Commit b61753a4 authored by Andy Yan's avatar Andy Yan Committed by Heiko Stuebner

dt-bindings: rk1108-cru: rename RK1108 to RV1108

Rockchip finally named the SOC as RV1108, so change it.
Signed-off-by: default avatarAndy Yan <andy.yan@rock-chips.com>
Acked-by: default avatarRob Herring <robh@kernel.org>
Signed-off-by: default avatarHeiko Stuebner <heiko@sntech.de>
parent 920c480a
* Rockchip RK1108 Clock and Reset Unit
* Rockchip RV1108 Clock and Reset Unit
The RK1108 clock controller generates and supplies clock to various
The RV1108 clock controller generates and supplies clock to various
controllers within the SoC and also implements a reset controller for SoC
peripherals.
Required Properties:
- compatible: should be "rockchip,rk1108-cru"
- compatible: should be "rockchip,rv1108-cru"
- reg: physical base address of the controller and length of memory mapped
region.
- #clock-cells: should be 1.
......@@ -19,7 +19,7 @@ Optional Properties:
Each clock is assigned an identifier and client nodes can use this identifier
to specify the clock which they consume. All available clocks are defined as
preprocessor macros in the dt-bindings/clock/rk1108-cru.h headers and can be
preprocessor macros in the dt-bindings/clock/rv1108-cru.h headers and can be
used in device tree sources. Similar macros exist for the reset sources in
these files.
......@@ -38,7 +38,7 @@ clock-output-names:
Example: Clock controller node:
cru: cru@20200000 {
compatible = "rockchip,rk1108-cru";
compatible = "rockchip,rv1108-cru";
reg = <0x20200000 0x1000>;
rockchip,grf = <&grf>;
......@@ -50,7 +50,7 @@ Example: UART controller node that consumes the clock generated by the clock
controller:
uart0: serial@10230000 {
compatible = "rockchip,rk1108-uart", "snps,dw-apb-uart";
compatible = "rockchip,rv1108-uart", "snps,dw-apb-uart";
reg = <0x10230000 0x100>;
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment