phy: qcom-qmp-combo: use v6 registers in v6 regs layout

Make sure that we use only v6 registers in qmp_v6_usb3phy_regs_layout.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230928105445.1210861-4-dmitry.baryshkov@linaro.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

drivers/phy/qualcomm/phy-qcom-qmp-combo.c

@@ -194,14 +194,14 @@ static const unsigned int qmp_v5_5nm_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
 };
 
 static const unsigned int qmp_v6_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
-	[QPHY_SW_RESET]			= QPHY_V5_PCS_SW_RESET,
-	[QPHY_START_CTRL]		= QPHY_V5_PCS_START_CONTROL,
-	[QPHY_PCS_STATUS]		= QPHY_V5_PCS_PCS_STATUS1,
-	[QPHY_PCS_POWER_DOWN_CONTROL]	= QPHY_V5_PCS_POWER_DOWN_CONTROL,
+	[QPHY_SW_RESET]			= QPHY_V6_PCS_SW_RESET,
+	[QPHY_START_CTRL]		= QPHY_V6_PCS_START_CONTROL,
+	[QPHY_PCS_STATUS]		= QPHY_V6_PCS_PCS_STATUS1,
+	[QPHY_PCS_POWER_DOWN_CONTROL]	= QPHY_V6_PCS_POWER_DOWN_CONTROL,
 
 	/* In PCS_USB */
-	[QPHY_PCS_AUTONOMOUS_MODE_CTRL]	= QPHY_V5_PCS_USB3_AUTONOMOUS_MODE_CTRL,
-	[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = QPHY_V5_PCS_USB3_LFPS_RXTERM_IRQ_CLEAR,
+	[QPHY_PCS_AUTONOMOUS_MODE_CTRL]	= QPHY_V6_PCS_USB3_AUTONOMOUS_MODE_CTRL,
+	[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = QPHY_V6_PCS_USB3_LFPS_RXTERM_IRQ_CLEAR,
 
 	[QPHY_COM_RESETSM_CNTRL]	= QSERDES_V6_COM_RESETSM_CNTRL,
 	[QPHY_COM_C_READY_STATUS]	= QSERDES_V6_COM_C_READY_STATUS,

drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v6.h

@@ -6,8 +6,9 @@
 #ifndef QCOM_PHY_QMP_PCS_USB_V6_H_
 #define QCOM_PHY_QMP_PCS_USB_V6_H_
 
-/* Only for QMP V6 PHY - USB3 have different offsets than V5 */
 #define QPHY_V6_PCS_USB3_POWER_STATE_CONFIG1		0x00
+#define QPHY_V6_PCS_USB3_AUTONOMOUS_MODE_CTRL		0x08
+#define QPHY_V6_PCS_USB3_LFPS_RXTERM_IRQ_CLEAR		0x14
 #define QPHY_V6_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL	0x18
 #define QPHY_V6_PCS_USB3_RXEQTRAINING_DFE_TIME_S2	0x3c
 #define QPHY_V6_PCS_USB3_RCVR_DTCT_DLY_U3_L		0x40

drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6.h

@@ -7,6 +7,10 @@
 #define QCOM_PHY_QMP_PCS_V6_H_
 
 /* Only for QMP V6 PHY - USB/PCIe PCS registers */
+#define QPHY_V6_PCS_SW_RESET			0x000
+#define QPHY_V6_PCS_PCS_STATUS1			0x014
+#define QPHY_V6_PCS_POWER_DOWN_CONTROL		0x040
+#define QPHY_V6_PCS_START_CONTROL		0x044
 #define QPHY_V6_PCS_POWER_STATE_CONFIG1		0x090
 #define QPHY_V6_PCS_LOCK_DETECT_CONFIG1		0x0c4
 #define QPHY_V6_PCS_LOCK_DETECT_CONFIG2		0x0c8