ath11k: Use host CE parameters for CE interrupts configuration

CE interrupt configuration uses host ce parameters to assign/free
interrupts. Use host ce parameters to enable/disable interrupts.
This patch fixes below BUG,

BUG: KASAN: global-out-of-bounds in 0xffffffbffdfb035c at addr
ffffffbffde6eeac
 Read of size 4 by task kworker/u8:2/132
 Address belongs to variable ath11k_core_qmi_firmware_ready+0x1b0/0x5bc [ath11k]

OOB is due to ath11k_ahb_ce_irqs_enable() iterates ce_count(which is 12)
times and accessing 12th element in target_ce_config
(which has only 11 elements) from ath11k_ahb_ce_irq_enable().

With this change host ce configs are used to enable/disable interrupts.

Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-00471-QCAHKSWPL_SILICONZ-1

Fixes: 967c1d11 ("ath11k: move target ce configs to hw_params")
Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1637249558-12793-1-git-send-email-akolli@codeaurora.org

drivers/net/wireless/ath/ath11k/ahb.c

@@ -206,13 +206,13 @@ static void ath11k_ahb_clearbit32(struct ath11k_base *ab, u8 bit, u32 offset)
 
 static void ath11k_ahb_ce_irq_enable(struct ath11k_base *ab, u16 ce_id)
 {
-	const struct ce_pipe_config *ce_config;
+	const struct ce_attr *ce_attr;
 
-	ce_config = &ab->hw_params.target_ce_config[ce_id];
-	if (__le32_to_cpu(ce_config->pipedir) & PIPEDIR_OUT)
+	ce_attr = &ab->hw_params.host_ce_config[ce_id];
+	if (ce_attr->src_nentries)
 		ath11k_ahb_setbit32(ab, ce_id, CE_HOST_IE_ADDRESS);
 
-	if (__le32_to_cpu(ce_config->pipedir) & PIPEDIR_IN) {
+	if (ce_attr->dest_nentries) {
 		ath11k_ahb_setbit32(ab, ce_id, CE_HOST_IE_2_ADDRESS);
 		ath11k_ahb_setbit32(ab, ce_id + CE_HOST_IE_3_SHIFT,
 				    CE_HOST_IE_3_ADDRESS);
@@ -221,13 +221,13 @@ static void ath11k_ahb_ce_irq_enable(struct ath11k_base *ab, u16 ce_id)
 
 static void ath11k_ahb_ce_irq_disable(struct ath11k_base *ab, u16 ce_id)
 {
-	const struct ce_pipe_config *ce_config;
+	const struct ce_attr *ce_attr;
 
-	ce_config = &ab->hw_params.target_ce_config[ce_id];
-	if (__le32_to_cpu(ce_config->pipedir) & PIPEDIR_OUT)
+	ce_attr = &ab->hw_params.host_ce_config[ce_id];
+	if (ce_attr->src_nentries)
 		ath11k_ahb_clearbit32(ab, ce_id, CE_HOST_IE_ADDRESS);
 
-	if (__le32_to_cpu(ce_config->pipedir) & PIPEDIR_IN) {
+	if (ce_attr->dest_nentries) {
 		ath11k_ahb_clearbit32(ab, ce_id, CE_HOST_IE_2_ADDRESS);
 		ath11k_ahb_clearbit32(ab, ce_id + CE_HOST_IE_3_SHIFT,
 				      CE_HOST_IE_3_ADDRESS);