Commit b59415c2 authored by Jes Sorensen's avatar Jes Sorensen Committed by Kalle Valo

rtl8xxxu: Split filling of TX descriptors into separate functions

Split the filling of TX descriptors into a generic portion used on all
devices, and format specific helper functions provided in the fops
structure.

This also cleaned up some mess, even if non harmful, in the handling
of txdesc40 descriptors, where the code randomly would switch between
the pointer to tx_desc and tx_desc40.
Signed-off-by: default avatarJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: default avatarKalle Valo <kvalo@codeaurora.org>
parent 99afaac4
......@@ -1336,6 +1336,10 @@ struct rtl8xxxu_fileops {
u32 ramask, int sgi);
void (*report_connect) (struct rtl8xxxu_priv *priv,
u8 macid, bool connect);
void (*fill_txdesc) (struct ieee80211_hdr *hdr,
struct rtl8xxxu_txdesc32 *tx_desc, u32 rate,
u16 rate_flag, bool sgi, bool short_preamble,
bool ampdu_enable);
int writeN_block_size;
int rx_agg_buf_size;
char tx_desc_size;
......@@ -1429,6 +1433,14 @@ int rtl8xxxu_parse_rxdesc24(struct rtl8xxxu_priv *priv, struct sk_buff *skb);
int rtl8xxxu_gen2_channel_to_group(int channel);
bool rtl8xxxu_gen2_simularity_compare(struct rtl8xxxu_priv *priv,
int result[][8], int c1, int c2);
void rtl8xxxu_fill_txdesc_v1(struct ieee80211_hdr *hdr,
struct rtl8xxxu_txdesc32 *tx_desc, u32 rate,
u16 rate_flag, bool sgi, bool short_preamble,
bool ampdu_enable);
void rtl8xxxu_fill_txdesc_v2(struct ieee80211_hdr *hdr,
struct rtl8xxxu_txdesc32 *tx_desc32, u32 rate,
u16 rate_flag, bool sgi, bool short_preamble,
bool ampdu_enable);
extern struct rtl8xxxu_fileops rtl8192cu_fops;
extern struct rtl8xxxu_fileops rtl8192eu_fops;
......
......@@ -567,6 +567,7 @@ struct rtl8xxxu_fileops rtl8192cu_fops = {
.set_tx_power = rtl8xxxu_gen1_set_tx_power,
.update_rate_mask = rtl8xxxu_update_rate_mask,
.report_connect = rtl8xxxu_gen1_report_connect,
.fill_txdesc = rtl8xxxu_fill_txdesc_v1,
.writeN_block_size = 128,
.rx_agg_buf_size = 16000,
.tx_desc_size = sizeof(struct rtl8xxxu_txdesc32),
......
......@@ -1501,6 +1501,7 @@ struct rtl8xxxu_fileops rtl8192eu_fops = {
.set_tx_power = rtl8192e_set_tx_power,
.update_rate_mask = rtl8xxxu_gen2_update_rate_mask,
.report_connect = rtl8xxxu_gen2_report_connect,
.fill_txdesc = rtl8xxxu_fill_txdesc_v2,
.writeN_block_size = 128,
.tx_desc_size = sizeof(struct rtl8xxxu_txdesc40),
.rx_desc_size = sizeof(struct rtl8xxxu_rxdesc24),
......
......@@ -384,6 +384,7 @@ struct rtl8xxxu_fileops rtl8723au_fops = {
.set_tx_power = rtl8xxxu_gen1_set_tx_power,
.update_rate_mask = rtl8xxxu_update_rate_mask,
.report_connect = rtl8xxxu_gen1_report_connect,
.fill_txdesc = rtl8xxxu_fill_txdesc_v1,
.writeN_block_size = 1024,
.rx_agg_buf_size = 16000,
.tx_desc_size = sizeof(struct rtl8xxxu_txdesc32),
......
......@@ -1662,6 +1662,7 @@ struct rtl8xxxu_fileops rtl8723bu_fops = {
.set_tx_power = rtl8723b_set_tx_power,
.update_rate_mask = rtl8xxxu_gen2_update_rate_mask,
.report_connect = rtl8xxxu_gen2_report_connect,
.fill_txdesc = rtl8xxxu_fill_txdesc_v2,
.writeN_block_size = 1024,
.tx_desc_size = sizeof(struct rtl8xxxu_txdesc40),
.rx_desc_size = sizeof(struct rtl8xxxu_rxdesc24),
......
......@@ -4750,6 +4750,113 @@ static void rtl8xxxu_dump_action(struct device *dev,
}
}
/*
* Fill in v1 (gen1) specific TX descriptor bits.
* This format is used on 8188cu/8192cu/8723au
*/
void
rtl8xxxu_fill_txdesc_v1(struct ieee80211_hdr *hdr,
struct rtl8xxxu_txdesc32 *tx_desc, u32 rate,
u16 rate_flag, bool sgi, bool short_preamble,
bool ampdu_enable)
{
u16 seq_number;
seq_number = IEEE80211_SEQ_TO_SN(le16_to_cpu(hdr->seq_ctrl));
tx_desc->txdw5 = cpu_to_le32(rate);
if (ieee80211_is_data(hdr->frame_control))
tx_desc->txdw5 |= cpu_to_le32(0x0001ff00);
tx_desc->txdw3 = cpu_to_le32((u32)seq_number << TXDESC32_SEQ_SHIFT);
if (ampdu_enable)
tx_desc->txdw1 |= cpu_to_le32(TXDESC32_AGG_ENABLE);
else
tx_desc->txdw1 |= cpu_to_le32(TXDESC32_AGG_BREAK);
if (ieee80211_is_mgmt(hdr->frame_control)) {
tx_desc->txdw5 = cpu_to_le32(rate);
tx_desc->txdw4 |= cpu_to_le32(TXDESC32_USE_DRIVER_RATE);
tx_desc->txdw5 |= cpu_to_le32(6 << TXDESC32_RETRY_LIMIT_SHIFT);
tx_desc->txdw5 |= cpu_to_le32(TXDESC32_RETRY_LIMIT_ENABLE);
}
if (ieee80211_is_data_qos(hdr->frame_control))
tx_desc->txdw4 |= cpu_to_le32(TXDESC32_QOS);
if (short_preamble)
tx_desc->txdw4 |= cpu_to_le32(TXDESC32_SHORT_PREAMBLE);
if (sgi)
tx_desc->txdw5 |= cpu_to_le32(TXDESC32_SHORT_GI);
if (rate_flag & IEEE80211_TX_RC_USE_RTS_CTS) {
/*
* Use RTS rate 24M - does the mac80211 tell
* us which to use?
*/
tx_desc->txdw4 |= cpu_to_le32(DESC_RATE_24M <<
TXDESC32_RTS_RATE_SHIFT);
tx_desc->txdw4 |= cpu_to_le32(TXDESC32_RTS_CTS_ENABLE);
tx_desc->txdw4 |= cpu_to_le32(TXDESC32_HW_RTS_ENABLE);
}
}
/*
* Fill in v2 (gen2) specific TX descriptor bits.
* This format is used on 8192eu/8723bu
*/
void
rtl8xxxu_fill_txdesc_v2(struct ieee80211_hdr *hdr,
struct rtl8xxxu_txdesc32 *tx_desc32, u32 rate,
u16 rate_flag, bool sgi, bool short_preamble,
bool ampdu_enable)
{
struct rtl8xxxu_txdesc40 *tx_desc40;
u16 seq_number;
tx_desc40 = (struct rtl8xxxu_txdesc40 *)tx_desc32;
seq_number = IEEE80211_SEQ_TO_SN(le16_to_cpu(hdr->seq_ctrl));
tx_desc40->txdw4 = cpu_to_le32(rate);
if (ieee80211_is_data(hdr->frame_control)) {
tx_desc40->txdw4 |= cpu_to_le32(0x1f <<
TXDESC40_DATA_RATE_FB_SHIFT);
}
tx_desc40->txdw9 = cpu_to_le32((u32)seq_number << TXDESC40_SEQ_SHIFT);
if (ampdu_enable)
tx_desc40->txdw2 |= cpu_to_le32(TXDESC40_AGG_ENABLE);
else
tx_desc40->txdw2 |= cpu_to_le32(TXDESC40_AGG_BREAK);
if (ieee80211_is_mgmt(hdr->frame_control)) {
tx_desc40->txdw4 = cpu_to_le32(rate);
tx_desc40->txdw3 |= cpu_to_le32(TXDESC40_USE_DRIVER_RATE);
tx_desc40->txdw4 |=
cpu_to_le32(6 << TXDESC40_RETRY_LIMIT_SHIFT);
tx_desc40->txdw4 |= cpu_to_le32(TXDESC40_RETRY_LIMIT_ENABLE);
}
if (short_preamble)
tx_desc40->txdw5 |= cpu_to_le32(TXDESC40_SHORT_PREAMBLE);
if (rate_flag & IEEE80211_TX_RC_USE_RTS_CTS) {
/*
* Use RTS rate 24M - does the mac80211 tell
* us which to use?
*/
tx_desc40->txdw4 |= cpu_to_le32(DESC_RATE_24M <<
TXDESC40_RTS_RATE_SHIFT);
tx_desc40->txdw3 |= cpu_to_le32(TXDESC40_RTS_CTS_ENABLE);
tx_desc40->txdw3 |= cpu_to_le32(TXDESC40_HW_RTS_ENABLE);
}
}
static void rtl8xxxu_tx(struct ieee80211_hw *hw,
struct ieee80211_tx_control *control,
struct sk_buff *skb)
......@@ -4759,7 +4866,6 @@ static void rtl8xxxu_tx(struct ieee80211_hw *hw,
struct ieee80211_rate *tx_rate = ieee80211_get_tx_rate(hw, tx_info);
struct rtl8xxxu_priv *priv = hw->priv;
struct rtl8xxxu_txdesc32 *tx_desc;
struct rtl8xxxu_txdesc40 *tx_desc40;
struct rtl8xxxu_tx_urb *tx_urb;
struct ieee80211_sta *sta = NULL;
struct ieee80211_vif *vif = tx_info->control.vif;
......@@ -4865,95 +4971,9 @@ static void rtl8xxxu_tx(struct ieee80211_hw *hw,
short_preamble = true;
seq_number = IEEE80211_SEQ_TO_SN(le16_to_cpu(hdr->seq_ctrl));
if (!usedesc40) {
tx_desc->txdw5 = cpu_to_le32(rate);
if (ieee80211_is_data(hdr->frame_control))
tx_desc->txdw5 |= cpu_to_le32(0x0001ff00);
tx_desc->txdw3 =
cpu_to_le32((u32)seq_number << TXDESC32_SEQ_SHIFT);
if (ampdu_enable)
tx_desc->txdw1 |= cpu_to_le32(TXDESC32_AGG_ENABLE);
else
tx_desc->txdw1 |= cpu_to_le32(TXDESC32_AGG_BREAK);
if (ieee80211_is_mgmt(hdr->frame_control)) {
tx_desc->txdw5 = cpu_to_le32(rate);
tx_desc->txdw4 |=
cpu_to_le32(TXDESC32_USE_DRIVER_RATE);
tx_desc->txdw5 |=
cpu_to_le32(6 << TXDESC32_RETRY_LIMIT_SHIFT);
tx_desc->txdw5 |=
cpu_to_le32(TXDESC32_RETRY_LIMIT_ENABLE);
}
if (ieee80211_is_data_qos(hdr->frame_control))
tx_desc->txdw4 |= cpu_to_le32(TXDESC32_QOS);
if (short_preamble)
tx_desc->txdw4 |= cpu_to_le32(TXDESC32_SHORT_PREAMBLE);
if (sgi)
tx_desc->txdw5 |= cpu_to_le32(TXDESC32_SHORT_GI);
if (rate_flag & IEEE80211_TX_RC_USE_RTS_CTS) {
/*
* Use RTS rate 24M - does the mac80211 tell
* us which to use?
*/
tx_desc->txdw4 |=
cpu_to_le32(DESC_RATE_24M <<
TXDESC32_RTS_RATE_SHIFT);
tx_desc->txdw4 |=
cpu_to_le32(TXDESC32_RTS_CTS_ENABLE);
tx_desc->txdw4 |= cpu_to_le32(TXDESC32_HW_RTS_ENABLE);
}
} else {
tx_desc40 = (struct rtl8xxxu_txdesc40 *)tx_desc;
tx_desc40->txdw4 = cpu_to_le32(rate);
if (ieee80211_is_data(hdr->frame_control)) {
tx_desc->txdw4 |=
cpu_to_le32(0x1f <<
TXDESC40_DATA_RATE_FB_SHIFT);
}
tx_desc40->txdw9 =
cpu_to_le32((u32)seq_number << TXDESC40_SEQ_SHIFT);
if (ampdu_enable)
tx_desc40->txdw2 |= cpu_to_le32(TXDESC40_AGG_ENABLE);
else
tx_desc40->txdw2 |= cpu_to_le32(TXDESC40_AGG_BREAK);
if (ieee80211_is_mgmt(hdr->frame_control)) {
tx_desc40->txdw4 = cpu_to_le32(rate);
tx_desc40->txdw3 |=
cpu_to_le32(TXDESC40_USE_DRIVER_RATE);
tx_desc40->txdw4 |=
cpu_to_le32(6 << TXDESC40_RETRY_LIMIT_SHIFT);
tx_desc40->txdw4 |=
cpu_to_le32(TXDESC40_RETRY_LIMIT_ENABLE);
}
if (short_preamble)
tx_desc40->txdw5 |=
cpu_to_le32(TXDESC40_SHORT_PREAMBLE);
if (rate_flag & IEEE80211_TX_RC_USE_RTS_CTS) {
/*
* Use RTS rate 24M - does the mac80211 tell
* us which to use?
*/
tx_desc->txdw4 |=
cpu_to_le32(DESC_RATE_24M <<
TXDESC40_RTS_RATE_SHIFT);
tx_desc->txdw3 |= cpu_to_le32(TXDESC40_RTS_CTS_ENABLE);
tx_desc->txdw3 |= cpu_to_le32(TXDESC40_HW_RTS_ENABLE);
}
}
priv->fops->fill_txdesc(hdr, tx_desc, rate, rate_flag,
sgi, short_preamble, ampdu_enable);
rtl8xxxu_calc_tx_desc_csum(tx_desc);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment