Merge tag 'for-linus-20140716' of git://git.infradead.org/linux-mtd

Pull MTD fixes from Brian Norris:

 - Fix ELM suspend/resume

 - Reduce warnings if NAND ECC is too weak

 - Add CFI support for Sharp LH28F640BF NOR

   The last fix is coming in because other commits in the 3.16 cycle
   depended on this support.

* tag 'for-linus-20140716' of git://git.infradead.org/linux-mtd:
  mtd: cfi_cmdset_0001.c: add support for Sharp LH28F640BF NOR
  mtd: nand: reduce the warning noise when the ECC is too weak
  mtd: devices: elm: fix elm_context_save() and elm_context_restore() functions

drivers/mtd/chips/cfi_cmdset_0001.c

@@ -52,6 +52,11 @@
 /* Atmel chips */
 #define AT49BV640D	0x02de
 #define AT49BV640DT	0x02db
+/* Sharp chips */
+#define LH28F640BFHE_PTTL90	0x00b0
+#define LH28F640BFHE_PBTL90	0x00b1
+#define LH28F640BFHE_PTTL70A	0x00b2
+#define LH28F640BFHE_PBTL70A	0x00b3
 
 static int cfi_intelext_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
 static int cfi_intelext_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
@@ -258,6 +263,36 @@ static void fixup_st_m28w320cb(struct mtd_info *mtd)
 		(cfi->cfiq->EraseRegionInfo[1] & 0xffff0000) | 0x3e;
 };
 
+static int is_LH28F640BF(struct cfi_private *cfi)
+{
+	/* Sharp LH28F640BF Family */
+	if (cfi->mfr == CFI_MFR_SHARP && (
+	    cfi->id == LH28F640BFHE_PTTL90 || cfi->id == LH28F640BFHE_PBTL90 ||
+	    cfi->id == LH28F640BFHE_PTTL70A || cfi->id == LH28F640BFHE_PBTL70A))
+		return 1;
+	return 0;
+}
+
+static void fixup_LH28F640BF(struct mtd_info *mtd)
+{
+	struct map_info *map = mtd->priv;
+	struct cfi_private *cfi = map->fldrv_priv;
+	struct cfi_pri_intelext *extp = cfi->cmdset_priv;
+
+	/* Reset the Partition Configuration Register on LH28F640BF
+	 * to a single partition (PCR = 0x000): PCR is embedded into A0-A15. */
+	if (is_LH28F640BF(cfi)) {
+		printk(KERN_INFO "Reset Partition Config. Register: 1 Partition of 4 planes\n");
+		map_write(map, CMD(0x60), 0);
+		map_write(map, CMD(0x04), 0);
+
+		/* We have set one single partition thus
+		 * Simultaneous Operations are not allowed */
+		printk(KERN_INFO "cfi_cmdset_0001: Simultaneous Operations disabled\n");
+		extp->FeatureSupport &= ~512;
+	}
+}
+
 static void fixup_use_point(struct mtd_info *mtd)
 {
 	struct map_info *map = mtd->priv;
@@ -309,6 +344,8 @@ static struct cfi_fixup cfi_fixup_table[] = {
 	{ CFI_MFR_ST, 0x00ba, /* M28W320CT */ fixup_st_m28w320ct },
 	{ CFI_MFR_ST, 0x00bb, /* M28W320CB */ fixup_st_m28w320cb },
 	{ CFI_MFR_INTEL, CFI_ID_ANY, fixup_unlock_powerup_lock },
+	{ CFI_MFR_SHARP, CFI_ID_ANY, fixup_unlock_powerup_lock },
+	{ CFI_MFR_SHARP, CFI_ID_ANY, fixup_LH28F640BF },
 	{ 0, 0, NULL }
 };
 
@@ -1649,6 +1686,12 @@ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
 	initial_adr = adr;
 	cmd_adr = adr & ~(wbufsize-1);
 
+	/* Sharp LH28F640BF chips need the first address for the
+	 * Page Buffer Program command. See Table 5 of
+	 * LH28F320BF, LH28F640BF, LH28F128BF Series (Appendix FUM00701) */
+	if (is_LH28F640BF(cfi))
+		cmd_adr = adr;
+
 	/* Let's determine this according to the interleave only once */
 	write_cmd = (cfi->cfiq->P_ID != P_ID_INTEL_PERFORMANCE) ? CMD(0xe8) : CMD(0xe9);
 

drivers/mtd/devices/elm.c

@@ -475,6 +475,7 @@ static int elm_context_save(struct elm_info *info)
 					ELM_SYNDROME_FRAGMENT_1 + offset);
 			regs->elm_syndrome_fragment_0[i] = elm_read_reg(info,
 					ELM_SYNDROME_FRAGMENT_0 + offset);
+			break;
 		default:
 			return -EINVAL;
 		}
@@ -520,6 +521,7 @@ static int elm_context_restore(struct elm_info *info)
 					regs->elm_syndrome_fragment_1[i]);
 			elm_write_reg(info, ELM_SYNDROME_FRAGMENT_0 + offset,
 					regs->elm_syndrome_fragment_0[i]);
+			break;
 		default:
 			return -EINVAL;
 		}

drivers/mtd/nand/nand_base.c

@@ -4047,8 +4047,10 @@ int nand_scan_tail(struct mtd_info *mtd)
 		ecc->layout->oobavail += ecc->layout->oobfree[i].length;
 	mtd->oobavail = ecc->layout->oobavail;
 
-	/* ECC sanity check: warn noisily if it's too weak */
-	WARN_ON(!nand_ecc_strength_good(mtd));
+	/* ECC sanity check: warn if it's too weak */
+	if (!nand_ecc_strength_good(mtd))
+		pr_warn("WARNING: %s: the ECC used on your system is too weak compared to the one required by the NAND chip\n",
+			mtd->name);
 
 	/*
 	 * Set the number of read / write steps for one page depending on ECC