *addr;
}
/*
* Write contents of register REGNO in task TASK.
*/
static inline int put_reg(struct task_struct *task, int regno,
unsigned long data)
{
unsigned long *addr;
if (regno == PT_USP)
addr = &task->thread.usp;
else if (regno < ARRAY_SIZE(regoff))
addr = (unsigned long *)(task->thread.esp0 + regoff[regno]);
else
return -1;
/* Need to take stkadj into account. */
if (regno == PT_SR || regno == PT_PC) {
long stkadj = *(long *)(task->thread.esp0 + PT_REG(stkadj));
addr = (unsigned long *) ((unsigned long)addr + stkadj);
/* The sr is actually a 16 bit register. */
if (regno == PT_SR) {
*(unsigned short *)addr = data;
return 0;
}
}
*addr = data;
return 0;
}
/*
* Make sure the single step bit is not set.
*/
static inline void singlestep_disable(struct task_struct *child)
{
unsigned long tmp = get_reg(child, PT_SR) & ~TRACE_BITS;
put_reg(child, PT_SR, tmp);
clear_tsk_thread_flag(child, TIF_DELAYED_TRACE);
}
/*
* Called by kernel/ptrace.c when detaching..
*/
void ptrace_disable(struct task_struct *child)
{
singlestep_disable(child);
}
void user_enable_single_step(struct task_struct *child)
{
unsigned long tmp = get_reg(child, PT_SR) & ~TRACE_BITS;
put_reg(child, PT_SR, tmp | T1_BIT);
set_tsk_thread_flag(child, TIF_DELAYED_TRACE);
}
#ifdef CONFIG_MMU #ifdef CONFIG_MMU
#include "ptrace_mm.c" void user_enable_block_step(struct task_struct *child)
#else {
#include "ptrace_no.c" unsigned long tmp = get_reg(child, PT_SR) & ~TRACE_BITS;
put_reg(child, PT_SR, tmp | T0_BIT);
}
#endif #endif
void user_disable_single_step(struct task_struct *child)
{
singlestep_disable(child);
}
long arch_ptrace(struct task_struct *child, long request,
unsigned long addr, unsigned long data)
{
unsigned long tmp;
int i, ret = 0;
int regno = addr >> 2; /* temporary hack. */
unsigned long __user *datap = (unsigned long __user *) data;
switch (request) {
/* read the word at location addr in the USER area. */
case PTRACE_PEEKUSR:
if (addr & 3)
goto out_eio;
if (regno >= 0 && regno < 19) {
tmp = get_reg(child, regno);
} else if (regno >= 21 && regno < 49) {
tmp = child->thread.fp[regno - 21];
/* Convert internal fpu reg representation
* into long double format
*/
if (FPU_IS_EMU && (regno < 45) && !(regno % 3))
tmp = ((tmp & 0xffff0000) << 15) |
((tmp & 0x0000ffff) << 16);
#ifndef CONFIG_MMU
} else if (regno == 49) {
tmp = child->mm->start_code;
} else if (regno == 50) {
tmp = child->mm->start_data;
} else if (regno == 51) {
tmp = child->mm->end_code;
#endif
} else
goto out_eio;
ret = put_user(tmp, datap);
break;
case PTRACE_POKEUSR:
/* write the word at location addr in the USER area */
if (addr & 3)
goto out_eio;
if (regno == PT_SR) {
data &= SR_MASK;
data |= get_reg(child, PT_SR) & ~SR_MASK;
}
if (regno >= 0 && regno < 19) {
if (put_reg(child, regno, data))
goto out_eio;
} else if (regno >= 21 && regno < 48) {
/* Convert long double format
* into internal fpu reg representation
*/
if (FPU_IS_EMU && (regno < 45) && !(regno % 3)) {
data <<= 15;
data = (data & 0xffff0000) |
((data & 0x0000ffff) >> 1);
}
child->thread.fp[regno - 21] = data;
} else
goto out_eio;
break;
case PTRACE_GETREGS: /* Get all gp regs from the child. */
for (i = 0; i < 19; i++) {
tmp = get_reg(child, i);
ret = put_user(tmp, datap);
if (ret)
break;
datap++;
}
break;
case PTRACE_SETREGS: /* Set all gp regs in the child. */
for (i = 0; i < 19; i++) {
ret = get_user(tmp, datap);
if (ret)
break;
if (i == PT_SR) {
tmp &= SR_MASK;
tmp |= get_reg(child, PT_SR) & ~SR_MASK;
}
put_reg(child, i, tmp);
datap++;
}
break;
case PTRACE_GETFPREGS: /* Get the child FPU state. */
if (copy_to_user(datap, &child->thread.fp,
sizeof(struct user_m68kfp_struct)))
ret = -EFAULT;
break;
case PTRACE_SETFPREGS: /* Set the child FPU state. */
if (copy_from_user(&child->thread.fp, datap,
sizeof(struct user_m68kfp_struct)))
ret = -EFAULT;
break;
case PTRACE_GET_THREAD_AREA:
ret = put_user(task_thread_info(child)->tp_value, datap);
break;
default:
ret = ptrace_request(child, request, addr, data);
break;
}
return ret;
out_eio:
return -EIO;
}
asmlinkage void syscall_trace(void)
{
ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
? 0x80 : 0));
/*
* this isn't the same as continuing with a signal, but it will do
* for normal use. strace only continues with a signal if the
* stopping signal is not SIGTRAP. -brl
*/
if (current->exit_code) {
send_sig(current->exit_code, current, 1);
current->exit_code = 0;
}
}
#ifdef CONFIG_COLDFIRE
asmlinkage int syscall_trace_enter(void)
{
int ret = 0;
if (test_thread_flag(TIF_SYSCALL_TRACE))
ret = tracehook_report_syscall_entry(task_pt_regs(current));
return ret;
}
asmlinkage void syscall_trace_leave(void)
{
if (test_thread_flag(TIF_SYSCALL_TRACE))
tracehook_report_syscall_exit(task_pt_regs(current), 0);
}
#endif /* CONFIG_COLDFIRE */
/*
* linux/arch/m68k/kernel/ptrace.c
*
* Copyright (C) 1994 by Hamish Macdonald
* Taken from linux/kernel/ptrace.c and modified for M680x0.
* linux/kernel/ptrace.c is by Ross Biro 1/23/92, edited by Linus Torvalds
*
* This file is subject to the terms and conditions of the GNU General
* Public License. See the file COPYING in the main directory of
* this archive for more details.
*/
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/smp.h>
#include <linux/errno.h>
#include <linux/ptrace.h>
#include <linux/user.h>
#include <linux/signal.h>
#include <linux/tracehook.h>
#include <asm/uaccess.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/system.h>
#include <asm/processor.h>
/*
* does not yet catch signals sent when the child dies.
* in exit.c or in signal.c.
*/
/* determines which bits in the SR the user has access to. */
/* 1 = access 0 = no access */
#define SR_MASK 0x001f
/* sets the trace bits. */
#define TRACE_BITS 0xC000
#define T1_BIT 0x8000
#define T0_BIT 0x4000
/* Find the stack offset for a register, relative to thread.esp0. */
#define PT_REG(reg) ((long)&((struct pt_regs *)0)->reg)
#define SW_REG(reg) ((long)&((struct switch_stack *)0)->reg \
- sizeof(struct switch_stack))
/* Mapping from PT_xxx to the stack offset at which the register is
saved. Notice that usp has no stack-slot and needs to be treated
specially (see get_reg/put_reg below). */
static const int regoff[] = {
[0] = PT_REG(d1),
[1] = PT_REG(d2),
[2] = PT_REG(d3),
[3] = PT_REG(d4),
[4] = PT_REG(d5),
[5] = SW_REG(d6),
[6] = SW_REG(d7),
[7] = PT_REG(a0),
[8] = PT_REG(a1),
[9] = PT_REG(a2),
[10] = SW_REG(a3),
[11] = SW_REG(a4),
[12] = SW_REG(a5),
[13] = SW_REG(a6),
[14] = PT_REG(d0),
[15] = -1,
[16] = PT_REG(orig_d0),
[17] = PT_REG(sr),
[18] = PT_REG(pc),
};
/*
* Get contents of register REGNO in task TASK.
*/
static inline long get_reg(struct task_struct *task, int regno)
{
unsigned long *addr;
if (regno == PT_USP)
addr = &task->thread.usp;
else if (regno < ARRAY_SIZE(regoff))
addr = (unsigned long *)(task->thread.esp0 + regoff[regno]);
else
return 0;
/* Need to take stkadj into account. */
if (regno == PT_SR || regno == PT_PC) {
long stkadj = *(long *)(task->thread.esp0 + PT_REG(stkadj));
addr = (unsigned long *) ((unsigned long)addr + stkadj);
/* The sr is actually a 16 bit register. */
if (regno == PT_SR)
return *(unsigned short *)addr;
}
return *addr;
}
/*
* Write contents of register REGNO in task TASK.
*/
static inline int put_reg(struct task_struct *task, int regno,
unsigned long data)
{
unsigned long *addr;
if (regno == PT_USP)
addr = &task->thread.usp;
else if (regno < ARRAY_SIZE(regoff))
addr = (unsigned long *)(task->thread.esp0 + regoff[regno]);
else
return -1;
/* Need to take stkadj into account. */
if (regno == PT_SR || regno == PT_PC) {
long stkadj = *(long *)(task->thread.esp0 + PT_REG(stkadj));
addr = (unsigned long *) ((unsigned long)addr + stkadj);
/* The sr is actually a 16 bit register. */
if (regno == PT_SR) {
*(unsigned short *)addr = data;
return 0;
}
}
*addr = data;
return 0;
}
/*
* Make sure the single step bit is not set.
*/
static inline void singlestep_disable(struct task_struct *child)
{
unsigned long tmp = get_reg(child, PT_SR) & ~TRACE_BITS;
put_reg(child, PT_SR, tmp);
clear_tsk_thread_flag(child, TIF_DELAYED_TRACE);
}
/*
* Called by kernel/ptrace.c when detaching..
*/
void ptrace_disable(struct task_struct *child)
{
singlestep_disable(child);
}
void user_enable_single_step(struct task_struct *child)
{
unsigned long tmp = get_reg(child, PT_SR) & ~TRACE_BITS;
put_reg(child, PT_SR, tmp | T1_BIT);
set_tsk_thread_flag(child, TIF_DELAYED_TRACE);
}
void user_enable_block_step(struct task_struct *child)
{
unsigned long tmp = get_reg(child, PT_SR) & ~TRACE_BITS;
put_reg(child, PT_SR, tmp | T0_BIT);
}
void user_disable_single_step(struct task_struct *child)
{
singlestep_disable(child);
}
long arch_ptrace(struct task_struct *child, long request,
unsigned long addr, unsigned long data)
{
unsigned long tmp;
int i, ret = 0;
int regno = addr >> 2; /* temporary hack. */
unsigned long __user *datap = (unsigned long __user *) data;
switch (request) {
/* read the word at location addr in the USER area. */
case PTRACE_PEEKUSR:
if (addr & 3)
goto out_eio;
if (regno >= 0 && regno < 19) {
tmp = get_reg(child, regno);
} else if (regno >= 21 && regno < 49) {
tmp = child->thread.fp[regno - 21];
/* Convert internal fpu reg representation
* into long double format
*/
if (FPU_IS_EMU && (regno < 45) && !(regno % 3))
tmp = ((tmp & 0xffff0000) << 15) |
((tmp & 0x0000ffff) << 16);
} else
goto out_eio;
ret = put_user(tmp, datap);
break;
case PTRACE_POKEUSR:
/* write the word at location addr in the USER area */
if (addr & 3)
goto out_eio;
if (regno == PT_SR) {
data &= SR_MASK;
data |= get_reg(child, PT_SR) & ~SR_MASK;
}
if (regno >= 0 && regno < 19) {
if (put_reg(child, regno, data))
goto out_eio;
} else if (regno >= 21 && regno < 48) {
/* Convert long double format
* into internal fpu reg representation
*/
if (FPU_IS_EMU && (regno < 45) && !(regno % 3)) {
data <<= 15;
data = (data & 0xffff0000) |
((data & 0x0000ffff) >> 1);
}
child->thread.fp[regno - 21] = data;
} else
goto out_eio;
break;
case PTRACE_GETREGS: /* Get all gp regs from the child. */
for (i = 0; i < 19; i++) {
tmp = get_reg(child, i);
ret = put_user(tmp, datap);
if (ret)
break;
datap++;
}
break;
case PTRACE_SETREGS: /* Set all gp regs in the child. */
for (i = 0; i < 19; i++) {
ret = get_user(tmp, datap);
if (ret)
break;
if (i == PT_SR) {
tmp &= SR_MASK;
tmp |= get_reg(child, PT_SR) & ~SR_MASK;
}
put_reg(child, i, tmp);
datap++;
}
break;
case PTRACE_GETFPREGS: /* Get the child FPU state. */
if (copy_to_user(datap, &child->thread.fp,
sizeof(struct user_m68kfp_struct)))
ret = -EFAULT;
break;
case PTRACE_SETFPREGS: /* Set the child FPU state. */
if (copy_from_user(&child->thread.fp, datap,
sizeof(struct user_m68kfp_struct)))
ret = -EFAULT;
break;
case PTRACE_GET_THREAD_AREA:
ret = put_user(task_thread_info(child)->tp_value, datap);
break;
default:
ret = ptrace_request(child, request, addr, data);
break;
}
return ret;
out_eio:
return -EIO;
}
asmlinkage void syscall_trace(void)
{
ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
? 0x80 : 0));
/*
* this isn't the same as continuing with a signal, but it will do
* for normal use. strace only continues with a signal if the
* stopping signal is not SIGTRAP. -brl
*/
if (current->exit_code) {
send_sig(current->exit_code, current, 1);
current->exit_code = 0;
}
}
#ifdef CONFIG_COLDFIRE
asmlinkage int syscall_trace_enter(void)
{
int ret = 0;
if (test_thread_flag(TIF_SYSCALL_TRACE))
ret = tracehook_report_syscall_entry(task_pt_regs(current));
return ret;
}
asmlinkage void syscall_trace_leave(void)
{
if (test_thread_flag(TIF_SYSCALL_TRACE))
tracehook_report_syscall_exit(task_pt_regs(current), 0);
}
#endif /* CONFIG_COLDFIRE */
/*
* linux/arch/m68knommu/kernel/ptrace.c
*
* Copyright (C) 1994 by Hamish Macdonald
* Taken from linux/kernel/ptrace.c and modified for M680x0.
* linux/kernel/ptrace.c is by Ross Biro 1/23/92, edited by Linus Torvalds
*
* This file is subject to the terms and conditions of the GNU General
* Public License. See the file COPYING in the main directory of
* this archive for more details.
*/
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/smp.h>
#include <linux/errno.h>
#include <linux/ptrace.h>
#include <linux/user.h>
#include <linux/signal.h>
#include <linux/tracehook.h>
#include <asm/uaccess.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/system.h>
#include <asm/processor.h>
/*
* does not yet catch signals sent when the child dies.
* in exit.c or in signal.c.
*/
/* determines which bits in the SR the user has access to. */
/* 1 = access 0 = no access */
#define SR_MASK 0x001f
/* sets the trace bits. */
#define TRACE_BITS 0x8000
/* Find the stack offset for a register, relative to thread.esp0. */
#define PT_REG(reg) ((long)&((struct pt_regs *)0)->reg)
#define SW_REG(reg) ((long)&((struct switch_stack *)0)->reg \
- sizeof(struct switch_stack))
/* Mapping from PT_xxx to the stack offset at which the register is
saved. Notice that usp has no stack-slot and needs to be treated
specially (see get_reg/put_reg below). */
static int regoff[] = {
PT_REG(d1), PT_REG(d2), PT_REG(d3), PT_REG(d4),
PT_REG(d5), SW_REG(d6), SW_REG(d7), PT_REG(a0),
PT_REG(a1), PT_REG(a2), SW_REG(a3), SW_REG(a4),
SW_REG(a5), SW_REG(a6), PT_REG(d0), -1,
PT_REG(orig_d0), PT_REG(sr), PT_REG(pc),
};
/*
* Get contents of register REGNO in task TASK.
*/
static inline long get_reg(struct task_struct *task, int regno)
{
unsigned long *addr;
if (regno == PT_USP)
addr = &task->thread.usp;
else if (regno < ARRAY_SIZE(regoff))
addr = (unsigned long *)(task->thread.esp0 + regoff[regno]);
else
return 0;
return *addr;
}
/*
* Write contents of register REGNO in task TASK.
*/
static inline int put_reg(struct task_struct *task, int regno,
unsigned long data)
{
unsigned long *addr;
if (regno == PT_USP)
addr = &task->thread.usp;
else if (regno < ARRAY_SIZE(regoff))
addr = (unsigned long *) (task->thread.esp0 + regoff[regno]);
else
return -1;
*addr = data;
return 0;
}
void user_enable_single_step(struct task_struct *task)
{
unsigned long srflags;
srflags = get_reg(task, PT_SR) | (TRACE_BITS << 16);
put_reg(task, PT_SR, srflags);
}
void user_disable_single_step(struct task_struct *task)
{
unsigned long srflags;
srflags = get_reg(task, PT_SR) & ~(TRACE_BITS << 16);
put_reg(task, PT_SR, srflags);
}
/*
* Called by kernel/ptrace.c when detaching..
*
* Make sure the single step bit is not set.
*/
void ptrace_disable(struct task_struct *child)
{
/* make sure the single step bit is not set. */
user_disable_single_step(child);
}
long arch_ptrace(struct task_struct *child, long request,
unsigned long addr, unsigned long data)
{
int ret;
int regno = addr >> 2;
unsigned long __user *datap = (unsigned long __user *) data;
switch (request) {
/* read the word at location addr in the USER area. */
case PTRACE_PEEKUSR: {
unsigned long tmp;
ret = -EIO;
if ((addr & 3) || addr > sizeof(struct user) - 3)
break;
tmp = 0; /* Default return condition */
ret = -EIO;
if (regno < 19) {
tmp = get_reg(child, regno);
if (regno == PT_SR)
tmp >>= 16;
} else if (regno >= 21 && regno < 49) {
tmp = child->thread.fp[regno - 21];
} else if (regno == 49) {
tmp = child->mm->start_code;
} else if (regno == 50) {
tmp = child->mm->start_data;
} else if (regno == 51) {
tmp = child->mm->end_code;
} else
break;
ret = put_user(tmp, datap);
break;
}
case PTRACE_POKEUSR: /* write the word at location addr in the USER area */
ret = -EIO;
if ((addr & 3) || addr > sizeof(struct user) - 3)
break;
if (regno == PT_SR) {
data &= SR_MASK;
data <<= 16;
data |= get_reg(child, PT_SR) & ~(SR_MASK << 16);
}
if (regno < 19) {
if (put_reg(child, regno, data))
break;
ret = 0;
break;
}
if (regno >= 21 && regno < 48)
{
child->thread.fp[regno - 21] = data;
ret = 0;
}
break;
case PTRACE_GETREGS: { /* Get all gp regs from the child. */
int i;
unsigned long tmp;
for (i = 0; i < 19; i++) {
tmp = get_reg(child, i);
if (i == PT_SR)
tmp >>= 16;
if (put_user(tmp, datap)) {
ret = -EFAULT;
break;
}
datap++;
}
ret = 0;
break;
}
case PTRACE_SETREGS: { /* Set all gp regs in the child. */
int i;
unsigned long tmp;
for (i = 0; i < 19; i++) {
if (get_user(tmp, datap)) {
ret = -EFAULT;
break;
}
if (i == PT_SR) {
tmp &= SR_MASK;
tmp <<= 16;
tmp |= get_reg(child, PT_SR) & ~(SR_MASK << 16);
}
put_reg(child, i, tmp);
datap++;
}
ret = 0;
break;
}
#ifdef PTRACE_GETFPREGS
case PTRACE_GETFPREGS: { /* Get the child FPU state. */
ret = 0;
if (copy_to_user(datap, &child->thread.fp,
sizeof(struct user_m68kfp_struct)))
ret = -EFAULT;
break;
}
#endif
#ifdef PTRACE_SETFPREGS
case PTRACE_SETFPREGS: { /* Set the child FPU state. */
ret = 0;
if (copy_from_user(&child->thread.fp, datap,
sizeof(struct user_m68kfp_struct)))
ret = -EFAULT;
break;
}
#endif
case PTRACE_GET_THREAD_AREA:
ret = put_user(task_thread_info(child)->tp_value, datap);
break;
default:
ret = ptrace_request(child, request, addr, data);
break;
}
return ret;
}
asmlinkage int syscall_trace_enter(void)
{
int ret = 0;
if (test_thread_flag(TIF_SYSCALL_TRACE))
ret = tracehook_report_syscall_entry(task_pt_regs(current));
return ret;
}
asmlinkage void syscall_trace_leave(void)
{
if (test_thread_flag(TIF_SYSCALL_TRACE))
tracehook_report_syscall_exit(task_pt_regs(current), 0);
}
...@@ -31,6 +31,7 @@ ...@@ -31,6 +31,7 @@
#include <linux/init.h> #include <linux/init.h>
#include <linux/initrd.h> #include <linux/initrd.h>
#include <linux/root_dev.h> #include <linux/root_dev.h>
#include <linux/rtc.h>
#include <asm/setup.h> #include <asm/setup.h>
#include <asm/irq.h> #include <asm/irq.h>
...@@ -47,7 +48,9 @@ EXPORT_SYMBOL(memory_end); ...@@ -47,7 +48,9 @@ EXPORT_SYMBOL(memory_end);
char __initdata command_line[COMMAND_LINE_SIZE]; char __initdata command_line[COMMAND_LINE_SIZE];
/* machine dependent timer functions */ /* machine dependent timer functions */
void (*mach_sched_init)(irq_handler_t handler) __initdata = NULL;
int (*mach_set_clock_mmss)(unsigned long); int (*mach_set_clock_mmss)(unsigned long);
int (*mach_hwclk) (int, struct rtc_time*);
/* machine dependent reboot functions */ /* machine dependent reboot functions */
void (*mach_reset)(void); void (*mach_reset)(void);
......
#if defined(CONFIG_MMU) && !defined(CONFIG_COLDFIRE) /*
#include "time_mm.c" * linux/arch/m68k/kernel/time.c
#else *
#include "time_no.c" * Copyright (C) 1991, 1992, 1995 Linus Torvalds
#endif *
* This file contains the m68k-specific time handling details.
* Most of the stuff is located in the machine specific files.
*
* 1997-09-10 Updated NTP code according to technical memorandum Jan '96
* "A Kernel Model for Precision Timekeeping" by Dave Mills
*/
#include <linux/errno.h>
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/param.h>
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/rtc.h>
#include <linux/platform_device.h>
#include <asm/machdep.h>
#include <asm/io.h>
#include <asm/irq_regs.h>
#include <linux/time.h>
#include <linux/timex.h>
#include <linux/profile.h>
/*
* timer_interrupt() needs to keep up the real-time clock,
* as well as call the "xtime_update()" routine every clocktick
*/
static irqreturn_t timer_interrupt(int irq, void *dummy)
{
xtime_update(1);
update_process_times(user_mode(get_irq_regs()));
profile_tick(CPU_PROFILING);
#ifdef CONFIG_HEARTBEAT
/* use power LED as a heartbeat instead -- much more useful
for debugging -- based on the version for PReP by Cort */
/* acts like an actual heart beat -- ie thump-thump-pause... */
if (mach_heartbeat) {
static unsigned cnt = 0, period = 0, dist = 0;
if (cnt == 0 || cnt == dist)
mach_heartbeat( 1 );
else if (cnt == 7 || cnt == dist+7)
mach_heartbeat( 0 );
if (++cnt > period) {
cnt = 0;
/* The hyperbolic function below modifies the heartbeat period
* length in dependency of the current (5min) load. It goes
* through the points f(0)=126, f(1)=86, f(5)=51,
* f(inf)->30. */
period = ((672<<FSHIFT)/(5*avenrun[0]+(7<<FSHIFT))) + 30;
dist = period / 4;
}
}
#endif /* CONFIG_HEARTBEAT */
return IRQ_HANDLED;
}
void read_persistent_clock(struct timespec *ts)
{
struct rtc_time time;
ts->tv_sec = 0;
ts->tv_nsec = 0;
if (mach_hwclk) {
mach_hwclk(0, &time);
if ((time.tm_year += 1900) < 1970)
time.tm_year += 100;
ts->tv_sec = mktime(time.tm_year, time.tm_mon, time.tm_mday,
time.tm_hour, time.tm_min, time.tm_sec);
}
}
void __init time_init(void)
{
mach_sched_init(timer_interrupt);
}
#ifdef CONFIG_M68KCLASSIC
u32 arch_gettimeoffset(void)
{
return mach_gettimeoffset() * 1000;
}
static int __init rtc_init(void)
{
struct platform_device *pdev;
if (!mach_hwclk)
return -ENODEV;
pdev = platform_device_register_simple("rtc-generic", -1, NULL, 0);
if (IS_ERR(pdev))
return PTR_ERR(pdev);
return 0;
}
module_init(rtc_init);
#endif /* CONFIG_M68KCLASSIC */
/*
* linux/arch/m68k/kernel/time.c
*
* Copyright (C) 1991, 1992, 1995 Linus Torvalds
*
* This file contains the m68k-specific time handling details.
* Most of the stuff is located in the machine specific files.
*
* 1997-09-10 Updated NTP code according to technical memorandum Jan '96
* "A Kernel Model for Precision Timekeeping" by Dave Mills
*/
#include <linux/errno.h>
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/param.h>
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/rtc.h>
#include <linux/platform_device.h>
#include <asm/machdep.h>
#include <asm/io.h>
#include <asm/irq_regs.h>
#include <linux/time.h>
#include <linux/timex.h>
#include <linux/profile.h>
static inline int set_rtc_mmss(unsigned long nowtime)
{
if (mach_set_clock_mmss)
return mach_set_clock_mmss (nowtime);
return -1;
}
/*
* timer_interrupt() needs to keep up the real-time clock,
* as well as call the "xtime_update()" routine every clocktick
*/
static irqreturn_t timer_interrupt(int irq, void *dummy)
{
xtime_update(1);
update_process_times(user_mode(get_irq_regs()));
profile_tick(CPU_PROFILING);
#ifdef CONFIG_HEARTBEAT
/* use power LED as a heartbeat instead -- much more useful
for debugging -- based on the version for PReP by Cort */
/* acts like an actual heart beat -- ie thump-thump-pause... */
if (mach_heartbeat) {
static unsigned cnt = 0, period = 0, dist = 0;
if (cnt == 0 || cnt == dist)
mach_heartbeat( 1 );
else if (cnt == 7 || cnt == dist+7)
mach_heartbeat( 0 );
if (++cnt > period) {
cnt = 0;
/* The hyperbolic function below modifies the heartbeat period
* length in dependency of the current (5min) load. It goes
* through the points f(0)=126, f(1)=86, f(5)=51,
* f(inf)->30. */
period = ((672<<FSHIFT)/(5*avenrun[0]+(7<<FSHIFT))) + 30;
dist = period / 4;
}
}
#endif /* CONFIG_HEARTBEAT */
return IRQ_HANDLED;
}
void read_persistent_clock(struct timespec *ts)
{
struct rtc_time time;
ts->tv_sec = 0;
ts->tv_nsec = 0;
if (mach_hwclk) {
mach_hwclk(0, &time);
if ((time.tm_year += 1900) < 1970)
time.tm_year += 100;
ts->tv_sec = mktime(time.tm_year, time.tm_mon, time.tm_mday,
time.tm_hour, time.tm_min, time.tm_sec);
}
}
void __init time_init(void)
{
mach_sched_init(timer_interrupt);
}
u32 arch_gettimeoffset(void)
{
return mach_gettimeoffset() * 1000;
}
static int __init rtc_init(void)
{
struct platform_device *pdev;
if (!mach_hwclk)
return -ENODEV;
pdev = platform_device_register_simple("rtc-generic", -1, NULL, 0);
if (IS_ERR(pdev))
return PTR_ERR(pdev);
return 0;
}
module_init(rtc_init);
/*
* linux/arch/m68knommu/kernel/time.c
*
* Copyright (C) 1991, 1992, 1995 Linus Torvalds
*
* This file contains the m68k-specific time handling details.
* Most of the stuff is located in the machine specific files.
*
* 1997-09-10 Updated NTP code according to technical memorandum Jan '96
* "A Kernel Model for Precision Timekeeping" by Dave Mills
*/
#include <linux/errno.h>
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/param.h>
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/profile.h>
#include <linux/time.h>
#include <linux/timex.h>
#include <asm/machdep.h>
#include <asm/irq_regs.h>
#define TICK_SIZE (tick_nsec / 1000)
/* machine dependent timer functions */
void (*mach_gettod)(int*, int*, int*, int*, int*, int*);
static inline int set_rtc_mmss(unsigned long nowtime)
{
if (mach_set_clock_mmss)
return mach_set_clock_mmss (nowtime);
return -1;
}
#ifndef CONFIG_GENERIC_CLOCKEVENTS
/*
* timer_interrupt() needs to keep up the real-time clock,
* as well as call the "xtime_update()" routine every clocktick
*/
irqreturn_t arch_timer_interrupt(int irq, void *dummy)
{
if (current->pid)
profile_tick(CPU_PROFILING);
xtime_update(1);
update_process_times(user_mode(get_irq_regs()));
return(IRQ_HANDLED);
}
#endif
static unsigned long read_rtc_mmss(void)
{
unsigned int year, mon, day, hour, min, sec;
if (mach_gettod) {
mach_gettod(&year, &mon, &day, &hour, &min, &sec);
if ((year += 1900) < 1970)
year += 100;
} else {
year = 1970;
mon = day = 1;
hour = min = sec = 0;
}
return mktime(year, mon, day, hour, min, sec);
}
void read_persistent_clock(struct timespec *ts)
{
ts->tv_sec = read_rtc_mmss();
ts->tv_nsec = 0;
}
int update_persistent_clock(struct timespec now)
{
return set_rtc_mmss(now.tv_sec);
}
void time_init(void)
{
hw_timer_init();
}
/* /*
* vmlinux.lds.S -- master linker script for m68knommu arch * vmlinux.lds.S -- master linker script for m68knommu arch
* *
* (C) Copyright 2002-2006, Greg Ungerer <gerg@snapgear.com> * (C) Copyright 2002-2012, Greg Ungerer <gerg@snapgear.com>
* *
* This linker script is equipped to build either ROM loaded or RAM * This linker script is equipped to build either ROM loaded or RAM
* run kernels. * run kernels.
*/ */
#include <asm-generic/vmlinux.lds.h>
#include <asm/page.h>
#include <asm/thread_info.h>
#if defined(CONFIG_RAMKERNEL) #if defined(CONFIG_RAMKERNEL)
#define RAM_START CONFIG_KERNELBASE #define KTEXT_ADDR CONFIG_KERNELBASE
#define RAM_LENGTH (CONFIG_RAMBASE + CONFIG_RAMSIZE - CONFIG_KERNELBASE)
#define TEXT ram
#define DATA ram
#define INIT ram
#define BSSS ram
#endif
#if defined(CONFIG_ROMKERNEL) || defined(CONFIG_HIMEMKERNEL)
#define RAM_START CONFIG_RAMBASE
#define RAM_LENGTH CONFIG_RAMSIZE
#define ROMVEC_START CONFIG_ROMVEC
#define ROMVEC_LENGTH CONFIG_ROMVECSIZE
#define ROM_START CONFIG_ROMSTART
#define ROM_LENGTH CONFIG_ROMSIZE
#define TEXT rom
#define DATA ram
#define INIT ram
#define BSSS ram
#endif #endif
#if defined(CONFIG_ROMKERNEL)
#ifndef DATA_ADDR #define KTEXT_ADDR CONFIG_ROMSTART
#define DATA_ADDR #define KDATA_ADDR CONFIG_KERNELBASE
#define LOAD_OFFSET KDATA_ADDR + (ADDR(.text) + SIZEOF(.text))
#endif #endif
#include <asm/page.h>
#include <asm/thread_info.h>
#include <asm-generic/vmlinux.lds.h>
OUTPUT_ARCH(m68k) OUTPUT_ARCH(m68k)
ENTRY(_start) ENTRY(_start)
MEMORY {
ram : ORIGIN = RAM_START, LENGTH = RAM_LENGTH
#ifdef ROM_START
romvec : ORIGIN = ROMVEC_START, LENGTH = ROMVEC_LENGTH
rom : ORIGIN = ROM_START, LENGTH = ROM_LENGTH
#endif
}
jiffies = jiffies_64 + 4; jiffies = jiffies_64 + 4;
SECTIONS { SECTIONS {
#ifdef ROMVEC_START #ifdef CONFIG_ROMVEC
. = ROMVEC_START ; . = CONFIG_ROMVEC;
.romvec : { .romvec : {
__rom_start = . ; __rom_start = .;
_romvec = .; _romvec = .;
*(.romvec)
*(.data..initvect) *(.data..initvect)
} > romvec }
#endif #endif
. = KTEXT_ADDR;
_text = .;
_stext = .;
.text : { .text : {
_text = .;
_stext = . ;
HEAD_TEXT HEAD_TEXT
TEXT_TEXT TEXT_TEXT
SCHED_TEXT SCHED_TEXT
LOCK_TEXT LOCK_TEXT
*(.text..lock)
*(.fixup) *(.fixup)
. = ALIGN(16);
}
_etext = .;
#ifdef KDATA_ADDR
. = KDATA_ADDR;
#endif
_sdata = .;
RO_DATA_SECTION(PAGE_SIZE)
RW_DATA_SECTION(16, PAGE_SIZE, THREAD_SIZE)
_edata = .;
. = ALIGN(16); /* Exception table */ EXCEPTION_TABLE(16)
__start___ex_table = .; NOTES
*(__ex_table)
__stop___ex_table = .;
*(.rodata) *(.rodata.*)
*(__vermagic) /* Kernel version magic */
*(.rodata1)
*(.rodata.str1.1)
/* Kernel symbol table: Normal symbols */
. = ALIGN(4);
__start___ksymtab = .;
*(SORT(___ksymtab+*))
__stop___ksymtab = .;
/* Kernel symbol table: GPL-only symbols */
__start___ksymtab_gpl = .;
*(SORT(___ksymtab_gpl+*))
__stop___ksymtab_gpl = .;
/* Kernel symbol table: Normal unused symbols */
__start___ksymtab_unused = .;
*(SORT(___ksymtab_unused+*))
__stop___ksymtab_unused = .;
/* Kernel symbol table: GPL-only unused symbols */
__start___ksymtab_unused_gpl = .;
*(SORT(___ksymtab_unused_gpl+*))
__stop___ksymtab_unused_gpl = .;
/* Kernel symbol table: GPL-future symbols */
__start___ksymtab_gpl_future = .;
*(SORT(___ksymtab_gpl_future+*))
__stop___ksymtab_gpl_future = .;
/* Kernel symbol table: Normal symbols */
__start___kcrctab = .;
*(SORT(___kcrctab+*))
__stop___kcrctab = .;
/* Kernel symbol table: GPL-only symbols */
__start___kcrctab_gpl = .;
*(SORT(___kcrctab_gpl+*))
__stop___kcrctab_gpl = .;
/* Kernel symbol table: Normal unused symbols */
__start___kcrctab_unused = .;
*(SORT(___kcrctab_unused+*))
__stop___kcrctab_unused = .;
/* Kernel symbol table: GPL-only unused symbols */
__start___kcrctab_unused_gpl = .;
*(SORT(___kcrctab_unused_gpl+*))
__stop___kcrctab_unused_gpl = .;
/* Kernel symbol table: GPL-future symbols */
__start___kcrctab_gpl_future = .;
*(SORT(___kcrctab_gpl_future+*))
__stop___kcrctab_gpl_future = .;
/* Kernel symbol table: strings */
*(__ksymtab_strings)
/* Built-in module parameters */
. = ALIGN(4) ;
__start___param = .;
*(__param)
__stop___param = .;
/* Built-in module versions */
. = ALIGN(4) ;
__start___modver = .;
*(__modver)
__stop___modver = .;
. = ALIGN(4) ;
_etext = . ;
} > TEXT
.data DATA_ADDR : {
. = ALIGN(4);
_sdata = . ;
DATA_DATA
CACHELINE_ALIGNED_DATA(32)
PAGE_ALIGNED_DATA(PAGE_SIZE)
*(.data..shared_aligned)
INIT_TASK_DATA(THREAD_SIZE)
_edata = . ;
} > DATA
. = ALIGN(PAGE_SIZE);
__init_begin = .;
INIT_TEXT_SECTION(PAGE_SIZE)
INIT_DATA_SECTION(16)
PERCPU_SECTION(16)
.m68k_fixup : { .m68k_fixup : {
__start_fixup = .; __start_fixup = .;
*(.m68k_fixup) *(.m68k_fixup)
__stop_fixup = .; __stop_fixup = .;
} > DATA }
NOTES > DATA
.init.text : {
. = ALIGN(PAGE_SIZE);
__init_begin = .;
} > INIT
INIT_TEXT_SECTION(PAGE_SIZE) > INIT
INIT_DATA_SECTION(16) > INIT
.init.data : { .init.data : {
. = ALIGN(PAGE_SIZE); . = ALIGN(PAGE_SIZE);
__init_end = .; __init_end = .;
} > INIT }
.bss : { _sbss = .;
. = ALIGN(4); BSS_SECTION(0, 0, 0)
_sbss = . ; _ebss = .;
*(.bss)
*(COMMON) _end = .;
. = ALIGN(4) ;
_ebss = . ; STABS_DEBUG
_end = . ; .comment 0 : { *(.comment) }
} > BSSS
/* Sections to be discarded */
DISCARDS DISCARDS
} }
...@@ -16,83 +16,6 @@ ...@@ -16,83 +16,6 @@
#include <asm/machdep.h> #include <asm/machdep.h>
#include <asm/coldfire.h> #include <asm/coldfire.h>
#include <asm/mcfsim.h> #include <asm/mcfsim.h>
#include <asm/mcfuart.h>
/***************************************************************************/
static struct mcf_platform_uart m5206_uart_platform[] = {
{
.mapbase = MCF_MBAR + MCFUART_BASE1,
.irq = 73,
},
{
.mapbase = MCF_MBAR + MCFUART_BASE2,
.irq = 74,
},
{ },
};
static struct platform_device m5206_uart = {
.name = "mcfuart",
.id = 0,
.dev.platform_data = m5206_uart_platform,
};
static struct platform_device *m5206_devices[] __initdata = {
&m5206_uart,
};
/***************************************************************************/
static void __init m5206_uart_init_line(int line, int irq)
{
if (line == 0) {
writel(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCF_MBAR + MCFSIM_UART1ICR);
writeb(irq, MCFUART_BASE1 + MCFUART_UIVR);
mcf_mapirq2imr(irq, MCFINTC_UART0);
} else if (line == 1) {
writel(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCF_MBAR + MCFSIM_UART2ICR);
writeb(irq, MCFUART_BASE2 + MCFUART_UIVR);
mcf_mapirq2imr(irq, MCFINTC_UART1);
}
}
static void __init m5206_uarts_init(void)
{
const int nrlines = ARRAY_SIZE(m5206_uart_platform);
int line;
for (line = 0; (line < nrlines); line++)
m5206_uart_init_line(line, m5206_uart_platform[line].irq);
}
/***************************************************************************/
static void __init m5206_timers_init(void)
{
/* Timer1 is always used as system timer */
writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI3,
MCF_MBAR + MCFSIM_TIMER1ICR);
mcf_mapirq2imr(MCF_IRQ_TIMER, MCFINTC_TIMER1);
#ifdef CONFIG_HIGHPROFILE
/* Timer2 is to be used as a high speed profile timer */
writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | MCFSIM_ICR_PRI3,
MCF_MBAR + MCFSIM_TIMER2ICR);
mcf_mapirq2imr(MCF_IRQ_PROFILER, MCFINTC_TIMER2);
#endif
}
/***************************************************************************/
void m5206_cpu_reset(void)
{
local_irq_disable();
/* Set watchdog to soft reset, and enabled */
__raw_writeb(0xc0, MCF_MBAR + MCFSIM_SYPCR);
for (;;)
/* wait for watchdog to timeout */;
}
/***************************************************************************/ /***************************************************************************/
...@@ -104,9 +27,7 @@ void __init config_BSP(char *commandp, int size) ...@@ -104,9 +27,7 @@ void __init config_BSP(char *commandp, int size)
commandp[size-1] = 0; commandp[size-1] = 0;
#endif /* CONFIG_NETtel */ #endif /* CONFIG_NETtel */
mach_reset = m5206_cpu_reset; mach_sched_init = hw_timer_init;
m5206_timers_init();
m5206_uarts_init();
/* Only support the external interrupts on their primary level */ /* Only support the external interrupts on their primary level */
mcf_mapirq2imr(25, MCFINTC_EINT1); mcf_mapirq2imr(25, MCFINTC_EINT1);
...@@ -115,13 +36,3 @@ void __init config_BSP(char *commandp, int size) ...@@ -115,13 +36,3 @@ void __init config_BSP(char *commandp, int size)
} }
/***************************************************************************/ /***************************************************************************/
static int __init init_BSP(void)
{
platform_add_devices(m5206_devices, ARRAY_SIZE(m5206_devices));
return 0;
}
arch_initcall(init_BSP);
/***************************************************************************/
...@@ -15,194 +15,14 @@ ...@@ -15,194 +15,14 @@
#include <linux/param.h> #include <linux/param.h>
#include <linux/init.h> #include <linux/init.h>
#include <linux/io.h> #include <linux/io.h>
#include <linux/spi/spi.h>
#include <linux/gpio.h>
#include <asm/machdep.h> #include <asm/machdep.h>
#include <asm/coldfire.h> #include <asm/coldfire.h>
#include <asm/mcfsim.h> #include <asm/mcfsim.h>
#include <asm/mcfuart.h> #include <asm/mcfuart.h>
#include <asm/mcfqspi.h>
/***************************************************************************/ /***************************************************************************/
static struct mcf_platform_uart m520x_uart_platform[] = { #ifdef CONFIG_SPI_COLDFIRE_QSPI
{
.mapbase = MCFUART_BASE1,
.irq = MCFINT_VECBASE + MCFINT_UART0,
},
{
.mapbase = MCFUART_BASE2,
.irq = MCFINT_VECBASE + MCFINT_UART1,
},
{
.mapbase = MCFUART_BASE3,
.irq = MCFINT_VECBASE + MCFINT_UART2,
},
{ },
};
static struct platform_device m520x_uart = {
.name = "mcfuart",
.id = 0,
.dev.platform_data = m520x_uart_platform,
};
static struct resource m520x_fec_resources[] = {
{
.start = MCFFEC_BASE,
.end = MCFFEC_BASE + MCFFEC_SIZE - 1,
.flags = IORESOURCE_MEM,
},
{
.start = 64 + 36,
.end = 64 + 36,
.flags = IORESOURCE_IRQ,
},
{
.start = 64 + 40,
.end = 64 + 40,
.flags = IORESOURCE_IRQ,
},
{
.start = 64 + 42,
.end = 64 + 42,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device m520x_fec = {
.name = "fec",
.id = 0,
.num_resources = ARRAY_SIZE(m520x_fec_resources),
.resource = m520x_fec_resources,
};
#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
static struct resource m520x_qspi_resources[] = {
{
.start = MCFQSPI_IOBASE,
.end = MCFQSPI_IOBASE + MCFQSPI_IOSIZE - 1,
.flags = IORESOURCE_MEM,
},
{
.start = MCFINT_VECBASE + MCFINT_QSPI,
.end = MCFINT_VECBASE + MCFINT_QSPI,
.flags = IORESOURCE_IRQ,
},
};
#define MCFQSPI_CS0 46
#define MCFQSPI_CS1 47
#define MCFQSPI_CS2 27
static int m520x_cs_setup(struct mcfqspi_cs_control *cs_control)
{
int status;
status = gpio_request(MCFQSPI_CS0, "MCFQSPI_CS0");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS0 failed\n");
goto fail0;
}
status = gpio_direction_output(MCFQSPI_CS0, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS0 failed\n");
goto fail1;
}
status = gpio_request(MCFQSPI_CS1, "MCFQSPI_CS1");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS1 failed\n");
goto fail1;
}
status = gpio_direction_output(MCFQSPI_CS1, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS1 failed\n");
goto fail2;
}
status = gpio_request(MCFQSPI_CS2, "MCFQSPI_CS2");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS2 failed\n");
goto fail2;
}
status = gpio_direction_output(MCFQSPI_CS2, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS2 failed\n");
goto fail3;
}
return 0;
fail3:
gpio_free(MCFQSPI_CS2);
fail2:
gpio_free(MCFQSPI_CS1);
fail1:
gpio_free(MCFQSPI_CS0);
fail0:
return status;
}
static void m520x_cs_teardown(struct mcfqspi_cs_control *cs_control)
{
gpio_free(MCFQSPI_CS2);
gpio_free(MCFQSPI_CS1);
gpio_free(MCFQSPI_CS0);
}
static void m520x_cs_select(struct mcfqspi_cs_control *cs_control,
u8 chip_select, bool cs_high)
{
switch (chip_select) {
case 0:
gpio_set_value(MCFQSPI_CS0, cs_high);
break;
case 1:
gpio_set_value(MCFQSPI_CS1, cs_high);
break;
case 2:
gpio_set_value(MCFQSPI_CS2, cs_high);
break;
}
}
static void m520x_cs_deselect(struct mcfqspi_cs_control *cs_control,
u8 chip_select, bool cs_high)
{
switch (chip_select) {
case 0:
gpio_set_value(MCFQSPI_CS0, !cs_high);
break;
case 1:
gpio_set_value(MCFQSPI_CS1, !cs_high);
break;
case 2:
gpio_set_value(MCFQSPI_CS2, !cs_high);
break;
}
}
static struct mcfqspi_cs_control m520x_cs_control = {
.setup = m520x_cs_setup,
.teardown = m520x_cs_teardown,
.select = m520x_cs_select,
.deselect = m520x_cs_deselect,
};
static struct mcfqspi_platform_data m520x_qspi_data = {
.bus_num = 0,
.num_chipselect = 3,
.cs_control = &m520x_cs_control,
};
static struct platform_device m520x_qspi = {
.name = "mcfqspi",
.id = 0,
.num_resources = ARRAY_SIZE(m520x_qspi_resources),
.resource = m520x_qspi_resources,
.dev.platform_data = &m520x_qspi_data,
};
static void __init m520x_qspi_init(void) static void __init m520x_qspi_init(void)
{ {
...@@ -214,54 +34,28 @@ static void __init m520x_qspi_init(void) ...@@ -214,54 +34,28 @@ static void __init m520x_qspi_init(void)
par &= 0x00ff; par &= 0x00ff;
writew(par, MCF_GPIO_PAR_UART); writew(par, MCF_GPIO_PAR_UART);
} }
#endif /* defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) */
static struct platform_device *m520x_devices[] __initdata = { #endif /* CONFIG_SPI_COLDFIRE_QSPI */
&m520x_uart,
&m520x_fec,
#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
&m520x_qspi,
#endif
};
/***************************************************************************/ /***************************************************************************/
static void __init m520x_uart_init_line(int line, int irq) static void __init m520x_uarts_init(void)
{ {
u16 par; u16 par;
u8 par2; u8 par2;
switch (line) { /* UART0 and UART1 GPIO pin setup */
case 0: par = readw(MCF_GPIO_PAR_UART);
par = readw(MCF_GPIO_PAR_UART); par |= MCF_GPIO_PAR_UART_PAR_UTXD0 | MCF_GPIO_PAR_UART_PAR_URXD0;
par |= MCF_GPIO_PAR_UART_PAR_UTXD0 | par |= MCF_GPIO_PAR_UART_PAR_UTXD1 | MCF_GPIO_PAR_UART_PAR_URXD1;
MCF_GPIO_PAR_UART_PAR_URXD0; writew(par, MCF_GPIO_PAR_UART);
writew(par, MCF_GPIO_PAR_UART);
break;
case 1:
par = readw(MCF_GPIO_PAR_UART);
par |= MCF_GPIO_PAR_UART_PAR_UTXD1 |
MCF_GPIO_PAR_UART_PAR_URXD1;
writew(par, MCF_GPIO_PAR_UART);
break;
case 2:
par2 = readb(MCF_GPIO_PAR_FECI2C);
par2 &= ~0x0F;
par2 |= MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2 |
MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2;
writeb(par2, MCF_GPIO_PAR_FECI2C);
break;
}
}
static void __init m520x_uarts_init(void)
{
const int nrlines = ARRAY_SIZE(m520x_uart_platform);
int line;
for (line = 0; (line < nrlines); line++) /* UART1 GPIO pin setup */
m520x_uart_init_line(line, m520x_uart_platform[line].irq); par2 = readb(MCF_GPIO_PAR_FECI2C);
par2 &= ~0x0F;
par2 |= MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2 |
MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2;
writeb(par2, MCF_GPIO_PAR_FECI2C);
} }
/***************************************************************************/ /***************************************************************************/
...@@ -280,32 +74,14 @@ static void __init m520x_fec_init(void) ...@@ -280,32 +74,14 @@ static void __init m520x_fec_init(void)
/***************************************************************************/ /***************************************************************************/
static void m520x_cpu_reset(void)
{
local_irq_disable();
__raw_writeb(MCF_RCR_SWRESET, MCF_RCR);
}
/***************************************************************************/
void __init config_BSP(char *commandp, int size) void __init config_BSP(char *commandp, int size)
{ {
mach_reset = m520x_cpu_reset; mach_sched_init = hw_timer_init;
m520x_uarts_init(); m520x_uarts_init();
m520x_fec_init(); m520x_fec_init();
#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) #ifdef CONFIG_SPI_COLDFIRE_QSPI
m520x_qspi_init(); m520x_qspi_init();
#endif #endif
} }
/***************************************************************************/ /***************************************************************************/
static int __init init_BSP(void)
{
platform_add_devices(m520x_devices, ARRAY_SIZE(m520x_devices));
return 0;
}
arch_initcall(init_BSP);
/***************************************************************************/
...@@ -16,215 +16,13 @@ ...@@ -16,215 +16,13 @@
#include <linux/param.h> #include <linux/param.h>
#include <linux/init.h> #include <linux/init.h>
#include <linux/io.h> #include <linux/io.h>
#include <linux/spi/spi.h>
#include <linux/gpio.h>
#include <asm/machdep.h> #include <asm/machdep.h>
#include <asm/coldfire.h> #include <asm/coldfire.h>
#include <asm/mcfsim.h> #include <asm/mcfsim.h>
#include <asm/mcfuart.h>
#include <asm/mcfqspi.h>
/***************************************************************************/ /***************************************************************************/
static struct mcf_platform_uart m523x_uart_platform[] = { #ifdef CONFIG_SPI_COLDFIRE_QSPI
{
.mapbase = MCFUART_BASE1,
.irq = MCFINT_VECBASE + MCFINT_UART0,
},
{
.mapbase = MCFUART_BASE2,
.irq = MCFINT_VECBASE + MCFINT_UART0 + 1,
},
{
.mapbase = MCFUART_BASE3,
.irq = MCFINT_VECBASE + MCFINT_UART0 + 2,
},
{ },
};
static struct platform_device m523x_uart = {
.name = "mcfuart",
.id = 0,
.dev.platform_data = m523x_uart_platform,
};
static struct resource m523x_fec_resources[] = {
{
.start = MCFFEC_BASE,
.end = MCFFEC_BASE + MCFFEC_SIZE - 1,
.flags = IORESOURCE_MEM,
},
{
.start = 64 + 23,
.end = 64 + 23,
.flags = IORESOURCE_IRQ,
},
{
.start = 64 + 27,
.end = 64 + 27,
.flags = IORESOURCE_IRQ,
},
{
.start = 64 + 29,
.end = 64 + 29,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device m523x_fec = {
.name = "fec",
.id = 0,
.num_resources = ARRAY_SIZE(m523x_fec_resources),
.resource = m523x_fec_resources,
};
#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
static struct resource m523x_qspi_resources[] = {
{
.start = MCFQSPI_IOBASE,
.end = MCFQSPI_IOBASE + MCFQSPI_IOSIZE - 1,
.flags = IORESOURCE_MEM,
},
{
.start = MCFINT_VECBASE + MCFINT_QSPI,
.end = MCFINT_VECBASE + MCFINT_QSPI,
.flags = IORESOURCE_IRQ,
},
};
#define MCFQSPI_CS0 91
#define MCFQSPI_CS1 92
#define MCFQSPI_CS2 103
#define MCFQSPI_CS3 99
static int m523x_cs_setup(struct mcfqspi_cs_control *cs_control)
{
int status;
status = gpio_request(MCFQSPI_CS0, "MCFQSPI_CS0");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS0 failed\n");
goto fail0;
}
status = gpio_direction_output(MCFQSPI_CS0, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS0 failed\n");
goto fail1;
}
status = gpio_request(MCFQSPI_CS1, "MCFQSPI_CS1");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS1 failed\n");
goto fail1;
}
status = gpio_direction_output(MCFQSPI_CS1, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS1 failed\n");
goto fail2;
}
status = gpio_request(MCFQSPI_CS2, "MCFQSPI_CS2");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS2 failed\n");
goto fail2;
}
status = gpio_direction_output(MCFQSPI_CS2, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS2 failed\n");
goto fail3;
}
status = gpio_request(MCFQSPI_CS3, "MCFQSPI_CS3");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS3 failed\n");
goto fail3;
}
status = gpio_direction_output(MCFQSPI_CS3, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS3 failed\n");
goto fail4;
}
return 0;
fail4:
gpio_free(MCFQSPI_CS3);
fail3:
gpio_free(MCFQSPI_CS2);
fail2:
gpio_free(MCFQSPI_CS1);
fail1:
gpio_free(MCFQSPI_CS0);
fail0:
return status;
}
static void m523x_cs_teardown(struct mcfqspi_cs_control *cs_control)
{
gpio_free(MCFQSPI_CS3);
gpio_free(MCFQSPI_CS2);
gpio_free(MCFQSPI_CS1);
gpio_free(MCFQSPI_CS0);
}
static void m523x_cs_select(struct mcfqspi_cs_control *cs_control,
u8 chip_select, bool cs_high)
{
switch (chip_select) {
case 0:
gpio_set_value(MCFQSPI_CS0, cs_high);
break;
case 1:
gpio_set_value(MCFQSPI_CS1, cs_high);
break;
case 2:
gpio_set_value(MCFQSPI_CS2, cs_high);
break;
case 3:
gpio_set_value(MCFQSPI_CS3, cs_high);
break;
}
}
static void m523x_cs_deselect(struct mcfqspi_cs_control *cs_control,
u8 chip_select, bool cs_high)
{
switch (chip_select) {
case 0:
gpio_set_value(MCFQSPI_CS0, !cs_high);
break;
case 1:
gpio_set_value(MCFQSPI_CS1, !cs_high);
break;
case 2:
gpio_set_value(MCFQSPI_CS2, !cs_high);
break;
case 3:
gpio_set_value(MCFQSPI_CS3, !cs_high);
break;
}
}
static struct mcfqspi_cs_control m523x_cs_control = {
.setup = m523x_cs_setup,
.teardown = m523x_cs_teardown,
.select = m523x_cs_select,
.deselect = m523x_cs_deselect,
};
static struct mcfqspi_platform_data m523x_qspi_data = {
.bus_num = 0,
.num_chipselect = 4,
.cs_control = &m523x_cs_control,
};
static struct platform_device m523x_qspi = {
.name = "mcfqspi",
.id = 0,
.num_resources = ARRAY_SIZE(m523x_qspi_resources),
.resource = m523x_qspi_resources,
.dev.platform_data = &m523x_qspi_data,
};
static void __init m523x_qspi_init(void) static void __init m523x_qspi_init(void)
{ {
...@@ -237,15 +35,8 @@ static void __init m523x_qspi_init(void) ...@@ -237,15 +35,8 @@ static void __init m523x_qspi_init(void)
par &= 0x3f3f; par &= 0x3f3f;
writew(par, MCFGPIO_PAR_TIMER); writew(par, MCFGPIO_PAR_TIMER);
} }
#endif /* defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) */
static struct platform_device *m523x_devices[] __initdata = { #endif /* CONFIG_SPI_COLDFIRE_QSPI */
&m523x_uart,
&m523x_fec,
#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
&m523x_qspi,
#endif
};
/***************************************************************************/ /***************************************************************************/
...@@ -263,31 +54,13 @@ static void __init m523x_fec_init(void) ...@@ -263,31 +54,13 @@ static void __init m523x_fec_init(void)
/***************************************************************************/ /***************************************************************************/
static void m523x_cpu_reset(void)
{
local_irq_disable();
__raw_writeb(MCF_RCR_SWRESET, MCF_IPSBAR + MCF_RCR);
}
/***************************************************************************/
void __init config_BSP(char *commandp, int size) void __init config_BSP(char *commandp, int size)
{ {
mach_reset = m523x_cpu_reset; mach_sched_init = hw_timer_init;
}
/***************************************************************************/
static int __init init_BSP(void)
{
m523x_fec_init(); m523x_fec_init();
#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) #ifdef CONFIG_SPI_COLDFIRE_QSPI
m523x_qspi_init(); m523x_qspi_init();
#endif #endif
platform_add_devices(m523x_devices, ARRAY_SIZE(m523x_devices));
return 0;
} }
arch_initcall(init_BSP);
/***************************************************************************/ /***************************************************************************/
...@@ -12,34 +12,13 @@ ...@@ -12,34 +12,13 @@
#include <linux/param.h> #include <linux/param.h>
#include <linux/init.h> #include <linux/init.h>
#include <linux/io.h> #include <linux/io.h>
#include <linux/spi/spi.h> #include <linux/platform_device.h>
#include <linux/gpio.h>
#include <asm/machdep.h> #include <asm/machdep.h>
#include <asm/coldfire.h> #include <asm/coldfire.h>
#include <asm/mcfsim.h> #include <asm/mcfsim.h>
#include <asm/mcfuart.h>
#include <asm/mcfqspi.h>
/***************************************************************************/ /***************************************************************************/
static struct mcf_platform_uart m5249_uart_platform[] = {
{
.mapbase = MCF_MBAR + MCFUART_BASE1,
.irq = 73,
},
{
.mapbase = MCF_MBAR + MCFUART_BASE2,
.irq = 74,
},
{ },
};
static struct platform_device m5249_uart = {
.name = "mcfuart",
.id = 0,
.dev.platform_data = m5249_uart_platform,
};
#ifdef CONFIG_M5249C3 #ifdef CONFIG_M5249C3
static struct resource m5249_smc91x_resources[] = { static struct resource m5249_smc91x_resources[] = {
...@@ -64,153 +43,15 @@ static struct platform_device m5249_smc91x = { ...@@ -64,153 +43,15 @@ static struct platform_device m5249_smc91x = {
#endif /* CONFIG_M5249C3 */ #endif /* CONFIG_M5249C3 */
#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) static struct platform_device *m5249_devices[] __initdata = {
static struct resource m5249_qspi_resources[] = { #ifdef CONFIG_M5249C3
{ &m5249_smc91x,
.start = MCFQSPI_IOBASE, #endif
.end = MCFQSPI_IOBASE + MCFQSPI_IOSIZE - 1,
.flags = IORESOURCE_MEM,
},
{
.start = MCF_IRQ_QSPI,
.end = MCF_IRQ_QSPI,
.flags = IORESOURCE_IRQ,
},
};
#define MCFQSPI_CS0 29
#define MCFQSPI_CS1 24
#define MCFQSPI_CS2 21
#define MCFQSPI_CS3 22
static int m5249_cs_setup(struct mcfqspi_cs_control *cs_control)
{
int status;
status = gpio_request(MCFQSPI_CS0, "MCFQSPI_CS0");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS0 failed\n");
goto fail0;
}
status = gpio_direction_output(MCFQSPI_CS0, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS0 failed\n");
goto fail1;
}
status = gpio_request(MCFQSPI_CS1, "MCFQSPI_CS1");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS1 failed\n");
goto fail1;
}
status = gpio_direction_output(MCFQSPI_CS1, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS1 failed\n");
goto fail2;
}
status = gpio_request(MCFQSPI_CS2, "MCFQSPI_CS2");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS2 failed\n");
goto fail2;
}
status = gpio_direction_output(MCFQSPI_CS2, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS2 failed\n");
goto fail3;
}
status = gpio_request(MCFQSPI_CS3, "MCFQSPI_CS3");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS3 failed\n");
goto fail3;
}
status = gpio_direction_output(MCFQSPI_CS3, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS3 failed\n");
goto fail4;
}
return 0;
fail4:
gpio_free(MCFQSPI_CS3);
fail3:
gpio_free(MCFQSPI_CS2);
fail2:
gpio_free(MCFQSPI_CS1);
fail1:
gpio_free(MCFQSPI_CS0);
fail0:
return status;
}
static void m5249_cs_teardown(struct mcfqspi_cs_control *cs_control)
{
gpio_free(MCFQSPI_CS3);
gpio_free(MCFQSPI_CS2);
gpio_free(MCFQSPI_CS1);
gpio_free(MCFQSPI_CS0);
}
static void m5249_cs_select(struct mcfqspi_cs_control *cs_control,
u8 chip_select, bool cs_high)
{
switch (chip_select) {
case 0:
gpio_set_value(MCFQSPI_CS0, cs_high);
break;
case 1:
gpio_set_value(MCFQSPI_CS1, cs_high);
break;
case 2:
gpio_set_value(MCFQSPI_CS2, cs_high);
break;
case 3:
gpio_set_value(MCFQSPI_CS3, cs_high);
break;
}
}
static void m5249_cs_deselect(struct mcfqspi_cs_control *cs_control,
u8 chip_select, bool cs_high)
{
switch (chip_select) {
case 0:
gpio_set_value(MCFQSPI_CS0, !cs_high);
break;
case 1:
gpio_set_value(MCFQSPI_CS1, !cs_high);
break;
case 2:
gpio_set_value(MCFQSPI_CS2, !cs_high);
break;
case 3:
gpio_set_value(MCFQSPI_CS3, !cs_high);
break;
}
}
static struct mcfqspi_cs_control m5249_cs_control = {
.setup = m5249_cs_setup,
.teardown = m5249_cs_teardown,
.select = m5249_cs_select,
.deselect = m5249_cs_deselect,
}; };
static struct mcfqspi_platform_data m5249_qspi_data = { /***************************************************************************/
.bus_num = 0,
.num_chipselect = 4,
.cs_control = &m5249_cs_control,
};
static struct platform_device m5249_qspi = { #ifdef CONFIG_SPI_COLDFIRE_QSPI
.name = "mcfqspi",
.id = 0,
.num_resources = ARRAY_SIZE(m5249_qspi_resources),
.resource = m5249_qspi_resources,
.dev.platform_data = &m5249_qspi_data,
};
static void __init m5249_qspi_init(void) static void __init m5249_qspi_init(void)
{ {
...@@ -219,42 +60,8 @@ static void __init m5249_qspi_init(void) ...@@ -219,42 +60,8 @@ static void __init m5249_qspi_init(void)
MCF_MBAR + MCFSIM_QSPIICR); MCF_MBAR + MCFSIM_QSPIICR);
mcf_mapirq2imr(MCF_IRQ_QSPI, MCFINTC_QSPI); mcf_mapirq2imr(MCF_IRQ_QSPI, MCFINTC_QSPI);
} }
#endif /* defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) */
#endif /* CONFIG_SPI_COLDFIRE_QSPI */
static struct platform_device *m5249_devices[] __initdata = {
&m5249_uart,
#ifdef CONFIG_M5249C3
&m5249_smc91x,
#endif
#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
&m5249_qspi,
#endif
};
/***************************************************************************/
static void __init m5249_uart_init_line(int line, int irq)
{
if (line == 0) {
writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCF_MBAR + MCFSIM_UART1ICR);
writeb(irq, MCF_MBAR + MCFUART_BASE1 + MCFUART_UIVR);
mcf_mapirq2imr(irq, MCFINTC_UART0);
} else if (line == 1) {
writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCF_MBAR + MCFSIM_UART2ICR);
writeb(irq, MCF_MBAR + MCFUART_BASE2 + MCFUART_UIVR);
mcf_mapirq2imr(irq, MCFINTC_UART1);
}
}
static void __init m5249_uarts_init(void)
{
const int nrlines = ARRAY_SIZE(m5249_uart_platform);
int line;
for (line = 0; (line < nrlines); line++)
m5249_uart_init_line(line, m5249_uart_platform[line].irq);
}
/***************************************************************************/ /***************************************************************************/
...@@ -276,43 +83,14 @@ static void __init m5249_smc91x_init(void) ...@@ -276,43 +83,14 @@ static void __init m5249_smc91x_init(void)
/***************************************************************************/ /***************************************************************************/
static void __init m5249_timers_init(void)
{
/* Timer1 is always used as system timer */
writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI3,
MCF_MBAR + MCFSIM_TIMER1ICR);
mcf_mapirq2imr(MCF_IRQ_TIMER, MCFINTC_TIMER1);
#ifdef CONFIG_HIGHPROFILE
/* Timer2 is to be used as a high speed profile timer */
writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | MCFSIM_ICR_PRI3,
MCF_MBAR + MCFSIM_TIMER2ICR);
mcf_mapirq2imr(MCF_IRQ_PROFILER, MCFINTC_TIMER2);
#endif
}
/***************************************************************************/
void m5249_cpu_reset(void)
{
local_irq_disable();
/* Set watchdog to soft reset, and enabled */
__raw_writeb(0xc0, MCF_MBAR + MCFSIM_SYPCR);
for (;;)
/* wait for watchdog to timeout */;
}
/***************************************************************************/
void __init config_BSP(char *commandp, int size) void __init config_BSP(char *commandp, int size)
{ {
mach_reset = m5249_cpu_reset; mach_sched_init = hw_timer_init;
m5249_timers_init();
m5249_uarts_init();
#ifdef CONFIG_M5249C3 #ifdef CONFIG_M5249C3
m5249_smc91x_init(); m5249_smc91x_init();
#endif #endif
#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) #ifdef CONFIG_SPI_COLDFIRE_QSPI
m5249_qspi_init(); m5249_qspi_init();
#endif #endif
} }
......
...@@ -30,84 +30,18 @@ unsigned char ledbank = 0xff; ...@@ -30,84 +30,18 @@ unsigned char ledbank = 0xff;
/***************************************************************************/ /***************************************************************************/
static struct mcf_platform_uart m5272_uart_platform[] = { static void __init m5272_uarts_init(void)
{
.mapbase = MCF_MBAR + MCFUART_BASE1,
.irq = MCF_IRQ_UART1,
},
{
.mapbase = MCF_MBAR + MCFUART_BASE2,
.irq = MCF_IRQ_UART2,
},
{ },
};
static struct platform_device m5272_uart = {
.name = "mcfuart",
.id = 0,
.dev.platform_data = m5272_uart_platform,
};
static struct resource m5272_fec_resources[] = {
{
.start = MCF_MBAR + 0x840,
.end = MCF_MBAR + 0x840 + 0x1cf,
.flags = IORESOURCE_MEM,
},
{
.start = MCF_IRQ_ERX,
.end = MCF_IRQ_ERX,
.flags = IORESOURCE_IRQ,
},
{
.start = MCF_IRQ_ETX,
.end = MCF_IRQ_ETX,
.flags = IORESOURCE_IRQ,
},
{
.start = MCF_IRQ_ENTC,
.end = MCF_IRQ_ENTC,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device m5272_fec = {
.name = "fec",
.id = 0,
.num_resources = ARRAY_SIZE(m5272_fec_resources),
.resource = m5272_fec_resources,
};
static struct platform_device *m5272_devices[] __initdata = {
&m5272_uart,
&m5272_fec,
};
/***************************************************************************/
static void __init m5272_uart_init_line(int line, int irq)
{ {
u32 v; u32 v;
if ((line >= 0) && (line < 2)) { /* Enable the output lines for the serial ports */
/* Enable the output lines for the serial ports */ v = readl(MCF_MBAR + MCFSIM_PBCNT);
v = readl(MCF_MBAR + MCFSIM_PBCNT); v = (v & ~0x000000ff) | 0x00000055;
v = (v & ~0x000000ff) | 0x00000055; writel(v, MCF_MBAR + MCFSIM_PBCNT);
writel(v, MCF_MBAR + MCFSIM_PBCNT);
v = readl(MCF_MBAR + MCFSIM_PDCNT);
v = (v & ~0x000003fc) | 0x000002a8;
writel(v, MCF_MBAR + MCFSIM_PDCNT);
}
}
static void __init m5272_uarts_init(void)
{
const int nrlines = ARRAY_SIZE(m5272_uart_platform);
int line;
for (line = 0; (line < nrlines); line++) v = readl(MCF_MBAR + MCFSIM_PDCNT);
m5272_uart_init_line(line, m5272_uart_platform[line].irq); v = (v & ~0x000003fc) | 0x000002a8;
writel(v, MCF_MBAR + MCFSIM_PDCNT);
} }
/***************************************************************************/ /***************************************************************************/
...@@ -146,6 +80,7 @@ void __init config_BSP(char *commandp, int size) ...@@ -146,6 +80,7 @@ void __init config_BSP(char *commandp, int size)
#endif #endif
mach_reset = m5272_cpu_reset; mach_reset = m5272_cpu_reset;
mach_sched_init = hw_timer_init;
} }
/***************************************************************************/ /***************************************************************************/
...@@ -167,7 +102,6 @@ static int __init init_BSP(void) ...@@ -167,7 +102,6 @@ static int __init init_BSP(void)
{ {
m5272_uarts_init(); m5272_uarts_init();
fixed_phy_add(PHY_POLL, 0, &nettel_fixed_phy_status); fixed_phy_add(PHY_POLL, 0, &nettel_fixed_phy_status);
platform_add_devices(m5272_devices, ARRAY_SIZE(m5272_devices));
return 0; return 0;
} }
......
...@@ -16,253 +16,14 @@ ...@@ -16,253 +16,14 @@
#include <linux/param.h> #include <linux/param.h>
#include <linux/init.h> #include <linux/init.h>
#include <linux/io.h> #include <linux/io.h>
#include <linux/spi/spi.h>
#include <linux/gpio.h>
#include <asm/machdep.h> #include <asm/machdep.h>
#include <asm/coldfire.h> #include <asm/coldfire.h>
#include <asm/mcfsim.h> #include <asm/mcfsim.h>
#include <asm/mcfuart.h> #include <asm/mcfuart.h>
#include <asm/mcfqspi.h>
/***************************************************************************/ /***************************************************************************/
static struct mcf_platform_uart m527x_uart_platform[] = { #ifdef CONFIG_SPI_COLDFIRE_QSPI
{
.mapbase = MCFUART_BASE1,
.irq = MCFINT_VECBASE + MCFINT_UART0,
},
{
.mapbase = MCFUART_BASE2,
.irq = MCFINT_VECBASE + MCFINT_UART1,
},
{
.mapbase = MCFUART_BASE3,
.irq = MCFINT_VECBASE + MCFINT_UART2,
},
{ },
};
static struct platform_device m527x_uart = {
.name = "mcfuart",
.id = 0,
.dev.platform_data = m527x_uart_platform,
};
static struct resource m527x_fec0_resources[] = {
{
.start = MCFFEC_BASE0,
.end = MCFFEC_BASE0 + MCFFEC_SIZE0 - 1,
.flags = IORESOURCE_MEM,
},
{
.start = 64 + 23,
.end = 64 + 23,
.flags = IORESOURCE_IRQ,
},
{
.start = 64 + 27,
.end = 64 + 27,
.flags = IORESOURCE_IRQ,
},
{
.start = 64 + 29,
.end = 64 + 29,
.flags = IORESOURCE_IRQ,
},
};
static struct resource m527x_fec1_resources[] = {
{
.start = MCFFEC_BASE1,
.end = MCFFEC_BASE1 + MCFFEC_SIZE1 - 1,
.flags = IORESOURCE_MEM,
},
{
.start = 128 + 23,
.end = 128 + 23,
.flags = IORESOURCE_IRQ,
},
{
.start = 128 + 27,
.end = 128 + 27,
.flags = IORESOURCE_IRQ,
},
{
.start = 128 + 29,
.end = 128 + 29,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device m527x_fec[] = {
{
.name = "fec",
.id = 0,
.num_resources = ARRAY_SIZE(m527x_fec0_resources),
.resource = m527x_fec0_resources,
},
{
.name = "fec",
.id = 1,
.num_resources = ARRAY_SIZE(m527x_fec1_resources),
.resource = m527x_fec1_resources,
},
};
#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
static struct resource m527x_qspi_resources[] = {
{
.start = MCFQSPI_IOBASE,
.end = MCFQSPI_IOBASE + MCFQSPI_IOSIZE - 1,
.flags = IORESOURCE_MEM,
},
{
.start = MCFINT_VECBASE + MCFINT_QSPI,
.end = MCFINT_VECBASE + MCFINT_QSPI,
.flags = IORESOURCE_IRQ,
},
};
#if defined(CONFIG_M5271)
#define MCFQSPI_CS0 91
#define MCFQSPI_CS1 92
#define MCFQSPI_CS2 99
#define MCFQSPI_CS3 103
#elif defined(CONFIG_M5275)
#define MCFQSPI_CS0 59
#define MCFQSPI_CS1 60
#define MCFQSPI_CS2 61
#define MCFQSPI_CS3 62
#endif
static int m527x_cs_setup(struct mcfqspi_cs_control *cs_control)
{
int status;
status = gpio_request(MCFQSPI_CS0, "MCFQSPI_CS0");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS0 failed\n");
goto fail0;
}
status = gpio_direction_output(MCFQSPI_CS0, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS0 failed\n");
goto fail1;
}
status = gpio_request(MCFQSPI_CS1, "MCFQSPI_CS1");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS1 failed\n");
goto fail1;
}
status = gpio_direction_output(MCFQSPI_CS1, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS1 failed\n");
goto fail2;
}
status = gpio_request(MCFQSPI_CS2, "MCFQSPI_CS2");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS2 failed\n");
goto fail2;
}
status = gpio_direction_output(MCFQSPI_CS2, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS2 failed\n");
goto fail3;
}
status = gpio_request(MCFQSPI_CS3, "MCFQSPI_CS3");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS3 failed\n");
goto fail3;
}
status = gpio_direction_output(MCFQSPI_CS3, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS3 failed\n");
goto fail4;
}
return 0;
fail4:
gpio_free(MCFQSPI_CS3);
fail3:
gpio_free(MCFQSPI_CS2);
fail2:
gpio_free(MCFQSPI_CS1);
fail1:
gpio_free(MCFQSPI_CS0);
fail0:
return status;
}
static void m527x_cs_teardown(struct mcfqspi_cs_control *cs_control)
{
gpio_free(MCFQSPI_CS3);
gpio_free(MCFQSPI_CS2);
gpio_free(MCFQSPI_CS1);
gpio_free(MCFQSPI_CS0);
}
static void m527x_cs_select(struct mcfqspi_cs_control *cs_control,
u8 chip_select, bool cs_high)
{
switch (chip_select) {
case 0:
gpio_set_value(MCFQSPI_CS0, cs_high);
break;
case 1:
gpio_set_value(MCFQSPI_CS1, cs_high);
break;
case 2:
gpio_set_value(MCFQSPI_CS2, cs_high);
break;
case 3:
gpio_set_value(MCFQSPI_CS3, cs_high);
break;
}
}
static void m527x_cs_deselect(struct mcfqspi_cs_control *cs_control,
u8 chip_select, bool cs_high)
{
switch (chip_select) {
case 0:
gpio_set_value(MCFQSPI_CS0, !cs_high);
break;
case 1:
gpio_set_value(MCFQSPI_CS1, !cs_high);
break;
case 2:
gpio_set_value(MCFQSPI_CS2, !cs_high);
break;
case 3:
gpio_set_value(MCFQSPI_CS3, !cs_high);
break;
}
}
static struct mcfqspi_cs_control m527x_cs_control = {
.setup = m527x_cs_setup,
.teardown = m527x_cs_teardown,
.select = m527x_cs_select,
.deselect = m527x_cs_deselect,
};
static struct mcfqspi_platform_data m527x_qspi_data = {
.bus_num = 0,
.num_chipselect = 4,
.cs_control = &m527x_cs_control,
};
static struct platform_device m527x_qspi = {
.name = "mcfqspi",
.id = 0,
.num_resources = ARRAY_SIZE(m527x_qspi_resources),
.resource = m527x_qspi_resources,
.dev.platform_data = &m527x_qspi_data,
};
static void __init m527x_qspi_init(void) static void __init m527x_qspi_init(void)
{ {
...@@ -280,50 +41,23 @@ static void __init m527x_qspi_init(void) ...@@ -280,50 +41,23 @@ static void __init m527x_qspi_init(void)
writew(0x003e, MCFGPIO_PAR_QSPI); writew(0x003e, MCFGPIO_PAR_QSPI);
#endif #endif
} }
#endif /* defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) */
static struct platform_device *m527x_devices[] __initdata = { #endif /* CONFIG_SPI_COLDFIRE_QSPI */
&m527x_uart,
&m527x_fec[0],
#ifdef CONFIG_FEC2
&m527x_fec[1],
#endif
#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
&m527x_qspi,
#endif
};
/***************************************************************************/ /***************************************************************************/
static void __init m527x_uart_init_line(int line, int irq) static void __init m527x_uarts_init(void)
{ {
u16 sepmask; u16 sepmask;
if ((line < 0) || (line > 2))
return;
/* /*
* External Pin Mask Setting & Enable External Pin for Interface * External Pin Mask Setting & Enable External Pin for Interface
*/ */
sepmask = readw(MCF_IPSBAR + MCF_GPIO_PAR_UART); sepmask = readw(MCF_IPSBAR + MCF_GPIO_PAR_UART);
if (line == 0) sepmask |= UART0_ENABLE_MASK | UART1_ENABLE_MASK | UART2_ENABLE_MASK;
sepmask |= UART0_ENABLE_MASK;
else if (line == 1)
sepmask |= UART1_ENABLE_MASK;
else if (line == 2)
sepmask |= UART2_ENABLE_MASK;
writew(sepmask, MCF_IPSBAR + MCF_GPIO_PAR_UART); writew(sepmask, MCF_IPSBAR + MCF_GPIO_PAR_UART);
} }
static void __init m527x_uarts_init(void)
{
const int nrlines = ARRAY_SIZE(m527x_uart_platform);
int line;
for (line = 0; (line < nrlines); line++)
m527x_uart_init_line(line, m527x_uart_platform[line].irq);
}
/***************************************************************************/ /***************************************************************************/
static void __init m527x_fec_init(void) static void __init m527x_fec_init(void)
...@@ -353,32 +87,14 @@ static void __init m527x_fec_init(void) ...@@ -353,32 +87,14 @@ static void __init m527x_fec_init(void)
/***************************************************************************/ /***************************************************************************/
static void m527x_cpu_reset(void)
{
local_irq_disable();
__raw_writeb(MCF_RCR_SWRESET, MCF_IPSBAR + MCF_RCR);
}
/***************************************************************************/
void __init config_BSP(char *commandp, int size) void __init config_BSP(char *commandp, int size)
{ {
mach_reset = m527x_cpu_reset; mach_sched_init = hw_timer_init;
m527x_uarts_init(); m527x_uarts_init();
m527x_fec_init(); m527x_fec_init();
#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) #ifdef CONFIG_SPI_COLDFIRE_QSPI
m527x_qspi_init(); m527x_qspi_init();
#endif #endif
} }
/***************************************************************************/ /***************************************************************************/
static int __init init_BSP(void)
{
platform_add_devices(m527x_devices, ARRAY_SIZE(m527x_devices));
return 0;
}
arch_initcall(init_BSP);
/***************************************************************************/
...@@ -17,229 +17,33 @@ ...@@ -17,229 +17,33 @@
#include <linux/init.h> #include <linux/init.h>
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/io.h> #include <linux/io.h>
#include <linux/spi/spi.h>
#include <linux/gpio.h>
#include <asm/machdep.h> #include <asm/machdep.h>
#include <asm/coldfire.h> #include <asm/coldfire.h>
#include <asm/mcfsim.h> #include <asm/mcfsim.h>
#include <asm/mcfuart.h> #include <asm/mcfuart.h>
#include <asm/mcfqspi.h>
/***************************************************************************/ /***************************************************************************/
static struct mcf_platform_uart m528x_uart_platform[] = { #ifdef CONFIG_SPI_COLDFIRE_QSPI
{
.mapbase = MCFUART_BASE1,
.irq = MCFINT_VECBASE + MCFINT_UART0,
},
{
.mapbase = MCFUART_BASE2,
.irq = MCFINT_VECBASE + MCFINT_UART0 + 1,
},
{
.mapbase = MCFUART_BASE3,
.irq = MCFINT_VECBASE + MCFINT_UART0 + 2,
},
{ },
};
static struct platform_device m528x_uart = {
.name = "mcfuart",
.id = 0,
.dev.platform_data = m528x_uart_platform,
};
static struct resource m528x_fec_resources[] = {
{
.start = MCFFEC_BASE,
.end = MCFFEC_BASE + MCFFEC_SIZE - 1,
.flags = IORESOURCE_MEM,
},
{
.start = 64 + 23,
.end = 64 + 23,
.flags = IORESOURCE_IRQ,
},
{
.start = 64 + 27,
.end = 64 + 27,
.flags = IORESOURCE_IRQ,
},
{
.start = 64 + 29,
.end = 64 + 29,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device m528x_fec = {
.name = "fec",
.id = 0,
.num_resources = ARRAY_SIZE(m528x_fec_resources),
.resource = m528x_fec_resources,
};
#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
static struct resource m528x_qspi_resources[] = {
{
.start = MCFQSPI_IOBASE,
.end = MCFQSPI_IOBASE + MCFQSPI_IOSIZE - 1,
.flags = IORESOURCE_MEM,
},
{
.start = MCFINT_VECBASE + MCFINT_QSPI,
.end = MCFINT_VECBASE + MCFINT_QSPI,
.flags = IORESOURCE_IRQ,
},
};
#define MCFQSPI_CS0 147
#define MCFQSPI_CS1 148
#define MCFQSPI_CS2 149
#define MCFQSPI_CS3 150
static int m528x_cs_setup(struct mcfqspi_cs_control *cs_control)
{
int status;
status = gpio_request(MCFQSPI_CS0, "MCFQSPI_CS0");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS0 failed\n");
goto fail0;
}
status = gpio_direction_output(MCFQSPI_CS0, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS0 failed\n");
goto fail1;
}
status = gpio_request(MCFQSPI_CS1, "MCFQSPI_CS1");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS1 failed\n");
goto fail1;
}
status = gpio_direction_output(MCFQSPI_CS1, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS1 failed\n");
goto fail2;
}
status = gpio_request(MCFQSPI_CS2, "MCFQSPI_CS2");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS2 failed\n");
goto fail2;
}
status = gpio_direction_output(MCFQSPI_CS2, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS2 failed\n");
goto fail3;
}
status = gpio_request(MCFQSPI_CS3, "MCFQSPI_CS3");
if (status) {
pr_debug("gpio_request for MCFQSPI_CS3 failed\n");
goto fail3;
}
status = gpio_direction_output(MCFQSPI_CS3, 1);
if (status) {
pr_debug("gpio_direction_output for MCFQSPI_CS3 failed\n");
goto fail4;
}
return 0;
fail4:
gpio_free(MCFQSPI_CS3);
fail3:
gpio_free(MCFQSPI_CS2);
fail2:
gpio_free(MCFQSPI_CS1);
fail1:
gpio_free(MCFQSPI_CS0);
fail0:
return status;
}
static void m528x_cs_teardown(struct mcfqspi_cs_control *cs_control)
{
gpio_free(MCFQSPI_CS3);
gpio_free(MCFQSPI_CS2);
gpio_free(MCFQSPI_CS1);
gpio_free(MCFQSPI_CS0);
}
static void m528x_cs_select(struct mcfqspi_cs_control *cs_control,
u8 chip_select, bool cs_high)
{
gpio_set_value(MCFQSPI_CS0 + chip_select, cs_high);
}
static void m528x_cs_deselect(struct mcfqspi_cs_control *cs_control,
u8 chip_select, bool cs_high)
{
gpio_set_value(MCFQSPI_CS0 + chip_select, !cs_high);
}
static struct mcfqspi_cs_control m528x_cs_control = {
.setup = m528x_cs_setup,
.teardown = m528x_cs_teardown,
.select = m528x_cs_select,
.deselect = m528x_cs_deselect,
};
static struct mcfqspi_platform_data m528x_qspi_data = {
.bus_num = 0,
.num_chipselect = 4,
.cs_control = &m528x_cs_control,
};
static struct platform_device m528x_qspi = {
.name = "mcfqspi",
.id = 0,
.num_resources = ARRAY_SIZE(m528x_qspi_resources),
.resource = m528x_qspi_resources,
.dev.platform_data = &m528x_qspi_data,
};
static void __init m528x_qspi_init(void) static void __init m528x_qspi_init(void)
{ {
/* setup Port QS for QSPI with gpio CS control */ /* setup Port QS for QSPI with gpio CS control */
__raw_writeb(0x07, MCFGPIO_PQSPAR); __raw_writeb(0x07, MCFGPIO_PQSPAR);
} }
#endif /* defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) */
static struct platform_device *m528x_devices[] __initdata = { #endif /* CONFIG_SPI_COLDFIRE_QSPI */
&m528x_uart,
&m528x_fec,
#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
&m528x_qspi,
#endif
};
/***************************************************************************/ /***************************************************************************/
static void __init m528x_uart_init_line(int line, int irq) static void __init m528x_uarts_init(void)
{ {
u8 port; u8 port;
if ((line < 0) || (line > 2))
return;
/* make sure PUAPAR is set for UART0 and UART1 */ /* make sure PUAPAR is set for UART0 and UART1 */
if (line < 2) { port = readb(MCF5282_GPIO_PUAPAR);
port = readb(MCF5282_GPIO_PUAPAR); port |= 0x03 | (0x03 << 2);
port |= (0x03 << (line * 2)); writeb(port, MCF5282_GPIO_PUAPAR);
writeb(port, MCF5282_GPIO_PUAPAR);
}
}
static void __init m528x_uarts_init(void)
{
const int nrlines = ARRAY_SIZE(m528x_uart_platform);
int line;
for (line = 0; (line < nrlines); line++)
m528x_uart_init_line(line, m528x_uart_platform[line].irq);
} }
/***************************************************************************/ /***************************************************************************/
...@@ -256,14 +60,6 @@ static void __init m528x_fec_init(void) ...@@ -256,14 +60,6 @@ static void __init m528x_fec_init(void)
/***************************************************************************/ /***************************************************************************/
static void m528x_cpu_reset(void)
{
local_irq_disable();
__raw_writeb(MCF_RCR_SWRESET, MCF_IPSBAR + MCF_RCR);
}
/***************************************************************************/
#ifdef CONFIG_WILDFIRE #ifdef CONFIG_WILDFIRE
void wildfire_halt(void) void wildfire_halt(void)
{ {
...@@ -299,22 +95,12 @@ void __init config_BSP(char *commandp, int size) ...@@ -299,22 +95,12 @@ void __init config_BSP(char *commandp, int size)
#ifdef CONFIG_WILDFIREMOD #ifdef CONFIG_WILDFIREMOD
mach_halt = wildfiremod_halt; mach_halt = wildfiremod_halt;
#endif #endif
} mach_sched_init = hw_timer_init;
/***************************************************************************/
static int __init init_BSP(void)
{
mach_reset = m528x_cpu_reset;
m528x_uarts_init(); m528x_uarts_init();
m528x_fec_init(); m528x_fec_init();
#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) #ifdef CONFIG_SPI_COLDFIRE_QSPI
m528x_qspi_init(); m528x_qspi_init();
#endif #endif
platform_add_devices(m528x_devices, ARRAY_SIZE(m528x_devices));
return 0;
} }
arch_initcall(init_BSP);
/***************************************************************************/ /***************************************************************************/
...@@ -16,7 +16,6 @@ ...@@ -16,7 +16,6 @@
#include <asm/machdep.h> #include <asm/machdep.h>
#include <asm/coldfire.h> #include <asm/coldfire.h>
#include <asm/mcfsim.h> #include <asm/mcfsim.h>
#include <asm/mcfuart.h>
#include <asm/mcfwdebug.h> #include <asm/mcfwdebug.h>
/***************************************************************************/ /***************************************************************************/
...@@ -29,82 +28,6 @@ unsigned char ledbank = 0xff; ...@@ -29,82 +28,6 @@ unsigned char ledbank = 0xff;
/***************************************************************************/ /***************************************************************************/
static struct mcf_platform_uart m5307_uart_platform[] = {
{
.mapbase = MCF_MBAR + MCFUART_BASE1,
.irq = 73,
},
{
.mapbase = MCF_MBAR + MCFUART_BASE2,
.irq = 74,
},
{ },
};
static struct platform_device m5307_uart = {
.name = "mcfuart",
.id = 0,
.dev.platform_data = m5307_uart_platform,
};
static struct platform_device *m5307_devices[] __initdata = {
&m5307_uart,
};
/***************************************************************************/
static void __init m5307_uart_init_line(int line, int irq)
{
if (line == 0) {
writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCF_MBAR + MCFSIM_UART1ICR);
writeb(irq, MCF_MBAR + MCFUART_BASE1 + MCFUART_UIVR);
mcf_mapirq2imr(irq, MCFINTC_UART0);
} else if (line == 1) {
writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCF_MBAR + MCFSIM_UART2ICR);
writeb(irq, MCF_MBAR + MCFUART_BASE2 + MCFUART_UIVR);
mcf_mapirq2imr(irq, MCFINTC_UART1);
}
}
static void __init m5307_uarts_init(void)
{
const int nrlines = ARRAY_SIZE(m5307_uart_platform);
int line;
for (line = 0; (line < nrlines); line++)
m5307_uart_init_line(line, m5307_uart_platform[line].irq);
}
/***************************************************************************/
static void __init m5307_timers_init(void)
{
/* Timer1 is always used as system timer */
writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI3,
MCF_MBAR + MCFSIM_TIMER1ICR);
mcf_mapirq2imr(MCF_IRQ_TIMER, MCFINTC_TIMER1);
#ifdef CONFIG_HIGHPROFILE
/* Timer2 is to be used as a high speed profile timer */
writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | MCFSIM_ICR_PRI3,
MCF_MBAR + MCFSIM_TIMER2ICR);
mcf_mapirq2imr(MCF_IRQ_PROFILER, MCFINTC_TIMER2);
#endif
}
/***************************************************************************/
void m5307_cpu_reset(void)
{
local_irq_disable();
/* Set watchdog to soft reset, and enabled */
__raw_writeb(0xc0, MCF_MBAR + MCFSIM_SYPCR);
for (;;)
/* wait for watchdog to timeout */;
}
/***************************************************************************/
void __init config_BSP(char *commandp, int size) void __init config_BSP(char *commandp, int size)
{ {
#if defined(CONFIG_NETtel) || \ #if defined(CONFIG_NETtel) || \
...@@ -114,9 +37,7 @@ void __init config_BSP(char *commandp, int size) ...@@ -114,9 +37,7 @@ void __init config_BSP(char *commandp, int size)
commandp[size-1] = 0; commandp[size-1] = 0;
#endif #endif
mach_reset = m5307_cpu_reset; mach_sched_init = hw_timer_init;
m5307_timers_init();
m5307_uarts_init();
/* Only support the external interrupts on their primary level */ /* Only support the external interrupts on their primary level */
mcf_mapirq2imr(25, MCFINTC_EINT1); mcf_mapirq2imr(25, MCFINTC_EINT1);
...@@ -135,13 +56,3 @@ void __init config_BSP(char *commandp, int size) ...@@ -135,13 +56,3 @@ void __init config_BSP(char *commandp, int size)
} }
/***************************************************************************/ /***************************************************************************/
static int __init init_BSP(void)
{
platform_add_devices(m5307_devices, ARRAY_SIZE(m5307_devices));
return 0;
}
arch_initcall(init_BSP);
/***************************************************************************/
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
...@@ -17,6 +17,7 @@ ...@@ -17,6 +17,7 @@
#include <linux/types.h> #include <linux/types.h>
#include <linux/kernel.h> #include <linux/kernel.h>
#include <linux/rtc.h>
#include <asm/system.h> #include <asm/system.h>
#include <asm/machdep.h> #include <asm/machdep.h>
#include <asm/MC68328.h> #include <asm/MC68328.h>
...@@ -26,7 +27,7 @@ ...@@ -26,7 +27,7 @@
/***************************************************************************/ /***************************************************************************/
void m68328_timer_gettod(int *year, int *mon, int *day, int *hour, int *min, int *sec); int m68328_hwclk(int set, struct rtc_time *t);
/***************************************************************************/ /***************************************************************************/
...@@ -48,7 +49,7 @@ void config_BSP(char *command, int len) ...@@ -48,7 +49,7 @@ void config_BSP(char *command, int len)
printk(KERN_INFO "68328 support Kenneth Albanowski <kjahds@kjshds.com>\n"); printk(KERN_INFO "68328 support Kenneth Albanowski <kjahds@kjshds.com>\n");
printk(KERN_INFO "68328/Pilot support Bernhard Kuhn <kuhn@lpr.e-technik.tu-muenchen.de>\n"); printk(KERN_INFO "68328/Pilot support Bernhard Kuhn <kuhn@lpr.e-technik.tu-muenchen.de>\n");
mach_gettod = m68328_timer_gettod; mach_hwclk = m68328_hwclk;
mach_reset = m68328_reset; mach_reset = m68328_reset;
} }
......
...@@ -68,8 +68,6 @@ asmlinkage irqreturn_t inthandler5(void); ...@@ -68,8 +68,6 @@ asmlinkage irqreturn_t inthandler5(void);
asmlinkage irqreturn_t inthandler6(void); asmlinkage irqreturn_t inthandler6(void);
asmlinkage irqreturn_t inthandler7(void); asmlinkage irqreturn_t inthandler7(void);
extern e_vector *_ramvec;
/* The 68k family did not have a good way to determine the source /* The 68k family did not have a good way to determine the source
* of interrupts until later in the family. The EC000 core does * of interrupts until later in the family. The EC000 core does
* not provide the vector number on the stack, we vector everything * not provide the vector number on the stack, we vector everything
......
...@@ -20,6 +20,7 @@ ...@@ -20,6 +20,7 @@
#include <linux/interrupt.h> #include <linux/interrupt.h>
#include <linux/irq.h> #include <linux/irq.h>
#include <linux/clocksource.h> #include <linux/clocksource.h>
#include <linux/rtc.h>
#include <asm/setup.h> #include <asm/setup.h>
#include <asm/system.h> #include <asm/system.h>
#include <asm/pgtable.h> #include <asm/pgtable.h>
...@@ -119,14 +120,17 @@ void hw_timer_init(void) ...@@ -119,14 +120,17 @@ void hw_timer_init(void)
/***************************************************************************/ /***************************************************************************/
void m68328_timer_gettod(int *year, int *mon, int *day, int *hour, int *min, int *sec) int m68328_hwclk(int set, struct rtc_time *t)
{ {
long now = RTCTIME; if (!set) {
long now = RTCTIME;
*year = *mon = *day = 1; t->tm_year = t->tm_mon = t->tm_mday = 1;
*hour = (now >> 24) % 24; t->tm_hour = (now >> 24) % 24;
*min = (now >> 16) % 60; t->tm_min = (now >> 16) % 60;
*sec = now % 60; t->tm_sec = now % 60;
}
return 0;
} }
/***************************************************************************/ /***************************************************************************/
...@@ -103,11 +103,6 @@ void hw_timer_init(void) ...@@ -103,11 +103,6 @@ void hw_timer_init(void)
pquicc->timer_tgcr = tgcr_save; pquicc->timer_tgcr = tgcr_save;
} }
void BSP_gettod (int *yearp, int *monp, int *dayp,
int *hourp, int *minp, int *secp)
{
}
int BSP_set_clock_mmss(unsigned long nowtime) int BSP_set_clock_mmss(unsigned long nowtime)
{ {
#if 0 #if 0
...@@ -181,6 +176,5 @@ void config_BSP(char *command, int len) ...@@ -181,6 +176,5 @@ void config_BSP(char *command, int len)
scc1_hwaddr = "\00\01\02\03\04\05"; scc1_hwaddr = "\00\01\02\03\04\05";
#endif #endif
mach_gettod = BSP_gettod; mach_reset = BSP_reset;
mach_reset = BSP_reset;
} }
...@@ -32,8 +32,6 @@ asmlinkage void trap(void); ...@@ -32,8 +32,6 @@ asmlinkage void trap(void);
asmlinkage void bad_interrupt(void); asmlinkage void bad_interrupt(void);
asmlinkage void inthandler(void); asmlinkage void inthandler(void);
extern void *_ramvec[];
static void intc_irq_unmask(struct irq_data *d) static void intc_irq_unmask(struct irq_data *d)
{ {
pquicc->intr_cimr |= (1 << d->irq); pquicc->intr_cimr |= (1 << d->irq);
......
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment