arm64: zynqmp: Enable xlnx,zynqmp-dwc3 driver for xilinx boards

The commit 84770f02 ("usb: dwc3: Add driver for Xilinx platforms")
finally add proper support for Xilinx dwc3 driver. This patch is adding DT
description for it.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Michael Tretter <m.tretter@pengutronix.de>
Link: https://lore.kernel.org/r/640a3bc0dc3e32560d3e84c2f78b5ae561396eb0.1628244703.git.michal.simek@xilinx.com

arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts

@@ -27,6 +27,7 @@ aliases {
 		rtc0 = &rtc;
 		serial0 = &uart0;
 		spi0 = &qspi;
+		usb0 = &usb0;
 	};
 
 	chosen {
@@ -404,9 +405,14 @@ &usb0 {
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usb0_default>;
-	dr_mode = "host";
 	phy-names = "usb3-phy";
 	phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
+};
+
+&dwc3_0 {
+	status = "okay";
+	dr_mode = "host";
+	snps,usb3_lpm_capable;
 	maximum-speed = "super-speed";
 };
 

arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts

@@ -26,6 +26,7 @@ aliases {
 		serial1 = &uart1;
 		spi0 = &spi0;
 		spi1 = &spi1;
+		usb0 = &usb1;
 	};
 
 	chosen {
@@ -479,7 +480,13 @@ &usb1 {
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usb1_default>;
+};
+
+&dwc3_1 {
+	status = "okay";
 	dr_mode = "host";
+	snps,usb3_lpm_capable;
+	maximum-speed = "super-speed";
 };
 
 &uart0 {

arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts

@@ -24,6 +24,8 @@ aliases {
 		rtc0 = &rtc;
 		serial0 = &uart0;
 		serial1 = &uart1;
+		usb0 = &usb0;
+		usb1 = &usb1;
 	};
 
 	chosen {
@@ -147,11 +149,23 @@ &uart1 {
 
 &usb0 {
 	status = "okay";
+};
+
+&dwc3_0 {
+	status = "okay";
 	dr_mode = "host";
+	snps,usb3_lpm_capable;
+	maximum-speed = "super-speed";
 };
 
 /* ULPI SMSC USB3320 */
 &usb1 {
 	status = "okay";
+};
+
+&dwc3_1 {
+	status = "okay";
 	dr_mode = "host";
+	snps,usb3_lpm_capable;
+	maximum-speed = "super-speed";
 };

arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts

@@ -30,6 +30,8 @@ aliases {
 		serial2 = &dcc;
 		spi0 = &spi0;
 		spi1 = &spi1;
+		usb0 = &usb0;
+		usb1 = &usb1;
 		mmc0 = &sdhci0;
 		mmc1 = &sdhci1;
 	};
@@ -537,9 +539,13 @@ &usb0 {
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usb0_default>;
-	dr_mode = "peripheral";
 	phy-names = "usb3-phy";
 	phys = <&psgtr 2 PHY_TYPE_USB3 0 0>;
+};
+
+&dwc3_0 {
+	status = "okay";
+	dr_mode = "peripheral";
 	maximum-speed = "super-speed";
 };
 
@@ -548,9 +554,13 @@ &usb1 {
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usb1_default>;
-	dr_mode = "host";
 	phy-names = "usb3-phy";
 	phys = <&psgtr 3 PHY_TYPE_USB3 1 0>;
+};
+
+&dwc3_1 {
+	status = "okay";
+	dr_mode = "host";
 	maximum-speed = "super-speed";
 };
 

arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts

@@ -31,6 +31,7 @@ aliases {
 		serial1 = &uart1;
 		serial2 = &dcc;
 		spi0 = &qspi;
+		usb0 = &usb0;
 	};
 
 	chosen {
@@ -997,9 +998,14 @@ &usb0 {
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usb0_default>;
-	dr_mode = "host";
 	phy-names = "usb3-phy";
 	phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
+};
+
+&dwc3_0 {
+	status = "okay";
+	dr_mode = "host";
+	snps,usb3_lpm_capable;
 	maximum-speed = "super-speed";
 };
 

arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts

@@ -29,6 +29,7 @@ aliases {
 		serial1 = &uart1;
 		serial2 = &dcc;
 		spi0 = &qspi;
+		usb0 = &usb0;
 	};
 
 	chosen {
@@ -481,9 +482,14 @@ &usb0 {
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usb0_default>;
-	dr_mode = "host";
 	phy-names = "usb3-phy";
 	phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
+};
+
+&dwc3_0 {
+	status = "okay";
+	dr_mode = "host";
+	snps,usb3_lpm_capable;
 	maximum-speed = "super-speed";
 };
 

arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts

@@ -29,6 +29,7 @@ aliases {
 		serial1 = &uart1;
 		serial2 = &dcc;
 		spi0 = &qspi;
+		usb0 = &usb0;
 	};
 
 	chosen {
@@ -493,9 +494,14 @@ &usb0 {
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usb0_default>;
-	dr_mode = "host";
 	phy-names = "usb3-phy";
 	phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
+};
+
+&dwc3_0 {
+	status = "okay";
+	dr_mode = "host";
+	snps,usb3_lpm_capable;
 	maximum-speed = "super-speed";
 };
 

arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts

@@ -31,6 +31,7 @@ aliases {
 		serial1 = &uart1;
 		serial2 = &dcc;
 		spi0 = &qspi;
+		usb0 = &usb0;
 	};
 
 	chosen {
@@ -990,9 +991,14 @@ &usb0 {
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usb0_default>;
-	dr_mode = "host";
 	phy-names = "usb3-phy";
 	phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
+};
+
+&dwc3_0 {
+	status = "okay";
+	dr_mode = "host";
+	snps,usb3_lpm_capable;
 	maximum-speed = "super-speed";
 };
 

arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts

@@ -30,6 +30,7 @@ aliases {
 		serial0 = &uart0;
 		serial1 = &dcc;
 		spi0 = &qspi;
+		usb0 = &usb0;
 	};
 
 	chosen {
@@ -827,9 +828,14 @@ &usb0 {
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usb0_default>;
-	dr_mode = "host";
 	phy-names = "usb3-phy";
 	phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
+};
+
+&dwc3_0 {
+	status = "okay";
+	dr_mode = "host";
+	snps,usb3_lpm_capable;
 	maximum-speed = "super-speed";
 };
 

arch/arm64/boot/dts/xilinx/zynqmp.dtsi

@@ -2,7 +2,7 @@
 /*
  * dts file for Xilinx ZynqMP
  *
- * (C) Copyright 2014 - 2019, Xilinx, Inc.
+ * (C) Copyright 2014 - 2021, Xilinx, Inc.
  *
  * Michal Simek <michal.simek@xilinx.com>
  *
@@ -805,24 +805,58 @@ uart1: serial@ff010000 {
 			power-domains = <&zynqmp_firmware PD_UART_1>;
 		};
 
-		usb0: usb@fe200000 {
-			compatible = "snps,dwc3";
+		usb0: usb@ff9d0000 {
+			#address-cells = <2>;
+			#size-cells = <2>;
 			status = "disabled";
-			interrupt-parent = <&gic>;
-			interrupts = <0 65 4>;
-			reg = <0x0 0xfe200000 0x0 0x40000>;
-			clock-names = "clk_xin", "clk_ahb";
+			compatible = "xlnx,zynqmp-dwc3";
+			reg = <0x0 0xff9d0000 0x0 0x100>;
+			clock-names = "bus_clk", "ref_clk";
 			power-domains = <&zynqmp_firmware PD_USB_0>;
-		};
+			resets = <&zynqmp_reset ZYNQMP_RESET_USB0_CORERESET>,
+				 <&zynqmp_reset ZYNQMP_RESET_USB0_HIBERRESET>,
+				 <&zynqmp_reset ZYNQMP_RESET_USB0_APB>;
+			reset-names = "usb_crst", "usb_hibrst", "usb_apbrst";
+			ranges;
 
-		usb1: usb@fe300000 {
+			dwc3_0: usb@fe200000 {
 				compatible = "snps,dwc3";
-			status = "disabled";
+				reg = <0x0 0xfe200000 0x0 0x40000>;
 				interrupt-parent = <&gic>;
-			interrupts = <0 70 4>;
-			reg = <0x0 0xfe300000 0x0 0x40000>;
-			clock-names = "clk_xin", "clk_ahb";
+				interrupt-names = "dwc_usb3", "otg";
+				interrupts = <0 65 4>, <0 69 4>;
+				#stream-id-cells = <1>;
+				iommus = <&smmu 0x860>;
+				snps,quirk-frame-length-adjustment = <0x20>;
+				/* dma-coherent; */
+			};
+		};
+
+		usb1: usb@ff9e0000 {
+			#address-cells = <2>;
+			#size-cells = <2>;
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dwc3";
+			reg = <0x0 0xff9e0000 0x0 0x100>;
+			clock-names = "bus_clk", "ref_clk";
 			power-domains = <&zynqmp_firmware PD_USB_1>;
+			resets = <&zynqmp_reset ZYNQMP_RESET_USB1_CORERESET>,
+				 <&zynqmp_reset ZYNQMP_RESET_USB1_HIBERRESET>,
+				 <&zynqmp_reset ZYNQMP_RESET_USB1_APB>;
+			reset-names = "usb_crst", "usb_hibrst", "usb_apbrst";
+			ranges;
+
+			dwc3_1: usb@fe300000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0xfe300000 0x0 0x40000>;
+				interrupt-parent = <&gic>;
+				interrupt-names = "dwc_usb3", "otg";
+				interrupts = <0 70 4>, <0 74 4>;
+				#stream-id-cells = <1>;
+				iommus = <&smmu 0x861>;
+				snps,quirk-frame-length-adjustment = <0x20>;
+				/* dma-coherent; */
+			};
 		};
 
 		watchdog0: watchdog@fd4d0000 {