Commit b64b0d1e authored by Jesper Dangaard Brouer's avatar Jesper Dangaard Brouer Committed by David S. Miller

pktgen: new pktgen helper functions for samples scripts

Preparing for removing existing samples/pktgen/ scripts, and
replacing these with easier to use samples.

This commit provides two helper shell files, that can
be "included" by shell source'ing. Namely "functions.sh"
and "parameters.sh".

The parameters.sh file support easy and consistant parameter
parsing across the sample scripts.  Usage example is printed on
errors.

The functions.sh file provides, three new shell functions for
configuring the different components of pktgen: pg_ctrl(),
pg_thread() and pg_set().  A slightly improved version of the old
pgset() function is also provided for backwards compat.

The new functions correspond to pktgens different components.
 * pg_ctrl()   control "pgctrl" (/proc/net/pktgen/pgctrl)
 * pg_thread() control the kernel threads and binding to devices
 * pg_set()    control setup of individual devices

These changes are borrowed from:
 https://github.com/netoptimizer/network-testing/tree/master/pktgenSigned-off-by: default avatarJesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 40207264
Sample and benchmark scripts for pktgen (packet generator)
==========================================================
This directory contains some pktgen sample and benchmark scripts, that
can easily be copied and adjusted for your own use-case.
General doc is located in kernel: Documentation/networking/pktgen.txt
Helper include files
====================
This directory contains two helper shell files, that can be "included"
by shell source'ing. Namely "functions.sh" and "parameters.sh".
Common parameters
-----------------
The parameters.sh file support easy and consistant parameter parsing
across the sample scripts. Usage example is printed on errors::
Usage: ./pktgen_sample01_simple.sh [-vx] -i ethX
-i : ($DEV) output interface/device (required)
-s : ($PKT_SIZE) packet size
-d : ($DEST_IP) destination IP
-m : ($DST_MAC) destination MAC-addr
-t : ($THREADS) threads to start
-c : ($SKB_CLONE) SKB clones send before alloc new SKB
-b : ($BURST) HW level bursting of SKBs
-v : ($VERBOSE) verbose
-x : ($DEBUG) debug
The global variable being set is also listed. E.g. the required
interface/device parameter "-i" sets variable $DEV.
Common functions
----------------
The functions.sh file provides; Three different shell functions for
configuring the different components of pktgen: pg_ctrl(), pg_thread()
and pg_set().
These functions correspond to pktgens different components.
* pg_ctrl() control "pgctrl" (/proc/net/pktgen/pgctrl)
* pg_thread() control the kernel threads and binding to devices
* pg_set() control setup of individual devices
See sample scripts for usage examples.
#
# Common functions used by pktgen scripts
# - Depending on bash 3 (or higher) syntax
#
# Author: Jesper Dangaaard Brouer
# License: GPL
## -- General shell logging cmds --
function err() {
local exitcode=$1
shift
echo "ERROR: $@" >&2
exit $exitcode
}
function warn() {
echo "WARN : $@" >&2
}
function info() {
if [[ -n "$VERBOSE" ]]; then
echo "INFO : $@" >&2
fi
}
## -- Pktgen proc config commands -- ##
export PROC_DIR=/proc/net/pktgen
#
# Three different shell functions for configuring the different
# components of pktgen:
# pg_ctrl(), pg_thread() and pg_set().
#
# These functions correspond to pktgens different components.
# * pg_ctrl() control "pgctrl" (/proc/net/pktgen/pgctrl)
# * pg_thread() control the kernel threads and binding to devices
# * pg_set() control setup of individual devices
function pg_ctrl() {
local proc_file="pgctrl"
proc_cmd ${proc_file} "$@"
}
function pg_thread() {
local thread=$1
local proc_file="kpktgend_${thread}"
shift
proc_cmd ${proc_file} "$@"
}
function pg_set() {
local dev=$1
local proc_file="$dev"
shift
proc_cmd ${proc_file} "$@"
}
# More generic replacement for pgset(), that does not depend on global
# variable for proc file.
function proc_cmd() {
local result
local proc_file=$1
# after shift, the remaining args are contained in $@
shift
local proc_ctrl=${PROC_DIR}/$proc_file
if [[ ! -e "$proc_ctrl" ]]; then
err 3 "proc file:$proc_ctrl does not exists (dev added to thread?)"
else
if [[ ! -w "$proc_ctrl" ]]; then
err 4 "proc file:$proc_ctrl not writable, not root?!"
fi
fi
if [[ "$DEBUG" == "yes" ]]; then
echo "cmd: $@ > $proc_ctrl"
fi
# Quoting of "$@" is important for space expansion
echo "$@" > "$proc_ctrl"
local status=$?
result=$(grep "Result: OK:" $proc_ctrl)
# Due to pgctrl, cannot use exit code $? from grep
if [[ "$result" == "" ]]; then
grep "Result:" $proc_ctrl >&2
fi
if (( $status != 0 )); then
err 5 "Write error($status) occurred cmd: \"$@ > $proc_ctrl\""
fi
}
# Old obsolete "pgset" function, with slightly improved err handling
function pgset() {
local result
if [[ "$DEBUG" == "yes" ]]; then
echo "cmd: $1 > $PGDEV"
fi
echo $1 > $PGDEV
local status=$?
result=`cat $PGDEV | fgrep "Result: OK:"`
if [[ "$result" == "" ]]; then
cat $PGDEV | fgrep Result:
fi
if (( $status != 0 )); then
err 5 "Write error($status) occurred cmd: \"$1 > $PGDEV\""
fi
}
## -- General shell tricks --
function root_check_run_with_sudo() {
# Trick so, program can be run as normal user, will just use "sudo"
# call as root_check_run_as_sudo "$@"
if [ "$EUID" -ne 0 ]; then
if [ -x $0 ]; then # Directly executable use sudo
info "Not root, running with sudo"
sudo "$0" "$@"
exit $?
fi
err 4 "cannot perform sudo run of $0"
fi
}
#
# Common parameter parsing for pktgen scripts
#
function usage() {
echo ""
echo "Usage: $0 [-vx] -i ethX"
echo " -i : (\$DEV) output interface/device (required)"
echo " -s : (\$PKT_SIZE) packet size"
echo " -d : (\$DEST_IP) destination IP"
echo " -m : (\$DST_MAC) destination MAC-addr"
echo " -t : (\$THREADS) threads to start"
echo " -c : (\$SKB_CLONE) SKB clones send before alloc new SKB"
echo " -b : (\$BURST) HW level bursting of SKBs"
echo " -v : (\$VERBOSE) verbose"
echo " -x : (\$DEBUG) debug"
echo ""
}
## --- Parse command line arguments / parameters ---
## echo "Commandline options:"
while getopts "s:i:d:m:t:c:b:vxh" option; do
case $option in
i) # interface
export DEV=$OPTARG
info "Output device set to: DEV=$DEV"
;;
s)
export PKT_SIZE=$OPTARG
info "Packet size set to: PKT_SIZE=$PKT_SIZE bytes"
;;
d) # destination IP
export DEST_IP=$OPTARG
info "Destination IP set to: DEST_IP=$DEST_IP"
;;
m) # MAC
export DST_MAC=$OPTARG
info "Destination MAC set to: DST_MAC=$DST_MAC"
;;
t)
export THREADS=$OPTARG
export CPU_THREADS=$OPTARG
let "CPU_THREADS -= 1"
info "Number of threads to start: $THREADS (0 to $CPU_THREADS)"
;;
c)
export CLONE_SKB=$OPTARG
info "CLONE_SKB=$CLONE_SKB"
;;
b)
export BURST=$OPTARG
info "SKB bursting: BURST=$BURST"
;;
v)
export VERBOSE=yes
info "Verbose mode: VERBOSE=$VERBOSE"
;;
x)
export DEBUG=yes
info "Debug mode: DEBUG=$DEBUG"
;;
h|?|*)
usage;
err 2 "[ERROR] Unknown parameters!!!"
esac
done
shift $(( $OPTIND - 1 ))
if [ -z "$PKT_SIZE" ]; then
# NIC adds 4 bytes CRC
export PKT_SIZE=60
info "Default packet size set to: set to: $PKT_SIZE bytes"
fi
if [ -z "$THREADS" ]; then
# Zero CPU threads means one thread, because CPU numbers are zero indexed
export CPU_THREADS=0
export THREADS=1
fi
if [ -z "$DEV" ]; then
usage
err 2 "Please specify output device"
fi
if [ -z "$DST_MAC" ]; then
warn "Missing destination MAC address"
fi
if [ -z "$DEST_IP" ]; then
warn "Missing destination IP address"
fi
if [ ! -d /proc/net/pktgen ]; then
info "Loading kernel module: pktgen"
modprobe pktgen
fi
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment