Merge tag 'omap-for-v3.9/gpmc-signed' of...

Merge tag 'omap-for-v3.9/gpmc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/drivers

From Tony Lindgren:
OMAP GPMC (General Purpose Memory Controller) changes to add
device tree bindings.

* tag 'omap-for-v3.9/gpmc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP2+: gpmc: Add device tree documentation for elm handle
  ARM: OMAP2+: gpmc: add DT bindings for OneNAND
  ARM: OMAP2+: gpmc-onenand: drop __init annotation
  mtd: omap-onenand: pass device_node in platform data
  ARM: OMAP2+: Prevent potential crash if GPMC probe fails
  ARM: OMAP2+: gpmc: Remove unneeded of_node_put()
  ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND
  ARM: OMAP: gpmc: enable hwecc for AM33xx SoCs
  ARM: OMAP: gpmc-nand: drop __init annotation
  mtd: omap-nand: pass device_node in platform data
  ARM: OMAP: gpmc: don't create devices from initcall on DT
Signed-off-by: Olof Johansson <olof@lixom.net>

Documentation/devicetree/bindings/bus/ti-gpmc.txt

+Device tree bindings for OMAP general purpose memory controllers (GPMC)
+
+The actual devices are instantiated from the child nodes of a GPMC node.
+
+Required properties:
+
+ - compatible:		Should be set to one of the following:
+
+			ti,omap2420-gpmc (omap2420)
+			ti,omap2430-gpmc (omap2430)
+			ti,omap3430-gpmc (omap3430 & omap3630)
+			ti,omap4430-gpmc (omap4430 & omap4460 & omap543x)
+			ti,am3352-gpmc   (am335x devices)
+
+ - reg:			A resource specifier for the register space
+			(see the example below)
+ - ti,hwmods:		Should be set to "ti,gpmc" until the DT transition is
+			completed.
+ - #address-cells:	Must be set to 2 to allow memory address translation
+ - #size-cells:		Must be set to 1 to allow CS address passing
+ - gpmc,num-cs:		The maximum number of chip-select lines that controller
+			can support.
+ - gpmc,num-waitpins:	The maximum number of wait pins that controller can
+			support.
+ - ranges:		Must be set up to reflect the memory layout with four
+			integer values for each chip-select line in use:
+
+			   <cs-number> 0 <physical address of mapping> <size>
+
+			Currently, calculated values derived from the contents
+			of the per-CS register GPMC_CONFIG7 (as set up by the
+			bootloader) are used for the physical address decoding.
+			As this will change in the future, filling correct
+			values here is a requirement.
+
+Timing properties for child nodes. All are optional and default to 0.
+
+ - gpmc,sync-clk:	Minimum clock period for synchronous mode, in picoseconds
+
+ Chip-select signal timings corresponding to GPMC_CONFIG2:
+ - gpmc,cs-on:		Assertion time
+ - gpmc,cs-rd-off:	Read deassertion time
+ - gpmc,cs-wr-off:	Write deassertion time
+
+ ADV signal timings corresponding to GPMC_CONFIG3:
+ - gpmc,adv-on:		Assertion time
+ - gpmc,adv-rd-off:	Read deassertion time
+ - gpmc,adv-wr-off:	Write deassertion time
+
+ WE signals timings corresponding to GPMC_CONFIG4:
+ - gpmc,we-on:		Assertion time
+ - gpmc,we-off:		Deassertion time
+
+ OE signals timings corresponding to GPMC_CONFIG4:
+ - gpmc,oe-on:		Assertion time
+ - gpmc,oe-off:		Deassertion time
+
+ Access time and cycle time timings corresponding to GPMC_CONFIG5:
+ - gpmc,page-burst-access: Multiple access word delay
+ - gpmc,access:		Start-cycle to first data valid delay
+ - gpmc,rd-cycle:	Total read cycle time
+ - gpmc,wr-cycle:	Total write cycle time
+
+The following are only applicable to OMAP3+ and AM335x:
+ - gpmc,wr-access
+ - gpmc,wr-data-mux-bus
+
+
+Example for an AM33xx board:
+
+	gpmc: gpmc@50000000 {
+		compatible = "ti,am3352-gpmc";
+		ti,hwmods = "gpmc";
+		reg = <0x50000000 0x2000>;
+		interrupts = <100>;
+
+		gpmc,num-cs = <8>;
+		gpmc,num-waitpins = <2>;
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 0x08000000 0x10000000>; /* CS0 @addr 0x8000000, size 0x10000000 */
+
+		/* child nodes go here */
+	};

Documentation/devicetree/bindings/mtd/gpmc-nand.txt

+Device tree bindings for GPMC connected NANDs
+
+GPMC connected NAND (found on OMAP boards) are represented as child nodes of
+the GPMC controller with a name of "nand".
+
+All timing relevant properties as well as generic gpmc child properties are
+explained in a separate documents - please refer to
+Documentation/devicetree/bindings/bus/ti-gpmc.txt
+
+For NAND specific properties such as ECC modes or bus width, please refer to
+Documentation/devicetree/bindings/mtd/nand.txt
+
+
+Required properties:
+
+ - reg:		The CS line the peripheral is connected to
+
+Optional properties:
+
+ - nand-bus-width: 		Set this numeric value to 16 if the hardware
+				is wired that way. If not specified, a bus
+				width of 8 is assumed.
+
+ - ti,nand-ecc-opt:		A string setting the ECC layout to use. One of:
+
+		"sw"		Software method (default)
+		"hw"		Hardware method
+		"hw-romcode"	gpmc hamming mode method & romcode layout
+		"bch4"		4-bit BCH ecc code
+		"bch8"		8-bit BCH ecc code
+
+ - elm_id:	Specifies elm device node. This is required to support BCH
+ 		error correction using ELM module.
+
+For inline partiton table parsing (optional):
+
+ - #address-cells: should be set to 1
+ - #size-cells: should be set to 1
+
+Example for an AM33xx board:
+
+	gpmc: gpmc@50000000 {
+		compatible = "ti,am3352-gpmc";
+		ti,hwmods = "gpmc";
+		reg = <0x50000000 0x1000000>;
+		interrupts = <100>;
+		gpmc,num-cs = <8>;
+		gpmc,num-waitpins = <2>;
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 0x08000000 0x2000>;	/* CS0: NAND */
+		elm_id = <&elm>;
+
+		nand@0,0 {
+			reg = <0 0 0>; /* CS0, offset 0 */
+			nand-bus-width = <16>;
+			ti,nand-ecc-opt = "bch8";
+
+			gpmc,sync-clk = <0>;
+			gpmc,cs-on = <0>;
+			gpmc,cs-rd-off = <44>;
+			gpmc,cs-wr-off = <44>;
+			gpmc,adv-on = <6>;
+			gpmc,adv-rd-off = <34>;
+			gpmc,adv-wr-off = <44>;
+			gpmc,we-off = <40>;
+			gpmc,oe-off = <54>;
+			gpmc,access = <64>;
+			gpmc,rd-cycle = <82>;
+			gpmc,wr-cycle = <82>;
+			gpmc,wr-access = <40>;
+			gpmc,wr-data-mux-bus = <0>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			/* partitions go here */
+		};
+	};
+

Documentation/devicetree/bindings/mtd/gpmc-onenand.txt

+Device tree bindings for GPMC connected OneNANDs
+
+GPMC connected OneNAND (found on OMAP boards) are represented as child nodes of
+the GPMC controller with a name of "onenand".
+
+All timing relevant properties as well as generic gpmc child properties are
+explained in a separate documents - please refer to
+Documentation/devicetree/bindings/bus/ti-gpmc.txt
+
+Required properties:
+
+ - reg:			The CS line the peripheral is connected to
+
+Optional properties:
+
+ - dma-channel:		DMA Channel index
+
+For inline partiton table parsing (optional):
+
+ - #address-cells: should be set to 1
+ - #size-cells: should be set to 1
+
+Example for an OMAP3430 board:
+
+	gpmc: gpmc@6e000000 {
+		compatible = "ti,omap3430-gpmc";
+		ti,hwmods = "gpmc";
+		reg = <0x6e000000 0x1000000>;
+		interrupts = <20>;
+		gpmc,num-cs = <8>;
+		gpmc,num-waitpins = <4>;
+		#address-cells = <2>;
+		#size-cells = <1>;
+
+		onenand@0 {
+			reg = <0 0 0>; /* CS0, offset 0 */
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			/* partitions go here */
+		};
+	};

arch/arm/mach-omap2/gpmc-nand.c

@@ -89,20 +89,21 @@ static int omap2_nand_gpmc_retime(
 	return 0;
 }
 
-static bool __init gpmc_hwecc_bch_capable(enum omap_ecc ecc_opt)
+static bool gpmc_hwecc_bch_capable(enum omap_ecc ecc_opt)
 {
 	/* support only OMAP3 class */
-	if (!cpu_is_omap34xx()) {
+	if (!cpu_is_omap34xx() && !soc_is_am33xx()) {
 		pr_err("BCH ecc is not supported on this CPU\n");
 		return 0;
 	}
 
 	/*
-	 * For now, assume 4-bit mode is only supported on OMAP3630 ES1.x, x>=1.
-	 * Other chips may be added if confirmed to work.
+	 * For now, assume 4-bit mode is only supported on OMAP3630 ES1.x, x>=1
+	 * and AM33xx derivates. Other chips may be added if confirmed to work.
 	 */
 	if ((ecc_opt == OMAP_ECC_BCH4_CODE_HW) &&
-	    (!cpu_is_omap3630() || (GET_OMAP_REVISION() == 0))) {
+	    (!cpu_is_omap3630() || (GET_OMAP_REVISION() == 0)) &&
+	    (!soc_is_am33xx())) {
 		pr_err("BCH 4-bit mode is not supported on this CPU\n");
 		return 0;
 	}
@@ -110,8 +111,8 @@ static bool __init gpmc_hwecc_bch_capable(enum omap_ecc ecc_opt)
 	return 1;
 }
 
-int __init gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data,
-			  struct gpmc_timings *gpmc_t)
+int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data,
+		   struct gpmc_timings *gpmc_t)
 {
 	int err	= 0;
 	struct device *dev = &gpmc_nand_device.dev;

arch/arm/mach-omap2/gpmc-onenand.c

@@ -356,7 +356,7 @@ static int gpmc_onenand_setup(void __iomem *onenand_base, int *freq_ptr)
 	return ret;
 }
 
-void __init gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data)
+void gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data)
 {
 	int err;
 

arch/arm/mach-omap2/gpmc.c

@@ -25,6 +25,10 @@
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_mtd.h>
+#include <linux/of_device.h>
+#include <linux/mtd/nand.h>
 
 #include <linux/platform_data/mtd-nand-omap2.h>
 
@@ -34,6 +38,8 @@
 #include "common.h"
 #include "omap_device.h"
 #include "gpmc.h"
+#include "gpmc-nand.h"
+#include "gpmc-onenand.h"
 
 #define	DEVICE_NAME		"omap-gpmc"
 
@@ -145,7 +151,8 @@ static unsigned gpmc_irq_start;
 static struct resource	gpmc_mem_root;
 static struct resource	gpmc_cs_mem[GPMC_CS_NUM];
 static DEFINE_SPINLOCK(gpmc_mem_lock);
-static unsigned int gpmc_cs_map;	/* flag for cs which are initialized */
+/* Define chip-selects as reserved by default until probe completes */
+static unsigned int gpmc_cs_map = ((1 << GPMC_CS_NUM) - 1);
 static struct device *gpmc_dev;
 static int gpmc_irq;
 static resource_size_t phys_base, mem_size;
@@ -1118,9 +1125,216 @@ int gpmc_calc_timings(struct gpmc_timings *gpmc_t,
 	/* TODO: remove, see function definition */
 	gpmc_convert_ps_to_ns(gpmc_t);
 
+	/* Now the GPMC is initialised, unreserve the chip-selects */
+	gpmc_cs_map = 0;
+
 	return 0;
 }
 
+#ifdef CONFIG_OF
+static struct of_device_id gpmc_dt_ids[] = {
+	{ .compatible = "ti,omap2420-gpmc" },
+	{ .compatible = "ti,omap2430-gpmc" },
+	{ .compatible = "ti,omap3430-gpmc" },	/* omap3430 & omap3630 */
+	{ .compatible = "ti,omap4430-gpmc" },	/* omap4430 & omap4460 & omap543x */
+	{ .compatible = "ti,am3352-gpmc" },	/* am335x devices */
+	{ }
+};
+MODULE_DEVICE_TABLE(of, gpmc_dt_ids);
+
+static void __maybe_unused gpmc_read_timings_dt(struct device_node *np,
+						struct gpmc_timings *gpmc_t)
+{
+	u32 val;
+
+	memset(gpmc_t, 0, sizeof(*gpmc_t));
+
+	/* minimum clock period for syncronous mode */
+	if (!of_property_read_u32(np, "gpmc,sync-clk", &val))
+		gpmc_t->sync_clk = val;
+
+	/* chip select timtings */
+	if (!of_property_read_u32(np, "gpmc,cs-on", &val))
+		gpmc_t->cs_on = val;
+
+	if (!of_property_read_u32(np, "gpmc,cs-rd-off", &val))
+		gpmc_t->cs_rd_off = val;
+
+	if (!of_property_read_u32(np, "gpmc,cs-wr-off", &val))
+		gpmc_t->cs_wr_off = val;
+
+	/* ADV signal timings */
+	if (!of_property_read_u32(np, "gpmc,adv-on", &val))
+		gpmc_t->adv_on = val;
+
+	if (!of_property_read_u32(np, "gpmc,adv-rd-off", &val))
+		gpmc_t->adv_rd_off = val;
+
+	if (!of_property_read_u32(np, "gpmc,adv-wr-off", &val))
+		gpmc_t->adv_wr_off = val;
+
+	/* WE signal timings */
+	if (!of_property_read_u32(np, "gpmc,we-on", &val))
+		gpmc_t->we_on = val;
+
+	if (!of_property_read_u32(np, "gpmc,we-off", &val))
+		gpmc_t->we_off = val;
+
+	/* OE signal timings */
+	if (!of_property_read_u32(np, "gpmc,oe-on", &val))
+		gpmc_t->oe_on = val;
+
+	if (!of_property_read_u32(np, "gpmc,oe-off", &val))
+		gpmc_t->oe_off = val;
+
+	/* access and cycle timings */
+	if (!of_property_read_u32(np, "gpmc,page-burst-access", &val))
+		gpmc_t->page_burst_access = val;
+
+	if (!of_property_read_u32(np, "gpmc,access", &val))
+		gpmc_t->access = val;
+
+	if (!of_property_read_u32(np, "gpmc,rd-cycle", &val))
+		gpmc_t->rd_cycle = val;
+
+	if (!of_property_read_u32(np, "gpmc,wr-cycle", &val))
+		gpmc_t->wr_cycle = val;
+
+	/* only for OMAP3430 */
+	if (!of_property_read_u32(np, "gpmc,wr-access", &val))
+		gpmc_t->wr_access = val;
+
+	if (!of_property_read_u32(np, "gpmc,wr-data-mux-bus", &val))
+		gpmc_t->wr_data_mux_bus = val;
+}
+
+#ifdef CONFIG_MTD_NAND
+
+static const char * const nand_ecc_opts[] = {
+	[OMAP_ECC_HAMMING_CODE_DEFAULT]		= "sw",
+	[OMAP_ECC_HAMMING_CODE_HW]		= "hw",
+	[OMAP_ECC_HAMMING_CODE_HW_ROMCODE]	= "hw-romcode",
+	[OMAP_ECC_BCH4_CODE_HW]			= "bch4",
+	[OMAP_ECC_BCH8_CODE_HW]			= "bch8",
+};
+
+static int gpmc_probe_nand_child(struct platform_device *pdev,
+				 struct device_node *child)
+{
+	u32 val;
+	const char *s;
+	struct gpmc_timings gpmc_t;
+	struct omap_nand_platform_data *gpmc_nand_data;
+
+	if (of_property_read_u32(child, "reg", &val) < 0) {
+		dev_err(&pdev->dev, "%s has no 'reg' property\n",
+			child->full_name);
+		return -ENODEV;
+	}
+
+	gpmc_nand_data = devm_kzalloc(&pdev->dev, sizeof(*gpmc_nand_data),
+				      GFP_KERNEL);
+	if (!gpmc_nand_data)
+		return -ENOMEM;
+
+	gpmc_nand_data->cs = val;
+	gpmc_nand_data->of_node = child;
+
+	if (!of_property_read_string(child, "ti,nand-ecc-opt", &s))
+		for (val = 0; val < ARRAY_SIZE(nand_ecc_opts); val++)
+			if (!strcasecmp(s, nand_ecc_opts[val])) {
+				gpmc_nand_data->ecc_opt = val;
+				break;
+			}
+
+	val = of_get_nand_bus_width(child);
+	if (val == 16)
+		gpmc_nand_data->devsize = NAND_BUSWIDTH_16;
+
+	gpmc_read_timings_dt(child, &gpmc_t);
+	gpmc_nand_init(gpmc_nand_data, &gpmc_t);
+
+	return 0;
+}
+#else
+static int gpmc_probe_nand_child(struct platform_device *pdev,
+				 struct device_node *child)
+{
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_MTD_ONENAND
+static int gpmc_probe_onenand_child(struct platform_device *pdev,
+				 struct device_node *child)
+{
+	u32 val;
+	struct omap_onenand_platform_data *gpmc_onenand_data;
+
+	if (of_property_read_u32(child, "reg", &val) < 0) {
+		dev_err(&pdev->dev, "%s has no 'reg' property\n",
+			child->full_name);
+		return -ENODEV;
+	}
+
+	gpmc_onenand_data = devm_kzalloc(&pdev->dev, sizeof(*gpmc_onenand_data),
+					 GFP_KERNEL);
+	if (!gpmc_onenand_data)
+		return -ENOMEM;
+
+	gpmc_onenand_data->cs = val;
+	gpmc_onenand_data->of_node = child;
+	gpmc_onenand_data->dma_channel = -1;
+
+	if (!of_property_read_u32(child, "dma-channel", &val))
+		gpmc_onenand_data->dma_channel = val;
+
+	gpmc_onenand_init(gpmc_onenand_data);
+
+	return 0;
+}
+#else
+static int gpmc_probe_onenand_child(struct platform_device *pdev,
+				    struct device_node *child)
+{
+	return 0;
+}
+#endif
+
+static int gpmc_probe_dt(struct platform_device *pdev)
+{
+	int ret;
+	struct device_node *child;
+	const struct of_device_id *of_id =
+		of_match_device(gpmc_dt_ids, &pdev->dev);
+
+	if (!of_id)
+		return 0;
+
+	for_each_node_by_name(child, "nand") {
+		ret = gpmc_probe_nand_child(pdev, child);
+		if (ret < 0) {
+			of_node_put(child);
+			return ret;
+		}
+	}
+
+	for_each_node_by_name(child, "onenand") {
+		ret = gpmc_probe_onenand_child(pdev, child);
+		if (ret < 0) {
+			of_node_put(child);
+			return ret;
+		}
+	}
+	return 0;
+}
+#else
+static int gpmc_probe_dt(struct platform_device *pdev)
+{
+	return 0;
+}
+#endif
+
 static int gpmc_probe(struct platform_device *pdev)
 {
 	int rc;
@@ -1174,6 +1388,14 @@ static int gpmc_probe(struct platform_device *pdev)
 	if (IS_ERR_VALUE(gpmc_setup_irq()))
 		dev_warn(gpmc_dev, "gpmc_setup_irq failed\n");
 
+	rc = gpmc_probe_dt(pdev);
+	if (rc < 0) {
+		clk_disable_unprepare(gpmc_l3_clk);
+		clk_put(gpmc_l3_clk);
+		dev_err(gpmc_dev, "failed to probe DT parameters\n");
+		return rc;
+	}
+
 	return 0;
 }
 
@@ -1191,6 +1413,7 @@ static struct platform_driver gpmc_driver = {
 	.driver		= {
 		.name	= DEVICE_NAME,
 		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(gpmc_dt_ids),
 	},
 };
 
@@ -1214,6 +1437,13 @@ static int __init omap_gpmc_init(void)
 	struct platform_device *pdev;
 	char *oh_name = "gpmc";
 
+	/*
+	 * if the board boots up with a populated DT, do not
+	 * manually add the device from this initcall
+	 */
+	if (of_have_populated_dt())
+		return -ENODEV;
+
 	oh = omap_hwmod_lookup(oh_name);
 	if (!oh) {
 		pr_err("Could not look up %s\n", oh_name);

drivers/mtd/nand/omap2.c

@@ -1332,6 +1332,7 @@ static int omap_nand_probe(struct platform_device *pdev)
 	dma_cap_mask_t mask;
 	unsigned sig;
 	struct resource			*res;
+	struct mtd_part_parser_data	ppdata = {};
 
 	pdata = pdev->dev.platform_data;
 	if (pdata == NULL) {
@@ -1557,7 +1558,8 @@ static int omap_nand_probe(struct platform_device *pdev)
 		goto out_release_mem_region;
 	}
 
-	mtd_device_parse_register(&info->mtd, NULL, NULL, pdata->parts,
+	ppdata.of_node = pdata->of_node;
+	mtd_device_parse_register(&info->mtd, NULL, &ppdata, pdata->parts,
 				  pdata->nr_parts);
 
 	platform_set_drvdata(pdev, &info->mtd);

drivers/mtd/onenand/omap2.c

@@ -637,6 +637,7 @@ static int omap2_onenand_probe(struct platform_device *pdev)
 	struct onenand_chip *this;
 	int r;
 	struct resource *res;
+	struct mtd_part_parser_data ppdata = {};
 
 	pdata = pdev->dev.platform_data;
 	if (pdata == NULL) {
@@ -767,7 +768,8 @@ static int omap2_onenand_probe(struct platform_device *pdev)
 	if ((r = onenand_scan(&c->mtd, 1)) < 0)
 		goto err_release_regulator;
 
-	r = mtd_device_parse_register(&c->mtd, NULL, NULL,
+	ppdata.of_node = pdata->of_node;
+	r = mtd_device_parse_register(&c->mtd, NULL, &ppdata,
 				      pdata ? pdata->parts : NULL,
 				      pdata ? pdata->nr_parts : 0);
 	if (r)

include/linux/platform_data/mtd-nand-omap2.h

@@ -60,6 +60,8 @@ struct omap_nand_platform_data {
 	int			devsize;
 	enum omap_ecc           ecc_opt;
 	struct gpmc_nand_regs	reg;
-};
 
+	/* for passing the partitions */
+	struct device_node	*of_node;
+};
 #endif

include/linux/platform_data/mtd-onenand-omap2.h

@@ -29,5 +29,8 @@ struct omap_onenand_platform_data {
 	u8			flags;
 	u8			regulator_can_sleep;
 	u8			skip_initial_unlocking;
+
+	/* for passing the partitions */
+	struct device_node	*of_node;
 };
 #endif