Merge branch 'txgbe-phylink-support'

Jiawen Wu says:

====================
TXGBE PHYLINK support

Implement I2C, SFP, GPIO and PHYLINK to setup TXGBE link.

Because our I2C and PCS are based on Synopsys Designware IP-core, extend
the i2c-designware and pcs-xpcs driver to realize our functions.
====================

Link: https://lore.kernel.org/r/20230606092107.764621-1-jiawenwu@trustnetic.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

drivers/net/ethernet/wangxun/Kconfig

@@ -40,6 +40,16 @@ config NGBE
 config TXGBE
 	tristate "Wangxun(R) 10GbE PCI Express adapters support"
 	depends on PCI
+	depends on COMMON_CLK
+	select REGMAP
+	select I2C
+	select I2C_DESIGNWARE_PLATFORM
+	select PHYLINK
+	select HWMON if TXGBE=y
+	select SFP
+	select GPIOLIB
+	select GPIOLIB_IRQCHIP
+	select PCS_XPCS
 	select LIBWX
 	help
 	  This driver supports Wangxun(R) 10GbE PCI Express family of

drivers/net/ethernet/wangxun/libwx/wx_lib.c

@@ -2048,7 +2048,8 @@ void wx_free_irq(struct wx *wx)
 		free_irq(entry->vector, q_vector);
 	}
 
-	free_irq(wx->msix_entries[vector].vector, wx);
+	if (wx->mac.type == wx_mac_em)
+		free_irq(wx->msix_entries[vector].vector, wx);
 }
 EXPORT_SYMBOL(wx_free_irq);
 

drivers/net/ethernet/wangxun/libwx/wx_type.h

@@ -83,7 +83,9 @@
 #define WX_GPIO_INTMASK              0x14834
 #define WX_GPIO_INTTYPE_LEVEL        0x14838
 #define WX_GPIO_POLARITY             0x1483C
+#define WX_GPIO_INTSTATUS            0x14844
 #define WX_GPIO_EOI                  0x1484C
+#define WX_GPIO_EXT                  0x14850
 
 /*********************** Transmit DMA registers **************************/
 /* transmit global control */
@@ -814,6 +816,7 @@ enum wx_isb_idx {
 struct wx {
 	unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)];
 
+	void *priv;
 	u8 __iomem *hw_addr;
 	struct pci_dev *pdev;
 	struct net_device *netdev;
@@ -846,6 +849,7 @@ struct wx {
 	bool wol_enabled;
 	bool ncsi_enabled;
 	bool gpio_ctrl;
+	raw_spinlock_t gpio_lock;
 
 	/* Tx fast path data */
 	int num_tx_queues;

drivers/net/ethernet/wangxun/txgbe/Makefile

@@ -8,4 +8,5 @@ obj-$(CONFIG_TXGBE) += txgbe.o
 
 txgbe-objs := txgbe_main.o \
               txgbe_hw.o \
+              txgbe_phy.o \
               txgbe_ethtool.o

drivers/net/ethernet/wangxun/txgbe/txgbe_ethtool.c

@@ -6,11 +6,39 @@
 #include <linux/netdevice.h>
 
 #include "../libwx/wx_ethtool.h"
+#include "../libwx/wx_type.h"
+#include "txgbe_type.h"
 #include "txgbe_ethtool.h"
 
+static int txgbe_nway_reset(struct net_device *netdev)
+{
+	struct txgbe *txgbe = netdev_to_txgbe(netdev);
+
+	return phylink_ethtool_nway_reset(txgbe->phylink);
+}
+
+static int txgbe_get_link_ksettings(struct net_device *netdev,
+				    struct ethtool_link_ksettings *cmd)
+{
+	struct txgbe *txgbe = netdev_to_txgbe(netdev);
+
+	return phylink_ethtool_ksettings_get(txgbe->phylink, cmd);
+}
+
+static int txgbe_set_link_ksettings(struct net_device *netdev,
+				    const struct ethtool_link_ksettings *cmd)
+{
+	struct txgbe *txgbe = netdev_to_txgbe(netdev);
+
+	return phylink_ethtool_ksettings_set(txgbe->phylink, cmd);
+}
+
 static const struct ethtool_ops txgbe_ethtool_ops = {
 	.get_drvinfo		= wx_get_drvinfo,
+	.nway_reset		= txgbe_nway_reset,
 	.get_link		= ethtool_op_get_link,
+	.get_link_ksettings	= txgbe_get_link_ksettings,
+	.set_link_ksettings	= txgbe_set_link_ksettings,
 };
 
 void txgbe_set_ethtool_ops(struct net_device *netdev)

drivers/net/ethernet/wangxun/txgbe/txgbe_main.c

@@ -7,6 +7,7 @@
 #include <linux/netdevice.h>
 #include <linux/string.h>
 #include <linux/etherdevice.h>
+#include <linux/phylink.h>
 #include <net/ip.h>
 #include <linux/if_vlan.h>
 
@@ -15,6 +16,7 @@
 #include "../libwx/wx_hw.h"
 #include "txgbe_type.h"
 #include "txgbe_hw.h"
+#include "txgbe_phy.h"
 #include "txgbe_ethtool.h"
 
 char txgbe_driver_name[] = "txgbe";
@@ -81,6 +83,8 @@ static int txgbe_enumerate_functions(struct wx *wx)
  **/
 static void txgbe_irq_enable(struct wx *wx, bool queues)
 {
+	wr32(wx, WX_PX_MISC_IEN, TXGBE_PX_MISC_IEN_MASK);
+
 	/* unmask interrupt */
 	wx_intr_enable(wx, TXGBE_INTR_MISC(wx));
 	if (queues)
@@ -128,17 +132,6 @@ static irqreturn_t txgbe_intr(int __always_unused irq, void *data)
 	return IRQ_HANDLED;
 }
 
-static irqreturn_t txgbe_msix_other(int __always_unused irq, void *data)
-{
-	struct wx *wx = data;
-
-	/* re-enable the original interrupt state */
-	if (netif_running(wx->netdev))
-		txgbe_irq_enable(wx, false);
-
-	return IRQ_HANDLED;
-}
-
 /**
  * txgbe_request_msix_irqs - Initialize MSI-X interrupts
  * @wx: board private structure
@@ -170,13 +163,6 @@ static int txgbe_request_msix_irqs(struct wx *wx)
 		}
 	}
 
-	err = request_irq(wx->msix_entries[vector].vector,
-			  txgbe_msix_other, 0, netdev->name, wx);
-	if (err) {
-		wx_err(wx, "request_irq for msix_other failed: %d\n", err);
-		goto free_queue_irqs;
-	}
-
 	return 0;
 
 free_queue_irqs:
@@ -219,7 +205,8 @@ static int txgbe_request_irq(struct wx *wx)
 
 static void txgbe_up_complete(struct wx *wx)
 {
-	u32 reg;
+	struct net_device *netdev = wx->netdev;
+	struct txgbe *txgbe;
 
 	wx_control_hw(wx, true);
 	wx_configure_vectors(wx);
@@ -228,24 +215,17 @@ static void txgbe_up_complete(struct wx *wx)
 	smp_mb__before_atomic();
 	wx_napi_enable_all(wx);
 
+	txgbe = netdev_to_txgbe(netdev);
+	phylink_start(txgbe->phylink);
+
 	/* clear any pending interrupts, may auto mask */
 	rd32(wx, WX_PX_IC(0));
 	rd32(wx, WX_PX_IC(1));
 	rd32(wx, WX_PX_MISC_IC);
 	txgbe_irq_enable(wx, true);
 
-	/* Configure MAC Rx and Tx when link is up */
-	reg = rd32(wx, WX_MAC_RX_CFG);
-	wr32(wx, WX_MAC_RX_CFG, reg);
-	wr32(wx, WX_MAC_PKT_FLT, WX_MAC_PKT_FLT_PR);
-	reg = rd32(wx, WX_MAC_WDG_TIMEOUT);
-	wr32(wx, WX_MAC_WDG_TIMEOUT, reg);
-	reg = rd32(wx, WX_MAC_TX_CFG);
-	wr32(wx, WX_MAC_TX_CFG, (reg & ~WX_MAC_TX_CFG_SPEED_MASK) | WX_MAC_TX_CFG_SPEED_10G);
-
 	/* enable transmits */
-	netif_tx_start_all_queues(wx->netdev);
-	netif_carrier_on(wx->netdev);
+	netif_tx_start_all_queues(netdev);
 }
 
 static void txgbe_reset(struct wx *wx)
@@ -280,7 +260,6 @@ static void txgbe_disable_device(struct wx *wx)
 		wx_disable_rx_queue(wx, wx->rx_ring[i]);
 
 	netif_tx_stop_all_queues(netdev);
-	netif_carrier_off(netdev);
 	netif_tx_disable(netdev);
 
 	wx_irq_disable(wx);
@@ -311,8 +290,11 @@ static void txgbe_disable_device(struct wx *wx)
 
 static void txgbe_down(struct wx *wx)
 {
+	struct txgbe *txgbe = netdev_to_txgbe(wx->netdev);
+
 	txgbe_disable_device(wx);
 	txgbe_reset(wx);
+	phylink_stop(txgbe->phylink);
 
 	wx_clean_all_tx_rings(wx);
 	wx_clean_all_rx_rings(wx);
@@ -516,6 +498,7 @@ static int txgbe_probe(struct pci_dev *pdev,
 	struct net_device *netdev;
 	int err, expected_gts;
 	struct wx *wx = NULL;
+	struct txgbe *txgbe;
 
 	u16 eeprom_verh = 0, eeprom_verl = 0, offset = 0;
 	u16 eeprom_cfg_blkh = 0, eeprom_cfg_blkl = 0;
@@ -680,10 +663,23 @@ static int txgbe_probe(struct pci_dev *pdev,
 			 "0x%08x", etrack_id);
 	}
 
-	err = register_netdev(netdev);
+	txgbe = devm_kzalloc(&pdev->dev, sizeof(*txgbe), GFP_KERNEL);
+	if (!txgbe) {
+		err = -ENOMEM;
+		goto err_release_hw;
+	}
+
+	txgbe->wx = wx;
+	wx->priv = txgbe;
+
+	err = txgbe_init_phy(txgbe);
 	if (err)
 		goto err_release_hw;
 
+	err = register_netdev(netdev);
+	if (err)
+		goto err_remove_phy;
+
 	pci_set_drvdata(pdev, wx);
 
 	netif_tx_stop_all_queues(netdev);
@@ -711,6 +707,8 @@ static int txgbe_probe(struct pci_dev *pdev,
 
 	return 0;
 
+err_remove_phy:
+	txgbe_remove_phy(txgbe);
 err_release_hw:
 	wx_clear_interrupt_scheme(wx);
 	wx_control_hw(wx, false);
@@ -736,11 +734,14 @@ static int txgbe_probe(struct pci_dev *pdev,
 static void txgbe_remove(struct pci_dev *pdev)
 {
 	struct wx *wx = pci_get_drvdata(pdev);
+	struct txgbe *txgbe = wx->priv;
 	struct net_device *netdev;
 
 	netdev = wx->netdev;
 	unregister_netdev(netdev);
 
+	txgbe_remove_phy(txgbe);
+
 	pci_release_selected_regions(pdev,
 				     pci_select_bars(pdev, IORESOURCE_MEM));
 

drivers/net/ethernet/wangxun/txgbe/txgbe_phy.h

+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (c) 2015 - 2023 Beijing WangXun Technology Co., Ltd. */
+
+#ifndef _TXGBE_PHY_H_
+#define _TXGBE_PHY_H_
+
+int txgbe_init_phy(struct txgbe *txgbe);
+void txgbe_remove_phy(struct txgbe *txgbe);
+
+#endif /* _TXGBE_NODE_H_ */

drivers/net/ethernet/wangxun/txgbe/txgbe_type.h

@@ -4,6 +4,8 @@
 #ifndef _TXGBE_TYPE_H_
 #define _TXGBE_TYPE_H_
 
+#include <linux/property.h>
+
 /* Device IDs */
 #define TXGBE_DEV_ID_SP1000                     0x1001
 #define TXGBE_DEV_ID_WX1820                     0x2001
@@ -53,6 +55,39 @@
 #define TXGBE_TS_CTL                            0x10300
 #define TXGBE_TS_CTL_EVAL_MD                    BIT(31)
 
+/* GPIO register bit */
+#define TXGBE_GPIOBIT_0                         BIT(0) /* I:tx fault */
+#define TXGBE_GPIOBIT_1                         BIT(1) /* O:tx disabled */
+#define TXGBE_GPIOBIT_2                         BIT(2) /* I:sfp module absent */
+#define TXGBE_GPIOBIT_3                         BIT(3) /* I:rx signal lost */
+#define TXGBE_GPIOBIT_4                         BIT(4) /* O:rate select, 1G(0) 10G(1) */
+#define TXGBE_GPIOBIT_5                         BIT(5) /* O:rate select, 1G(0) 10G(1) */
+
+/* Extended Interrupt Enable Set */
+#define TXGBE_PX_MISC_ETH_LKDN                  BIT(8)
+#define TXGBE_PX_MISC_DEV_RST                   BIT(10)
+#define TXGBE_PX_MISC_ETH_EVENT                 BIT(17)
+#define TXGBE_PX_MISC_ETH_LK                    BIT(18)
+#define TXGBE_PX_MISC_ETH_AN                    BIT(19)
+#define TXGBE_PX_MISC_INT_ERR                   BIT(20)
+#define TXGBE_PX_MISC_GPIO                      BIT(26)
+#define TXGBE_PX_MISC_IEN_MASK                            \
+	(TXGBE_PX_MISC_ETH_LKDN | TXGBE_PX_MISC_DEV_RST | \
+	 TXGBE_PX_MISC_ETH_EVENT | TXGBE_PX_MISC_ETH_LK | \
+	 TXGBE_PX_MISC_ETH_AN | TXGBE_PX_MISC_INT_ERR |   \
+	 TXGBE_PX_MISC_GPIO)
+
+/* Port cfg registers */
+#define TXGBE_CFG_PORT_ST                       0x14404
+#define TXGBE_CFG_PORT_ST_LINK_UP               BIT(0)
+
+/* I2C registers */
+#define TXGBE_I2C_BASE                          0x14900
+
+/************************************** ETH PHY ******************************/
+#define TXGBE_XPCS_IDA_ADDR                     0x13000
+#define TXGBE_XPCS_IDA_DATA                     0x13004
+
 /* Part Number String Length */
 #define TXGBE_PBANUM_LENGTH                     32
 
@@ -100,4 +135,58 @@
 
 extern char txgbe_driver_name[];
 
+static inline struct txgbe *netdev_to_txgbe(struct net_device *netdev)
+{
+	struct wx *wx = netdev_priv(netdev);
+
+	return wx->priv;
+}
+
+#define NODE_PROP(_NAME, _PROP)			\
+	(const struct software_node) {		\
+		.name = _NAME,			\
+		.properties = _PROP,		\
+	}
+
+enum txgbe_swnodes {
+	SWNODE_GPIO = 0,
+	SWNODE_I2C,
+	SWNODE_SFP,
+	SWNODE_PHYLINK,
+	SWNODE_MAX
+};
+
+struct txgbe_nodes {
+	char gpio_name[32];
+	char i2c_name[32];
+	char sfp_name[32];
+	char phylink_name[32];
+	struct property_entry gpio_props[1];
+	struct property_entry i2c_props[3];
+	struct property_entry sfp_props[8];
+	struct property_entry phylink_props[2];
+	struct software_node_ref_args i2c_ref[1];
+	struct software_node_ref_args gpio0_ref[1];
+	struct software_node_ref_args gpio1_ref[1];
+	struct software_node_ref_args gpio2_ref[1];
+	struct software_node_ref_args gpio3_ref[1];
+	struct software_node_ref_args gpio4_ref[1];
+	struct software_node_ref_args gpio5_ref[1];
+	struct software_node_ref_args sfp_ref[1];
+	struct software_node swnodes[SWNODE_MAX];
+	const struct software_node *group[SWNODE_MAX + 1];
+};
+
+struct txgbe {
+	struct wx *wx;
+	struct txgbe_nodes nodes;
+	struct dw_xpcs *xpcs;
+	struct phylink *phylink;
+	struct platform_device *sfp_dev;
+	struct platform_device *i2c_dev;
+	struct clk_lookup *clock;
+	struct clk *clk;
+	struct gpio_chip *gpio;
+};
+
 #endif /* _TXGBE_TYPE_H_ */

drivers/net/pcs/pcs-xpcs.c

@@ -64,6 +64,16 @@ static const int xpcs_xlgmii_features[] = {
 	__ETHTOOL_LINK_MODE_MASK_NBITS,
 };
 
+static const int xpcs_10gbaser_features[] = {
+	ETHTOOL_LINK_MODE_Pause_BIT,
+	ETHTOOL_LINK_MODE_Asym_Pause_BIT,
+	ETHTOOL_LINK_MODE_10000baseSR_Full_BIT,
+	ETHTOOL_LINK_MODE_10000baseLR_Full_BIT,
+	ETHTOOL_LINK_MODE_10000baseLRM_Full_BIT,
+	ETHTOOL_LINK_MODE_10000baseER_Full_BIT,
+	__ETHTOOL_LINK_MODE_MASK_NBITS,
+};
+
 static const int xpcs_sgmii_features[] = {
 	ETHTOOL_LINK_MODE_Pause_BIT,
 	ETHTOOL_LINK_MODE_Asym_Pause_BIT,
@@ -106,6 +116,10 @@ static const phy_interface_t xpcs_xlgmii_interfaces[] = {
 	PHY_INTERFACE_MODE_XLGMII,
 };
 
+static const phy_interface_t xpcs_10gbaser_interfaces[] = {
+	PHY_INTERFACE_MODE_10GBASER,
+};
+
 static const phy_interface_t xpcs_sgmii_interfaces[] = {
 	PHY_INTERFACE_MODE_SGMII,
 };
@@ -123,6 +137,7 @@ enum {
 	DW_XPCS_USXGMII,
 	DW_XPCS_10GKR,
 	DW_XPCS_XLGMII,
+	DW_XPCS_10GBASER,
 	DW_XPCS_SGMII,
 	DW_XPCS_1000BASEX,
 	DW_XPCS_2500BASEX,
@@ -246,6 +261,7 @@ static int xpcs_soft_reset(struct dw_xpcs *xpcs,
 
 	switch (compat->an_mode) {
 	case DW_AN_C73:
+	case DW_10GBASER:
 		dev = MDIO_MMD_PCS;
 		break;
 	case DW_AN_C37_SGMII:
@@ -802,6 +818,8 @@ int xpcs_do_config(struct dw_xpcs *xpcs, phy_interface_t interface,
 		return -ENODEV;
 
 	switch (compat->an_mode) {
+	case DW_10GBASER:
+		break;
 	case DW_AN_C73:
 		if (test_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, advertising)) {
 			ret = xpcs_config_aneg_c73(xpcs, compat);
@@ -998,6 +1016,9 @@ static void xpcs_get_state(struct phylink_pcs *pcs,
 		return;
 
 	switch (compat->an_mode) {
+	case DW_10GBASER:
+		phylink_mii_c45_pcs_get_state(xpcs->mdiodev, state);
+		break;
 	case DW_AN_C73:
 		ret = xpcs_get_state_c73(xpcs, state, compat);
 		if (ret) {
@@ -1153,6 +1174,12 @@ static const struct xpcs_compat synopsys_xpcs_compat[DW_XPCS_INTERFACE_MAX] = {
 		.num_interfaces = ARRAY_SIZE(xpcs_xlgmii_interfaces),
 		.an_mode = DW_AN_C73,
 	},
+	[DW_XPCS_10GBASER] = {
+		.supported = xpcs_10gbaser_features,
+		.interface = xpcs_10gbaser_interfaces,
+		.num_interfaces = ARRAY_SIZE(xpcs_10gbaser_interfaces),
+		.an_mode = DW_10GBASER,
+	},
 	[DW_XPCS_SGMII] = {
 		.supported = xpcs_sgmii_features,
 		.interface = xpcs_sgmii_interfaces,
@@ -1256,6 +1283,9 @@ static struct dw_xpcs *xpcs_create(struct mdio_device *mdiodev,
 		}
 
 		xpcs->pcs.ops = &xpcs_phylink_ops;
+		if (compat->an_mode == DW_10GBASER)
+			return xpcs;
+
 		xpcs->pcs.poll = true;
 
 		ret = xpcs_soft_reset(xpcs, compat);

include/linux/pcs/pcs-xpcs.h

@@ -18,6 +18,7 @@
 #define DW_AN_C37_SGMII			2
 #define DW_2500BASEX			3
 #define DW_AN_C37_1000BASEX		4
+#define DW_10GBASER			5
 
 struct xpcs_id;