Commit b5893a08 authored by Ben Dooks's avatar Ben Dooks Committed by David S. Miller

sh_eth: ensure pm_runtime cannot suspend the device during init

The pm_rumtime work queue is causing the device to be suspended during
initialisation, thus the initialisation may not be able to access registers
properly. As the code is called from a work queue, it is possible that this
is not seen from certain configurations/builds due to the asynchronos
nature of the code.

Another issue has also been found where the network device registration
calls back into the driver thus causing further pm_runtime calls that
also caused issues with the MDIO bus code. This has now been checked
and is the only place the MDIO can be called without the device open.

Use pm_runtime_get_sync() and pm_runtime_put() to ensure that the
pm system does not suspend it during the probe() call and remove the
now unnecessary pm_runtime_resume() call. Also add a call in the error
path to call pm_runtime_disable().

This fixes the external abort that can cause /sbin/init or other such
init processed to die.
Signed-off-by: default avatarBen Dooks <ben.dooks@codethink.co.uk>
Tested-by: default avatarGeert Uytterhoeven <geert@linux-m68k.org>
Acked-by: default avatarLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 801d233b
......@@ -2772,6 +2772,9 @@ static int sh_eth_drv_probe(struct platform_device *pdev)
if (!ndev)
return -ENOMEM;
pm_runtime_enable(&pdev->dev);
pm_runtime_get_sync(&pdev->dev);
/* The sh Ether-specific entries in the device structure. */
ndev->base_addr = res->start;
devno = pdev->id;
......@@ -2799,8 +2802,6 @@ static int sh_eth_drv_probe(struct platform_device *pdev)
spin_lock_init(&mdp->lock);
mdp->pdev = pdev;
pm_runtime_enable(&pdev->dev);
pm_runtime_resume(&pdev->dev);
if (pdev->dev.of_node)
pd = sh_eth_parse_dt(&pdev->dev);
......@@ -2898,6 +2899,7 @@ static int sh_eth_drv_probe(struct platform_device *pdev)
netdev_info(ndev, "Base address at 0x%x, %pM, IRQ %d.\n",
(u32)ndev->base_addr, ndev->dev_addr, ndev->irq);
pm_runtime_put(&pdev->dev);
platform_set_drvdata(pdev, ndev);
return ret;
......@@ -2911,6 +2913,8 @@ static int sh_eth_drv_probe(struct platform_device *pdev)
if (ndev)
free_netdev(ndev);
pm_runtime_put(&pdev->dev);
pm_runtime_disable(&pdev->dev);
return ret;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment