Commit b5bf9068 authored by Eilon Greenstein's avatar Eilon Greenstein Committed by David S. Miller

bnx2x: Loopback in diag mode

When loading in diag mode, set the device to loopback instead of normal link and
then changing it to loopback mode
Signed-off-by: default avatarEilon Greenstein <eilong@broadcom.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 26e02975
......@@ -1062,10 +1062,10 @@ static inline u32 reg_poll(struct bnx2x *bp, u32 reg, u32 expected, int ms,
#define BNX2X_NUM_TESTS 7
#define BNX2X_MAC_LOOPBACK 0
#define BNX2X_PHY_LOOPBACK 1
#define BNX2X_MAC_LOOPBACK_FAILED 1
#define BNX2X_PHY_LOOPBACK_FAILED 2
#define BNX2X_PHY_LOOPBACK 0
#define BNX2X_MAC_LOOPBACK 1
#define BNX2X_PHY_LOOPBACK_FAILED 1
#define BNX2X_MAC_LOOPBACK_FAILED 2
#define BNX2X_LOOPBACK_FAILED (BNX2X_MAC_LOOPBACK_FAILED | \
BNX2X_PHY_LOOPBACK_FAILED)
......
......@@ -2064,7 +2064,7 @@ static void bnx2x_link_report(struct bnx2x *bp)
}
}
static u8 bnx2x_initial_phy_init(struct bnx2x *bp)
static u8 bnx2x_initial_phy_init(struct bnx2x *bp, int load_mode)
{
if (!BP_NOMCP(bp)) {
u8 rc;
......@@ -2080,14 +2080,20 @@ static u8 bnx2x_initial_phy_init(struct bnx2x *bp)
bp->link_params.req_fc_auto_adv = BNX2X_FLOW_CTRL_BOTH;
bnx2x_acquire_phy_lock(bp);
if (load_mode == LOAD_DIAG)
bp->link_params.loopback_mode = LOOPBACK_XGXS_10;
rc = bnx2x_phy_init(&bp->link_params, &bp->link_vars);
bnx2x_release_phy_lock(bp);
bnx2x_calc_fc_adv(bp);
if (bp->link_vars.link_up)
if (CHIP_REV_IS_SLOW(bp) && bp->link_vars.link_up) {
bnx2x_stats_handle(bp, STATS_EVENT_LINK_UP);
bnx2x_link_report(bp);
}
return rc;
}
......@@ -6942,7 +6948,7 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
bnx2x_set_mac_addr_e1h(bp, 1);
if (bp->port.pmf)
bnx2x_initial_phy_init(bp);
bnx2x_initial_phy_init(bp, load_mode);
/* Start fast path */
switch (load_mode) {
......@@ -9328,23 +9334,23 @@ static int bnx2x_run_loopback(struct bnx2x *bp, int loopback_mode, u8 link_up)
u16 len;
int rc = -ENODEV;
if (loopback_mode == BNX2X_MAC_LOOPBACK) {
/* check the loopback mode */
switch (loopback_mode) {
case BNX2X_PHY_LOOPBACK:
if (bp->link_params.loopback_mode != LOOPBACK_XGXS_10)
return -EINVAL;
break;
case BNX2X_MAC_LOOPBACK:
bp->link_params.loopback_mode = LOOPBACK_BMAC;
bnx2x_phy_init(&bp->link_params, &bp->link_vars);
} else if (loopback_mode == BNX2X_PHY_LOOPBACK) {
u16 cnt = 1000;
bp->link_params.loopback_mode = LOOPBACK_XGXS_10;
bnx2x_phy_init(&bp->link_params, &bp->link_vars);
/* wait until link state is restored */
if (link_up)
while (cnt-- && bnx2x_test_link(&bp->link_params,
&bp->link_vars))
msleep(10);
} else
break;
default:
return -EINVAL;
}
pkt_size = 1514;
/* prepare the loopback packet */
pkt_size = (((bp->dev->mtu < ETH_MAX_PACKET_SIZE) ?
bp->dev->mtu : ETH_MAX_PACKET_SIZE) + ETH_HLEN);
skb = netdev_alloc_skb(bp->dev, bp->rx_buf_size);
if (!skb) {
rc = -ENOMEM;
......@@ -9356,6 +9362,7 @@ static int bnx2x_run_loopback(struct bnx2x *bp, int loopback_mode, u8 link_up)
for (i = ETH_HLEN; i < pkt_size; i++)
packet[i] = (unsigned char) (i & 0xff);
/* send the loopback packet */
num_pkts = 0;
tx_start_idx = le16_to_cpu(*fp->tx_cons_sb);
rx_start_idx = le16_to_cpu(*fp->rx_cons_sb);
......@@ -9440,7 +9447,7 @@ static int bnx2x_run_loopback(struct bnx2x *bp, int loopback_mode, u8 link_up)
static int bnx2x_test_loopback(struct bnx2x *bp, u8 link_up)
{
int rc = 0;
int rc = 0, res;
if (!netif_running(bp->dev))
return BNX2X_LOOPBACK_FAILED;
......@@ -9448,14 +9455,16 @@ static int bnx2x_test_loopback(struct bnx2x *bp, u8 link_up)
bnx2x_netif_stop(bp, 1);
bnx2x_acquire_phy_lock(bp);
if (bnx2x_run_loopback(bp, BNX2X_MAC_LOOPBACK, link_up)) {
DP(NETIF_MSG_PROBE, "MAC loopback failed\n");
rc |= BNX2X_MAC_LOOPBACK_FAILED;
res = bnx2x_run_loopback(bp, BNX2X_PHY_LOOPBACK, link_up);
if (res) {
DP(NETIF_MSG_PROBE, " PHY loopback failed (res %d)\n", res);
rc |= BNX2X_PHY_LOOPBACK_FAILED;
}
if (bnx2x_run_loopback(bp, BNX2X_PHY_LOOPBACK, link_up)) {
DP(NETIF_MSG_PROBE, "PHY loopback failed\n");
rc |= BNX2X_PHY_LOOPBACK_FAILED;
res = bnx2x_run_loopback(bp, BNX2X_MAC_LOOPBACK, link_up);
if (res) {
DP(NETIF_MSG_PROBE, " MAC loopback failed (res %d)\n", res);
rc |= BNX2X_MAC_LOOPBACK_FAILED;
}
bnx2x_release_phy_lock(bp);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment