Merge branch 'cpsw'

Mugunthan V N says:

====================
Add DRA7xx and AM43xx platform support in cpsw-phy-sel driver

Adding DRA7xx and AM43xx platform support to cpsw-phy-sel driver to select
phy mode in control driver and fixing the uninitialized dev by initializing
to platform device structure pointer.

Changes from Initial version
* Added back the missing patch (1/3)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation/devicetree/bindings/net/cpsw-phy-sel.txt

@@ -2,7 +2,9 @@ TI CPSW Phy mode Selection Device Tree Bindings
 -----------------------------------------------
 
 Required properties:
-- compatible		: Should be "ti,am3352-cpsw-phy-sel"
+- compatible		: Should be "ti,am3352-cpsw-phy-sel" for am335x platform and
+			  "ti,dra7xx-cpsw-phy-sel" for dra7xx platform
+			  "ti,am43xx-cpsw-phy-sel" for am43xx platform
 - reg			: physical base address and size of the cpsw
 			  registers map
 - reg-names		: names of the register map given in "reg" node

drivers/net/ethernet/ti/cpsw-phy-sel.c

@@ -29,6 +29,8 @@
 #define AM33XX_GMII_SEL_RMII2_IO_CLK_EN	BIT(7)
 #define AM33XX_GMII_SEL_RMII1_IO_CLK_EN	BIT(6)
 
+#define GMII_SEL_MODE_MASK		0x3
+
 struct cpsw_phy_sel_priv {
 	struct device	*dev;
 	u32 __iomem	*gmii_sel;
@@ -65,7 +67,7 @@ static void cpsw_gmii_sel_am3352(struct cpsw_phy_sel_priv *priv,
 		break;
 	};
 
-	mask = 0x3 << (slave * 2) | BIT(slave + 6);
+	mask = GMII_SEL_MODE_MASK << (slave * 2) | BIT(slave + 6);
 	mode <<= slave * 2;
 
 	if (priv->rmii_clock_external) {
@@ -81,6 +83,55 @@ static void cpsw_gmii_sel_am3352(struct cpsw_phy_sel_priv *priv,
 	writel(reg, priv->gmii_sel);
 }
 
+static void cpsw_gmii_sel_dra7xx(struct cpsw_phy_sel_priv *priv,
+				 phy_interface_t phy_mode, int slave)
+{
+	u32 reg;
+	u32 mask;
+	u32 mode = 0;
+
+	reg = readl(priv->gmii_sel);
+
+	switch (phy_mode) {
+	case PHY_INTERFACE_MODE_RMII:
+		mode = AM33XX_GMII_SEL_MODE_RMII;
+		break;
+
+	case PHY_INTERFACE_MODE_RGMII:
+	case PHY_INTERFACE_MODE_RGMII_ID:
+	case PHY_INTERFACE_MODE_RGMII_RXID:
+	case PHY_INTERFACE_MODE_RGMII_TXID:
+		mode = AM33XX_GMII_SEL_MODE_RGMII;
+		break;
+
+	case PHY_INTERFACE_MODE_MII:
+	default:
+		mode = AM33XX_GMII_SEL_MODE_MII;
+		break;
+	};
+
+	switch (slave) {
+	case 0:
+		mask = GMII_SEL_MODE_MASK;
+		break;
+	case 1:
+		mask = GMII_SEL_MODE_MASK << 4;
+		mode <<= 4;
+		break;
+	default:
+		dev_err(priv->dev, "invalid slave number...\n");
+		return;
+	}
+
+	if (priv->rmii_clock_external)
+		dev_err(priv->dev, "RMII External clock is not supported\n");
+
+	reg &= ~mask;
+	reg |= mode;
+
+	writel(reg, priv->gmii_sel);
+}
+
 static struct platform_driver cpsw_phy_sel_driver;
 static int match(struct device *dev, void *data)
 {
@@ -112,6 +163,14 @@ static const struct of_device_id cpsw_phy_sel_id_table[] = {
 		.compatible	= "ti,am3352-cpsw-phy-sel",
 		.data		= &cpsw_gmii_sel_am3352,
 	},
+	{
+		.compatible	= "ti,dra7xx-cpsw-phy-sel",
+		.data		= &cpsw_gmii_sel_dra7xx,
+	},
+	{
+		.compatible	= "ti,am43xx-cpsw-phy-sel",
+		.data		= &cpsw_gmii_sel_am3352,
+	},
 	{}
 };
 MODULE_DEVICE_TABLE(of, cpsw_phy_sel_id_table);
@@ -132,6 +191,7 @@ static int cpsw_phy_sel_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
+	priv->dev = &pdev->dev;
 	priv->cpsw_phy_sel = of_id->data;
 
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "gmii-sel");