Commit b57d5437 authored by Arnd Bergmann's avatar Arnd Bergmann

Merge tag 'sunxi-fixes-for-5.10-1' of...

Merge tag 'sunxi-fixes-for-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes

Mostly some fixes for a fallout in a PHY driver that pointed out errors
in our DTs. Along with that, Jernej agreed to be a reviewer!

* tag 'sunxi-fixes-for-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  arm64: dts: allwinner: h5: OrangePi Prime: Fix ethernet node
  arm64: dts: allwinner: a64: bananapi-m64: Enable RGMII RX/TX delay on PHY
  arm64: dts: allwinner: h5: libretech-all-h5-cc: Enable RGMII RX/TX delay on PHY
  ARM: dts: sunxi: bananapi-m2-plus: Enable RGMII RX/TX delay on Ethernet PHY
  ARM: dts: sun9i: Enable both RGMII RX/TX delay on Ethernet PHY
  ARM: dts: sun8i: a83t: Enable both RGMII RX/TX delay on Ethernet PHY
  ARM: dts: sun8i: h3: orangepi-plus2e: Enable RGMII RX/TX delay on Ethernet PHY
  ARM: dts: sun7i: bananapi-m1-plus: Enable RGMII RX/TX delay on Ethernet PHY
  ARM: dts: sun7i: cubietruck: Enable RGMII RX/TX delay on Ethernet PHY
  ARM: dts: sun6i: a31-hummingbird: Enable RGMII RX/TX delay on Ethernet PHY
  Revert "arm: sun8i: orangepi-pc-plus: Set EMAC activity LEDs to active high"
  ARM: dts: sun8i: r40: bananapi-m2-ultra: Fix ethernet node
  arm64: dts: allwinner: h5: OrangePi PC2: Fix ethernet node
  arm64: dts: allwinner: a64: Pine64 Plus: Fix ethernet node
  arm64: dts: allwinner: a64: OrangePi Win: Fix ethernet node
  arm64: dts: allwinner: Pine H64: Enable both RGMII RX/TX delay
  arm64: dts: allwinner: beelink-gs1: Enable both RGMII RX/TX delay
  arm64: dts: allwinner: pinetab: Drop unnecessary address/size-cells information
  MAINTAINERS: Add Jernej Škrabec as a reviewer for Allwinner SoCs support

Link: https://lore.kernel.org/r/d1a1a6a6-fca4-4f1b-93b3-f2f6963b4e04.lettre@localhostSigned-off-by: default avatarArnd Bergmann <arnd@arndb.de>
parents 7e47a750 107954af
......@@ -1546,6 +1546,7 @@ F: drivers/clk/sunxi/
ARM/Allwinner sunXi SoC support
M: Maxime Ripard <mripard@kernel.org>
M: Chen-Yu Tsai <wens@csie.org>
R: Jernej Skrabec <jernej.skrabec@siol.net>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git
......
......@@ -154,7 +154,7 @@ &gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
phy-handle = <&phy1>;
phy-mode = "rgmii";
phy-mode = "rgmii-id";
status = "okay";
};
......
......@@ -130,7 +130,7 @@ &gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
phy-handle = <&phy1>;
phy-mode = "rgmii";
phy-mode = "rgmii-id";
phy-supply = <&reg_gmac_3v3>;
status = "okay";
};
......
......@@ -151,7 +151,7 @@ &gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
phy-handle = <&phy1>;
phy-mode = "rgmii";
phy-mode = "rgmii-id";
status = "okay";
};
......
......@@ -131,7 +131,7 @@ &emac {
pinctrl-0 = <&emac_rgmii_pins>;
phy-supply = <&reg_sw>;
phy-handle = <&rgmii_phy>;
phy-mode = "rgmii";
phy-mode = "rgmii-id";
allwinner,rx-delay-ps = <700>;
allwinner,tx-delay-ps = <700>;
status = "okay";
......
......@@ -183,7 +183,7 @@ &emac {
pinctrl-0 = <&emac_rgmii_pins>;
phy-supply = <&reg_dldo4>;
phy-handle = <&rgmii_phy>;
phy-mode = "rgmii";
phy-mode = "rgmii-id";
status = "okay";
};
......
......@@ -53,11 +53,6 @@ aliases {
};
};
&emac {
/* LEDs changed to active high on the plus */
/delete-property/ allwinner,leds-active-low;
};
&mmc1 {
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
......
......@@ -67,7 +67,7 @@ &emac {
pinctrl-0 = <&emac_rgmii_pins>;
phy-supply = <&reg_gmac_3v3>;
phy-handle = <&ext_rgmii_phy>;
phy-mode = "rgmii";
phy-mode = "rgmii-id";
status = "okay";
};
......
......@@ -129,7 +129,7 @@ &gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
phy-handle = <&phy1>;
phy-mode = "rgmii";
phy-mode = "rgmii-id";
phy-supply = <&reg_dc1sw>;
status = "okay";
};
......
......@@ -129,7 +129,7 @@ &gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
phy-handle = <&phy1>;
phy-mode = "rgmii";
phy-mode = "rgmii-id";
phy-supply = <&reg_cldo1>;
status = "okay";
};
......
......@@ -124,7 +124,7 @@ &gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
phy-handle = <&phy1>;
phy-mode = "rgmii";
phy-mode = "rgmii-id";
phy-supply = <&reg_cldo1>;
status = "okay";
};
......
......@@ -126,7 +126,7 @@ &emac {
pinctrl-0 = <&emac_rgmii_pins>;
phy-supply = <&reg_gmac_3v3>;
phy-handle = <&ext_rgmii_phy>;
phy-mode = "rgmii";
phy-mode = "rgmii-id";
status = "okay";
};
......
......@@ -105,7 +105,7 @@ &ehci1 {
&emac {
pinctrl-names = "default";
pinctrl-0 = <&rgmii_pins>;
phy-mode = "rgmii";
phy-mode = "rgmii-id";
phy-handle = <&ext_rgmii_phy>;
phy-supply = <&reg_dc1sw>;
status = "okay";
......
......@@ -120,7 +120,7 @@ &ehci1 {
&emac {
pinctrl-names = "default";
pinctrl-0 = <&rgmii_pins>;
phy-mode = "rgmii";
phy-mode = "rgmii-id";
phy-handle = <&ext_rgmii_phy>;
phy-supply = <&reg_gmac_3v3>;
status = "okay";
......
......@@ -13,7 +13,7 @@ / {
&emac {
pinctrl-names = "default";
pinctrl-0 = <&rgmii_pins>;
phy-mode = "rgmii";
phy-mode = "rgmii-txid";
phy-handle = <&ext_rgmii_phy>;
status = "okay";
};
......
......@@ -122,9 +122,6 @@ &csi {
status = "okay";
port {
#address-cells = <1>;
#size-cells = <0>;
csi_ep: endpoint {
remote-endpoint = <&ov5640_ep>;
bus-width = <8>;
......
......@@ -36,7 +36,7 @@ &emac {
pinctrl-0 = <&emac_rgmii_pins>;
phy-supply = <&reg_gmac_3v3>;
phy-handle = <&ext_rgmii_phy>;
phy-mode = "rgmii";
phy-mode = "rgmii-id";
/delete-property/ allwinner,leds-active-low;
status = "okay";
};
......
......@@ -123,7 +123,7 @@ &emac {
pinctrl-0 = <&emac_rgmii_pins>;
phy-supply = <&reg_gmac_3v3>;
phy-handle = <&ext_rgmii_phy>;
phy-mode = "rgmii";
phy-mode = "rgmii-id";
status = "okay";
};
......
......@@ -124,7 +124,7 @@ &emac {
pinctrl-0 = <&emac_rgmii_pins>;
phy-supply = <&reg_gmac_3v3>;
phy-handle = <&ext_rgmii_phy>;
phy-mode = "rgmii";
phy-mode = "rgmii-id";
status = "okay";
};
......
......@@ -97,7 +97,7 @@ &ehci0 {
&emac {
pinctrl-names = "default";
pinctrl-0 = <&ext_rgmii_pins>;
phy-mode = "rgmii";
phy-mode = "rgmii-id";
phy-handle = <&ext_rgmii_phy>;
phy-supply = <&reg_aldo2>;
status = "okay";
......
......@@ -100,7 +100,7 @@ &ehci3 {
&emac {
pinctrl-names = "default";
pinctrl-0 = <&ext_rgmii_pins>;
phy-mode = "rgmii";
phy-mode = "rgmii-id";
phy-handle = <&ext_rgmii_phy>;
phy-supply = <&reg_gmac_3v3>;
allwinner,rx-delay-ps = <200>;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment